Hi,
Phone; SM-AF520F
My phone has been restarting on its own from the past month and I ignored it. It showed me occasionally Google services failed or system UI is not responding.
I factory resetted the phone as any noob would do and the restart occurrence went to only at night, which I was unbothered with. A little time passed and the phone went to the downloading sky blue screen.
I'm aware with flashing roms and stuff but I never really tried it. I tried everything;
i) Used Odin, three different versions
ii) Used Stock firmware, three different versions
iii) Used Smart switch
The phone only went in download phase and than in the phase where you press home button, volume and power and it shows fonts in the left hand corner. Odin always giving me errors, sometimes stucking on setting up connection.
Two errors:
i) There is no PIT partition
ii) Write operation failed
There are always these things happening.
When I restarted with volume down and power key, the system showed, there was an error and try smart switch, updated my drivers but when I go in the settings to emergency recover my phone, it does not show my phone.
After restarting the phone couple of time, Im in downloading mode again, in between the screen also turns full sky blue with no text.
I tried installing custom recovery but the image didn't load, ( I dont know what i am doing at this point, even if this was a good idea).
I have scavanged every forum, every post, everything on the internet but I just can't seem to fix it, I tried every possible thing and it just dosent work. I know it can be fixed but I don't know how. I know I'm doing something stupidly wrong but I can't seem to figure it out.
This is an old phone, I'm going to buy another one soon but I just hope it works for another week? Can I wipe the whole system and start from scratch (Which i dont know how to do).
Any type of help would be greatly appreciated, or just tell me to give up hope on it so I can just throw it away and move on.
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
matkali said:
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
Click to expand...
Click to collapse
Thank you for your response.
I did what you exactly said, previously it failed at the instant, now it moved one tab and than failed.
I tried the provided Odin, than tried two roms with, with the pit filed extracted and enabled re partition.
The error occurred: Complete(write) operation failed.
The error occurred every time I tried to flash, it never worked.
Do you think there is anything else to do?
Try this way to go download mode:
Press vol-down + power until phone restart
Then instantly press vol-up + Home + Power to going to download mode!
If it not works for you! You can use (eMMC programmer or easy JTAG) to writing rom on your phone memory (Last Option)!
I gave up on it and asked for professional help. Idk what he did, but he fixed the phone. It was sluggish at first but it works like a charm now.
It took 7 minutes to turn it on, than It said, there was an authorized user who tried to access your phone, use your previous email password to access your phone. I put it on my previous details and the works okay after some updates.
I wonder what he did? And i never knew android has a feature where if somone tries to reset your phone, google account locks it? Wow.
Is flashing a custom os a good idea? I'm afraid I'll brick it or something or just keep running one ui and wait for it to die again.
Thank you for your help btw, made me learn alot.
matkali said:
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
Click to expand...
Click to collapse
im having the exact same problem this guy has, installing a pit file will erase my data? if i use HOME_CSC will the pictures stay? i only care about the photos.
I tried using the XDA Discord server to get a quick response, but apparently, some people just ignore me or don't even know how to help me. So I will try here...
I was following that tutorial so that I can use Joycon Droid on my phone. I installed TWRP Recovery and gone in his recovery mode. I wiped what the tutorial asked to wipe and began the flash process. Unfortunately, I mistakenly downloaded the flash files on the computer. I tried removing my SD Card and putting inside it the files I need, but TWRP was not able to read any data for the SD Card. So I tried to find a way to cancel the recovery menu, and I did by clicking Reboot System. Since then, my phone was locked in the logo screen. After many attempts, I've gone from the charging screen and finished by the "An error occurred while updating the device software.". I can enter the download mode, but nothing else. My phone is an A520W and I think the root was not properly installed. I researched everywhere without any solution, so I came to this discord server, hoping someone would save my phone. I tried flashing the official A520W OS, but Odin always does a FAIL message or freezes. I later tried to use another firmware file, reinstalled the Samsung USB driver and Odin, and know it says on the Download Mode screen:
SV REV. CHECK FAIL(BOOTLOADER) DEVICE: 9, BINARY 7. (it failed)
Can someone help me? I really need help!
Your phone partition table is crushed probably!
Use emmc programmer to repairing your partitions! (ask from someone expert)
Also, "easy-jtag" may be useful(search this)
matkali said:
Your phone partition table is crushed probably!
Use emmc programmer to repairing your partitions! (ask from someone expert)
Also, "easy-jtag" may be useful(search this)
Click to expand...
