Related
A new version is now out, and it contains some major improvements in terms of performances and speed. It has Las_Venturas 1.0RC3+ kernel packed (thanks @jordfaz), the new camera fix (thanks @stritfajt), the scripts are now up and running (thanks @riemer for the tip), fixed app2sd and cache2cache script, Habarug's modded Phone.apk (disabled the red hang up button), a new Evervolv Toolbox + a superb boot animation (probably the best boot animation I've saw from 2009 till now). It also includes a nice script called 13cpuspeed from where you can set your own values and governor. You can see the values changed in evervolv toolbox under performance tab.
Right now when you flash the zip, the cpu speed is OC'd at: 264-652 smartass V2. I suggest you increase the min value to 352mhz. I've done this to avoid flashing a 'safe' kernel on top of the rom for those heroes that cannot support higher cpu speeds and also it's a safe way to change your values from within the script, no need for 3rd party app.
Why it is improved? Because in v2 and lower, the scripts were lying in init.d but they did not activate on boot thus making them basically useless.
But there is one more script left in init.d that it's not working. This is the *****! '02ramconfig'. This basically sets the internal task killer to higher values giving our hero a little boost in speed. I have tried many ways to force it to start. IT seems that when the boot animation is on, the values are set according to the script, after that, the values turn to normal.
We will investigate this further as we move our focus towards 4.0.5 when the sources are out. But at the time being I will show you other ways to activate the script, so don't delete it:
Keep in mind that you need to do it on every boot. Just choose a way that suits you best and do it every time you reboot your phone.
1. install AMM - auto memory management - from the market, and set it at mild or agressive.
2. If you have android sdk installed on your computer, just make this:
enter cmd and navigate to your android-sdk\platform-tools
Connect your device (make sure you have usb debugging enabled from settings).
Type adb shell and now you should type this command:
Code:
echo 1536,3072,4096,21000,23000,25000 > /sys/module/lowmemorykiller/parameters/minfree
after this, to see if the values are set, you can try this:
Code:
cat /sys/module/lowmemorykiller/parameters/minfree
and if it looks like this; 1536,3072,4096,21000,23000,25000 you are ready to go.
3. If you have 'Root Explorer.apk' you can press on any of the script from init.d (minfree, cpuspeed) and select run as Linux Script Handler -> Execute.
And the values should fire up. Note: for cpu speeds, do this after you've changed your cpu settings using a text viewer (explorer works also).
I suggest you all guys flash this latest version because includes almost all major fixes and the call drop should be fixed in this. Also, you can install apex launcher for a better performance, you will never regret it. You can enable some cool features that LV Kernel comes packed with (zRam or Kernel samepage merging briefly known as ksm). I suggest play with ksm and see how it goes.
Another nice tweak you can make to increase performance is to limit the processes to only "4" from settings-developer options-background process limit. You can play with this value as well but I suggest leaving it at 4 if you want to be enabled.
Disclaimer: I am not responsible for what YOU do to your phone...
You assume all responsibility and risk associated with flashing any ROM. Make a backup!!!
What's Working:
camera
touchscreen
physical & capacitive buttons
wifi
gps
data
calls
sms
mms
audio, ringtones, notifications, alarms
microphone
root
adb
sdcard
usb mass storage
sensors
vibration
trackball navigation, selection, light
notification / charging LED
Partially Working:]
Stock ICS gallery app - displays black boxes. must press and drag finger to shows pics
live wallpapers
Not Working:
camcorder
bluetooth
wifi signal strength icon display
built-in screenshot feature
google music app
Hwa
you tell me....
Known Bugs:
- SetupWizard reloads and turns a black screen for a couple of seconds at start up.
- screen turns black for a couple of seconds when using the gyroscope.
Keep in mind that this is in the early stage of development so not everything will be completely stable or working perfectly.
You flash this ROM at your own risk! Be sure to make a nand backup and do a full wipe before flashing.
Downloads:
ROM - ICS 4.0.3 v2.1.1
HeroICS_4.0.3_V.2.1.1_lvkernel1.0RC3_signed
ROM - ICS 4.0.3 v2
http://www.2shared.com/file/y9H80-YS/hero_ICS_403_v2.html
Lights format all (use it to format boot, cache, data and system)!!
https://hotfile.com/dl/153710444/c085539/Lights_Format_All.zip.html
If you have trouble with bootloops and freezing of youre phone than try to flash this kernel!!
