Related
To the MoltenMotherBoard team,
Any chance of a flashable update.zip / patch.zip to go from release 6 to release 7. Just to avoid having to setup a new rom from scratch again?
Thanks.
PS. Good work with this project and your MMB Tweaks :good:
CementLX6 said:
To the MoltenMotherBoard team,
Any chance of a flashable update.zip / patch.zip to go from release 6 to release 7. Just to avoid having to setup a new rom from scratch again?
Thanks.
PS. Good work with this project and your MMB Tweaks :good:
Click to expand...
Click to collapse
Flash it and don't wipe, it'll work fine.
Sent from my.... Actually, who needs to know anyway?
Bug Report - DebianDroid Lenny - Release 7
Hi Guys,
Just thought i'd advise of a few bugs I have found with the latest release. I would post this in the Development thread, but i'm not allowed yet because i'm an XDA noob!
1. System Settings > (Interface) DebianDroid Settings > Interface > Notification Power Widget > Widget Buttons > Brightness Modes >
Force Closes.
This is a new bug, it worked fine in release 6.
Also, if it's possible with this one, can you remove the option for "Auto" as the Gio doesn't have this ability.
2. System Settings > (Interface) DebianDroid Settings > Interface > Notification Power Widget > Widget Button Order >
The re-arranging doesn't work like it's suppose to. You can only drag the rows to the very top. Getting the order you want is still achievable, however you have to do it in reverse and it can be a little confusing and tedious.
This was also a bug in the last version.
3. System Settings > (Wireless & Networks) More... > Tethering & Portable Hotspot > USB Tethering >
Turns on, says it's tethered and then turns itself off again straight away.
Not sure if this worked on the last version or not.
4. System Settings > (System) Performance > Spare Parts >
Force Closes.
This was also a bug in the last version.
5. Duplicate settings menu items.
"Performance" and "Lockscreen" appear under the "DebianDroid" sub-menu as well as the main "System Settings" menu.
"Application" sub-menu appears under the "DebianDroid" sub-menu as well as under the "Apps" sub-menu.
I know you advised that you had cleaned up/removed un-needed menu items in release 7 change log, but I just thought I would point these duplicates out and see what you wanted to do with them.
In regards to your MMB Tweaks 0.9, have you ever thought about integrating them into this ROM. That would be awesome! :highfive:
Great work with this by the way, I have tried/tested heaps of ROM's for the Gio and this is definitely one of the best. Please rethink about finishing up developing on this ROM as it would be a real shame, even if you only do bug fixes mainly as it would be worth it.
Regards, :fingers-crossed:
Translated Link:
http://translate.google.de/translat...dex.php?showtopic=479224&st=120#entry23833639
Original Link:
http://4pda.ru/forum/index.php?showtopic=479224&st=120#entry23833639
- Based on China Unicom version of the official EmotionUI latest upgrade package B115 production, complete ROM production
- Streamlining of the system most of the unwanted programs, such as promotion of operators, telecom customized help and other procedures, reducing the ROM size, reduced memory footprint
- Added full ROOT permissions
- Use SuperSU latest version 1.41 as a super administrative privileges
- Updated Busybox and su binary file
- Streamlined out CUST in music and video, as well as unwanted pictures
- Optimization of the system program zipling further optimize the system memory usage
- Turn on call recording function (call will see more options click the record button)
- Modify Call (millet calls) as well as the alarm tone (Secret Garden)
- Open Theme Manager Online Themes Gallery
- Adjust the boot order of the default desktop icons
- Added new ATX Advanced Settings v0.3, see the following detailed description
- Fix the previous user swipes down notification bar after losing control of the problem (if there are questions, please timely feedback to me)
- To join the list of animation from mokeeos can turn off the ATX advanced settings and effects replacement
- Set up by adding the Quick Start option, Huawei's 5 seconds boot function, the first boot enabled by default
- Join ZTE screen assistant tool, open your own needs
- According to contest requirements, join the ING market, potatoes video client, the brush into the back, in the case of open networking for me a moment to complete the entry support
The new ATX v0.3 Advanced Settings
- Support the on / off status bar shows the percentage of power
- Support on / off GSM network crack (reboot to take effect) - Telecom Edition exclusive
- Support your lock screen is turned on / off mobile data connection
- To support the boot Mute
- Support Huawei and Google lock screen lock screen toggle native
- Support for the user to streamline Google Services Framework, reducing memory footprint (first start Google Framework installed by default)
- Join the engineering mode Quick Entry
- To join the list of super brightly animated, animation effects can define, can also be self-closing
Click to expand...
Click to collapse
Instuctions:
http://translate.google.de/translat...index.php?showtopic=479224&st=0#entry23399079
Anyone tried?
I think it cant work with closed BL and without working fastboot commands?! (the install script inside the package just use fastboot commands to flash)
the language seems to be Russian on that ROM
Ruchira88 said:
the language seems to be Russian on that ROM
Click to expand...
Click to collapse
This custom ROM taked from china forum.
I installed that some time ago ... from the russian board and it worked ... but as it had no informations bar, I went back to B107
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
List of Chinese custom Roms: http://cn.club.vmall.com/forum.php?mod=viewthread&tid=199781&extra=&page=1&mobile=yes
tauio111 said:
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
Click to expand...
Click to collapse
Have you actually tried the ROM itself ? Just curious, it seems interesting and I may give it a try.
Otherwise sorry but can not help with the apk.
LL13-
No, I have not tried this ROM, since I've had this phone for 2 weeks only. I usually wait a few months before flashing a custom rom. ATX advanced settings are what I'm only curious about in that rom, because it has an ability to disable the huawei lockscreen and use the AOSP one instead.
A-CM13
Information and thanks:
A-CM13
A-CM13: 3.9.(8)
Last Update: 26.05.2016
Anroid: 6.0.1
based on: Last Cyanogenmod from Sooti theard
Created for speed
v3 changelog:Now:
last cm13
Not support 7z file
Lighter media service
Lighter system apps
Less apps for memory
213mb (v2.1)>202mb(v3.0)
Bigmem in device settings (from sooti)
And more more, but I do not remember
What is new?
FASTER
FASTER
FASTER
AND
FASTER
Change-log A-OPTIMALIZATION:
- Add app for OC and bigmem (DevilTool)
- Remove any unnecessary permissions
- VM optimization
- Change mms apk
- Slimmed 213 mb
- Disable Security
- Better Apk Music
- Less fonts file
- Add tweaks for battery life and performance
- Add Script "Seeder"
- Disable autologin Browser
- Optimalize bulid.prop
- better stock clock
- delete apps
- Change DPI (210)
- remove auto update omni
- Less RAM usage
- Disable logcat
- 16bit transp.
