Hi Guys,
I hope every one is doing well. I have been on the latest Paranoid Android Sapphire Beta 1 build for the last few days. I have been liking the rom so far but I would need to go back to stock OOS for now. Aside from using MSM tool is there another way to flash back stock OOS zips via recovery? I tried sideloading via AOSPA's recovery but it failed (no worries, as I am still able to boot to AOSPA just fine).
Kind regards!
You can try this,,https://www.droidwin.com/unbrick-oneplus-9-pro-fastboot-commands/
Salilsarkar said:
You can try this,,https://www.droidwin.com/unbrick-oneplus-9-pro-fastboot-commands/
Click to expand...
Click to collapse
Many thanks! I was having issues downloading the stock firmware files needed for the MSM tool. I do have the downgrade zip and ota signed zip for my model, but extracting with payload dumper gives me only 7 image files so I think it's incomplete, and I would still need to download the full firmware files to be able to flash via fastboot.
If you try using fastboot to downgrade, you're very likely going to brick and have to use the MSM anyway.
blitzkriegger said:
Hi Guys,
I hope every one is doing well. I have been on the latest Paranoid Android Sapphire Beta 1 build for the last few days. I have been liking the rom so far but I would need to go back to stock OOS for now. Aside from using MSM tool is there another way to flash back stock OOS zips via recovery? I tried sideloading via AOSPA's recovery but it failed (no worries, as I am still able to boot to AOSPA just fine).
Kind regards!
Click to expand...
Click to collapse
I was able to flash to oos11 using twrp. Well, I was on crdroid and there are custom ROMs that require oos12 before It will work. So I went crdroid 8.6 to oos11 to oos 12 and then lineage 19
Well it was a ride for me lol. Took me a few hours to realize I can gain fastboot access via long pressing power button+volume up and volume down altogether. I was then able to reflash the modded magisk boot image to regain access to AOSPA.
The fun part came after trying to flash back to stock via MSM. First I figured out that instead of using the "vol up+vol- button approach then connect usb" way of trying to get MSM tool to connect to the EDL mode of the phone, an easier method is to use "ADB reboot edl" command.
Now as I previously used global stock OOS, I mistakenly used the MSM tool for the global region. However, this got me in a SHA-256 mismatch in the flashing process, causing a flash error which got me back to getting stuck at the bootloader again. Turns out the global MSM tool does not work for LE2120 model.
So at this point I had 2 options - either find a MSM tool that works, or try flashing back to stock via fastboot. The fastboot way would have worked but I ran into a problem - you have to flash to .img files partly via fastboot, then partly via fastbootd. And when on fastbootd my phone is not recognized by the PC (this is why trying to flash back AOSPA also failed, it can't continue the fastbootd part of the install as for some reason my pc loses connection with the phone on fastbootd).
My saving grace was I found out that for LE2120, the EU version of the MSM tool works. So long-story short I got back to stock OOS 12 again. It was a fun yet nerve wracking experience, and I learned a lot.
So the lesson of the story is, for anyone tinkering with this device, to learn the basics, from knowing your correct model number, knowing the proper button combinations to boot to fastboot/edl/recovery, knowing which tools to use, to knowing how to setup/troubleshoot your pc to ensure the phone communicates properly at every step!
Related
Hey everyone, so I saw that there was a new update for MIUI Developer ROM (9.3.28) and I decided to download it. After I downloaded it, i opened twrp and flashed it with lazyflasher as I always do. After the phone boots normally, i realised that the phone had been upgraded to android pie, so I went to check google camera to see if it was working still, but it didnt. So I went back to TWRP to try to enable HAL3 via adb shell, but when i opened TWRP i saw a strange message. It asked for a password in order to decrypt my data. this was the first time i saw it and after searching a bit I tried to use my phones password, but it didnt work. I decided to ignore the message and just open adb shell and enable HAL3. The thing is that when I tried to open it said device not found, which is really strange ( im using the same computer as i was before, adb is installed of course ). I had no choice but to downgrade to stable, so I tried to downgrade to stable rom. Downloaded the rom, but when i chose "choose package" it wouldnt let me install the stable one because it was an older version of android....