Flykernel 13 max 614Mhz
https://hotfile.com/dl/153728037/28f7ceb/FlyKernel-13-M614-m176.zip.html
No need to flash Gapps, they are included in this build!
Video preview of the ROM: (Thanks to gkillerx)
http://www.youtube.com/watch?v=B8zvkA8SQzs
* Recommended Flashing Instructions * *YOU CAN USE CWM OR AMON_RA***
1 - full wipe: data + cache + dalvik cache
2 - flash lights format all
3 - flash the ROM zip
4 - flash the kernel from above if youre phone does not support cpu settings of 652Mhz
5 - reboot: the first boot will take awhile
6 - ensure everything is loaded and settled by letting the screen timeout and waiting a minute or so before waking it up and proceeding
7 - go through the google setup wizard and then wait another couple mintes to allow the rest of the ROM to load up and any google data to sync
8 - reboot and allow things to load up again
9 - everything should now be ready to go
* Tips *
Enable "Force GPU Rendering" in "Settings - Developer Options" (it helps flinger to be more smooth).
Disable "Report usage and errors" in "Apex Settings - Advanced settings".
Use setcpu.apk or similar overclock app
Use autokiller.apk or similar taskkiller app
In settings->developer options: make sure window & transition animations are off
In settings->language & input->android keyboard: turn off popup/vibrate on keypress
Can open a running apps list by long-pressing the home button & swipe(or long-press) to clear (useful if an app won't open or system slows down to clear out some memory)
Disabling an app is very easy in ICS: either through the manage app screen or by dragging a particular app from the drawer to the "app info" section displayed at the top of the screen, you'll find a button to disable that app
Performance-wise it could be worthwhile to play around with the "background process limit" and "don't keep activities" options in settings->developer options
The ICS launcher makes it simple to create & use folders: just drag one icon on top of another, let go, and they will now be in a folder together which you can name whatever you like.
Apex settings - drawer settings - Disable Show Widgets tab (it helps on app drawer faster open/close).
*Change log*
ICS 4.0.3 V2.1.1:
- changed kernel to Las_Venturas 1.0RC3+ (thanks @jordfaz)
- the new camera fix (thanks @stritfajt)
- scripts up and running (thanks @riemer for the tip)
- fixed app2sd and cache2cache script
- Habarug's modded Phone.apk
- A new evervolv toolbox
- changed the boot animation with a beautiful one.
- added script 13cpuspeed
- limited the cpu at boot to max 652 mhz/smartassV2.
- fixed scarry OFFSET error when flashing the new rom!!
ICS 4.0.3 v2
- Added camera libs (great thanks to stritfajt)
- Replaced Quickpic with working quickpic
I would like to thank the following people for their dedication and hard work on this ROM:
1ceb0x
stritfajt
lost101
nickholtus
vanaf
I hope that a dev could help solve the problem with bluetooth
and the error while searching for other mobile networks. If you like to help send me a PM !!
If you like donate me a beer for my work hit "donate to me"
dont forget to hit the thanks button
looking forward to flashing this. cant flash as of now because need a stable phone but hopefully i'll be able to test sometime next week
i really hope its possible to get a stable ics rom on the hero *fingers crossed*
Nandroiding now Will test for a few hours before I go out
Edit: Slow download or is it just my comp?
@samm000: thank you for your work, can't wait to flash this rom, gotta see the camera working
@Habarug : yeah sloow download speed, it will take 1 hour to download the rom but I am patient
Edit: I flashed it after a full wipe, but not even after waiting 30 minutes it never passed beyond the splash screen (HERO screen), so it was in a bootloop.. gonna try to download the rom again when i get home from work.
Okay, I finally got it working here. Keyboard and pulldown and such is really smooth! but lots of apps, like search, browser, email, voice search etc is FCing all the time :/ Even Launcher is, so I can't use it ....
Edit: trying to reflash
Edit2: ....this is so awesome
Edit3: I'll try this today There are some resize issues, like the statusbar widgets being really high, I can try to fix it when I have time
Ciprilik said:
@samm000: thank you for your work, can't wait to flash this rom, gotta see the camera working
@Habarug : yeah sloow download speed, it will take 1 hour to download the rom but I am patient
Edit: I flashed it after a full wipe, but not even after waiting 30 minutes it never passed beyond the splash screen (HERO screen), so it was in a bootloop.. gonna try to download the rom again when i get home from work.