Click to collapse
Kay I'll try the easy-jtag, but if it doesn't work, who is an expert at emmc programming stuff?
Is there a way to fix the crushed partition table without buying stuff?
Ok so, I used a certain program that added galaxy s6 data and now it is stuck in bootloop
Akurio64 said:
Ok so, I used a certain program that added galaxy s6 data and now it is stuck in bootloop
Click to expand...
Click to collapse
better than the error screen right? the program name is fonepaw
Akurio64 said:
Ok so, I used a certain program that added galaxy s6 data and now it is stuck in bootloop
Click to expand...
Click to collapse
It is dangerous for your phone, because every phone have different partition table and different architecture!
Pit file in a520w stock firmware have partition table structures information. (use PIT_Magic.exe to see)
In old architecture of Samsung(e.g. s3) when partition table cleaned from emmc (phone internal storage), they use micro sdcard to boot from it! (to identity correct info for Odin) (same boot from USB when you are installing windows.) then by going to download mode they flash stock Rom!
But I suggest to you find one knows enough information and requirements stuffs.
Welcome to this easy guide.
Time needed: 15 / 60min (depends on your internet connection)
Ease of operation: Very easy
Don't be fooled by the length of this guide ... the operations to be done are quick and easy.
NB: I state immediately that this procedure does not restore the state of Knox to 0x0 if by chance you have brought it to 0x1.
To date, this is an irreversible process.
In the next lines we will see how to restore our Samsung device to its original factory conditions, after unlocking the Bootloader, rooting and installing various types of custom installations, such as custom OneUI, AOSP or Google ROM.
It may happen that you want to go back to the original firmware of our Samsung, after trying various custom ROMs, after having rooted and modified the recovery, missing with the phone partitions, lost EFS folder or corrupt IMEI. The reasons can be many. This guide is aimed at all those who, with the classic Odin procedure to install the stock rom, are unable to restore the phone to normal operating conditions.
But it can happen to fail in this thing, even using Odin to put back the original software, Odin himself or the phone can crash to the BOOT partition or generate other errors, with VBMeta or generic errors, including partition ones.
So let's see how to solve all the inconveniences due to modding on our Samsungs to 99%. Let's begin!
- MATERIAL REQUIRED:
Latest version of Frija link
Latest version of Odin link
Samsung USB Driver link
File Manager zip (example 7zip) link
PC with Microsoft Windows 7-8-8.1-10-11
USB type C cable
1 - Download the latest stock firmware for our Samsung:
Download the latest version of Frija and once the program has started, enter the model code of your device and the abbreviation of your CSC.
Make sure the "Auto" checkbox is checked.
Once you have checked everything, click on "Check Update" and click on "Download". Wait for it to download.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once you have downloaded the zip containing the various parts that make up the stock software (see image below), extract it to a folder of your choice. We will have 5 files in total.
2 - Retrieve the original PIT file
To recover the PIT file (partition list) for our device, go to the firmware folder you just downloaded with Frija, locate the "tar.md5" file with the words CSC_OXM_N............., right click on the it and select rename, adding ".zip" at the end to "transform" it into a compressed file that can be opened. This way you will have something like
"CSC_OXM_N975...............REV01_user_low_ship.tar.md5.zip"
Give the Ok and confirm the change of the file extension.
You should now have the same situation as you see in the image below. Total 5 files of which one is a ".zip" files.
Now open the file you just renamed with 7zip, the main window of the 7zip program will open with various files inside:
Now copy the "D2S_EUR_OPEN.pit" file by right clicking and selecting the "copy to ..." item and giving the ok without changing anything. The .PIT file will be copied to the same folder as the previously downloaded firmware.
Once this is done, the folder that appears will look like this (Now, the total files are 6 of which one is a ".zip" files):
Now just put the CSC_OXM ... file back to the previous condition, renaming it one more time and eliminating the ".zip" extension at the end of the name, in order to find an MD5 file again. This will be the file we will have:
"CSC_OXM_N975...............REV01_user_low_ship.tar.md5."
Now we have everything we need. If we have done everything correctly this is the final result (Total 6 files).
3 - Prepare and Configure Odin
Now open the latest version of Odin (as of May 2022 the latest version is 3.14.4), load the corresponding downloaded firmware files in the various slots (BL, AP, CP and CSC) as usual.
In the CSC box, upload the file labeled "CSC_OXM_N975 ............... REV01_user_low_ship.tar.md5."