So long story short, Android Pie has left me with a non-working Google Camera, TWRP and no ability to downgrade or flash and ROMs.
Any help would be appreciated
https://www.youtube.com/watch?v=bsbZ3kG88Dw
Same problem with me. I tried everything but no luck and now I am unable to use camera2api. So i thought to root my phone and edit build prop manually but when I flashed magisk my phone stuck at boot logo. I lost all my data and I had to flash with mi flash tool. Luckily my bootloader was unlocked.
After flashing Pie, you have to flash a TWRP recover for MIUI Pie. This will allow to decrypt your device (data will be erased).
If you want to rollback to stable (as I did), download fastboot ROM via MIUI official site, boot to bootloader and flash it via flash_all.bat file included in the ROM (assuming you have fastboot on your PC).
hello xda friends!
after a very long time i've got my old xiomi a2 lite display repaired
the phone boots to twrp 3.3.1
beyond that my phone is completely empty
now i would like to give this phone away so i want to return it to stock
but it has been quite a while, i have no idea how to proceed anymore
so far all attempts at following several guides failed with red errors installing the zipped roms
can someone walk me through the process of returning my phone back to stock android
maybe even with some working links (since many of those i found were sadly dead), please?
tHISiSfINE said:
hello xda friends!
after a very long time i've got my old xiomi a2 lite display repaired
the phone boots to twrp 3.3.1
beyond that my phone is completely empty
now i would like to give this phone away so i want to return it to stock
but it has been quite a while, i have no idea how to proceed anymore
so far all attempts at following several guides failed with red errors installing the zipped roms
can someone walk me through the process of returning my phone back to stock android
maybe even with some working links (since many of those i found were sadly dead), please?
Click to expand...
Click to collapse
Download Official ROMs for Xiaomi Mi A2 Lite - Xiaomi Firmware
After the success of Xiaomi’s Mi A1 smartphone, it was very much expected that soon or later we’ll get its updated version. We already have a lot of fastboot and full OTA ROM updates available for download from official MIUI website. For your convenience we’ve collected the full list of the...
xiaomifirmware.com
You can download RECOVERY ROM (this is for flashing the rom via recovery)
or you can get FASTBOOT ROM ( this is for flashing the stuff via fastboot mode)
If you go with Recovery ROM then u will just have to download the zip file (latest preffered) to your laptop/pc. Then plug in your phone to your pc with an usb and transfer the zip file to your mobile device. Then go to INSTALL section and navigate to the directory where you transferred the file to and Flash it.
For installing the rom via fastboot first download one of the FASTBOOT ROM from the link i gave you (latest is preffered). After this extract the zip file on your pc. Go to the extracted folder. Now plug ur phone to the pc with usb and go to the fastboot mode (VOL DOWN + POWER BUTTON to go to fastboot. Or if you are on TWRP just go to the Reboot section and reboot the Bootloader/Fastboot from there) .Double click on the flash_all.bat (if on windows) or flash_all.sh (if on linux) it should flash all the stuff you need into it's place. Make sure u are on Fastboot Mode before running the flash_all file.
sorry, i suck at explaining
thank you.
it worked with fastboot and i am back to stock android!
tHISiSfINE said:
thank you.
it worked with fastboot and i am back to stock android!
Click to expand...
Click to collapse
no problem :good:
i am on PE and been on Linage and then Derp but for 2 weeks now ive tried to go back to factory and for the life of me nothing works ive tried the All N One Tool and MSM Tool and nothing i constantly end up back where i started.