Click to expand...
Click to collapse
Try to reflash the kernel with flykernel13, that could solve the problem
keep me in touch
samm000 said:
Try to reflash the kernel with flykernel13, that could solve the problem
keep me in touch
Click to expand...
Click to collapse
ok gonna try now
Edit: Nope it still bootloops : full wipe, flash rom, flash flykernel 13, reboot ... stuck on Hero screen for 20 minutes straight. I think the zip I downloaded is faulty ... gonna try to download and flash it again when I get home.
Ciprilik said:
ok gonna try now
Edit: Nope it still bootloops : full wipe, flash rom, flash flykernel 13, reboot ... stuck on Hero screen for 20 minutes straight. I think the zip I downloaded is faulty ... gonna try to download and flash it again when I get home.
Click to expand...
Click to collapse
I will upload the next update on hotfile server perhaps that it will solve youre problem.
has anyone actually gotten this to boot? anyway, try the CM9 launcher, it looks exactly like native ICS launcher but with more options and on glassmacka rom it was reported to be faster than the native launcher
Notn4 said:
has anyone actually gotten this to boot? anyway, try the CM9 launcher, it looks exactly like native ICS launcher but with more options and on glassmacka rom it was reported to be faster than the native launcher
Click to expand...
Click to collapse
The rom boots!!
be sure to wipe all data and system (format boot, data, system and cache in recovery)
I use my ROM for A several days now and I can say that the rom is very fast
there is no need to install other launchers.
if you like you can allways install other launchers.
Thank you so much for this ROM!
After having it installed and used it only briefly I must say it works pretty smooth. It's not slow at all! Feels great that our old HTC is still in the game!
I can confirm that its fast and stable
Sent from my Hero using XDA
Thank you,
I do my best for our hero
However, I will need help to solve the problem with the error when searching for other mobile networks.
finger crossed...
Is this rom ported from http://forum.xda-developers.com/showthread.php?t=1352170 this?
In aplha 1.0 yes, I had a lot of problems making it work right because the port didnt work well.
The other builds are made by me.
I have use the camera base as the base for our camera
Sent from my Hero using XDA
flashing "OpenGL_2.0_by_harut56.zip" will turn the rom's "ro.opengles.version=131072" into "ro.opengles.version=65537" ... isn't that going to revert OpenGL from 2.0 to 1.1 or am I wrong and confused?
Ciprilik said:
flashing "OpenGL_2.0_by_harut56.zip" will turn the rom's "ro.opengles.version=131072" into "ro.opengles.version=65537" ... isn't that going to revert OpenGL from 2.0 to 1.1 or am I wrong and confused?
Click to expand...
Click to collapse
you are right,
I have turn on the hw acceleration in alpha 1.0.2 but didnt test it yet,
it looks like that it can work on opengl 2.0 without flashing it.
please test it again
Thank you for that
no problem gonna leave my phone to charge for a while .. it's at 3% , I'm gonna flash the rom in a few hours.
Ciprilik said:
flashing "OpenGL_2.0_by_harut56.zip" will turn the rom's "ro.opengles.version=131072" into "ro.opengles.version=65537" ... isn't that going to revert OpenGL from 2.0 to 1.1 or am I wrong and confused?
Click to expand...
Click to collapse
OpenGL mod is based on modified OpenGl 1.1 libs,thats why version is 65537,you can try with version 131072,I haven't tested it yet.