Did you know that....
The CSC_OXM file is used to restore the internal memory as factory, this will delete all personal data in the phone memory, all applications and data associated with it.
The HOME_CSC_OXM file, on the other hand, will not act in any way on the internal memory. Useful if you want to update while remaining in the same type of ROM. Not recommended if your phone has a Custom ROM installed, as it may not start or give errors in previously installed applications.
If you want to do a clean install of the original ROM, always use the CSC_OMX file!
Click to expand...
Click to collapse
Once this is done, move (still in Odin) to the "Option" tab and check the following items:
Auto Reboot
Nand Erase
Re-partition
F. Reset time
The rest of the items MUST NOT BE SELECTED!
Again in Odin, this time go to the PIT tab, a warning message will appear, give the ok and select the first extracted file which has the unique name "D2S_EUR_OPEN.pit"
If you have done everything right you should have the same situation as the image below:
4 - Return the phone to the original firmware
Connect the USB type C cable to your phone and restart your phone in "Download mode" (check the right combination for your model), or use the Custom Rom to do this, usually all coustom roms or custom recovery offer reboot in Download mode (or Booloader).
In odin in the "Log" tab, you should see the word "Added" with the number of the port to which it is connected (example "0: [COM3]"), if so, press the START key of Odin and wait for the restart (this procedure will delete all data on your device).
If nothing appears, install the Samsung USB drivers and repeat step 4.
5 - Relock the BootLoader
To get rid of that fatal warning message when starting the phone that tells us that the BootLoader is unlocked once and for all, let's put it back in place, relocking the BootLoader.
(Image for demonstration purposes)
Turn off the phone, reconnect the USB cable and immediately press the Volume + and Volume- keys at the same time.
Return to Download mode (albeit a little different), with various options (actually only 3).
In this case, follow the second option (Volume up long press: Device unlock mode) hold down the Volume + key for a few moments until the message "Lock Bootloader?" Appears. To confirm everything, make a single click on Volume + (also in this case the phone will be formatted by the system again) and wait for a complete restart.
6 - Relock OEM (optional but recommended if you want to stick with the Samsung ROM)
Once your phone has restarted and the initial setup is complete, you can also disable the OEM unlock capability and reuse the security features.
To do this, go to Settings / Phone Information / Software Information and tap several times on the wording "Build version" in order to unlock the "Developer options". If prompted, unlock your smartphone with your PIN or sign.
Now go back to the main Settings page, open the Developer Options and check that the "OEM Unlock" item is disabled, otherwise disable it and restart the device.
Well now you have your Samsung with Original firmware again. Enjoy
ExileTM said:
Welcome to this easy guide.
Time needed: 15 / 60min (depends on your internet connection)
Ease of operation: Very easy
Don't be fooled by the length of this guide ... the operations to be done are quick and easy.
NB: I state immediately that this procedure does not restore the state of Knox to 0x0 if by chance you have brought it to 0x1.
To date, this is an irreversible process.
In the next lines we will see how to restore our Samsung device to its original factory conditions, after unlocking the Bootloader, rooting and installing various types of custom installations, such as custom OneUI, AOSP or Google ROM.
It may happen that you want to go back to the original firmware of our Samsung, after trying various custom ROMs, after having rooted and modified the recovery, missing with the phone partitions, lost EFS folder or corrupt IMEI. The reasons can be many. This guide is aimed at all those who, with the classic Odin procedure to install the stock rom, are unable to restore the phone to normal operating conditions.
But it can happen to fail in this thing, even using Odin to put back the original software, Odin himself or the phone can crash to the BOOT partition or generate other errors, with VBMeta or generic errors, including partition ones.
So let's see how to solve all the inconveniences due to modding on our Samsungs to 99%. Let's begin!
- MATERIAL REQUIRED:
Latest version of Frija link
Latest version of Odin link
Samsung USB Driver link
File Manager zip (example 7zip) link
PC with Microsoft Windows 7-8-8.1-10-11
USB type C cable
1 - Download the latest stock firmware for our Samsung:
Download the latest version of Frija and once the program has started, enter the model code of your device and the abbreviation of your CSC.
Make sure the "Auto" checkbox is checked.
Once you have checked everything, click on "Check Update" and click on "Download". Wait for it to download.
View attachment 5628035
Once you have downloaded the zip containing the various parts that make up the stock software (see image below), extract it to a folder of your choice. We will have 5 files in total.