- Disable Logers
- Enabled purgeable
- Optimization start system
- Disable JIT
- improved stability
- Add Killed media server
-Fix sources settings
-Optimization system/bin
-Disable Android Device Check In.
- Disable Extended JNI Checks
- better gallery
- Smooth Keyboard
- Optimization ART (faster application loading)
- Corrected Dalvik
- Fix lags, when watch video
- improved sqlite
- improved OOM_ADJ Settings
- improved net buffer
- Disable debugging notify icon on statusbar (Offloads CPU)
- Performance boost in deodexed (Stop verify bytecode in system & data apps)
- Scroll (should will better)
- Watch Video should will better too (Add bulid.prop code video.accelerate.hw=1)
- Fast reboot
- Optimaliz dithering,fast dormancy
- Change Heapsize for APP-48mb for 512mb ram
- remove unnecessary in etc/bin/usr
- lighter camera like LP
- Cache size set 0
- off use awesome player
- Off google location and google network location
- fstrim script
- cpu tuner
- Swap dex2oat
- set hidden apps limit 14
- set max strarting apps 6
- Update bussybox
- delete unsupported functions, eg. Speedlight
DOWNLOAD
A-CM13 v3:
A-CM13 v3 REDUCTION
A-CM13 v3 REDUCTION - MIRROR
A-GAPPS for M(Last v6.0):
A-GAPPS 6.0.1
(Remember that you do not need to use gapps! Without gapps your phone will 200% faster)
________________________________________________________________________________
________________________________________________________________________________
Questions / Help
ROOT;
-About phone, and 7 click on "Bulid number"
-Now go to settings>Developer options
- Change root for App
How to faster:
More ram:
GO DevilTools>Memory managment>Change ram settings(maximum) and Change Zram settings(30%)
Overclock:
GO DevilTools>CPU>Set Cpu Freq LIMITS>Change max for 1400
Background process limit:
-About phone, and 7 click on "Bulid number"
-Now go to settings>Developer options
- Background process limit
- Change "At most, 3 processes"
Browser faster:
Go to Browser>Settings>Advanced (here disable JavaScript)
Turn OFF Autoupdate APPS:
Go to Google Play>Settgings
THANKS FOR USE ! A-TEAM
XDA:DevDB Information
A-CM 13 galaxysmtd, ROM for the Samsung Galaxy S I9000
Contributors
dracov76
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-05-26
Created 2016-04-12
Last Updated 2016-05-26
the language arabic appear liks squares form
nice work
Mobile Data isnt working for 100% all time or just buggy?
Hope that mobile data will be fixed. It seems a great work.
I have a questoon Dracov: you suggest to not install gapps, in this case there is a good replacement to sync phone contacts?
data format in ??
f2sf ?
yobooh said:
/.../ I have a questoon Dracov: you suggest to not install gapps, in this case there is a good replacement to sync phone contacts?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=org.dmfs.carddav.sync
and
DAVdroid on F-Droid (owncloud, etc).
The new version, better than ever, soon!
Hi dracov76,
Cool job
Where is the last Gapps ???
phil_greg2001 said:
Hi dracov76,
Cool job
Where is the last Gapps ???
Click to expand...
Click to collapse
Soon
is this stable enough for use as a daily driver?? does data work in this new build?? thanks a lot for your effort (Y)
having problem with titanium backup root access!! help plzz.
Hi, download link not working... any backup?
"Bigmem in device settings (from sooti)"
Actually this feature is from myself. See this post : http://forum.xda-developers.com/showpost.php?p=66325020&postcount=26
... well what i mean is that the code is signed by myself : https://github.com/lollipopi9000/an...mmit/85d01d15cf3e618e407ba746963d6d3f4677e1d3
Anyway, just do whatever you want.
Yes, I know but, I not Add this, just I take it from Sooti CM13
Can you fix the problem with audiofx and I can t swap normal ? Also when I switched on the wi fi sometime my phone reboot continuity can you fix them?
bootloop in recovery
Hi, I believe I made a mistake wiping data before installing and now say it is installed but cannot mount data and system, here photos, someone has idea how to repair without Odin and restart from gingerbread, which mistake I did?
Coming from Full advance, became very laggy after a couple of days.
Thanks
my device get auto reboot many time with in a day ... now i tried to flash other rom and only get updater error 7 ??? what is wrong ???
@satism
For the auto reboot I believe is a lack of memory/resources, just slim down applications and/or reduce processor speed. For error 7 you may try to keep wiping and installing the same file or simply installing for 3 or 4 times, usually I am lucky.
Or installing a different recovery.
id example said:
Hi, I believe I made a mistake wiping data before installing and now say it is installed but cannot mount data and system, here photos, someone has idea how to repair without Odin and restart from gingerbread, which mistake I did?
Coming from Full advance, became very laggy after a couple of days.
Thanks
Click to expand...
Click to collapse
try reboot into recovery 2 twice (rebot after reboot)
and format /data for f2fs
and reboot
(without connect usb!)
GUIDE: FIX S7 LAG FROM ROOT! Works on ALL S7 Variants (& Almost ALL Android Phones)
Hey All,
I've found a GREAT PROGRAM that'll fix ALL your lag issues after rooting the S7, called Gov-Tuner.
I've tested by ODIN-ing back to stock (PE1 firmware) and my results were INCREDIBLE, though you do not have to (YMMV)!!
I'm also including Install instructions for Viper4Android Sony Beats 4.8 Universal Edition, SELinux Mode Changer, and what apps to freeze with BootManager - An XPOSED Module - below as these will also help speed up the phone AND provide even more compatibility to install most apps! (for example, SELinux MUST be set to permissive for V4A if you want to install any version OTHER THAN V4A Sony Beats 4.8 Universal Edition).
UPDATE: I just tested a "Ram Expander" type program and I had VERY different results each time I tried. However, my overall result was that it DID help - though there are costs. Read More Below!
I TAKE NO CREDIT for GovTuner, SELINUXChanger, V4A (And all variants) are NOT my programs! Please support the developer(s) of these incredible mods if it works for you! They have spent a LOT of time and effort to make something amazing & should be supported if you use them!
Now on to the instructions...
DISCLAIMER:
You take FULL responsibility for installing this mod. IF it brick's your phone, causes nuclear disaster, or blows up the planet, do not blame me... Well, if you do blow up the planet and I'm not one of the survivors, then you can blame me - otherwise, it's YOUR fault!!