Translated Link:
http://translate.google.de/translat...dex.php?showtopic=479224&st=120#entry23833639
Original Link:
http://4pda.ru/forum/index.php?showtopic=479224&st=120#entry23833639
- Based on China Unicom version of the official EmotionUI latest upgrade package B115 production, complete ROM production
- Streamlining of the system most of the unwanted programs, such as promotion of operators, telecom customized help and other procedures, reducing the ROM size, reduced memory footprint
- Added full ROOT permissions
- Use SuperSU latest version 1.41 as a super administrative privileges
- Updated Busybox and su binary file
- Streamlined out CUST in music and video, as well as unwanted pictures
- Optimization of the system program zipling further optimize the system memory usage
- Turn on call recording function (call will see more options click the record button)
- Modify Call (millet calls) as well as the alarm tone (Secret Garden)
- Open Theme Manager Online Themes Gallery
- Adjust the boot order of the default desktop icons
- Added new ATX Advanced Settings v0.3, see the following detailed description
- Fix the previous user swipes down notification bar after losing control of the problem (if there are questions, please timely feedback to me)
- To join the list of animation from mokeeos can turn off the ATX advanced settings and effects replacement
- Set up by adding the Quick Start option, Huawei's 5 seconds boot function, the first boot enabled by default
- Join ZTE screen assistant tool, open your own needs
- According to contest requirements, join the ING market, potatoes video client, the brush into the back, in the case of open networking for me a moment to complete the entry support
The new ATX v0.3 Advanced Settings
- Support the on / off status bar shows the percentage of power
- Support on / off GSM network crack (reboot to take effect) - Telecom Edition exclusive
- Support your lock screen is turned on / off mobile data connection
- To support the boot Mute
- Support Huawei and Google lock screen lock screen toggle native
- Support for the user to streamline Google Services Framework, reducing memory footprint (first start Google Framework installed by default)
- Join the engineering mode Quick Entry
- To join the list of super brightly animated, animation effects can define, can also be self-closing
Click to expand...
Click to collapse
Instuctions:
http://translate.google.de/translat...index.php?showtopic=479224&st=0#entry23399079
Anyone tried?
I think it cant work with closed BL and without working fastboot commands?! (the install script inside the package just use fastboot commands to flash)
the language seems to be Russian on that ROM
Ruchira88 said:
the language seems to be Russian on that ROM
Click to expand...
Click to collapse
This custom ROM taked from china forum.
I installed that some time ago ... from the russian board and it worked ... but as it had no informations bar, I went back to B107
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
List of Chinese custom Roms: http://cn.club.vmall.com/forum.php?mod=viewthread&tid=199781&extra=&page=1&mobile=yes
tauio111 said:
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
Click to expand...
Click to collapse
Have you actually tried the ROM itself ? Just curious, it seems interesting and I may give it a try.
Otherwise sorry but can not help with the apk.
LL13-
No, I have not tried this ROM, since I've had this phone for 2 weeks only. I usually wait a few months before flashing a custom rom. ATX advanced settings are what I'm only curious about in that rom, because it has an ability to disable the huawei lockscreen and use the AOSP one instead.
Hello.
This is a Q&A or F.A.Q Thread for all 4.4.x ROMS.
First of all note that for flashing any 4.4.x ROM, you have to have a 4.2.2 TW ROM or a stock 4.2.2 ROM or if you have already flashed any 4.4.x ROM, that will be it.
Links(4.2.2):
http://www.sammobile.com/firmwares/3/?download=22406 (I9082XXUBMK3)(best one around)
Mirror:
http://www.firedrive.com/file/CE8FD4FAD76F0EB3
Note:
1) Don't ask for help on roms which are in alpha or beta stage. Developers will solve them.
2) Note that most Samsung stock apps will not work on these roms.
3) Don't ask about ETA's of dual sim. Till date only cm-11.0 has implemented dual sim.
F.A.Q 's:
Post#2: Common F.A.Q' s
Post#3: CM-11.0 F.A.Q' s
Post#4: ProBam KK F.A.Q' s
Post#5:Resurrection Remix F.A.Q' s
Post#6: PAC ROM(alpha stage)F.A.Q's
Post#7: XenonHD ROM(WIP stage)F.A.Q''s
Post#8: Carbon ROM and Slimkat ROM
F.A.Q's
Post#9:
Post#10:
(post is wip)
Common F.A.Q 's:
*Which build should I flash?
*Depends upon you, which build you like the most.
*Which ROM should I choose?
*I will not answer these type of questions. It is your wish which ROM to flash.
*How to upgrade to a newer build of the ROM?
*Simply flash the newer build upon the older one.
*Which recovery should I use?
*Use pawitp's 6.0.4.5 CWM recovery non - touch. Or use xenon92's 6.0.4.7 CWM recovery non - touch.
*When will new builds release?
* Please don't ask for ETA's. Developers will release new builds when they get time.
(WIP)
CM-11.0 FAQ
How do I enable Dual SIM?
