Develop Bugs

[Q] EVO Unrecognized - WTF??

Guys, I need a little help here. I've rooted my share of phones, and even some tablets, but the Evo i bought a few days ago has been a nightmare.
For some reason, and I can't tell why, this thing will not be recognized by Windows.
It always shows up as "Unknown Device" under the USB catagory on Device Manager.
I've tried different OS versions (Windows 7 64Bit, Vista 64bit, Even Mac). I've also pulled down every form of driver I can think of (SDK Orginal version, HTC Sync, Hboot Versions, etc.)
I just cannot get this thing to be recognized. And if I manually try to update the driver and point it to one that I've downloaded, Windows tells me that the most current driver is already installed.
The bottom line is that I need to be able to connect to the phone from the comp in order to push stuff via ADB and throw commands at it. The same unknown device situation happens when the phone is in bootloader or actually booted into Stock Froyo (2.2)
Has anyone ever seen anything like this? I know i haven't, and it's buggin me out.

buster3845 said:
Guys, I need a little help here. I've rooted my share of phones, and even some tablets, but the Evo i bought a few days ago has been a nightmare.
For some reason, and I can't tell why, this thing will not be recognized by Windows.
It always shows up as "Unknown Device" under the USB catagory on Device Manager.
I've tried different OS versions (Windows 7 64Bit, Vista 64bit, Even Mac). I've also pulled down every form of driver I can think of (SDK Orginal version, HTC Sync, Hboot Versions, etc.)
I just cannot get this thing to be recognized. And if I manually try to update the driver and point it to one that I've downloaded, Windows tells me that the most current driver is already installed.
The bottom line is that I need to be able to connect to the phone from the comp in order to push stuff via ADB and throw commands at it. The same unknown device situation happens when the phone is in bootloader or actually booted into Stock Froyo (2.2)
Has anyone ever seen anything like this? I know i haven't, and it's buggin me out.
Click to expand...
Click to collapse
I've never seen that before. Wish I had something for ya. Is the Evo brand new or used? Are you sure the usb cable is good? I've seen a bad cable cause some headaches before. Wish I had more for ya, sorry man.
Sent from my PC36100 using XDA App

EVO is not new. I bough it from cragslist a few days ago. It seems to work fine otherwise. Not rooted for sure, and running Sprint original 2.2.
I did try a couple of different USB cables just to be sure, and had the same results.
The funny thing is that even though I was never able to get it "recognized" on any of my machines, I was able to get ADB so "see" it for a while. I started the rooting process by pushing files to it via ADB and even sent a reboot command to it.
Once it rebooted, that's when it all went bad. It was still showing as unrecognized (just like before), but now ADB can't see it at all. Keeps telling me no devices are connected.
Even my friend's Mac Air (which supposedly doesn't need any kind of drivers to see the phone) can't see it either.
It's just weird...

perform a hard reset, maybe a rogue app or setting got messed up,
fastboot screen>clear storage>yes

Tried that as well. Sorry i didn't mention it in the original post.
I think I've pretty much tried everything that's somewhat logical at this point.
Now I'm looking for the "illogical" ideas.

Make sure usb debugging option is turned on in settings>applications>development and the phone is in charge only mode. Then it should be recognized and you should be able to use adb.

Debugging was turned on already. I made sure of that.
As for the mode of connection I've tried them all with mixed results.
Here's what I've seen so far...
Charge only - unrecognized device in Device manager, and ADB can't see it.
HTC sync - unrecognized device in Device manager, and ADB can't see it.
Disk Drive - unrecognized device in Device manager, and ADB can't see it.
Internet Sharing - never tried it.
Here's the weird part. If i uncheck Debugging and set the phone to HTC Sync, I am sometimes able to get ADB to see it.
This is just confusing...

What happens if you uninstall HTC Sync and just leave the drivers installed? Could work I suppose. I know unrevoked says to make sure you uninstall HTC Sync and install the ADB drivers.

try this. connect your evo to a machine running xp. i had the same problems rooting one evo using windows 7. connected to a machine running xp ,zipped right through without a hitch.
HOPE THIS HELPS YOU IN YOUR QUEST

Thats what I tried on the Vista box.removed HTC sync, and left the HTC drivers.when that failed I removed the drivers too and replaced them with several different ones I found online.none seemed to work.
The strangest part is that all guides seem to say that MAC OS should just see it without any drivers.
I borrowed friends MAC air and it didn't see it either.

