Related
Hi,
Would anyone be kind enough to list a step-by-step process on how to overclock the Note 8.0 using SetCPU? I'm a new user of this app and I'm afraid I may end up doing some irreparable damage to the device.
I am also just curious to see if I can squeeze some more gaming juice from the Note 8.0.
thanks in advance.
jnolaw said:
Hi,
Would anyone be kind enough to list a step-by-step process on how to overclock the Note 8.0 using SetCPU? I'm a new user of this app and I'm afraid I may end up doing some irreparable damage to the device.
I am also just curious to see if I can squeeze some more gaming juice from the Note 8.0.
thanks in advance.
Click to expand...
Click to collapse
I was going to post a link to a setCPU guide, but its no longer available
Id only push the CPU a little. In order to gain real gaming perfomance increases you need to push the GPU, but in order to do that you will need a kernel that supports it.
I only received my tablet last night and wont be rooting it until the weekend so cant say what settings ill be using yet. my aim is to attempt to overclock slightly and undervolt where I can...
You're not going to break it with SetCPU. If you overclock too much, the system will become unstable, then just back off. Also, the system will shut itself off well before any temperature possible of causing permanent damage was reached.
SetCPU has an option to create a recovery-flashable zip file, which resets the CPU settings to default. I would absolutely take this precaution, as I've had to resort to it on my old HTC Flyer tablet (became unstable, and bootlooped). As long as you select this option, you're pretty safe.
Other than that, just follow the basic rule of overclocking any computer, and push the clock up one or 2 increments at a time, then test for a few hours to see if the tablet is stable under various usage conditions. Repeat until you've either reached a desirable clock speed, or encounter instabilities.
Also, as you may already be aware, higher than "stock" CPU clock steps are normally not available unless you flash a custom kernel.
The trickster app supports GPU overclock on Civato's kernel.
If you're looking to push the GPU that's the way to go.
Thanks for the valuable inputs to all.
roustabout said:
The trickster app supports GPU overclock on Civato's kernel.
If you're looking to push the GPU that's the way to go.
Click to expand...
Click to collapse
Does the Trickster app allow for senario clock settings. Ie. underclock the CPU on screen off or if battery is bellow a certain percentage?
I may have to switch from setCPU to it if it has the same settings and more...
Aside from seeder which made it slightly smoother, im wondering if anyone has tried tweaking the UI or CPU/GPU to gain performance in our little devices. ik there are a lot of overclocking software on the market and maybe some of you have had results.
Not precisely an overclock but Trickster Mod helps with GPU governor set to performance and Kernel Tuner with all four CPUs set to Interactive.
Also two apps called Digitizer Booster and Performance Booster both help a bit.
I found the files that need alterations,and have the directory in my thread,but they can't remain changed without unlocking the bootloader.
Someone please find a way to get unlocked bootloader access on Fire TV so we can have better everything with the v66 Adreno driver and the KitKat upgrade plus overclocking access to make the GPU go up to 450-500Mhz.
Yes!
Sent from my iPhone using Tapatalk
retroben said:
Not precisely an overclock but Trickster Mod helps with GPU governor set to performance and Kernel Tuner with all four CPUs set to Interactive.
Also two apps called Digitizer Booster and Performance Booster both help a bit.
I found the files that need alterations,and have the directory in my thread,but they can't remain changed without unlocking the bootloader.
Someone please find a way to get unlocked bootloader access on Fire TV so we can have better everything with the v66 Adreno driver and the KitKat upgrade plus overclocking access to make the GPU go up to 450-500Mhz.
Click to expand...
Click to collapse
I wonder if we could put together some init.d scripts and have them executed by SManager at boot in the interim.
WisdomWolf said:
I wonder if we could put together some init.d scripts and have them executed by SManager at boot in the interim.
Click to expand...
Click to collapse
There is a thread for link2sd (i think thats what its called) and it hijacks a script that is automatically run on boot. You could probably put something in there.
Awesome!
Can you guys quantify the benefits? I don't feel the need for OC the GPU or get 4 cores running all time as the box is snappy and fast.
But I'm NOT a gamer...just Netflix+SPMC - both flawless so far.