View attachment 5629259
2 - Retrieve the original PIT file
To recover the PIT file (partition list) for our device, go to the firmware folder you just downloaded with Frija, locate the "tar.md5" file with the words CSC_OXM_N............., right click on the it and select rename, adding ".zip" at the end to "transform" it into a compressed file that can be opened. This way you will have something like
"CSC_OXM_N975...............REV01_user_low_ship.tar.md5.zip"
Give the Ok and confirm the change of the file extension.
You should now have the same situation as you see in the image below. Total 5 files of which one is a ".zip" files.
View attachment 5629261
Now open the file you just renamed with 7zip, the main window of the 7zip program will open with various files inside:
View attachment 5628037
Now copy the "D2S_EUR_OPEN.pit" file by right clicking and selecting the "copy to ..." item and giving the ok without changing anything. The .PIT file will be copied to the same folder as the previously downloaded firmware.
View attachment 5629463
Once this is done, the folder that appears will look like this (Now, the total files are 6 of which one is a ".zip" files):
View attachment 5629465
Now just put the CSC_OXM ... file back to the previous condition, renaming it one more time and eliminating the ".zip" extension at the end of the name, in order to find an MD5 file again. This will be the file we will have:
"CSC_OXM_N975...............REV01_user_low_ship.tar.md5."
Now we have everything we need. If we have done everything correctly this is the final result (Total 6 files).
View attachment 5629265
3 - Prepare and Configure Odin
Now open the latest version of Odin (as of May 2022 the latest version is 3.14.4), load the corresponding downloaded firmware files in the various slots (BL, AP, CP and CSC) as usual.
In the CSC box, upload the file labeled "CSC_OXM_N975 ............... REV01_user_low_ship.tar.md5."
Once this is done, move (still in Odin) to the "Option" tab and check the following items:
Auto Reboot
Nand Erase
Re-partition
F. Reset time
The rest of the items MUST NOT BE SELECTED!
View attachment 5628039
Again in Odin, this time go to the PIT tab, a warning message will appear, give the ok and select the first extracted file which has the unique name "D2S_EUR_OPEN.pit"
If you have done everything right you should have the same situation as the image below:
View attachment 5628043
View attachment 5628045
4 - Return the phone to the original firmware
Connect the USB type C cable to your phone and restart your phone in "Download mode" (check the right combination for your model), or use the Custom Rom to do this, usually all coustom roms or custom recovery offer reboot in Download mode (or Booloader).
In odin in the "Log" tab, you should see the word "Added" with the number of the port to which it is connected (example "0: [COM3]"), if so, press the START key of Odin and wait for the restart (this procedure will delete all data on your device).
If nothing appears, install the Samsung USB drivers and repeat step 4.
View attachment 5628041
5 - Relock the BootLoader
To get rid of that fatal warning message when starting the phone that tells us that the BootLoader is unlocked once and for all, let's put it back in place, relocking the BootLoader.
View attachment 5629449
(Image for demonstration purposes)
Turn off the phone, reconnect the USB cable and immediately press the Volume + and Volume- keys at the same time.
Return to Download mode (albeit a little different), with various options (actually only 3).
In this case, follow the second option (Volume up long press: Device unlock mode) hold down the Volume + key for a few moments until the message "Lock Bootloader?" Appears. To confirm everything, make a single click on Volume + (also in this case the phone will be formatted by the system again) and wait for a complete restart.
6 - Relock OEM (optional but recommended if you want to stick with the Samsung ROM)
Once your phone has restarted and the initial setup is complete, you can also disable the OEM unlock capability and reuse the security features.
To do this, go to Settings / Phone Information / Software Information and tap several times on the wording "Build version" in order to unlock the "Developer options". If prompted, unlock your smartphone with your PIN or sign.
Now go back to the main Settings page, open the Developer Options and check that the "OEM Unlock" item is disabled, otherwise disable it and restart the device.
View attachment 5629493
Well now you have your Samsung with Original firmware again. Enjoy
Click to expand...
Click to collapse
Hi there. I tried it and didn't work for me.
Tried with differents CSC too, but my phone doesn't start the system. Just starts the download and recovery mode
It doesn't even show up the charging screen when powered off
Tried so many things and I can't boot my system...
I made a post with the info about what happened:
Need help with semi-bricked Note 10 Plus (SM-N975F) - Stuck on recovery/download mode
Didn't know where to post this exactly, to be honest. This will be a long post I was flashing AOSP roms in the phone. Tried to go back to One UI for the VoLTE thing In one of the AOSP roms I couldn't install it in Lineage Recovery (older version...
forum.xda-developers.com
Please help...