Ive downloaded the latest os firmware from oneplus All N One Tool Downloads the firmware extrasts it the pops up a error saying flash all .bat is missing so dead end there.
could someone lead me in the right direction or explain to me if im doing something wrong.... thanks
[CLOSED] T-Mobile 7T Conversion to International WITHOUT unlocked bootloader/SIM unlock!
Here is a patched MSM download tool for TMobile OP7T. It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the...
forum.xda-developers.com
this will be my last onepluse thatr for sure going back to Pixel 4 XL didnt have no issues going back to stock this is crazy
I'm having the same issue, so I'm gonna piggyback this in hopes of a different direction.. Long story, short, I've spent hours trying to get back to OOS from crdroid 11. the link above got me back to booting up t-mobile and relocks the bootloader, but wifi radio doesnt work & restarting brings me to being stuck on the boot logo. none of the other MSMtools work, unlocked or TMO from the unbrick page.
what step am i missing after going through the tmo to int. guide? since that's the only thing that's working.. thanks in advance, i'm attempting round 2 in the meantime.
When u r stuck on pink TMobile screen, force reboot to bootloader by holding vol+, vol-, & power buttons for 10 sec. Once you see phone rebooting, let go of power button only to enter bootloader mode. Then type "fastboot reboot fastboot" on PC while USBC cable is plugged into phone. This will kick phone into fastbootD mode. Then fastboot flash all stock rom files.
When wifi and 4g not working, u did not enter fastbootD mode, so system did not flash right
SageChrono said:
I'm having the same issue, so I'm gonna piggyback this in hopes of a different direction.. Long story, short, I've spent hours trying to get back to OOS from crdroid 11. the link above got me back to booting up t-mobile and relocks the bootloader, but wifi radio doesnt work & restarting brings me to being stuck on the boot logo. none of the other MSMtools work, unlocked or TMO from the unbrick page.
what step am i missing after going through the tmo to int. guide? since that's the only thing that's working.. thanks in advance, i'm attempting round 2 in the meantime.
Click to expand...
Click to collapse
Above
HueyT said:
Above
Click to expand...
Click to collapse
i was just coming to edit my post. rookie mistake - i forgot to overwrite adb/fastboot tools everytime i moved the OS files to my adb folder lol... somehow i forgot a bunch of times
phone is booting up without that userspace error, so i may be back in good shape!
edit 2.0: all booted up with wifi/camera working again
well gonna try again for the 4th time this time im gonna use a different computer and see if that works..... UUUGGGG
well the 4th time fail to restore back to stock OOS.. its gotta be something im doing bc i even used a different computer. but gonna keep looking around for another route.
msmdownloaderTool says this (Device Not Match Image) the device seems to time out and disconnects from MSMDownloaderTool every time. any advice i have the global version 7T 1905
HueyT said:
[CLOSED] T-Mobile 7T Conversion to International WITHOUT unlocked bootloader/SIM unlock!
Here is a patched MSM download tool for TMobile OP7T. It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the...
forum.xda-developers.com
Click to expand...
Click to collapse
this would not work for me im assuming bc i have the global HD1905 not the T Mobile branded. u can read above why it wouldn't work . but i seem to have made some progress using the All in One Tool i clicked on flash factory image tab and at first it keep error out saying no Flash-All.bat found after unzipping it. so i kelp looking around and finally foud a factory zip that had the Flash-All.bat file in it so tried again using the Allin One Tool clicked Flash Factory image and it unzipped it and flashed fine but now i cant boot to the OOS it just reboots to the " your bootloader is unlocked integrity screen and stays . but i can boot in fastboot mode and recovery which is now factory recovery. i noticed that it flashed the OOS zip on slot A so i think the reason its not booting up to OOS is bc i need it flased on both slots ??
scoot0073 said:
this would not work for me im assuming bc i have the global HD1905 not the T Mobile branded. u can read above why it wouldn't work . but i seem to have made some progress using the All in One Tool i clicked on flash factory image tab and at first it keep error out saying no Flash-All.bat found after unzipping it. so i kelp looking around and finally foud a factory zip that had the Flash-All.bat file in it so tried again using the Allin One Tool clicked Flash Factory image and it unzipped it and flashed fine but now i cant boot to the OOS it just reboots to the " your bootloader is unlocked integrity screen and stays . but i can boot in fastboot mode and recovery which is now factory recovery. i noticed that it flashed the OOS zip on slot A so i think the reason its not booting up to OOS is bc i need it flased on both slots ??