My only annoyance is the remote...sometimes it takes multiple clicks per button press.
Ipse_Tase said:
Can you guys quantify the benefits? I don't feel the need for OC the GPS of get 4 cores running all time as the box is snappy and fast.
But I'm NOT a gamer...just Netflix+SPMC - both flawless so far.
My only annoyance is the remote...sometimes it takes multiple clicks per button press.
Click to expand...
Click to collapse
you really have not tried the nuc's. remotes on those are hideous.
navigates said:
you really have not tried the nuc's. remotes on those are hideous.
Click to expand...
Click to collapse
Then I'm glad I got the same functionality (and some of the problems) in only 84$
*I no longer have this phone so these values and builds will not be updated if you would like to add new values for this phone or add tweaks to existing builds then feel free to post them on this thread.
*This requires root
I decided to make this thread to share with you guys a tweak that I found that really helped my battery life. I was never able to get more than 3hrs of screen on time on my phone or get decent standby times on lollipop like I did when I was on marshmallow but I may have found a solution. I stumbled on this thread: http://forum.xda-developers.com/nexus-5x/general/guide-advanced-interactive-governor-t3269557 by soniCron give the guy a thanks while you're over there. This guide is for CPU settings to increase battery life and performance. I saw that it was for the Nexus 5x and because the g4 and 5x have the same CPU I decided to give it a shot. I never noticed much performance improvements but I did notice a big battery improvement like I said before. There are many different flavors of tweaks to try and I ended up going with GhostPepper and then tweaking it to my liking.
Here are my settings for the G4 based on GhostPepper
https://docs.google.com/spreadsheets/d/1Yn-qtExspkzINkhtjHBhQyrbtSdMLH9ls4booeqsfh4/edit?usp=sharing
* 8/14/16 If you used the settings from the beta build Turtle or modded GhostPepper check to make sure your settings are up to date. I just changed some target load numbers slightly and fixed an error with the values for above_hispeed_delay. I also fixed an error with a value for the modded GhostPepper settings.
*8/15/16 Slight changes to beta settings to increase smoothness and battery life slightly
*8/17/16 Small change to beta settings to increase smoothness more and changed development status of Turtle to stable beta meaning you can probably use it without worrying about battery drain or slow downs though it does need more testing to move it to daily use
After changing these values with some type of kernel tweaking app I used kernel adiutor, make sure all CPU boosting settings like touch boost or input interval are off or at 0
After applying these settings you should see noticeable improvements in battery life
If you find any better settings add them to the thread.
*I am not responsible if your phone dies, bootloops, bricks, or causes the world to explode.
Unfortunately, this requires root, so no-go on MM.
konradsa said:
Unfortunately, this requires root, so no-go on MM.
Click to expand...
Click to collapse
I meant to put that in the post updating it now.
I found simply changing my governor to interactive greatly increased my battery life. I am going to try this and see what I get. I'll post results.
trxrider31 said:
I found simply changing my governor to interactive greatly increased my battery life. I am going to try this and see what I get. I'll post results.
Click to expand...
Click to collapse
OK great this uses the interactive governor.
New Beta Settings
I have updated the main post with a link to a list of settings one of them is the one that was on there before and the other is one I am working on. The beta I just added seems fairly decent from my testing though this is my first time trying to make my own The small core settings are ones that I did and the Big core settings are slightly tweaked GhostPepper settings. This one seems smooth from my testing maybe not as smooth as the first one I added but it does seem to have a little better battery life when doing light gaming. If your adventurous go for it and report any issues and the battery life you are getting. I also turned all thermal settings off like Core control, VDD, and Temp throttle. It didn't have any affect on my temps if anything they went down a little maybe 1 or 2 degrees but did seem to help smoothness and making sure the governor settings acted right on both profiles.
*I am not responsible if your phone dies, bootloops, bricks, or causes the world to explode.
*If you used the settings from the beta build Turtle or modded GhostPepper check to make sure your settings are up to date. I just changed some target load numbers slightly and fixed an error with the values for above_hispeed_delay. I also fixed an error with a value for the modded GhostPepper settings.