Starting from the 20140309 release, Dual SIM support is available on an experimental basis. To enable or disable, run the following command from adb or terminal emulator and then reboot. SIM Settings can then be found in Settings -> Multi Sim Settings.
Enable:
Code:
su
setprop persist.radio.multisim.config dsds
Disable:
Code:
su
setprop persist.radio.multisim.config none
Note that Dual SIM mode currently has the following limitations:
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
The QuickSettings tile will display the status for the currently selected SIM for data
There is no arrow activity indicator in the status bar.
Changing 2G/3G network mode using the QuickSettings toggle is not supported, only do it from Settings.
Changing 2G/3G mode in Settings may show too many options if the language used is not English. If more than 3 options is shown, only use the 3 top options (which will be WCDMA only/GSM only/WCDMA preferred regardless of the actual label shown).
3G may not work properly if Dual SIM mode is enabled with only 1 SIM inserted
Cannot set different ringtone for each SIM
Baseband version not displayed in Settings
What are incremental/delta updates?
Delta updates allow updating from one version to another downloading only the difference rather than the full ROM, for those on limited bandwidth. They are named like "cm-11-20131215_to_20131216_delta-UNOFFICIAL-i9082.zip" which means that it can be used to update from 20131215 to 20131216 (simply flash it in recovery like any other update). Delta updates will not work if you have installed custom kernels or other system modifications, including editing build.prop. In those cases, downloading the full update is recommended.
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Can you add Feature X to the stock ROM?
No. I don't work on stock ROMs.
What kernel does this ROM use?
A slightly modified version of the stock kernel, the source code is linked above.
I've heard that Broadcom doesn't release source, how can you make this ROM?
Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Can I use your ROM as a base?
http://source.android.com/source/licenses.html
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod. (In other words, you must say that it is based on pawitp's unofficial CyanogenMod, but is not related to CyanogenMod in any other way.)
Will you make this official CM?
Due to the amount of work and commitment involved, I am not planning to make an official CM port.
Can contacts be saved to phone/SIM?
No. It is not supported in AOSP-based ROMs.
Can I mirror your ROM?
You're free to, but I will not list it in this post.
Is overclock (OC) available?
Since 20140101 build, 1.3 GHz OC is available in Settings -> Performance -> Processor (enable developer mode first). Higher frequencies are not enabled since benchmark does not show additional benefit.
Will feature X from a previous version of CM be implemented?
I don't know, probably will be, eventually. I don't really involve myself in the feature-set side of CM.
(Answered by pawitp)
Reporting bugs:
pawitp has strictly mentioned in his thread that you report bugs in his thread.
ProBam KK F.A.Q
when probam in black turn on , the systemui make force close
try to switch off black ui then restart and try enable it again
after dirty flash the device hangs and systemui make force close
you need to make wipe all and clean cache and make fresh install in this case
when try video recoding the device freeze or slow down
screen video record with ondemand or pegasusq governors u will have a laggy recorded video. If you try with performance governor from performance in settings , then the video will be a lot smoother.
Camera crashing some times and not works anymore "camera not connected"
the rom included an small application "camera restart" you can use it for fix this issue
titanium recovery not restore my applications
For those who cannot find their previous files, because CM based rom will target the sdcard storage to use root/0/ directory.
So normally all the files besides the root/0/ directory will not be shown on the file explorer.
To solve this, you will need a file browser that has ROOT capability, eg. Root Explorer
then go to mnt/shell/emulated/ all your file should be here.
Now move all the files into mnt/shell/emulated/0/ folder.
Should solve the problem.
Privacy guard IS working?
after enabling privacy guard in security settings
you have to switch to settings>apps and then choose to enable or disable each app individually.
I'm sure nobody would want to tick every single app, that would almost be the same as enabling airplane mode.
I want PIE!
Here is the alternative PIE
Not all F.A.Q 's apply to our device.
(answered by codexc)
Resurrection Remix F.A.Q 's
« How can i change the DPI?
Check here.
« I change the DPI and i have issues with the Play Store (Incompatible or some apps didn't appear) ¿What can i do?
Flash the MultiDPI Play Store by @MyLifeRocks10, you can find it here.
« How can i take a screenshot?
Just press (and maintain at least 2 or 3 seconds) the buttons Volume Down + Power
« « A temporary fix to the USB tether...
