Develop Bugs

[Guide]-FlashFactoryImage without lost SDcard data

Galaxy Nexus [I9250] easy to flash stock factoryImages without lost SDcard data
Everyone know flash factory images gotta lost sd card data in I9250
So we need backup sdcard,that be nausea
Here is the easy way to keep sd data
1 Go get your image from google factory images
2 Unzip tgz file which one you downloaded
Eg. yakju-jro03c-factory-3174c1e5.tgz ,unzip it and find the image-yakju-jro03c.zip
3 Open image-yakju-jro03c.zip, and delete the userdata.img
[This img using for cover your /data，sdcard mount on /data/media in i9250]
4 Begin flash,your can found flash-all.sh in unzip folder
don't use it
flash BL: fastboot flash bootloader bootloader-maguro-primelc03.img
flash baseband: fastboot flash radio radio-maguro-i9250xxlf1.img
OK point coming: fastboot -w update image-yakju-jro03c.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There is a -w in flash system command . check on fastboot ,-w will **** your /data
So we use fastboot update image-yakju-jro03c.zip to flash system
Cause didnt wipe data ,so flash a CWMrecovery which one wont wipe /data/media
then use CWM to wipe data
Everything done!
Enjoy!

Thank you for this useful post.. :good:
Is this method works with upgrading to 4.2.2? i read some articles about problems in this version with the SDCARD folder permissions and multi-user stuffs? have you tried it befor?
another question.. i had now a soft-break because of an App "Font Installer ★ Root ★" but i made backups using recovery to SDCARD folder, but i can't pull them out as you know without starting up the device in ADB mode.. and i had 4.2.1 (Officially with root access and unlocked boot-loader) is it safe to do your method without any lost of my data in SDCARD folder? or there's another method?
Best Regards.

[RECOVERY + ROOT] 2016 P8000 6.0 (Also known as European B-version) PhilZ v2 and root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be careful: this is for the new 2016 of the P8000, which I believe is only available in Europe. That version is known as "P8000 6.0"
I have been trying to port PhilZ v2 to the new version and although it still has a few bugs/problems, at this point it at least allows you to root your device.
Download (recovery + root):
https://mega.nz/#!kUFBmSDb!RW3sTDPA-imxcNQihCiTfnsXAw_e0Fy-9djliPbxavo
(If you need scatter file, it's attached to this post)
To root:
1. Put Beta-SuperSU.zip on your internal memory
2. Download SuperSU from the Play Store
3. Turn off phone and flash recovery
4. Immediately boot into recovery (don't go into Android first or the recovery will be gone)
5. Choose flash zip from sd card
6. Select the Beta-SuperSU.zip
7. Reboot phone to Android from the menu (if the recovery asks to install root, choose no!)
8. Rooted
The recovery is now probably gone from you phone, because it resets to stock every time you boot into Android. If you like to keep it, rename /system/recovery-from-boot.p to recovery-from-boot.p.bak using ES File Explorer in root mode or something. Then flash the recovery again in SP Flash Tools.
Known bugs for recovery:
- ADB (plugging in cable) crashes recovery
- No access to external SD card, that's why you have to flash root from internal memory
- Touch not working
--
Use at own risk, I'm not responsible for anything.

Fix IMEI on P8000
Thanks to users @FrauHofrat and @ardrift
FrauHofrat said:
With a lot of thanks to user ardrift:
with *#*#6813#*#* entered on the stock dialer you can acess the "IMEI-Tool" which allows you to enter a new IMEI for both SIM cards. The new IMEI stay permanent even after reboot and this also works on 'old' P8000.
first I thought this is a joke but actually it worked - sometimes life can be so easy
Click to expand...
Click to collapse

Emileh said:
Thanks to users @FrauHofrat and @ardrift
Click to expand...
Click to collapse
Dont think it works on blueflame's CM. beliewe he tossed all the MTK stof :crying:

Ported TWRP 3.0.2 from several sources., but touch screen don't work. I've ported for other devices (MT6753,MT6580,MT6582) and never faced this issue. Need help (P8000 6.0)

>STOCK&TWRP Recovery img flashable through TWRP for Galaxy J7 Pro - SM-J730F/G/GM<