Ok, tell me where you get stuck ... or can you follow the whole guide but then the phone doesn't start?
Is the model number of your Note10+ is SM-N975F?
What original CSC did you have before you root?
RedSpikeJr said:
Hi there. I tried it and didn't work for me.
Tried with differents CSC too, but my phone doesn't start the system. Just starts the download and recovery mode
It doesn't even show up the charging screen when powered off
Tried so many things and I can't boot my system...
I made a post with the info about what happened:
Need help with semi-bricked Note 10 Plus (SM-N975F) - Stuck on recovery/download mode
Didn't know where to post this exactly, to be honest. This will be a long post I was flashing AOSP roms in the phone. Tried to go back to One UI for the VoLTE thing In one of the AOSP roms I couldn't install it in Lineage Recovery (older version...
forum.xda-developers.com
Please help...
Click to expand...
Click to collapse
ExileTM said:
Ok, tell me where you get stuck ... or can you follow the whole guide but then the phone doesn't start?
Is the model number of your Note10+ is SM-N975F?
What original CSC did you have before you root?
Click to expand...
Click to collapse
I followed the full guide, but I got stuck after flashing the firmware in Odin. It shows the screen of "Erasing data", and after that, nothing more
Even after locking again the bootloader
And yes, I ticked what's needed in Odin and used the .pit file
My model it's SM-N975F
The original CSC it's ZTO. Flashed the latest firmware
Ok so with Odin it didn't give you any problem. Let's say he freezes when he does the first boot that does the factory reset. Right?
Well odd, because once the original firmware is installed, I don't see why it should crash on boot ... unless there is a hardware problem in the phone's internal memory.
I know it may sound trivial, but the usb cable you use is good and did you use the latest version of Odin?
Have you checked maybe if the internal memory is right for you. If it is 256Gb or 512Gb
You could try this, if you see that it does not start try to enter the recovery (the original one) and delete everything you can, like cache and do a reset data directly from the recovery. Then try restarting and see if it starts.
If it still doesn't boot, try this thing.
Install TWRP custom recovery and enter once installed.
Go to Wipe Section in TWRP, Repair or Change partition, System and Data, and Changed Ext4 to EXTFAT. And changed back to Ext4. Eventually rerun the guide again.
ExileTM said:
Ok so with Odin it didn't give you any problem. Let's say he freezes when he does the first boot that does the factory reset. Right?
Well odd, because once the original firmware is installed, I don't see why it should crash on boot ... unless there is a hardware problem in the phone's internal memory.
I know it may sound trivial, but the usb cable you use is good and did you use the latest version of Odin?
Have you checked maybe if the internal memory is right for you. If it is 256Gb or 512Gb
Click to expand...
Click to collapse
The USB it's the original from Samsung.
The device is 256GB
ExileTM said:
You could try this, if you see that it does not start try to enter the recovery (the original one) and delete everything you can, like cache and do a reset data directly from the recovery. Then try restarting and see if it starts.
Click to expand...
Click to collapse
Tried this already. Didn't work
ExileTM said:
If it still doesn't boot, try this thing.
Install TWRP custom recovery and enter once installed.
Go to Wipe Section in TWRP, Repair or Change partition, System and Data, and Changed Ext4 to EXTFAT. And changed back to Ext4. Eventually rerun the guide again.
Click to expand...
Click to collapse
I tried this but not in the process of "Do the format and then do the Odin process" so I can try
I'm trying now with USB OTG to know if I can flash the system.img (and know if from there I can solve this)
ExileTM said:
If it still doesn't boot, try this thing.
Install TWRP custom recovery and enter once installed.
Go to Wipe Section in TWRP, Repair or Change partition, System and Data, and Changed Ext4 to EXTFAT. And changed back to Ext4. Eventually rerun the guide again.
Click to expand...
Click to collapse
Tried from reset data on official recovery to doing the change of format in TWRP and the doing all of the process again. No success.
Also tried with USB OTG with system, vendor, product and boot image. Neither
One thing that happened is that when trying to change the system partition to exFAT, it gave an error (system is not mounted) but changed the format to vFAT. Changing it to another option doesn't give that error, so I tried to do with another option and back to ext4.
I don't think it's a physical issue, if turns on, there is some hope at least
There is almost certainly a solution to your problem. (have you tried to do "format data" and typed "yes" in TWRP recovery?). Anyway, it's night at my place now, I'll see tomorrow to think of some other solution.