(Now that I've covered myself, on to the instructions)
Install on a new, clean, and/or reset phone -
1)Reset phone completely to stock (no root) to PE1 or PF2 firmware (PE1 worked best for me for some reason)
2) Root Phone (g930v) - Follow guide from here: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
3) Flash v15 FIX universal from OP located here: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
I had trouble with the v15 Universal Fix on PF2 firmware, but Others have reported it works. So it's up to you...
4) Flash XPosed firmware IF you want to run XPOSED (You can use Wanam's framework v86.0 or Topjo's v86.2 - It's been mentioned that topojo's framework is smoother, but I've NEVER used it. Please report back and let use know. (let phone reboot) -
Install XPOSED APK at any time
5) Flash Gov-Tuner (v2.6 Latest Version as of writing this) (reboot phone)
Download From here: http://forum.xda-developers.com/devdb/project/?id=16012#downloads
GovTuner's Project Thread: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
6) Install Universal INIT.D and set the toggle to "ON" (From playstore) - Or flash a mod to give INIT.D support without needing an app
7) Install L-SPEED (Playstore) and either use my settings to make your phone INSANELY BLAZING FAST (available below) OR the settings suggested from this site after the LSPEED button -
http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804
8) Install Terminal app (From Playstore)
9) Install an app to change your governor (ir. Kernel Auditor, Rom Toolbox, etc... from Play store)
10) Use app to select the Governor you want to use - (ie. interactive, ondemand, etc) - I prefer INTERACTIVE & suggest you select it - (if it's not already selected & running)
11) Open your preferred terminal app (from phone) to run GOVTUNER
(instructions with commands below - also available on Gov-Tuners Project Thread)
http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
11a) in terminal, type "su" (without quotes and hit enter)
11b) in terminal, type "govtuner" (without quotes and hit enter) - Program will make sure you meet all requirements
11c) You should see a menu with 3 profiles available - Battery, Balanced, and Performance. (1, 2, & 3 respectively)
11d) Select the number the corresponds to the profile you want and then hit enter. After it configures you should see up at the top left the profile you selected running in some kind of color - (For instance, Performance is written in blue)
Gov-Tuner Project Thread here: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
12) PROFIT!!! Change & Test different governors AND profiles to get your phone to whatever you prefer.
Whenever you want to change profile, use the govtuner command.
Whenever you change your governor (through romtoolbox, kernel auditor) and you still want to use the same profile you last selected, then you only need to run the "tune" command.
*** Scroll Down to view a list of apps you should freeze ***
Install Gov-Tuner without Resetting Phone
(MUST HAVE ROOT)
1) Download GovTuner from here: http://forum.xda-developers.com/devdb/project/?id=16012#downloads
2) Install Universal INIT.D (Playstore) - Open app and set toggle to "ON"
3) Install Terminal (Playstore)
4) Install L-SPEED (Playstore) - Use my L-SPEED BLAZING FAST settings offered below (at reduced run time) OR the suggested settings from this thread - http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804 where you'll get a slight performance increase with more run time. (Reboot phone)
4) install an app that'll change your governor (ie. Kernel Auditor, Rom Toolbox, etc.) (Playstore) - Only if you want to change governor
5) Flash Govtuner (v2.6 is latest version at time of writing) with Flashfire's - use OTA flashing option
6) Change governor ONLY IF YOU WANT - (interactive, ondemand, etc) -
I suggest selecting "INTERACTIVE" governor if it's not already running.
7) Open terminal app from phone and run GOVTUNER with the following commands (link to GovTuner Thread above)
7a) in terminal, type "su" (without quotes and hit enter)
7b) in terminal, type "govtuner" (without quotes and hit enter)
7c) You should see a menu with 3 profiles available - Battery, Balanced, and Performance. (1, 2, & 3 respectively)
7d) Select the number the coorosponds to the profile you want (1-Battery, 2-Balanced, 3-Performance) and then hit enter. After it configures you should see up at the top of terminal windows the profile you selected - in some kind of color - (For instance, Performance is written in blue)
8) PROFIT! You may want to test each profile with the different governor(s) until you get EXACTLY what you want. (Long battery life, More performance, etc)
*** Scroll Down for a list of apps to freeze ***
My L-SPEED Settings for an
INSANE PERFORMANCE BOOST!
My Governor is set to "INTERACTIVE" (used Kernel auditor) & the GOVTUNER profile is set to "PERFORMANCE"! (used govtuner within terminal app).These settings will give you an INSANE performance boost, and my runtime is usually 18 hours.
L-SPEED Settings:
Main tweaks Option (From MAIN MENU options)
You can "KILL MEDIA SERVER" manually from within lspeed - It will automatically run on startup.
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
Flag Tuner - Enabled (I recall a much better flag tuner mod that could be flashed. If its still available, you should use/flash it & disable this setting. The developer of LSPEED was the one who said this & suggested it to us when LSPEED was a flashed mod.
Assertive Display - Enabled
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Create a backup of these settings from within LSPEED just in case - you never know when you'll need to restore the settings.
Make SURE you create a backup of the setting you've just set, AND be certain that LSPEED can launch upon startup / bootup! (VERY IMPORTANT!)
SELinux Mode Changer v3.2
(Change From Enforcing To permissive)
1) Download SELinuxModeChanger from here - http://forum.xda-developers.com/devdb/project/dl/?id=12506
2) Install App
3) Run App and select permissive
4) Enjoy
As a side note, Viper4Android requires SELinux to be set to permissive (EXCEPT Viper4Android Sony Beats v4.8 Universal Edition located here with install instructions)! Can anyone confirm that V4A's latest version worked on the S7 with SELinux set to permissive? I will be testing later on, but please let us all know if possible! Thanks!
ROEHSOFT RAM Expander
(Additional SWAP File) To Speed Up S7
Here are the install instructions -
1) Download ROEHSOFT Ram Expander from the Play Store: https://play.google.com/store/apps/details?id=com.swapit.expander.de&hl=en (There is a FREE & PAID version - get paid version IF it works for you!)
2) You will now need to create, on your MICROSD card (External Storage) a 4GB partition - Please be warned, when you create a partition you can lose ALL your data. I would suggest MiniTool Partition. I'd make the first partition your storage partition (where you store pictures taken, music, etc), and the second partition as the the SWAP partition. Again, ONLY MAKE THE SWAP PARTITION 4GB! You can format the swap partition as a SWAP file system OR in ext4. Either way, it's your call. I found the SWAP file system to be a little better, but you'll need to try them out and see what works best for you.
3) Put microSD back in phone and launch ROEHSOFT's Ram Expander. Give SU permission. Click the menu at the top right and select swap location.
4) Run the app - At the bottom select the "Optimal Values".