Just wanted to post an update on the battery life I am getting with the beta settings. I managed to get almost 5hrs of screen on time with the Turtle settings beating my previous longest screen on time from the images in the first post. I managed to do this with even more demanding tasks. In the first post the battery times are with mainly web browsing this time I was mainly watching Netflix and YouTube for about 3hrs worth of my screen on time. My brightness was also 10% higher than the first time. I also did a standby test and managed to only drain 3% overnight and it said I would get 139 hrs of standby time which I think is insanely good.
Battery life test
I just ran the Geekbench 3 battery test and managed to get 5 hrs 45 min and a score of 3456 on the beta settings. I managed to beat the G4 battery time by 50min and this was with 30% brightness and Bluetooth, WiFi, and Cell on no airplane mode. I also managed to beat the G3 and almost got the same battery time as the OnePlus One.
*Comparisons where made from the battery times here:https://browser.primatelabs.com/battery-benchmarks
Shorty88jr said:
I just ran the Geekbench 3 battery test and managed to get 5 hrs 45 min and a score of 3456 on the beta settings. I managed to beat the G4 battery time by 50min and this was with 30% brightness and Bluetooth, WiFi, and Cell on no airplane mode. I also managed to beat the G3 and almost got the same battery time as the OnePlus One.
*Comparisons where made from the battery times here:https://browser.primatelabs.com/battery-benchmarks
Click to expand...
Click to collapse
Hi, dude. I'm very interested in tweaking my G4 to get better battery life as at the moment I need to charge it twice a day. I just have a noob question, could you please tell me how you disabled touchboost using Kernel Adiutor?
IvanN8458 said:
Hi, dude. I'm very interested in tweaking my G4 to get better battery life as at the moment I need to charge it twice a day. I just have a noob question, could you please tell me how you disabled touchboost using Kernel Adiutor?
Click to expand...
Click to collapse
Go to the CPU section then scroll all the way down till you get to a section that says CPU Boost. Set the Interval to 0 Sync Threshold disabled and Input Interval to 0. The input boost frequency will never disable for me but with the above settings it shouldn't matter because it will never run anyway.
Shorty88jr said:
Go to the CPU section then scroll all the way down till you get to a section that says CPU Boost. Set the Interval to 0 Sync Threshold disabled and Input Interval to 0. The input boost frequency will never disable for me but with the above settings it shouldn't matter because it will never run anyway.
Click to expand...
Click to collapse
Ok. I really thank you. Just entered the values, I will give it a try and report back on how it goes. Those numbers you got look really good.
IvanN8458 said:
Ok. I really thank you. Just entered the values, I will give it a try and report back on how it goes. Those numbers you got look really good.
Click to expand...
Click to collapse
I would try the GhostPepper settings first. The beta settings seem to give me better battery but they are still a work in progress and not as smooth as the other settings but you can use them if you want any feedback on those settings would be appreciated. I was also surprised how much those settings did for my battery life.
I decided to do a benchmark on how much of a difference there was between stock and the custom settings and to show I wasn't making stuff up by saying that I used these settings and magically got almost double battery life With the stock settings I got just a hair over 3hrs vs almost 6hrs on the tweaked CPU settings. You can see the results from stock in the IMG. The results for the tweaked settings are near the bottom of the first page.
IvanN8458 said:
Ok. I really thank you. Just entered the values, I will give it a try and report back on how it goes. Those numbers you got look really good.
Click to expand...
Click to collapse
How is your battery life after trying the settings out for a few days?
hey man i just tried yours and let we see the performance in next day. anyway the tweak that youve done is only on the CPU? no GPU or whatsoever? what if i implemented from others, let say other G4 users that tweak the GPU and i combined with your CPU tweak. any problem?
Hey man, how could I get the tweak for this setting? Thank you
I didn't think you could tweak the kernel without an unlocked bootloader for the Verizon G4 (vs98613b)?
elrosid said:
hey man i just tried yours and let we see the performance in next day. anyway the tweak that youve done is only on the CPU? no GPU or whatsoever? what if i implemented from others, let say other G4 users that tweak the GPU and i combined with your CPU tweak. any problem?
Click to expand...
