Related
I get a weird behavior when my G3 reaches full battery while wirelessly charging. The phone and charger connect and disconnects about every 3 seconds.
For comparison Using the same charger with my nexus 5 my phone would stay connected even at full capacity (I'm sure it has a internal safeguard for overcharging rather than disconnecting continuously)
I'm using one of those aftermarket qi wireless charging stickers.
(edit) I ended up buying a OEM LG battery door with qi built in. I get the same result. It's the phone.
Anyone else experience this or have a solution?
I have not. I bought an unbranded LG back plate and am using an old nexus 4 orb without any issues. I do not get the "battery 100%" notification, but on the lock screen is says battery fully charged every time I check it, all without any sounds during this time.
Now I'm considering just buying a OEM battery door. ****ing Hassel and waste of money to get the removed functionality back in this phone
LG G3 wireless charging full behavior: http://youtu.be/6e6lfrg2n8I
At least your working... Mine is broken i think.. I have 2 unbranded orb. Charging commenced for 2 weeks. Then suddenly it cannot wireless charge anymore. I think my back cover is broken...
robobear said:
At least your working... Mine is broken i think.. I have 2 unbranded orb. Charging commenced for 2 weeks. Then suddenly it cannot wireless charge anymore. I think my back cover is broken...
Click to expand...
Click to collapse
My concern is for the health of my phone's battery.
Just get insomnia. Then your phone won't stay fully charged that much. LoL I get a new phone a lot so I doubt the batttery will be a issue for me.
I have this issue with the factory USB charger, as do many others. I think it's just something they're going to have to patch out of the software.
I called LG support. They gave me the usual run around. Not to be racists but it was a Indian call center. I could tell that they have never even held the phone on their hands before and they were just reading through the typical responses.
One guy said it was similar to bluetooth disconnecting and re-connecting. I told him please transfer me to someone who knows something about phones. Then I got a girl who said pull the battery out and put it back in. This is the best support I could get...
Sounds like Sprint. LoL
Is my problem a isolated issue? I don't get much feedback from G3 owners
What battery app are you using to see that it disconnects and starts charging again when full. Do you charge the phone when you sleep? Can you charge the phone some before you sleep and then when you wake up? I'm thinking it would take a year + before you have any battery issues if any at all. I think it's software related and who knows if and when it gets fixed. If it bothers you that much why even use wireless charging?
sweets55 said:
What battery app are you using to see that it disconnects and starts charging again when full. Do you charge the phone when you sleep? Can you charge the phone some before you sleep and then when you wake up? I'm thinking it would take a year + before you have any battery issues if any at all. I think it's software related and who knows if and when it gets fixed. If it bothers you that much why even use wireless charging?
Click to expand...
Click to collapse
First I use lightflow to show my charging/charged led indication. Second my actual wireless charger has a led charging /not charging indicator.
All abnormal behavior compared to my nexus 5
This happened to me once but it wasn't while the battery was full. I turned off the phone and took the battery out and after it restarted it hasn't happened again since.
I'm suffering a strange problem with my new phone ( D855 on H, unrooted runing stock rom )
I ( like I'm sure a lot of people ) use the LG wireless charger next to my bed to charge my phone over night. I then intern use the phone as an alarm clock with the DayDream app.
So, when I got to bed, I put the phone in silent profile and put it on the charger where after about a minuite ( screen timeout setting ) DayDream starts display the clock.( this is a bit hit an miss but thats a discussion for another day )
My problem happens in the middle of the night ( this morning I noticed it aroungd 4:00am ) where the screen is off and the notification light is quickly flashing green ( the battery is fully charged if thats relevant ) . The phone isn't hot btw and knocking on the screen wakes it and stops the light flashing.
If I remove the phone from the charger and put it back on DayDream refuses to start again. If I manually start DayDream, the clock comes up and runs for a short while before the screen goes off and the grean flashing begins again.
Anyone else experienced this strange problem ?
Thanks
Si
I think the issue is your wireless charger. I believe the problem is DayDream is set to display when charging or docked. Since you are wireless charging, the docked setting doesn't apply. In any case, it appears your charger turns off when the phone is fully charged, thus terminating DayDream. This is actually normal and a lot of chargers behave like this, thus nothing really wrong with your charger. What you may need is a new charger that provides a constant trickle charge. Then DayDream should remain active. If you want to confirm, connect the G3 directly to usb cable charger overnight and retest. I bet you will find that DayDream stays on in this case. I recently purchased and tested Tylt Vu. The Vu does what you would want in this scenario and provide a constant charge even though battery is full. You can see my review here of 2 different chargers (Vu vs. A6). A6 behaves as yours does and Vu provides constant charge.