5) It will ask you want profile you want (similar to GOVTUNER, but they have NOTHING to do with each other!). You can select Balanced, Gamers, Multitaking, etc...
6) It will ask you to select the directory to use as the swap location - MAKE SURE YOU SELECT THE CORRECT LOCATION BECAUSE it will DELETE ALL INFO ON THAT PARTITION SELECTED! BE EXTRA SURE as I'm not responsible if you select the wrong partition and lose EVERYTHING!
7) Let it do it's thing and enjoy! You'll only need to change the swappiness and possibly the cache.
7b) DO NOT SELECT PERFECT KERNEL unless you KNOW it will work!
7c) DO NOT SET TO AUTORUN until you know it works and does not cause boot loops, probs, etc..
8) ENJOY!
This really did speed up my phone (G930V - S7), and I was amazed because I didn't believe it would, HOWEVER, there is a cost. This CAN heat up your phone since it's writing to the microSD card. If you're playing games and using it a lot, your phone will heat up and the battery will be drained at an insane rate! But, the speed increase was impressive. Like everything else, it's a trade off...
Please post and let me / us know how this works for you!
Suggested Apps To Freeze with
BOOT MANAGER (Xposed App) and/or TitaniumBackup
Here are the apps that CAN be FROZEN with your favorite app (Titanium Backup, App Disabler, etc)
1)Game Launcher (ONLY If you want)
2)EMERGENCY Launcher (ONLY THE EMERGENCY LAUNCHER - do NOT confuse with ANY of the other launchers. Double check to make sure you are freezing the correct one, otherwise you will be in a WORLD of trouble!! - Located in system/app/emergencylauncher/emergencylauncher.apk)
3)SamsungDLPService (system/spp/SamsungDLPService/SamsungDLPService.APK)
4)Security Policy updates (system/priv-app/SPDClient/SPDClient.apk) - Freezing this SHOULD help those who haven't had success running XPOSED due to constant reboots.
5)SecurityLogAgent (system/app/SecurityLogAgent/SecutiryLogAgent.apk)
6)System Updates (system/app/SDM/SDM.APK)
7)Verizon Store Demo Mode (system/priv-app/com.customermobile.preload.vzw/com.customermobile.preload.vzw.apk)
----------------------------------------
Apps To Disable Through BOOTMANAGER
(FREE XPOSED App through the download section of XPOSED APP)
You can disable ALMOST EVERY APP that is running, however... DO NOT disable ANY SYSTEM apps unless you know what you're doing.
The ONLY APPS I can suggest you DO NOT "STOP" are the following:
1) Universal INIT.D
2) L-SPEED
3) Kernel Modification Programs (if Any) - Kernel Auditor, Rom ToolBox, etc...
4) IF by some chance you have an issue after disabling an app, just launch BOOTMANAGER and re-enable the app!
5) You can also "FASTBOOT" through bootmanager where it will disable EVERY SINGLE USER APP you have. Use this if your having a problem with bootup, an app, etc... It's great for diagnostic purposes OR to really speed up your phone if/when needed!
ViperATMOS Sony Beats v4.8 Universal Edition OR
ViperAtmos Sony Beats 5.5 Edition Installation Instructions for phones with
SELinux PERMISSIVE or ENFORCING!
BOTH versions DOES work with the Galaxy S7 Verizon Variant (G930V)!
This version of V4A (Viper4ATMOS Sony Beats v4.8 Universal Edition) runs with SELINUX set to enforcing or permissive unlike other versions! (Thanks to @srish2 for the info)!
1) Download the flashable zip (Direct Download Link: http://forum.xda-developers.com/attachment.php?attachmentid=3701983&d=1459364213)
2) Open flashfire and select OTA flash option
3) Select the downloaded zip file to flash from within flashfire
4) FLASH (let phone reboot)
5) Look in your app drawer and you SHOULD see a DOLBY APP & the Viper4Atmos or Viper4Android app.
Set your audio to whatever you prefer from within those apps. (You may want to go to the project's thread to see what is suggested) Here is the Link To Viper4Android, DOLBY, Viper4ATMOS, & Viper4DD's Project Thread - http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
5a)PLEASE NOTE - RUNNING THIS AUDIO TWEAK can (and most likely will) INCREASE your audio quality, BUT it will drain your battery slightly!
6) ENJOY Viper4Android, Viper4ATMOS, Viper4DD+, etc
You should be able to install other V4A variations versions as long as you have SELinux changed to whatever is required per the app's directions in the OP. V4A's Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12506
A Few More things...
You SHOULD get an app like bootmanager (xposed module) so you can select certain app's from loading at startup.
Hope this helps,
Swick
This resolves lag -- what about the obscene battery drain?
w0rdie said:
This resolves lag -- what about the obscene battery drain?
Click to expand...
Click to collapse
it fixed the INSANE battery drain AND insane LAG. Bottom line, it fixes both, FOR ME! (And the other 16 phones I have installed it on for my employees!) - Full disclosure, I did install it on a 17th phone, but that phone turned out to have a physical defect, so I dont really count that one, heh!
With govtuner, I can go for at least 18 hours in performance mode profile and over a DAY in battery mode profile. (You'd select the profile that you want through GovTuner in a Terminal app on phone).
But it saved my arse, big time. BEFORE govtuner, I would only get 6-8 hours battery time if LUCKY.
Now, I get a HECK of a lot more!
I've got an S7E and S7 -- I rooted and 'tuned' the E but couldn't live with the battery drain, overheating and lag (in order of severity) so I've opted to leave my S7 unmodified but welcome a viable root solution.
Going to give your steps a try on the Edge.
Also...
L-SPEED will help in MANY WAYS to either increase or decrease your battery usage, depending on the settings you use. That will CERTAINLY help a lot to decrease battery drain, too!
w0rdie said:
I've got an S7E and S7 -- I rooted and 'tuned' the E but couldn't live with the battery drain, overheating and lag (in order of severity) so I've opted to leave my S7 unmodified but welcome a viable root solution.
Going to give your steps a try on the Edge.
Click to expand...
Click to collapse
Thanks, that means a lot to me. I appreciate it! Let me know how it works.
FYI, I have mine set to performance mode and changed some of the settings in LSPEED to be even more performance enhancing than was suggested in the post / guide (link provided in that step to the settings suggested. Just scroll down to the LSPEED title). So my phone CAN run VERY hot. however, I've changed my phone to battery profile (within govtuner) and changed LSPEED settings to more battery conservation - taking a slight hit to performance - it ran cool and smooth and I did NOT notice ANY lag. Plus, my phones have close to 600 apps.
Oh, also... I would seriously suggest getting a program that'll allow you to stop certain apps from loading at start up. Forgot to add that to the directions. That's certainly helped as well!