Click to collapse
Yes just CPU and yes you can use GPU tweaked combined with the CPU tweaks just be aware it may affect stability.
glees.shin said:
Hey man, how could I get the tweak for this setting? Thank you
Click to expand...
Click to collapse
You need to be rooted then use the app kernel adiutor and change the values in the app.
I use Elementalx custom kernel. All the things in its app confuse me. The only thing I understand is setting min and max CPU rates. I did a lot of searches on what everything else is and what to do with it, and nothing made sense. I need an explanation in layman's terms. Any help would be infinitely appreciated. My device stutters a lot and I don't get very good battery life.
You can take a look at this thread
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
There are a lot of basics and information.
I run EX too and leave the default settings as is. Flar knows more than me that's for sure!
Sent from my Pixel XL using Tapatalk
+1
Just leave the default settings as they are. The kernel devs know what they do.
I would recommend testing all kernels and choose the one that fits for you and your usage.
For me mvk is the best but I know people were mvk is not fitting their usage and they swear on francos or elemental or....
Test them all and find the best for you.
I usually turn off zram as this phone has so much ram it didn't seem to need it. Had no noticable issues or anything.
I thought leaving everything at default is the best thing possible for this phone, at least Flar said to not use any other governor other than default sched anyway. Phone is smooth enough for me to not tweak anything anyway. That was the point for buying this phone at first place, leave Google to do their optimisation and sorts so we can simply start using it and save time.
Use the "L speed" app by paget96 in the playstore.
Thermals, Kernel Managers and their affect on short and long term battery life.
As requested, by fellow LePro 3 owners, I created this thread for a discussion on the benefits of thermal management, using manual thermal settings, and sharing flashable thermals and user settings. To be clear I am not yet an expert on this subject, so I am learning along with everyone else. But, why not share the experience?
Of course we want our phones to last, while also pushing them to their limits, but in a safe and efficient manner. Recently our developers have shared their ideas on thermal management, and they have been gracious enough to allow us access to their own settings, that can be used across multiple builds. See the link below to download the first set of flashable thermal management options.
Recently, some of us have encountered shutdown issues, with some roms having battery stats reporting issues, unexpected shutdowns, and unrelated unrelated lockscreen issues. We users have found that often these troubled builds can be fixed by flashing a fix. Such as the thermals from a previous or other builds that did not have the same issue. Fortunately, it appears that we can use alternate perf and thermal management files that have not only offered a quick fix for some of these current issues, but also offers a longterm solution for using old, new, and future roms builds...collectively. :good:
The plan is to make this discussion much more extensive and simple
So consider this initial post to be an ever changing rough draft.
The end goal is to make it much easier for people to access and share their thermal management files or settings in one easily found central location, and hopefully for everyone to share their suggestions along the way
Helpful to Gamers who want safe power and speed.
Helpful to Non-Gamer's who want simply want stable performance, long battery life
Help everyone by helping us learn to optimize our phones to last for the longterm.
For me, no more repeating the same stuff over and over on various Rom threads, or private messages. No more having trouble digging through threads to find a recommended thermal or setting. So please participate, we can keep the OP updated whenever anything new comes along. Should I get access to something new I will add it to the Megadrive and make a post
Inventory
So far we have the thermals from Lineage, AEX, Balkan, AICP, EUI and in my view one the best is the latest by Jabashque. The idea of this post is to share the thermal settings so that they can be used on whichever ROM you want to try out.
Finally, you do not necessarily need to use these thermals unless you have an issue with general usage, heat or battery life. However, you will immediately notice the benefits.
Edit ( Updated Info)
Regarding kernels: Personally, I use BlackScreen 6.3, it has a long list of governors and I like options.
Currently the best thermal option is the Jabashque edit ( Thermal Fix 7 ) Get it Here: https://forum.xda-developers.com/showpost.php?p=78717015&postcount=18
These thermals work!
Over the past 2 weeks, I have gone back and tried several old ROMs, and these thermal and profiles make those old Roms perform so much better! For example, the September 3rd JMXL version of DotOS.: Yes, Its outstanding with the Sergey thermal. BootLegger's is also much improved, and it was already pretty great as it was. The Miui ROMs, are significantly improved by far! etc.