Take a look on this post by DeltaSync
(answered by westcrip)
PACman FAQ
PIE FAQ
Q. What is PIE?
A. PIE is a new way to interact with your notifications. It provides easy gesture based interaction with all your system information without taking up valuable screen space. PIE is what you see in this image.
Q. How do I access Pie?
A. Swipe your finger from the pie gravity edge (default is the bottom) toward the center of your screen. While keeping your finger on the screen, drag your finger to the desired button and release to click.
Q. My PIE doesn't look like the ones in the screenshots. I don't see the Clock or notifications.
A. Notifications work either through the status bar or PIE. If the status bar is enabled, PIE reverts to just the softkeys. To enable the full PIE experience, enable Expanded Desktop by going to Settings -> System -> Power Menu -> Expanded Desktop (Status bar hidden). Access the power menu and turn Expanded Desktop on.
Q. How do I change PIE colors?
A. Go to Settings -> Hybrid Properties -> Interface and change the Navigation bar color.
Q. Buttons or keyboard rows near the edge of my screen are nonresponsive.
A. PIE's trigger area overlay is covering the edge of your screen. Change either the Trigger Area or Pie Gravity in Settings -> System -> PIE Settings.
Q. I don't like PIE, how do I turn it off?
A. To disable PIE set Trigger Area to None in Settings -> System -> Pie Settings. Remember to disable Expanded Desktop to turn status bar on again.
ROM FAQ
Q.Do I need to do a full wipe before installing this ROM?
A. Unless coming from a previous version of PACman it is highly recommended to do a full wipe before installing. This includes coming from ParanoidAndroid ROMs.
Q.What do the settings in Hybrid Properties do?
A. ParanoidAndroid has an extensive guide to the settings at this thread: [GUIDE][PARANOIDANDROID] A Complete Compendium on ParanoidPreferences [PA-Settings] Please do not post questions related to PA Settings in this thread, they are not ROM specific and all we'll do is point you to that thread.
Q.How do I turn on the Navigation Bar??
A.To enable the NavBar open Hybrid Properties, swipe the screen to the right to peek through to the menu.
Select Interface, now set your desired NavBar size with the slider.
Q.Something isn't working. What do I do?
A. First, make sure you are running the latest stable version. That should solve half the problems. If it persists, backup data using Titanium and do a full wipe reinstall. If the problem persists, report what it is and what triggers it so the dev can duplicate it.
(put together by IconRunner)
All F.A.Q 's regarding XenonHD ROM can be found here:
http://forum.xda-developers.com/showthread.php?t=2075368
F.A.Q 's regarding Carbon ROM and slimkat ROM can be found in chotu222's FAQ thread.
R8
Sent from my GT-I9082 using Tapatalk Pro
And on pac 4.4 alpha-1 by k2wl.
R9
Sent from my GT-I9082 using Tapatalk Pro
And on pac 4.4 alpha-1 by k2wl.
Deleted
Deleted
Changes:
Phone application:
- Auto record for incoming and outgoing calls. If Incoming calls recording is on, application will always open in full screen mode (currently no way to start record in popup).
- Adjustable after call delay.
- Record or Add call button (select in Rom Control).
- 2 additional modes in "Network mode" select dialog. Long click on data toggle brings "Network settings" but not data usage.
System:
- Google *backup* wake lock fix (not script, fixed in code).
- Kill foreground application by double, triple or quad home click (first free combination)
- Kill foreground application by long clicks.
- Full screen mode settings
- Torch by home (1.1.0, volume keys do not work in deep sleep mode)
- Data traffic, record, screenshot, 5way reboot in Power menu. Select buttons in Rom Control. Record button will trigger recording, but not start only, like in another ROMs.
- Multiwindow on/off setting.
- 180 degrees rotation setting.
- Settings for screen on, and sound when connecting power.
- Setting for screen on by "Home"
- 12 buttons Toolbox.
SystemUI
- Potato Gradient (may be switched off in ROM Control)
- Hide Silent, Alarm & BT status bar icons.
- Custom status bar icons color. All icons, all text (not some of). No conflicts with dark icons on white background feature (color negative or dark mode)
- Potato clock with new options. Can select stock clock, or custom format. Optimized. Battery friendly (off on screen off).
- Tap on Date & Time in notification area start Clock or S Planner. Long tap - settings.
- %% on stock battery.