Early read: performance seems on par with stock -- battery life isn't as solid as unmodified, but does appear to be much improved
w0rdie said:
Early read: performance seems on par with stock -- battery life isn't as solid as unmodified, but does appear to be much improved
Click to expand...
Click to collapse
Thanks for the early read - Glad the mod worked. Those developers for govtuner are amazing!
Appreciate it!
Don't forget, try other governors and then pick a profile that u wanna use. I've found interactive in battery profile to give good batt life & that same governor in performance profile to be very fast - alongside L-SPEED, of course!
Have stayed farr away from root, for lag and battery issues. Will give this a try though, thanks for putting this together!
swick1981 said:
Thanks for the early read - Glad the mod worked. Those developers for govtuner are amazing!
Appreciate it!
Don't forget, try other governors and then pick a profile that u wanna use. I've found interactive in battery profile to give good batt life & that same governor in performance profile to be very fast - alongside L-SPEED, of course!
Click to expand...
Click to collapse
Thanks for the guide sir. Heat is gone using interactive and balanced and lag is noticeably reduced. Great find. Out of curiosity, do govtuner tweaks set on reboot, or do I have to rerun and reset profile after I reboot the phone? Also would love to see what settings you use for most balanced performance under kernel auditor and govtuner.
Update: upon further review, this really really does work. For those of you who have held off rooting because of engboot lag/heat issues, rest assured this does a good enough job that it mitigates any problems I was having. I had followed all steps before trying this (flashing fixes v15, l speed, greenify, doze, amplify) but this is what did the trick. Thank you OP again
ororick said:
Thanks for the guide sir. Heat is gone using interactive and balanced and lag is noticeably reduced. Great find. Out of curiosity, do govtuner tweaks set on reboot, or do I have to rerun and reset profile after I reboot the phone? Also would love to see what settings you use for most balanced performance under kernel auditor and govtuner.
Click to expand...
Click to collapse
Govtuner SHOULD run at boot. You should only rerun the tune (or govtuner) command IF you've changed the governor OR soemthing within the kernel!
My Governor is set to "INTERACTIVE" & my GOVTUNER profile is set to "PERFORMANCE".
Here are my LSPEED settings
(Please understand that I sacrifice battery run time for performance and allows my phone to run for a little under a day!)
within the Main tweaks Option (From MAIN MENU options)
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
Flag Tuner - ENABLED (DEFINATLY ENABLE THIS!) - there is a better flag tuner available as a flashed tweak somewhere on XDA, but I can't remember where. However, the tweak is VERY GOOD within LSPEED. I'll update OP if I find the better one!
Assertive Display - ENABLED
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Once finished, PLEASE SAVE THESE CHANGES to you can load them and not go through all this again. Furthermore, make sure you do not disable LSPEED from running at start up! (Several people have had that problem and not realized it)!
I HOPE you're phone goes so fast it flies into the future to tell you the world is going to end! heh
Enjoy!
Swick
Govtuner did help out I used to use it when I was rooted but I still had stability issues battery did improve but still drained to fast for me. I'm back on stock
Sent from my SM-G930V using XDA-Developers mobile app
ickedmel said:
Govtuner did help out I used to use it when I was rooted but I still had stability issues battery did improve but still drained to fast for me. I'm back on stock
Sent from my SM-G930V using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm sorry to hear that! Plus, that's extremely odd - did you test other governor's on all the govtuners profiles? Did you flash the v15 fix on the PF2 firmware (if you did that, it WILL cause stability issues - I can attest to that, sadly)!
I've setup on 16 S7's and they all work like a charm - no joke! I've NEVER had a phone this fast in my life, frankly!
Further, I do suggest starting from a clean install as that usually works best. PLUS, PE1 firmware seems, so far, to be the best and most stable firmware when flashing v15 fix.
I have setup on the PF2 firmware on 2 S7's, but they were not my phones, and though th owners have told me on several occasions that their phones are much faster, etc... I cannot swear to that because I do not know and have not seen them for some time. But, it did work and has helped significantly!
Anyway, I'd be happy to help you if you want... I hate to hear it didn't work for you!
Really sorry about that!
Swick
This solution is quite solid -- I do notice quite a bit of lag when the phone wakes up from sleep but it subsides quickly. Well played swick.
w0rdie said:
This solution is quite solid -- I do notice quite a bit of lag when the phone wakes up from sleep but it subsides quickly. Well played swick.
Click to expand...
Click to collapse
That's odd... You should try changing setting from within LSPEED app to change that behavior. It may not be possible depending on the profile you're using and the governor your using with govtuner, but... I know my phone has NO LAG, literally. (I'm swearing on my grandfather's gave & my 2 uncles' gaves, too) Seriously!
You may want to TRY my settings from OP - I know they will use more battery, BUT. See if that solves and and work back from there. Maybe you can find what is causing the lag when waking up, and fix it? just a suggestion...
In any case, I am glad it worked (mostly) for you. At least I know that ALL my phones are rooted and have ZERO LAG. That's all I care about. Plus, if you get a MOPHIE case for your S7 you can have WELL OVER 24 hours of battery life/run time!
BTW, the S6 mophie cases work JUST as well as the s7 mophie case - the only down side to the S6 mophie case - they do NOT have wireless charging, the S7 mophie case does! HOWEVER, the S6 case is far superior because it fully locks the phone into place. Whereas the S7 mophie case has a frame that you snap in place around the phone - the S7 mophie case provides FAR LESS "protection" because a small drop will cause the frame to pop off instantly! - Just thought I'd let you know in case you were wondering... heh
Swick
PS. LMK if you'd like me to help - tbh, I'm not sure what I can do to help, but am more than happy to try! But working back from my faster settings from within LSPEED should do the trick! LMK what happens!
swick1981 said:
Govtuner SHOULD run at boot. You should only rerun the tune (or govtuner) command IF you've changed the governor OR soemthing within the kernel!
My Governor is set to "INTERACTIVE" & my GOVTUNER profile is set to "PERFORMANCE".
Here are my LSPEED settings
(Please understand that I sacrifice battery run time for performance and allows my phone to run for a little under a day!)
within the Main tweaks Option (From MAIN MENU options)
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Once finished, PLEASE SAVE THESE CHANGES to you can load them and not go through all this again. Furthermore, make sure you do not disable LSPEED from running at start up! (Several people have had that problem and not realized it)!
I HOPE you're phone goes so fast it flies into the future to tell you the world is going to end! heh
Enjoy!
Swick
Click to expand...