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
using the " All in One Tool "
Flashing is not allowed for Critical Partitions
is this normal error when flashing back to stock OOS ? when the flashing starts it says this for the first 4 or 5 flashing parts then it stats flashing as described in OP. then it reboots out of fastboot and boots to stock recovery then it finishes the flashing . then at the end it says to press any key to continue and the phone reboots and hangs at the screen that lets me know the bootloader is unlock screen. i flashed both a \b partitions and still does the same thing. its like the boot image is not flashing or im missing something else in the OP to get back to stock OOS.
anyone can help me please ?
"Fastboot reboot fastboot" will enter fastbootD mode to allow flashing system parts
HueyT said:
"Fastboot reboot fastboot" will enter fastbootD mode to allow flashing system parts
Click to expand...
Click to collapse
ok that command worked it successfully Flashed all partitions and when it it it finished it said to press any key to continue .... i did and it rebooted into stock recovery and finished the flashing . then it reboots to the Your Bootloader is unlocked warning and stays there . so i went into recovery and factory reset everything and still hangs at the bootloder unlocked warningthat was all on Slot b so i was like maybe i need to flash both Slots so i switched to slot a active and repeated the whole process above and still nothing hangs again at the bootloader is unlocked warning... ggggrrrrr
what gives..... this is all done using the All in One Tool ... i know im getting close to getting it back to Stock OOS as i made progress with your help.
i then downloaded the factory image from OnePlus site but that was a no go as the zip had only something called Payload which wouldn't flash ..
anymore knowledge u might can share and thank you very much for your help
Go back to fastbootD and flash-all parts manually on A slot, then go to bootloader, type "fastboot set_active other" to go into B slot and repeat fastbootD flashing all parts again. Then go into stock recovery to format data and then reboot
HueyT said:
Go back to fastbootD and flash-all parts manually on A slot, then go to bootloader, type "fastboot set_active other" to go into B slot and repeat fastbootD flashing all parts again. Then go into stock recovery to format data and then reboot
Click to expand...
Click to collapse
that did it im back to all stock oos thank you so much buddy couldn't have doe it without your knowledge. crazy that none of the tools didn't work mine must have been a rare odd ball that i had to flash everything manually.
again thank you.
So, I installed TWRP and followed the directions to a T, and now I can't boot into Android, only recovery and the bootloader/fastboot. Tried to restore in TWRP, no dice. Tried the MSM download tool, and it won't talk to my phone. I got my hands on the stock firmware in OFP format (was also able to break it down into its component files), is there any way to flash that onto my phone from my PC/any way to come back from this, or am I pretty much boned?
UPDATE: I fixed it with this tool https://forum.xda-developers.com/t/tool-oppo-realme-flash-ofp-file-on-bootloader.4399189/
EDIT: You'll need to source the OFP firmware file yourself, didn't realize I wasn't supposed to share the link I used
TinkerNerd said:
So, I installed TWRP and followed the directions to a T, and now I can't boot into Android, only recovery and the bootloader/fastboot. Tried to restore in TWRP, no dice. Tried the MSM download tool, and it won't talk to my phone. I got my hands on the stock firmware in OFP format (was also able to break it down into its component files), is there any way to flash that onto my phone from my PC/any way to come back from this, or am I pretty much boned?