Of course we have so many great Roms. Occasionally, we get a build that is experimental and it may have unexpected issues. We have seen over the past week that flashing an alternate thermal is a perfect way to save the installation without having to revert to an earlier build. I mentioned old Roms above, they also work on every single Pie Rom.
Here is My Mega Drive Link for all of Thermals that I have collected so far
https://mega.nz/#F!9EokAQTb!Au6cBnJaCJXZrUlaXSLjhg
Alternate Link with key
Link: https://mega.nz/#F!9EokAQTb
Key: Au6cBnJaCJXZrUlaXSLjhg
Jabasque's thermals are in the Jabashque folder. Version 1 and 2 :
Probably shouldn't result in any difference if not gaming.
"Most likely, it would only be noticeable if you're not throttled down to 1440/1900MHz and you're running something that's using 100% cpu" ( Jabashque)
What to use
If you are wanting long battery life and low temperatures use Sergey's thermal or JaBashque version 1
If you want stock EUI faster throttling but slightly higher temps use the ShivateJappedi EUI thermal.
If you want to leave your cores unchanged from the default setting with higher temp throttling, more full power access and yet still safe while use JaBashque 6 Its a rework of the EUI 30s thermals designed to work better on modern Pie Roms : See more information here: https://review.lineageos.org/c/LineageOS/android_device_leeco_zl1/+/238809
Soon, I will create a post in the reserved section below to deeply define the details and differences between these thermals. Because while they all have similarities, they are also very different from one another.
In addition, I plan to add various kernel manager settings for various uses : Gaming, Long Life etc.
Finally, even when moving to another Rom. kernel manager programs such as Ex Kernel Manager will allow you to import and use saved profiles. It seems that it is possible to save the best of each of these thermals by saving the profiles of each. We can share those settings! Then later you can manually choose within your kernel manager which settings you want to use by simply importing choosing a preferred profile.
I hope this clears up the confusion. As mentioned this is a work in progress that was requested by 3 people. This is just the beginning of this discussion that will help everyone understand how to use Kernel Managers and the add-on thermals patches. I need to do some further research to make it all worthwhile . For example, although I love the elementalX governor, I haven't researched it enough to explain why I think it's better. So I plan to find out specifically what it's actually doing vs what other governors do, and how does changing sample rates, and wake locks affect performance and battery life etc.
If there are any experts out there? Please chime in and contribute.
See Updated information from Jabashque, which explains the differences between patch 1 and patch 2
https://forum.xda-developers.com/showpost.php?p=78670166&postcount=2
Installation
Dirty flash the patch that you want to use..thats it.
If you want to try a different patch, dirty flash the Rom, reflash Magisk and dirty flash the patch
You can manually adjust settings by going to /vendor/etc/thermal-engine.conf
Update from JaBashque Edit April 21 2019: ( I use ThermalFix7, its my personal favorite/ it is the best and the safest period.)
@tsongming
Hey, after seeing your thread about thermals, I felt I should write an explanation about how my v1 and v2 differ from stock EUI thermals that you could add to that forum post, since the one you have on there was me describing the difference between v1 and v2, not stock EUI: "JaBashque"
There are two different set of sensors that the original config monitors for the CPU:
the CPU temp sensors (tsens_tz_sensor{4,6,9,11}) and xo_therm_buf. The CPU temp sensors measure the temps of the cores themselves. xo_therm_buf measures what seems to be some sort of overall temperature, though I'm not sure what in particular. However, xo_therm_buf does correlate more directly with how hot your phone feels.
Original:
thermal-engine rapidly throttles your CPU down to 902MHz on the little cores and 825MHz on the big cores when any one of the cores hits 95C, and stops only when the hottest core drops back to 65C. When xo_therm_buf gets to 43C, thermal-engine slowly throttles all your cores to 902MHZ little and 825MHz big until xo_therm_buf drops back to 40C.