Click to collapse
Awesome! What screen on time are you getting? With BT, wifi always on, location services, bunch of data apps, whether on unrooted U firmware, rooted or V firmware, I always seem to hover around 4 hours screen on time. My phone does sleep well though in all cases (90%+ deep sleep if untouched for an hour). With these settings OP, would you say your phone is now faster than stock?
davidisflash said:
Awesome! What screen on time are you getting? With BT, wifi always on, location services, bunch of data apps, whether on unrooted U firmware, rooted or V firmware, I always seem to hover around 4 hours screen on time. My phone does sleep well though in all cases (90%+ deep sleep if untouched for an hour). With these settings OP, would you say your phone is now faster than stock?
Click to expand...
Click to collapse
Hey, real quick - take a look on the OP in this thread - there are 2 settings that are missing under the kernel tweaks in my LSPEED settings! (Those settings are a big deal, too! SORRY!!!!)
I really can't answer your question because I ONLY run my BT for a few hours and my WiFi is on all the time. My screen brightness is set to auto (but I try to keep it as low as possible).
All I can say is test EACH governor (android has a LOT of governors that it supports) with govtuner's profiles and see what combination is best for YOU. It's possible that you'll get results similar to mine, where I actually got a near doubling of the battery. (Again, it was in conjunction with LSPEED & GOVTUNER and doing LOT of testing / tweaks).
As to your other question - HECK YES, my phone is FAR FASTER than stock. In fact, when I loaded a large spreadsheet (in excel) it would take about 30-40 seconds to load at best. Now, my phone loads these spreadsheets up in about 10 seconds (or less, though that's unusual)!
So, yes - it is FAR FASTER than stock, and I'm not understating things at all (nor am i exaggerating).
Sorry I couldn't be of more help... But I am EXTREMELY confident that you'll get an improvement - I just do not know how much!
Swick
swick1981 said:
Install Universal INIT.D and set the toggle to "ON" (From playstore)
Click to expand...
Click to collapse
Hi @swick, thanks for the comprehensive guide. I'm excited to try it.
The only problem I had with the steps was with Universal Init.D: it was crashing when I tried to run it. No SuperSu popup, nada. I recorded a logcat to troubleshoot.
It turns out I was using JRummy's BusyBox for Android, but after I installed BusyBox from stericson, it started working, popping up a SuperSu permissions request. Must have been some missing file or something.
Thanks again for putting this together.
When you enter su govtuner in terminal what exactly are you supposed to see? Nothing comes up when I enter it
srish2 said:
Hi @swick, thanks for the comprehensive guide. I'm excited to try it.
The only problem I had with the steps was with Universal Init.D: it was crashing when I tried to run it. No SuperSu popup, nada. I recorded a logcat to troubleshoot.
It turns out I was using JRummy's BusyBox for Android, but after I installed BusyBox from stericson, it started working, popping up a SuperSu permissions request. Must have been some missing file or something.
Thanks again for putting this together.
Click to expand...
Click to collapse
No prob, happy to help! I was bound and determined to find a fix, or make one, because of thedarn lag. Thankfully govtuner works!
On another note, I am using jrummy's busybox without trouble. you probably just needed to reinstall busybox from within the jrummy 's app again to update links? (Just a guess though)!
I'm glad its finally working for you! Make sure you test each governor & profile to see what works best for you! There are a LOT of combinations, so enjoy! heh
Swick
Hi everyone, since the announcement that Oppo is closing officially international forums, all the downloads on the forum will be no longer available. :crying:
All the stock roms of COS will be posted here as a link hosted in Mega.co.nz
I will update the post with new links when the upload will finish.
Hope this will help.
I am not responsable for any damage/improper use of this software.
Project Spectrum V1.3i Beta (this is the last version of PS released by OPPO) it's based on android M.
Here's the changelog:
[System]
Optimzied the screen-off gestures, now you can customize a gesture to open an application and the lockscreen interface now supports animation of your gestures
Fixed the issue that when using some carriers you may not be able to use data connection by updating the APN settings
Fixed the issue that mobile signal does not show the H+ icon
Fixed the issue that when OTG storage is removed the notification cannot be closed
Fixed the issue that Skyline notifciation is always on instead of blinking after received a notification
[Lacuncher]
Updated the default launcher, fixed the issue that icons may not be orgnized in alphabtically order
[Camera]
Optimzied the camera improved the image quality and fixed the issue that sometimes it's unable to focus normally
Fixed the issue that after enabled zoom you won't be able to take pictures
Fixed the issue that playing videos recorded by the camera is very laggy
Fixed the issue that when using Beautify mode the viewfinder interface is upside down
[Photos]
Optmized the photos app, fixed some layout issues
------------------------------------------------------------------------------------
Color OS V2.1.5i Stable Version (last update package) Based on Android M
Here's the Change Log:
Added Smart Lock support in Settings-> Safety & privacy
Added the ability to disable Google apps when editing the homescreen
Fixed the SD card problem
[System]
Added the ability to disable Google apps when editing the homescreen
Fixed the issue that some SD card cannot be detected after updated to Lollipop ---- 8monochrome, Madware, prohibited13 etc.
Removed the redundant dialpad tone resources from the ROM ---- Francko76
Fixed the issue that com.android and omacp has stopped error always occur after reboot ---- Zafar Abbas Rizvi
Fixed the issue that "Unfortunately, com.android.systemservice has stopped" ---- Ericjj, Zafar Abbas Rizvi
Fixed the issue that apps like WhatsApp cannot receive notifications after being running for a while in background ---- chewy
Fixed the issue that during playing music using 3rd party app Kiss 92, if there is an incoming call the music doesnot stop playing ---- 8monochrome
Updated the newest patch for the stagefright leak ---- Padre
Removed Frozen Keyboard
Removed the App Center app
Updated the system strings
[Camera]
Fixed the issue that the colorof RAW photos are shown distorted red Color when check with Photoshop etc. ---- opportuno, Mizarurune
Removed the After focus plugin from all apps, as it's not supported on Find 7
[Launcher]
Fixed the issue that weather widget shows wrong weather condition in homescreen ---- Mizarurune
Fixed the issue that email client mayget "port number out of range" error when adding some exchange accounts ---- Furio65
[Security Center]
Fixed the issue that Memory Cleanup& Quiet Time icons in Security Center are having different color from other icons (only having problems on X9006) ---- ericjj
Updated the Whitelist of Memory cleaner, Auto-run management and data saving added most of the popular IM apps to the whitelist to avoid notification delay or cannot be received problem
[Settings]
Added Smart Lock support in Settings-> Safety & privacy ---- TheDeckie, silasje1
Known Issue
N/A
Note:
This full package will wipe user data, please backup your data (you can use the Backup & restore app) before updating. Data on you phone storage such as movies and photos will not be affected.