- 3minit battery with additional settings. Optimized. Battery friendly.
- Data traffic and current transfer rate in Notification. Can be switched off. Adjustable colors. Click launches Data usage statistics. (switched off on notification collapsed)
- Customable Lock screen single text clock. Support for RTL. Next alarm, seconds.
- Quick launch panel in "Recents". Enhancement: After exit from application, started by QL, you'll be returned to previous application, but not to home screen. Additional settings in ROM Control.
- Memory usage bar in "Recents"
- Clear memory button in "Notification"
More, that I don't remember.
ROM Control video demo - https://drive.google.com/open?id=0B-CE1vlk7OYkUFVtb0pQR2l4OG8
Credits to Tkkg1994 and boostermbkking for some great ideas,
- Samsung for their software
- authors of 3minit, potato and lock screen weather mods
- svadev for the deodex tool
- Chainfire for the root access
- sound mod V17 thanks to zubi182
- Wanam and rovo89 for the Xposed
- amarullz for aroma
- Gayos24 and daxgirl for ROM control
- topjohnwu for systemless xposed
- If I forgot someone, PM to me!
- tamirda for UDS toggle and some examples, how to add modifications in his great ROM.
- mwilky and Tkkg1994 for his fingerprint after reboot mod.
- @Androidwizzard, @sanoc69, @Umair Ahmad for installer fix.
- djb77 for TGP Kernel.
You may want to buy me a beer? You can donate down here
Installation:
1. Follow instructions for all custom ROM's (you'll find a lot in this forum, no wipes needed)
2. Flash update if released.
Download:
ROM: https://yadi.sk/d/yeBqnrl234DGiC or https://drive.google.com/file/d/0B-CE1vlk7OYkTHlveFVPbGFHS2M/view?usp=sharing
Update: https://yadi.sk/d/8VQZjj__34N6br
Boot+Modem: https://yadi.sk/d/BGKE0_dc347R6s
Old version:
ROM: https://yadi.sk/d/w2RxP4tuxupfD
Update: https://yadi.sk/d/rElf0BMBxyFhr
Boot+Modem: https://yadi.sk/d/WW_PeJENxuqXg
Change log:
6.0.0 - Re-based on G930FXXU1BPL2 (9689434). Updated kernel, root, systemless modules.
6.0.1 - Fixed QS edit bug.
6.0.2/3 - Multi user mode and multi user switch fixes.
5.0.0 - Based on G930FXXU1BPJE (9519568)
5.0.1 - You can remove annoying toasts when call connecting. Rom Control - Application settings - Phone.
5.0.3-1 - Enabled WiFi calling (can't test)
4.0.0 - Same as 3.0.11 but based on G930FXXU1BPH6
4.0.1 - Custom background, device info, carrier color in notification area.
4.0.2 - Device info auto update.
4.0.3 - Fixed (?) installation issues when signature verification disabled. It's better, not to disable. Samsung changed package installer. In case of disabled signature check old version will be used.
4.0.4 - Option to hide MSIM panel.
4.1.0 - Multi window control (some applications has issues running in multi window mode) - https://yadi.sk/i/kyzcoEWsv8ztx
4.1.0.3 - Reverted to old Google Package Installer, without "Overlay detected" issue. Removed "Smart block" menu option from settings. Referencing to not existing activity com.android.mms/com.android.mms.spam.HelpActivity, causing crash.
4.1.1/2/3 - Bug fixes, Background and info in notification area can be enabled on lock screen.
4.1.3.1 - Multi windows setting saved on exit from application. Not only on click on "Done".
4.1.4 - Lock screen clock scaling in RC. Workaround for text clock size issues (Next Alarm text & icon invisible or damaged) in some themes.
4.1.5 - Option to hide preferred SIM icon
4.1.6 - Minor fixes. Uploading full file.
4.1.7 - ROM version, time until next alarm, condensed font, scroll long strings in device info.
4.1.8 - Option for fingerprint unlock in ROM Control.
4.1.9 - Optimized package installer mods. Thanks to @Androidwizzard, @sanoc69, @umair. Disable signature check & Enable downgrade settings moved from Aroma to RomControl (please enable after first boot if you need signature check off). Added option to hide IME switch in notification area.
---
3.0.0 - Same as 2.0.23 but based on G930FXXU1BPH6 firmware. Change list 8888212.