http://forum.xda-developers.com/tmobile-lg-g3/accessories/tylt-vu-vs-itian-a6-qi-charging-stands-t2862775
cbb77 said:
I think the issue is your wireless charger. I believe the problem is DayDream is set to display when charging or docked. Since you are wireless charging, the docked setting doesn't apply. In any case, it appears your charger turns off when the phone is fully charged, thus terminating DayDream. This is actually normal and a lot of chargers behave like this, thus nothing really wrong with your charger. What you may need is a new charger that provides a constant trickle charge. Then DayDream should remain active. If you want to confirm, connect the G3 directly to usb cable charger overnight and retest. I bet you will find that DayDream stays on in this case. I recently purchased and tested Tylt Vu. The Vu does what you would want in this scenario and provide a constant charge even though battery is full. You can see my review here of 2 different chargers (Vu vs. A6). A6 behaves as yours does and Vu provides constant charge.
http://forum.xda-developers.com/tmobile-lg-g3/accessories/tylt-vu-vs-itian-a6-qi-charging-stands-t2862775
Click to expand...
Click to collapse
Thanks for taking the time to reply
I'll give that a go tonight and see if thats whats causing the problem.
Cheers
Si
A couple days ago it was working fine, however I noticed it gradually charged slower and slower to the point where, even when it's on the charging cradle, it loses charge. Now, whenever I put it on the charging cradle, the screen won't even turn on, and the device will not power up. The light on the bottom of the charger lights up, but the device receives no charge. I'm using the default Moto 360 connector cable, and I've even tried more powerful adapters, but still nothing. I decided to listen to any advice I might could get here before I call Motorola support.
my moto 360 is not turning on . can anyone troubleshoot this issue?
Mine got stuck in a discharge loop, was discharging on the charger, the charger was not recognizing the watch (charger light off).
The direct usb connection powered on the watch but did not charge it. No leaving it on/off the charger worked. It was dead.
The fix was to take it apart and unplug/replug the battery. It started charging normally afterwards. Now it won't stay closed, and the face keeps coming off, I press down on it from time to time and maybe I'll use some superglue
executivul said:
Mine got stuck in a discharge loop, was discharging on the charger, the charger was not recognizing the watch (charger light off).
The direct usb connection powered on the watch but did not charge it. No leaving it on/off the charger worked. It was dead.
The fix was to take it apart and unplug/replug the battery. It started charging normally afterwards. Now it won't stay closed, and the face keeps coming off, I press down on it from time to time and maybe I'll use some superglue
Click to expand...
Click to collapse
Couldn't we talk to Motorola about this? Shouldn't this be considered a manufacturers defect?
I talked to Motorola support, and after hours of phone calls, they said they would replace mine for free. But because the watch was in such high demand, I couldn't get a replacement watch for like 2 months. They seemed shocked that the device had stopped working, and it seems there aren't too many cases of this happening. I'd recommend calling Motorola support before doing anything drastic like taking apart the device.
I don't have warranty, so I can't call for help.
Mine got stuck while trying another Qi charger, so I guess only the charging chip got crazy, the watch worked normally until it drained the battery.
The charger has 2 modes: low power to signal the device it's on the charger then the device (be it phone or watch) should signal back to the charger it's present and the charger goes on the high power output to actually charge the device.
My watch had the charging chip blocked so it didn't signal back to the charger which remained in the low power state and did not provide enough power to charge the watch.
Factory reset and even USB reset did not reset the charging circuitry, only a hard reset by pulling out the battery did the trick.
By the way to take it apart it's not needed to remove the dreadded cracky plastic back, only hold by the strap and rock the case upward/left/right. Tough fingernails and a little help from a plastic wedge near the button and in the opposite side did it.
Hi,
Last week, I updated my Zen watch via the normal way (Access watch application and check for update).
I did a "forget watch" on my phone before I proceed to reset which I believe is a common practice for android devices.
I was using it normally for 2 days but did not charge as weekend, I don't use and left if on without switching it off thus the device shut down when low battery.
Now the problem starts, I cannot power on the device and when I tried to charge the watch, the watch only vibrates only and does nothing.
Can anyone help me?
Thank you!
I Emailed Asus Support but because this watch is imported and there is no local support, I am being throw around and I am pretty lost.
How long have you tried to charge it for?
Hi Willber,
Sorry, right after I posted this it works again.
Apparently, the battery was seriously drained and honest like all the problems faced, I think this 5.1.1 is not well optimized at the moment and now I can understand why Moto 360 delayed the release.
The usual charger (direct with cable)I use does not seems to able to provide sufficient power to it and this goes the same for my USB cable + (I am using a multi ports 2.1Amp charging port).
I changed to thicker cable and it seems able to pick up the power. Not sure why this happened because before I upgrade, I had no problems using the mentioned charger and cable + charger before.
While this is weird, I am happy that the watch is back online for me.
Will monitor a few days and make sure I don't totally drain the battery by mistake again.
Thank You!