OTA
OTA for this version is released.
How to Update
If you are using stock ColorOS recovery you can use:
1. System Update (Recommended Because it's the Easiest):
1. Download and copy the package to the root directory (meaning don't put it into any folders) of your phone storage
2. Make a backup with the stock Backup & Restore app
3. Open System Update -> Local Update -> Tap the update package -> Wipe data and update
4. Wait until the update is finished then tap Reboot
5. Power on and use the Backup & Restore app to restore your data.
--------------------------------------------------------
Change Log
[System]
Updated the system strings and fixed some translation glitches ---- Padre, El porcharo, magicseeker, LUCHO, silasje1, ale8530
Fixed the issue that encrypted apps in task manager interface shows Chinese characters ---- Ani6, jach0o
Fixed the issue that there is two GPS icons shown in status bar ---- Francko76
Fixed the issue that there is no driver installer when connected with PC ---- Natherul
Fixed the issue that alarm created by OK Google will not ring at the set time ---- Natherul
Fixed the issue that Nuplayer cannot be used ---- silasje1
Fixed the issue that some notifications are not displayed fully ---- El porcharo
Fixed the issue that when editing screenshot using the Rectangle tool it shows glitches ---- El porcharo
Fixed the issue that when using ChromeCast the SystemUI may crash ---- Aymen
Fixed the issue that when pull down the notification center in lockscreen interface swiftly the notification icons in status bar will disappear
Fixed the stagefright security leak, by adding google's patch to ensure your data safety
[Phone]
Fixed the issue that when receiving a call the number location shows Chinese ---- Mimilicious
Fixed the issue that text input in USSD code interface are white which is unreadable ---- Arvin
Fixed the issue that info in call log details are not displayed properly ---- Padre
Fxied the issue that missed call popup text are not shown properly ---- El Porcharo
[Messages]
Fixed the issue that Danish MMS still cannot be sent/received ---- puma99dk|, Jacob_DK
[Music]
Fixed the issue that music info may get lost after reboot ---- Padre
Fixed the issue that music player cannot remember favorite music ---- krazy, luckywang
Fixed the issue that Italian music ID3 info shows Chinese characters, you can now avoid this by changing the region to Italian ---- savvakos
Fixed the issue that Music player unable to view Swedish letters (ö ä å), you can now change the region to Sweden ---- Natherul
[Lockscreen]
Fixed the issue that widget text on lockscreen are not clear enough to read---- Mimilicious
[Calendar]
Fixed the issue that there is a year behind the year 2015 in Calendar interface ---- Kim Miene
Fixed the issue that OPPO Calendar will automatically change the time zone to GMT-4 which make all the events starts too early ---- silasje1
[Clock]
Fixed the issue that some alarm names are not displayed fully when there is enough space left ---- El porcharo
[Weather]
Fixed the issue that when lock the screen in weather interface and unlock the weather interface become black for a while
[Security Center]
Fixed the issue that power saving settings are not save after it's turned off ---- benoita74, Z3RO
Fixed the issue that virus scanner appear when some apps are installed ---- krazy, Bedsurfer, andrea9293
[Settings]
Added eye protection mode in Settings -> Display ---- Jempol
Added air gesture in Settings -> Gesture & motion ---- TGPATEL
Fixed the issue that Wi-Fi hotspot is not working under some carriers’ network ---- marker
Fixed the issue that Settings > Gesture & motion > Screen-off gesture > Add a screen-off gesture > choose a gesture > Open an app > the list is still sorted randomly instead of alphabetically ---- El Porcharo
Known Issue
N/A
-----------------------------------------------------------
CHANGE LOG
Refined UI Design
The ColorOS 2.0 has inherited the UI design of ColorOS 1.0, by removing redundant elements from the 1.x icons the new design are more minimalistic and easier to recognize.
Global Gaussian Blur Effect
System wide Gaussian blur effect makes the whole system looks more beautiful and consistent in different interfaces, such as the notification center, folders, music now playing interface etc.
System Wide Animation
The ColorOS 2.0 is more energetic, with system wide transition animation the whole system comes alive, each operation seems so natural and fluid.
Live Weather 2.0
Added a new weather effect "Haze", given sound effects for some effects and you may found more surprises when using the live weather 2.0.
Global Gesture Panel 2.0
The new gesture panel is now activated by slide up from the bottom of the screen. Each gesture you've used can be recorded and shown on top as a reminder.
Redesigned Task Manager
The new task manager design shows every task running in background as a card you can simply slide it up to close it or slide it down to lock it or tap the end all button to close them all (locked apps will not be closed).
Easy Crop for Screenshots
After you've taken a screenshot you can pull down the notification center to crop, share or delete it.
Single Layer Launcher
The changing from dual layer to single layer launcher is not simple a win/lose situation, both design has it's own advantage and disadvantage. ColorOS decided to go with single layer design is just another step towards the purse of simplicity and perfection.
Super Power Saving
By reducing animation, underclocking the CPU or shutdown all applications except for calls and messages your phone can be under deep power saving mode so as increase the battery life as much as possible.
Memory Cleaner
Added "Memory Cleaner" in security center, which enables you to control and release memory more easily.
Other Detailed Improvements
Redesigned the guide interface, now it's able to auto select the language according to your SIM card
Changed the default lockscreen to "Slide upward to unlock", added Call & Messages shortcut in the default lockscreen
Added the double tap to blurry the wallpaper in Settings ->Gesture & Motion -> Screen-on Gestures
Added the feature to show network speed in status bar, Settings -> Display -> Show network speed
Added resolution settings for ultra-HD photos, you can now choose between 50MP and 24MP
Added continuous play settings in video player, when you disabled it the player will not continue to play the next video in your phone
Added USB debug options in notification center, when your phone is connected with your computer
Added the ability to manually adjust the screen brightness when auto-brightness is enabled
Added file safe in the "Files" app, files added into file safe will not be shown publicly
Added the ability to sort contact list by Given name/Family name
Added a quick to top button in Files, Email and Message list interface
Optimized the cleanup feature in "Files", added the function to delete large files and duplicated app installation package.
Redesigned the calendar interface, which is now more elegant
Removed the "Notes" app and replaced it with Google keep as the default note app
Optimized the "Backup & restore" app improve the back/restore speed and added the ability to backup homescreen layout, so that your apps & folders will all be backed up
Integrated all security related tools into "Security Center", such as App Encryption, Data Saving etc.