Patchset 1:
thermal-engine rapidly throttles your CPU down to 902MHz on the little cores and 825MHz on the big cores when any one of the cores hits 85C, and stops only when the hottest core drops back to 65C. When xo_therm_buf gets to 37C, thermal-engine throttles all your cores to 1440MHZ little and 1900MHz big until xo_therm_buf drops back to 34C. When xo_therm_buf gets to 43C, thermal-engine throttles all your cores to 1132MHZ little and 1363MHz big until xo_therm_buf drops back to 40C. When xo_therm_buf gets to 50C, thermal-engine throttles all your cores to 979MHZ little and 1132MHz big until xo_therm_buf drops back to 43C.
Patchset 2:
thermal-engine throttles your CPU down to 1516MHz on the little cores and 2054MHz on the big cores when any one of the cores hits 95C, and stops only when the hottest core drops back to 65C.
This change was made because I realized that the previous version still had a situation where the CPU performance can tank unpredictably. xo_therm_buf-related CPU throttling is same as Patchset 1.
Thanks to JaBashque for sharing his work! Patch-set 2 is my personal preference. Although the Sergey Perf + Combo is also very good.
@tsongming
Thank you very much for listen us and always give your help.
Rigth now I am on BaikalOS 28th December 2018, if I want to flash any Profile of those, what I should to do (Clean flash? This first, later that etc... and Wich of them I should ti flash for best battery, I do not play on movil)
I am very curious for test this...
I have x722, I do not play. I am now on aex 5.7 oreo. The most depends on the battery, so which zip to flash ? This is a great topic.
kukuteku said:
@tsongming
Thank you very much for listen us and always give your help.
Rigth now I am on BaikalOS 28th December 2018, if I want to flash any Profile of those, what I should to do (Clean flash? This first, later that etc... and Wich of them I should ti flash for best battery, I do not play on movil)
I am very curious for test this...
Click to expand...
Click to collapse
You can dirty flash these thermals.
Personally I like Sergey and Jabashque version 2 the best so far on Pie roms.
The Shivate patch works really well on Marshmallow, Nougat and Oreo.
The Sergey patch works really well on Oreo and Pie, I haven't tried it on Nougat Roms yet.
You can manually adjust settings by going to /vendor/etc/thermal-engine.conf and In this same folder ( vendor/etc) you can also make audio changes, and I am not talking about policies and Tasha.xml files, although you would make changes to those files too, if wanted. This will be something that we can discuss in more detail soon.
gsiwy said:
I have x722, I do not play. I am now on aex 5.7 oreo. The most depends on the battery, so which zip to flash ? This is a great topic.
Click to expand...
Click to collapse
Either the Sergey or the JaBashque 2 with be perfect, depending on what you want.
Use Sergey if your goal is battery saving.
Use JaBashque 2 if you want better gaming performance.
@tsongming thank you for this useful thread. I just have one question. I noticed that sergey's thermal file you uploaded comes also with perf so do you know is it maybe EUI perf and if not is it possible to upload just sergey's thermal without perf? Thanks.
I'm using aex 6.2 and i play a lot of games, but i looking for something that gives the power to run the games and after that (of course after some time without using the cellphone to cooldown) use the phone without worry of him overheat with simple use like 39 or 37 ºC. Do you have something like that?
I have a x722
MnMchill said:
@tsongming thank you for this useful thread. I just have one question. I noticed that sergey's thermal file you uploaded comes also with perf so do you know is it maybe EUI perf and if not is it possible to upload just sergey's thermal without perf? Thanks.
Click to expand...
Click to collapse
Sure, I can extract the perf, I will do that and add it to a separate folder so that there are two options.
Edit: Here is the Sergey thermal only
I removed the perf and added the additional key edit options from the Jabashque patch. So this a combo patch.
Use at your own risk
However, I have tested this and it works fine. I wanted to give the caveat that I am a Noob at this! But its okay. FYI: all I did was remove the perf, so now the perf will come from the rom and I added the Moshe key feature, which some Roms such as AICP includes anyway.
https://mega.nz/#F!ZVpXBQjC!PpXn1ZtLEHJb72Gbw7nWqg
Heitor Lima said:
I'm using aex 6.2 and i play a lot of games, but i looking for something that gives the power to run the games and after that (of course after some time without using the cellphone to cooldown) use the phone without worry of him overheat with simple use like 39 or 37 ºC. Do you have something like that?
I have a x722
Click to expand...