I'm not sure which USB drivers you are using, but these work for me. Uninstall the drivers first, then install this. I hope it is legal to put these here and if not I am extremely sorry.
PS you could try a Linux Live CD and it will see it without drivers or go with Wubi which installs Ubuntu on your Windows hard drive and can be uninstalled just like any other program. It gives you the option to boot into Ubuntu or Windows on bootup. Neat little program and it is faster than using the live CD. Go to this link Wubi and click the Start Download button to download Wubi.

Those seem to be the same drivers I've tried (well those and a ton of others as well).
I'm gonna give that LiveCD idea a shot. Burning it now.
If not, I'm gonna try to find an XP machine somewhere.
I've got a couple of VM's on my machine running XP, but since the main Win7 Machine doesn't see it, it can't seem to pass the USB connection over to the XP VM.
Man, I have to say, this is just the most complicated rooting process I've ever seen. If this was my first root attempt, I'm pretty sure I'd leave Android forever

It usually is a painless operation to root the Evo. For some reason you are having a difficult time with driver installation. It seriously has to be something simple that has been missed, because I have rooted mine and several friends Evo's and it was very easy. I had a MyTouch 3g 3.5mm before this Evo and talk about a pain. Before the Universal Auto root app you had to make a gold card first and that in itself took over an hour. It was my first root and it was very difficult and time consuming, so to see how easy the Evo was no matter which way I do it made me very happy.

buster3845 said:
Thats what I tried on the Vista box.removed HTC sync, and left the HTC drivers.when that failed I removed the drivers too and replaced them with several different ones I found online.none seemed to work.
The strangest part is that all guides seem to say that MAC OS should just see it without any drivers.
I borrowed friends MAC air and it didn't see it either.
Click to expand...
Click to collapse
yes the mac doesn't require additonal drivers to run adb however u need to make sure the directory is properly set in terminal so adb knows where to pull commands from... on windows did u try uninstalling everything phone related? SDK, HTC Sync, the whole nine yards then try reinstalling only the sdk and the usb drivers? I know with the lastest SDK the usb driver is not included for some reason or at least it wasn't with mine... then one day my adb just randomly stopped working and a uninstall/reinstall cleared up everything... try this usb driver and see where it gets u. Don't know if it's any different that wat the guy above posted but worth a shot. Reinstall the appropriate SDK first then i would recommend plugging the evo into the pc with no usb drivers installed then when it cant automatically find the drivers direct it to the file u downloaded and it should pull the necessary drivers from there and see if that does the trick...
View attachment android-usb-driver.zip

No dice so far guys...but i have made progress in identifying the issue (sort of).
So here's the deal - the ONLY way the phone is recognized is if i toggle the "debugging" setting.
If i plug the phone in with the switch set on (meaning USB Debugging enabled) the phone is not recognized. Pointing the unknown device to the drivers (any drivers) does nothing.
However, if i plug the phone in with the switch set off, it finds a usb mass storage device. Then i turn the debugging switch on, and it finds the ADB Android phone with no issues. Then i can push commands via ADB without any problems.
The problem i have is that I cannot toggle that switch if i boot into HBOOT menu. So the comp never see's the phone.
I've tried this experiment on Win7-64bit, Vista-64bit, XP 32bit, and even MAC.
The same situation seems to apply everywhere, and with all of the drivers I've tried. None of them seem to allow the phone to be plugged in and automatically be found. The only way for the comp to see the phone is if i toggle the debugging switch off, then on.
At this point, I'm ready to put out a bounty on this. $20 via PayPal to anyone who can walk me through it. Bottom line is that I need to be able to see the phone without having to toggle the debugging switch. That will allow me to boot into HBOOT and still send commands to the phone via ADB.
Thanks for all the help guys. Hopefully, we can get this resolved.

**BUMP**
Anyone care to take a shot??

[Q] Cannot initiate USB data connection on GS3 (rooted, CM10; Win 7)

A few weeks after rooting and installing CM10 on my GS3, it stopped recognizing any form of USB data connection. It still charges from both computer and wall adapter, but I cannot initiate a data transfer or recognize my device using ADB.
I have tried:
three different OEM Samsung cables (from SG3/SG4 phones)
all the ports on two different Win 7 laptops
all the ports on an Ubuntu desktop
enabling or disabling USB debugging
with different combinations each time. No "USB connection" dialog has shown up on the phone, and no "new device" dialog has shown up on any of the computers. I know that I can get ADB working with a different Android phone (HTC Inspire 4G) so I know that my main laptop has USB ports that work and the cables I've tried work as well, so I'm left to assume that the issue is with the GS3. External visual inspection does not suggest the USB port on the phone is damaged, and the phone is only a year old, so I don't believe that is the cause.
Is there a system setting that I may have modified on the GS3 that would disable all forms of USB communication?
(The end goal is to get at least ADB working so I can try and recover some deleted files from the internal memory; I haven't found a reliable method that does not require ADB so I'm trying to get that to work. I know that transferring files on or off can be accomplished with the external SD card or over Wifi but that is not what I'm looking for)

Any suggestions from anyone?