Updated the pre-installed Kingsoft Office app
KNOWN ISSUE
After you flash this version you cannot flash back to 1.2.x version directly, for Find 7a users you can flash the ColorOS V2.0.3i Beta first then flash back to 1.2.x version, for Find 7 users please flash this recovery here (Find 7 Recovery.zip) then flash the 1.2 version.
-------------------------------------------------
[B]Project Spectrum:[/B]
Filename: X9006&X9076_Spectrum_V1.3i_Beta_full_wipe.zip
File size: 679MB
MD5: E6864ED7905F58FFD7833A7554988739
[B]FULL WIPE PACKAGE[/B]
Download: [url]https://mega.nz/#!yA0zwBKI!fu1jhMQ8zlWLJnfb6npxY3UcWOWXSXxzLGdtEaX3Nts[/url]
[B]Color OS 2.1.5i stable (last update)[/B]
Filename: X9006&X9076ColorOS_V2.1.5i_full.zip
File size: 1.01GB
MD5: 85EF1B3C04C6A5E3EFC07C3C0455D17A
[B]FULL WIPE PACKAGE[/B]
Download: [url]https://mega.nz/#!nVsxjaRS!JJ9gm8wgauTxcy2NjDwwk_NPSpxkLZi4NvfeFV-iytY[/url]
Download:
Full wipe Package:
Filename: X9006&X9076ColorOS_V2.1.3i_full.zip
File size: 976MB
MD5: F2EB74D3EF1EE038521639FFC848E3D5
Download: [url]https://mega.nz/#!2YcR2AjL!iKi5wargsEsYCx15IhAFx8AH-flwrO8ZuaXr1KLPIk8[/url]
Filename: X9006&X9076ColorOS_V2.0.0i_full.zip
File size: 914MB
MD5: 3631987E53E3F61E86F33C47AE864F2A
Download: [url]https://mega.nz/#!Sc9w1BqL!qBVQ1Xask6h5jUhPZaR19aybRD3zikUG-6zRlgilO3Q[/url]
[B]EDIT 22/03/2020[/B]
Stock recovery bundle: [url]https://mega.nz/#F!eEsQxQTS!5aLY0v6H2ohnk6bxaNQSPw[/url]
Wei recovery is compatible also for X9076 and allows you to install almost any stock firmware (sometimes installing updates may fail).
[B]Link to all roms and for Find 7 that i have: [url]https://mega.nz/#F!yFNlhIRZ!tFmul6ZAgp-CcPwJ0r1sXQ[/url][/B]
Oppo Find 7-7a guide to [B] partition tool[/B] to my google drive: [url]https://drive.google.com/open?id=1u7yV8sVO8We_lwuiLWTXUbg6_hNdpGvK[/url]
I do not own any of these elements, the copyright belongs to owners.
Color OS V2.1.5i Stable Version.
Some one, please create Volte patch for the above version?
Unable to download
Can you please mirror in another server? im unable to download from mega the 900mb file with free account
Just a correction. ColorOS 2.1.5 is Lollipop, not Marshmallow.
Hello, do you have the stockrecovery.img for oppo find 7. Please share
blindalzaga said:
Can you please mirror in another server? im unable to download from mega the 900mb file with free account
Click to expand...
Click to collapse
Hi, I couldn't finish to upload all the ROMS because my computer gets broken. Soon I'll upload all files also in another hosting service.
Hyperhonda said:
Hello, do you have the stockrecovery.img for oppo find 7. Please share
Click to expand...
Click to collapse
I'll upload as soon as possible all files I have, including the stock recovery.
How to upgrade my Oppo find 7 Stock rom coloros v1.2.9i to this Color OS V2.1.5i Stable Version (last update package) Based on Android M ? need to root or just follow that step??
Is this ColorOS Lolipop the same as the download for Find 7a on the OPPO downloads page?
https://assorted.downloads.oppo.com/firmware/FIND7/FIND7WX_12_OTA_INT_014_all_svn10682.zip
I can't figure out the version from the link.
Alsander95 said:
Download:
Full wipe Package:
Filename: X9006&X9076ColorOS_V2.1.3i_full.zip
File size: 976MB
MD5: F2EB74D3EF1EE038521639FFC848E3D5
Download:
Click to expand...
Click to collapse
Hey, thanks for the upload.
the Checksum seems incorrect for this package though
i've downloaded it multiple times and double checked it.
559CDD32B98E383DD77707F19B0068FE is what i get.
Great job
Thanks this is help for me
Project spectrum 1.3
Hi there, can anyone help me with network issue on find 7 x9077 after flashing to project spectrum 1.3 there is no cellular network, on oppo community website was a solution for this issue but now I can't find it....
Find 7 is now totally not working/showing any screen after changing from ColorOS_V2.1
Hi, my Find 7 is now totally not working/showing any screen after changing from ColorOS_V2.1.5i to ColorOS_V2.0.0i. I'm scared and Kindly seeking for help please! thank you in advance.
[email protected] said:
Hi, my Find 7 is now totally not working/showing any screen after changing from ColorOS_V2.1.5i to ColorOS_V2.0.0i. I'm scared and Kindly seeking for help please! thank you in advance.
Click to expand...
Click to collapse
Why would you downgrade? Anyway if the screen is black it's probably a bad flash or wrong firmware.
You could try fastboot and flash another modem driver.
But dont be scared anyway the find7 is almost unbrickable.
There's a Qualcomm tool that reverts back to stock
There are guides here on XDA just search. But you will loose your data.
Skickat från min Find7 via Tapatalk
[email protected] said:
Hi, my Find 7 is now totally not working/showing any screen after changing from ColorOS_V2.1.5i to ColorOS_V2.0.0i. I'm scared and Kindly seeking for help please! thank you in advance.
Click to expand...
Click to collapse
https://mega.nz/#!Sc9w1BqL!qBVQ1Xask6h5jUhPZaR19aybRD3zikUG-6zRlgilO3Q this is the link for 2.0
Inviato dal mio iPhone utilizzando Tapatalk
Gattsuh said:
Why would you downgrade? Anyway if the screen is black it's probably a bad flash or wrong firmware.
You could try fastboot and flash another modem driver.
But dont be scared anyway the find7 is almost unbrickable.
There's a Qualcomm tool that reverts back to stock
There are guides here on XDA just search. But you will loose your data.
Skickat från min Find7 via Tapatalk
Click to expand...
Click to collapse
Hi, The reason why I tried to downgrade is due to camera issue. I think the original ColorOs is better in terms of camera. Thanks for the advice. I'm not sure what happened as my Find 7 comes back to ColorOS_V2.1.5i just after few hours from black screened. Thank you.
I install Project Spectrum V1.3i Beta into my X9076 Find 7. So far so good. Thank you for keeping the download link alive.