UPDATE: I fixed it with this tool https://forum.xda-developers.com/t/tool-oppo-realme-flash-ofp-file-on-bootloader.4399189/
I sourced the firmware here. A scan of the site (and my PC afterwards) didn't turn up any malware, but since it's not XDA, use at your own risk https://androidmtk.com/download-oneplus-stock-rom-for-all-models
Click to expand...
Click to collapse
Do not click that link. Reported
I tried for like 3 hours to find a boot.img and i had root on my phone, but without wifi and sound.
a quick google search showed me that it was because i had a wrong version of the boot.img, afterwards i found another one and now after i have tried installing twrp, booting and flashing using adb (stock and modified versions of boot.img) but it just keeps bootlooping. in twrp i cant wipe, make a backup, see any files in /storage/ and i have no clue what to do next.
What model 7T do you have? HD1907? What was the rom that you were using before you installed TWRP on? OOS12 does not support TWRP. Custom rom A13 does not support TWRP. Only a few custom rom A12 and OOS11 support TWRP.
Idk but I'm just wondering if flashing the last working rom image (dirty flash)? That would eliminate TWRP(?) and eliminate Magisk(?) while hopefully keeping the device from being wiped possibly?
*** Hopefully someone could/would verify this before you attempt... ***
i was on android 11 but i cant remember the version, i have HD1903 (EU ver). i THINK i had the one from the oneplus website(https://service.oneplus.com/us/search/search-detail?id=2096229) but idk anymore
I JUST RANDOMLY TRIED BOOTING MY PHONE AGAIN AND IT WORKED imma check if everything works and will regardless still look at this thread bc it can prob break easily
nah wifi and sound still dont work, but im not in bootloop anymore
MimKA22 said:
I JUST RANDOMLY TRIED BOOTING MY PHONE AGAIN AND IT WORKED imma check if everything works and will regardless still look at this thread bc it can prob break easily
nah wifi and sound still dont work, but im not in bootloop anymore
Click to expand...
Click to collapse
Msmtool back to oos11
can you describe how to use it or send a link to tutorial or smth thx man <3
MimKA22 said:
can you describe how to use it or send a link to tutorial or smth thx man <3
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
i cant find the file for my current version and it doesnt work if i try it with the only version that is android 11
and i cant turn my phone back on
and after i installed the drivers i had to restart my pc and now there is this thing at the bottom right:
testmode
windows 10 pro
...
i waited until my phone had no more battery charge and now im bootlooping again :/
nvm it just booted
im downgrading it now and i dont get the error "smth communication smth" in msmtool anymore
alr it worked my phone is wiped again but i can turn on wifi and sound
but how do i root my phone now? I have an Idea, im gonna write step by step what i think gets me a rooted phone please confirm if that would not break my phone ^^' (bootloader already unlocked)
1. enable usb debugging and allow my pc
2. download and install the latest magisk version from the github
3. download magisk patched boot.img for ver 11.0.5.1BA BUT since i cant find anything on the internet im gonna have to use the zip file from the unbrick tool thing (https://onepluscommunityserver.com/list/Unbrick_Tools/OnePlus_7T/EU_HD65BA/R/) and then patch the boot.img using magisk myself
4. then use platform tools and type following commands: "adb reboot fastboot", "fastboot flash boot {the patched boot image file}"
5. then use magisk to direct install the root thing
i just realisized the unbrick thing that i wanted to use instead of a boot.img doesnt have a boot.img in it... WHERE CAN I FIND A BOOT.IMG brooo androidfilehost.com doesnt have it the unbrick tool doesnt have it
omg i realized i could update my phone to 11.0.9.1 then download the same version from official website and use the dumper to get the boot.img **** meee
wait it sais its 11.0.9.1HD65 AA and not BA **** me
k nvm i just changed the site settings to germany and now its BA
i just went for it and now my phone is rooted thank you very much for your help i would've prob tried to revert back to stock for like 2 weeks and then cry that i cant root my phone thank you so much xd