I am not sure. Could be a software issue. I would try backing up your current cm ROM and try installing a fresh touchwiz ROM to see of that works, to rule out software issues. This could also be a android 4.3 issue. Could try stickmount or a similar otg app from the market.
Sent from my Nexus 7

stelv said:
I am not sure. Could be a software issue. I would try backing up your current cm ROM and try installing a fresh touchwiz ROM to see of that works, to rule out software issues. This could also be a android 4.3 issue. Could try stickmount or a similar otg app from the market.
Sent from my Nexus 7
Click to expand...
Click to collapse
I don't think any OTG app like stickmount will help; I'm not trying to connect devices to my phone. I'm trying to get my computer to recognize my phone (and vice versa) in order to get ADB working.
If I can avoid flashing a RAM I'd like to, because I'm still interested in recovering those deleted files. If that is the only thing that would help, though, then I'll do it. Any other suggestions?

Install Kies and that should get the drivers for the pc in place. Odin should recognize the device when it is in the download mode. If that works, then the pc to phone connection is OK and I'd look to software instead of hardware.
Or, if you boot into your custom recovery, either CWM or TWRP, you should be able to get ADB to recognize the device and issue commands including pulling the files on Internal storage. TWRP also has a file browser built in that might be useful.

I have tried uninstalling any Samsung drivers then using the SGS3 toolkit to install the official drivers, but that didn't change anything on the PC end.
Additionally, I tried finding my device while it was in recovery using ADB and there was no connection indication either.
I currently have CWM installed, but I didn't see a mounting option like I've seen for TWRP. Can I flash TWRP without a computer?

Or try this out: Download mode>Connect via USB>Let Windows download and update all drivers until the notification in the bottom right says it's ready to use>Unplug>Battery Pull>Boot normally>connect again. Voila! It works every time when it's being wonky and its a simple way that doesn't require a bunch of downloads!

installing insecure adb might help

Rebooting into download mode does nothing.
I believe rooting and installing CM10 means I already have insecure adb?

thanks
thanks

what next?
aEx155 said:
Rebooting into download mode does nothing.
I believe rooting and installing CM10 means I already have insecure adb?
Click to expand...
Click to collapse
I have this same issue, in download mode, the device is still not connecting.
what is the next step? I have followed this thread and have the still have the same issues.

[Q] No USB connectivity (trying to update to Lollipop)

So I saw that Samsung had pushed out the Lollipop updates a while back. I thought I'd do an upgrade. I've rooted, which I assume is the reason(or Knox - or both) that I can't do the OTA. So I figure I'll plug in and find out how to push the update...at which point I learn that although I am able to charge fine, my tablet is not connecting to any PCs. I've tried 3 different computers, 2 running Windows 8.1, and one running WIndows 7. No luck. The Windows 7 machine initially said it loaded an unknown USB device, but after I installed the Samsung drivers, it does the same thing as all the others, acts like it doesn't see anything. No device in device manager.
So, I'm not sure how to proceed. I feel like I should get USB functioning before trying to update? I can still boot recovery and try stuff from the SD card as well. Regardless, I'm not sure what I should do first, I'm concerned that USB connectivity appears to be broken.
Thanks!

Does mtp work? Can you see your internal storage and sd card?

You may have disabled mtp in your recovery on accident or on purpose and forgot you did. I would check that first.

acdbrn2000 said:
You may have disabled mtp in your recovery on accident or on purpose and forgot you did. I would check that first.
Click to expand...
Click to collapse
You can't disable mtp in stock recovery and even if you could it wouldn't affect download mode.

Thanks for the ideas. I got it going. Apparently I have 3 MicroUSB cables that are unsuitable for data use. Super annoying!

OnePlus 3 not recognised in fastboot after OOS 9.0.2 Update

Hey, after updating from CB1 to Oxygen OS 9.0.2 i can't access the device (OP3) via fastboot anymore. I have installed all needed drivers and adb is working as it should.
What is strange is, that my device is always shown just as "Android " with a "!" next to it.
Device has been updated via official full update (Downloaded w oxygen downloader - full update)
I have already tried to reinstall the device in the device manager
I have completely reinstalled all ADB/USB drivers
USB debugging is enabled
Has anymone having the same issues? Under CB1, everything was fine...