Click to collapse
Use the Jabashque 2
See updated in depth info from JaBashque : here: https://forum.xda-developers.com/showpost.php?p=78670166&postcount=2
So, thank you for your work!!One question,i am at the last AICP Pie,do you believe is better to flash one of these or stay with the settings of AICP?
Thanks in advance!
Don't work
I used to play pubg and the big stay on 1,4 ghz and little on 1,0 ghz
tsongming said:
Sure, I can extract the perf, I will do that and add it to a separate folder so that there are two options.
Edit: Here is the Sergey thermal only
I removed the perf and added the additional key edit options from the Jabashque patch. So this a combo patch.
Use at your own risk
However, I have tested this and it works fine. I wanted to give the caveat that I am a Noob at this! But its okay. FYI: all I did was remove the perf, so now the perf will come from the rom and I added the Moshe key feature, which some Roms such as AICP includes anyway.
https://mega.nz/#F!ZVpXBQjC!PpXn1ZtLEHJb72Gbw7nWqg
Click to expand...
Click to collapse
Works good, thanks.
geo307cc said:
So, thank you for your work!!One question,i am at the last AICP Pie,do you believe is better to flash one of these or stay with the settings of AICP?
Thanks in advance!
Click to expand...
Click to collapse
If you are not having any issues, then don't install any of these.
However, if you want to try it, keep a record of your existing performance, battery life, heat levels for battery and CPU (when idle) and compare that against using these thermals.
If you flash one of these thermals and don't like it. You can quickly return to your previous settings by dirty flashing your rom, or by restoring the system part of a nandroid backup.
Heitor Lima said:
I used to play pubg and the big stay on 1,4 ghz and little on 1,0 ghz
Click to expand...
Click to collapse
So which one of the 5 thermals did you try? Some of them include perf
Understand that you still have to setup your kernel manager. If you are wanting to use it for Gaming use the JaBashque version 2 to and leave the cores on the highest setting.
Yes, it works. It works for me a and a lot of other people on Telegram
If you want low temperatures and long battery life underclock the cores at idle my battery hovers around 85 F and the CPU are around 100-105F
Just so you know you can access your thermal.conf file and edit it manually to increase your thermal limit in /vendor/etc/thermal-engine.conf
Next, save a copy of your existing current setup as a profile, so you can easy switch from one to another with ease and easily compare it to the changes of using an alternative file. You can tweak it to the settings that you are wanting...Just keep safety in mind or you could burn up your CPU.
UpDate!
@jabashque has spent time recently improving his thermals further, and released several new versions .
The latest and greatest is now version 6!
Get it here: https://mega.nz/#!pFoSRaQA!R068WV-YltbQAFzuc3aH72z_OPyrN2uBjgsux2h0dNY
If you like it, please thank him!
Anyone who is using the last build of Jabashque 6 . It has a small error with he tthermal.
Flash this zip file from my Mega drive.
https://mega.nz/#!UZwhAQwY!GDUYQX2Ewcj92jjhs2t-oYnVcUKSbu9WfaOyAJjaKzs
The file adds a GPU setting to the Thermal
Repair by Jabashque: https://mega.nz/#!UZwhAQwY!GDUYQX2Ewcj92jjhs2t-oYnVcUKSbu9WfaOyAJjaKzs
Reference : https://review.lineageos.org/c/LineageOS/android_device_leeco_zl1/+/239612
I want to install Bootleggers os 8.1 on x722 and I have a question: after installing romu and gapps and initial configuration I can flash BS5.1-r3 AND thermal.zip a magisk mantle? will thermal.zip not interfere with BS? Thank you.
gsiwy said:
I want to install Bootleggers os 8.1 on x722 and I have a question: after installing romu and gapps and initial configuration I can flash BS5.1-r3 AND thermal.zip a magisk mantle? will thermal.zip not interfere with BS? Thank you.
Click to expand...
Click to collapse
Sorry I haven't been on XDA much recently, and never received the notification.
If you use Bootleggers, the stock kernel is fine. But blackScreen 6.3 will work fine and it gives you more options. You flash the thermal at anytime. I recommend the Thermal-fix7 which is Jabashque 6 that I edited to fix a typo. No there is no conflict