>STOCK&TWRP Recovery img flashable through TWRP for Galaxy J7 Pro - SM-J730F/G/GM<
swami saranam!​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DESCRIPTION
Feature to follow the below steps will result in Twrp recovery being replaced by stock recovery
(if your phone is rooted You can then change to twrp by using Twrp apk flasher):good:
Code:
[SIZE="3"][B]DISCLAIMER[/B][/SIZE]
We are not responsible for any issues, problems, or broken phones,may have come from using any data or information you receivefrom this thread.
Using anything here, will most likely violate your
cellphone's warranty or contract.That is also your
100% responsibility
to know, and your responsibilty if you do.
If you don't know what you are doing
or you think you do, and you brick your phone, or something
[COLOR="Green"]POSITIVE[/COLOR] OR [COLOR="Red"]NEGATIVE[/COLOR] changes with your phone,
it is all 100% your responsibility. Use the following data
information, and links at [COLOR="Red"]YOUR OWN RISK![/COLOR]
Don't forget to Hit > Thanks < if this thread helped you!
STOCK RECOVERYand
TWRP3.2.1-1is unofficially out now for J7Pro
This Recoverys in images(.img) so easily flash through TWRP because we can be updated quickly and easily within TWRP
Instructions:
you already have version 3.1..0 or higher installed
Make a Backup!:good:
1) Download the recoverys zip from the link on your device
2) Extract the zip on your device and put it at any location . .It has 2 folders the name has been entered in the folder .So you Pick up the correct one you want.
Eg: stock recovery..
Twrp recovery.. Select any one you want
3) Reboot to TWRP
4) Hit Install and tap the "Images..." button in the lower right
5) Browse to the location of the TWRP image on your device and select it
6) Select recovery from the partition list and swipe to flash:laugh:
7) Boot to recovery
8) Reboot to system:angel:
[UnOfficial] TWRP Recovery by ashyx-
[UnOfficial] STOCK Recovery by BijinbShaji-
DOWNLOAD
https://drive.google.com/file/d/1iowym6QsQfC13hlad405v36_5lDMICWK/view?usp=drivesdk:
Thanks to:
@ashyx
You can find more information and download on https://forum.xda-developers.com/ga...t/twrp-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621:
Contributors
BijinbShaji-
Version Information
Status: Beta
Current Beta Version: 3.2.1.0
Stable Release Date: Soon
Created 2018-04-18

Thanks
Great Job
I using recovery 3.2.1.1

Is it gonna work for J7 Prime anyway?

does this work with Galaxy J7 2017?

[TOOL][VINCE] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the Xiaomi Redmi 5 Plus's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working

Make this tool to enable diag port open without root permissions... My phones imei id is lost

not unlock bootloader my device. is redmi5plus.

[question]
So you are saying that this tool isnt compatible with other phones? Is the Device list updated over the years or what?

Please give us the tutorial and link of downloaded files that needed to flash in this Phone, I'm having a hard time to understand How this thing work

[Guide] Unbricking P20

So I kinda bricked my phone when trying to go back from Beta 9.0 to Latest Official. So I decided to give some kind of guide to try and assist the people Who also got stuck. Beware that I couldnt get ADB to work as it kept complaining about drivers which I couldnt make work but it was due toe phone being bricked. If you can get into ADB and have TWRP already loaded then you can simply transfer the three files from below to your phone and follow this guide with the below three files. It works perfectly : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
If you have the same issue as me then follow the following procedure :
I have the Dual Sim EML-L29C185 (How do I know this?) Well at first I didnt so I had to figure out. So let look at the following :
EML-L29 - Dual Sim Model
C185 - South African Region Model which you can get from the following post : https://forum.xda-developers.com/8-lite/how-to/huawei-regional-codes-t3740473
So now that you know the model number go to this site and type in the model number eg : eml-l29c185 and you will get a list of firmwares for your phone : https://pro-teammt.ru/firmware-database/?firmware_model=eml-l29c185&firmware_page=0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click on the file list and in the example below you will see 4 files but only need three. The EM09 and L29 have the same update.zip and same update_data_full_public.zip but different EML-XXX_hw_meafnaf/update_full_EML-XXX_hw_meafnaf.zip files so get the three files you need for your model.
Now download the Huawei Multitool from here : http://4pda.ru/forum/index.php?showtopic=759172&st=0#entry51396624
and The update.zip extractor from here : https://forum.xda-developers.com/showthread.php?t=2433454
We need to manually flash all the broken image files in the phone with the Multitool but the files we need to flash are inside the update.zip file and thats why need the extractor.
So unzip the update .zip file. Then point the extractor to the folder so you can extract the files needed by the Multitool.
The following Three files need to be flashed
System [Called System.img]
Boot [Called Ramdisk.img]
Recovery [Called Recovery_Ramdisk.img] make sure it is in the folder and rename it correctly. Mine was recovery_ramdis.img without the K so had to rename it otherwise multitool wont flash it]
You can also flash it manually without multitool with the following commands :
fastboot flash ramdisk ramdisk.img
fastboot flash system system.img
fastboot flash recovery_ramdisk recovery_ramdisk.img
Start your phone in Recovery mode : Switch off. Hold vol down and keep holding it and plug usb cable in. Or in TWRP reboot Bootloader.
Start multitool and click on the unbrick tab on top and follow the instructions. That worked for me.
After it was done I transfered the 3 downlaoded files to the phone and followed the procedure to make sure all 3 files are flashed because multitool only uses the update.zip file and i dont think it fixed all the region stuff but this procedure did :
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

One more