Tried already. Also tried to format the data with fastboot (Lineage Recovery gives the option to fastboot in Samsung)
I have the exackt same problem with my note10+ with 256GB and dual sim. and the problem you describe is also 100% what i experienced and still have as an issue... If you get to the point where you can solve the issue then please write me my friend. I will do the same ofcourse... btw can you use your pen in TWRP? i can only mark the files but not click them to run...? i have the idea that the TWRP for our model isnt built right somehow..
I assume you haven't solved the problem yet. In these days I have looked around but I have not found much ...
I saw a video, which through the ADB shell a guy was able to find the list of all partitions with the numbers of all the blocks and information and practically managed to rebuild the system partition from scratch, but I don't know if it works on samsung.
This is video:
Then another thing, what procedure did you follow for rooting? You may have had problems during the rooting process.
I followed this guide:
To update the situation
The battery of the phone inflated like a balloon, so I needed to go to a technician. I don't know for sure if that was caused by something physical, but will update when have some news
Ok, let me know if the technician can get you to restart the phone, and out of curiosity, he can bring the knox back to 0.
Hi, I was trying this today and I'm stuck at "An error has occured while updating the device software."
Odin was stuck at product.img for over an hour so I restarted the phone using volume down and power.
I tried again and it keeps getting stuck at product.img while the phone shows this error. Please could you help me out?
I followed all the steps exactly as you said, but I noticed while in download mode that it showed Warranty Void: 1
I did not root the phone, only flashed Pixel Experience and now trying to go back to OneUI
aaaajwedk said:
Hi, I was trying this today and I'm stuck at "An error has occured while updating the device software."
Odin was stuck at product.img for over an hour so I restarted the phone using volume down and power.
I tried again and it keeps getting stuck at product.img while the phone shows this error. Please could you help me out?
I followed all the steps exactly as you said, but I noticed while in download mode that it showed Warranty Void: 1
I did not root the phone, only flashed Pixel Experience and now trying to go back to OneUI
View attachment 5647587
Click to expand...
Click to collapse
Hello, then, the Warranty Void at 1 is triggered when you install a non-original firmware (in this case the PixelExperience), or when you change Recovery (ex: the TWRP) or you run the ROOT.
Any other software that is not in original firmware triggers the Knox to 0x1 irreversibly.
In your specific case, by installing the LineageOS Recovery and the PixelExperence ROM you have triggered the Knox at 0x1.
I am sorry.
Coming to your problem, the model of your phone what it is (ex: SM-N975F) and the CSC (ex: ITV). Did you download the original software for your exact model? Did you extract the PIT file from the original firmware and put it in the Option tab in Odin?
ExileTM said:
Hello, then, the Warranty Void at 1 is triggered when you install a non-original firmware (in this case the PixelExperience), or when you change Recovery (ex: the TWRP) or you run the ROOT.
Any other software that is not in original firmware triggers the Knox to 0x1 irreversibly.
In your specific case, by installing the LineageOS Recovery and the PixelExperence ROM you have triggered the Knox at 0x1.
I am sorry.
Coming to your problem, the model of your phone what it is (ex: SM-N975F) and the CSC (ex: ITV). Did you download the original software for your exact model? Did you extract the PIT file from the original firmware and put it in the Option tab in Odin?
Click to expand...
Click to collapse
Hello, I got it working just now by using a different cable and USB port. The procedure completed and the phone restarted by itself, and now its perfectly fine. Thank you so much for your help.
Yes, the phone is an SM-N975F. Despite Knox being tripped, my banking and payment apps are still working so I'm happy
I'm sure your article will be helpful to many more users. Thank you!
aaaajwedk said:
Hello, I got it working just now by using a different cable and USB port. The procedure completed and the phone restarted by itself, and now its perfectly fine. Thank you so much for your help.
Yes, the phone is an SM-N975F. Despite Knox being tripped, my banking and payment apps are still working so I'm happy
I'm sure your article will be helpful to many more users. Thank you!
Click to expand...
Click to collapse
OK well. Glad it was helpful. Yes, however, until you root all the apps will work. The only one are some applications by Samsung that will no longer work because they are based on the knox.
Otherwise like Google Pay, all banking and account apps, software updates should work smoothly.
Hi, is this guide usable for the S22 snapdragon version? My device is rooted, and I want to back to original firmware.