Have you tried different USB ports? Even other PC's?
I had the same issue, but managed to get it working on another laptop.

bartovitc said:
Have you tried different USB ports? Even other PC's?
I had the same issue, but managed to get it working on another laptop.
Click to expand...
Click to collapse
It was working on a linux based system started from a usb stick in the end, but using the same computer. After long time of research I found out, that it is a problem caused by windows 10, not wanting to install the right drivers. Aparently you only have few options to fix this. But as it works with a usb linux system, I have a "fix" now

NeroTheDawn said:
It was working on a linux based system started from a usb stick in the end, but using the same computer. After long time of research I found out, that it is a problem caused by windows 10, not wanting to install the right drivers. Aparently you only have few options to fix this. But as it works with a usb linux system, I have a "fix" now
Click to expand...
Click to collapse
Sounds like ADB/Fastboot drivers aren't installing properly. You have looked up the right way to install those drivers on Windows 10 haven't you? by disabling driver signing enforcement:
https://ph.answers.acer.com/app/ans...windows-10:-disable-signed-driver-enforcement
ADB/Fastboot works for me and a lot of other people.
It's not a OP3 problem.
Good luck.

It's not a OP3 problem.
Good luck.
Click to expand...
Click to collapse
Check my last reply. I know that its not a OnePlus specific problem, but when I faced this problem the first time, it was right after the Update to pie - which was a coincidence.
Thanks for the advice with the driver signing enforcement, I will try that!

My tablet is stuck as an unrecognised USB device by Windows 10.

Hi there. Sorry if I sound dumb. I'm new to this whole thing and this was supposed to be my first experience with flashing custom ROMs and stuff like that. I was planning to get ready to install LineageOS on my Nexus 7 using a Windows 10 PC. Unfortunately, things quickly went south.
My first roadblock was the tablet not being recognised by fastboot. I checked online for a bit and from what I could gather, the solution was to install the Google USB drivers using device manager. I went into device manager, right clicked my Nexus 7 in "portable devices", selected "update driver" and chose the Google USB driver I downloaded from the official Android developers website. I'm not sure if this is relevant but the tablet was in fastboot mode when I did this. From that point on, my tablet is no longer recognised and it just keeps saying "device descriptor request failed" whether it's in fastboot or normal mode, and regardless of which USB mode I choose.
I tried uninstalling the driver, factory resetting, WugFresh NRT, and using different cables and USB ports. I checked for all sorts of solutions but they either didn't help or they require an unlocked bootloader (which was the very first thing I tried to do before finding out I needed to install the driver for fastboot to recognise the Nexus 7). Does anyone here know of a solution to get this working again? I'm completely stumped on what to do.
EDIT: I tested with a Chromebook and an old Windows 7 PC I had lying around. Neither could detect my Nexus 7 and the W7 PC even said it failed to install the driver as soon as I plugged it in. It seems that the driver update screwed up my tablet somehow and I have no idea how to fix it. I really don't understand how this could have happened considering I followed Google's own instructions for updating the driver.
Does anyone perhaps have a copy of the OEM driver for the 2013 N7 Wi-Fi (flo) model? ASUS don't distribute the driver on their website anymore and I'm out of ideas.

BenSkylake said:
my tablet is no longer recognised and it just keeps saying "device descriptor request failed" whether it's in fastboot or normal mode
Click to expand...
Click to collapse
Review this thread and the solutions.
After you have fixed it, you can easily install a new custom ROM with two steps:
RESTOCK - installs USB drivers and unlocks it, latest official stock ROM
CROSS - various custom ROMs, 1-click installation, TWRP, incl root

k23m said:
Review this thread and the solutions.
After you have fixed it, you can easily install a new custom ROM with two steps:
RESTOCK - installs USB drivers and unlocks it, latest official stock ROM
CROSS - various custom ROMs, 1-click installation, TWRP, incl root
Click to expand...
Click to collapse
Thanks for the response. I don't think I'll have enough time to try this today but I might as well ask. Do any of these fixes work without needing a USB connection to a PC, or if they do, do they require adb and fastboot to work? Because if so, I won't be able to use them since my USB data connectivity is completely busted no matter what I plug my Nexus into.

k23m said:
Review this thread and the solutions.
After you have fixed it, you can easily install a new custom ROM with two steps:
RESTOCK - installs USB drivers and unlocks it, latest official stock ROM
CROSS - various custom ROMs, 1-click installation, TWRP, incl root
Click to expand...
Click to collapse
I just ran the RESTOCK 1 script and it worked wonders! My tablet's USB connectivity has been fixed and as an added bonus, my bootloader is now unlocked. I'll be continuing the process in Linux on my Pixelbook since it doesn't require any driver installations as far as I know. Thank you so much! You're a life saver!