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
I also have MWD49B and I'm charging my watch with (AFAIK) a charger which was bundled with Xperia PLAY docking station. Its output is around 500mA. Sometimes I was charging the watch with EP880 charger (output 1,5A) and I was charging it with BlitzWolf charger (output 2,4A). I've never had any problems with overheating and I pretty much never turn off my watch even when charging.
The problem is that some watches (especially the fresh ones from 2014 with glossy grey cap on microUSB port, not the full rubber ones like my watch have) might have faulty battery. If it overheats, charges 4 freaking hours... well it's REALLY long... my 500mA charger charges my watch up to one hour and I have no problems at all...
If you still have warranty, I'd suggest returning the watch, this overheating might be dangerous.
Hi!
Thanks for the answer.
My watch is from an April 2016 batch (written on the box), and it's one of those with the rubber cover on the charging port.
Just to be clear, if I charge the watch when it's ON, I don't have any problem and it is charged in less than one hour, the overheating problem and non-functional charging is present only when the watch is switched off and it is charging.
Me too...
I bought my Sony Smartwatch 3 about one years ago...
Whan I first charge it from PC's USB port , the same problem with you..
I don't know why...even I reset watch , it's the same...
So..I always charge the watch when it's ON...
jackal992 said:
Hi!
Thanks for the answer.
My watch is from an April 2016 batch (written on the box), and it's one of those with the rubber cover on the charging port.
Just to be clear, if I charge the watch when it's ON, I don't have any problem and it is charged in less than one hour, the overheating problem and non-functional charging is present only when the watch is switched off and it is charging.
Click to expand...
Click to collapse
I have the same, "new" batch, with rubber cover on USB port.
I'm not sure if I missed some of your text from the original post or you edited it. I'm talking about switching the watch on so it does not overheat.
I've noticed my watch behaves exactly the same! If it's turned off and charging - it's hot like hell and not even fully charged after two hours and if turned on and charging - cold and fully charged after like... one hour.
Strange because on earlier Android Wear builds everything was ok.
Same over here.
But I didn't try charging it while it is running.
But when it's off, it only charges up to 75% and gets insanely hot. Then, when used it drains normally until around 50%. After that, the battery dies within 1-2h
I also never had any issue with the battery before the last update.
zapp_em said:
Same over here.
it drains normally until around 50%. After that, the battery dies within 1-2h
Click to expand...
Click to collapse
Sign of dead lithium battery
jackal992 said:
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
Click to expand...
Click to collapse
I've had this exact problem. One thing I discovered is the battery will stop charging when it reaches a certain temperature. Try placing a fan to blow directly on it while it's charging. This has worked for me.
Sent from my SM-N920T using Tapatalk
jackal992 said:
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
Click to expand...
Click to collapse
Same problem here.
I've got the SW3 of 2015 vintage (it does have a cover over USB - I thought they all did?)
Since updating, if watch is off while charging it gets very hot, charges very slowly and never to 100%.
The solution is simple enough - charge it while OS is running.
If the watch is out of juice: Start charging, let it get enough to boot and then again allow it to complete charging with Android Wear running. Then charges normally (about an hour) and doesn't get hot.
My feeling is this is a software issue too. I'm running M1D63G.
Since we all know batteries don't appreciate getting cooked, I'm wary of leaving it charging for long when off, I'm betting it will cause battery damage eventually.
Conspiracy theorist's might even suggest it's Sony's way of ensuring our SW3 batteries die, so we're ready to update to the SW4 - I'm not that cynical.
Hello everyone, here's the matter don't know where to ask it so this thread is similar...
I have 2 Sony3 watches, one with screen partially broken and the second I got it secondhand with a charging base made by the previous owner.
The watch that came with the charge base it always has the charge icon on screen even if it's not charging, sometimes if i reboot it dissapears but most of times it STAY :/
if i turn off watch vibrates and start "charging" all alone without connecting it so i don't know what to do with that cause it obv drains battery and its never really off...
Second thing, my old watch with broken screen worked well since i plug it into that base.... then is doing the same as the other watch, charging forever without charger seems like the base charge illness has affected my old watch too... XD
So pleaaase anybody know something about this? i've restarted them several times and with pcCompanion and the icon remains maybe a custom rom will solve or is hardware issue?
I am using may sony smart watch 3 for long time and i kept it for some month after then i carry it and begin to charge it but it will only show sony and then will not proceed i kept it again after i carry it i plug the charger and it only vibrate
This watch needs to be recalled or have an emergency firmware update. My smartwatch 3 overheated while plugged in overnight and melted apart. Thankfully it was on a metal computer case and not some paperwork. This annoyance has become a real safety issue. It's a shame because I loved this watch otherwise.
Just a general FYI to all of you, use a USB Port or a charger that charges slow and always turn it on when you charge it.
Our watch is really different compared to anything nowadays. It shouldn't but still charges faster than it (should) be allowed.
My Watch is still with it's first Battery and it holds for at least a day, just be careful