3.0.1 - Synchronization with Samsung account fix. You may need give permissions to Samsung Account and somthing like "Private data management" (one that force closing) applications.
3.0.2 - Fixed boot loop with ZTO CSC.
3.0.3 - Fixed vibrate + screen on when listening music and increasing volume if "Safe volume waring" is off.
3.0.4 - Fixed random reboots when connecting power.
3.0.5/6 - More notification area color controls.
3.0.7 - Fixed again "Overlay detected"
3.0.8 - More notification area controls.
3.0.9 - You can hide battery % on status bar, but left on AOD. Better notification color control. Not coloring expanded notifications.
3.0.11 - Fixed SystemUI crash when connecting to VPN
2.0.3:
- Aroma installer. Signature verification, debloat, sound mod, Xposed.
- Jun 2016 security patch
- 1/2 colums in settings
- Battery bar
- Removable Volume panel, power saving mode notifications, grey status bar in "Power saving", low battery notification.
2.0.4 - Weather on lock screen.
2.0.5 - ROM Control updated. Setting for favorits columns number in Settings application. Toolbox in Settings.
2.0.6 - Bug fixes (recommended)
2.0.7 - Quick launch in "recent panel" changes.
2.0.8 - Minor fixes. New Xposed, added ZTO csc & new messages app (full file only, upload will take time) . New quick toggles, new option for "Settings" app in RomControl. Removed Multiwindow from RomControl (use toggle).
2.0.9 - (Minor) Added proper error handling for background image setting in "Quick Launch". Can be done by payed 3minit application. I'm not author of this application.
2.0.10 - Fixed some font size related issues in additions to "Recents" panel.
2.0.15 Many minor fixes. New quick toggles. Removed memory killer from notification screen (it's not a place for killers), it's functionality added to memory bar in "Recents".
Hundreds new options in ROM Control.
2.0.17 - Skip tracks by volume long press.
2.0.21 - Color stuff, torch in PM, secondary symbols on Samsung keyboard, fixes.
Old versions:
---- do not remember
1.1.8 - fixed issue with torch by home & Always on screen mode. Torch by Volume+ returned (unreliable in deep sleep mode).
1.1.9 - New settings in ROM Control for "Restart" button in power menu.
1.1.10 - New "Power menu" settings in Rom Control.
1.1.11 - Select betwwen old and new "Power menu" style. Silent mode toggle in old style.
1.1.17 - Boot to recavery & download blocked if OEM Unlock disabled.
- No kernel signature check (Smart manager do not show security alert).
- Data traffic hidden if S-view cower used
- Full date on lock screen & notification
Solution for "Can't enable private mode" issue:
Method 1:
Use custom kernel.
Method 2:
In Terminal emulator or adb shell type:
su
---Grant permission if asked
restorecon -R /data/system/users
Can I ask, the look of your ROM, is it a theme or is it the Potato Gradient. If not, what is the potato gradient?
Well done! Looks like an awesome rom, will definitely try it out!
JJGLive said:
Can I ask, the look of your ROM, is it a theme or is it the Potato Gradient. If not, what is the potato gradient?
Well done! Looks like an awesome rom, will definitely try it out!
Click to expand...
Click to collapse
Potato gradient - custom status bar background. It included in most of custom ROMs but in this one it may be implicitly disabled.
Try it. There is many things inside that developed by me and not included in any another firmware yet and many old standard things, that completely re-writen and works better, consuming less resources.
d8389 said:
Potato gradient - custom status bar background. It included in most of custom ROMs but in this one it may be implicitly disabled.
Try it. There is many things inside that developed by me and not included in any another firmware yet.
Click to expand...
Click to collapse
Will definitely try your ROM! Thank you!
Tried the rum very much. All works smoothly and nicely.
Just wondering if there is an option to not install next alarm on lock screen. Also do you use Android M boot animation.
Thx
Delivered by my Silver S7.
I see you didnt debloat it since you dont know what apps you need and what not.
Well, what you could do is include a system app removal app (you can find em on the play store) so people can do it theirselves
---------- Post added at 11:30 AM ---------- Previous post was at 11:28 AM ----------
Also, would you like a name 4 your rom?
You could ask people for one if you really want to, and choose on of them, or make a name yourself.
You can call it D8 Rom for example
@d8389
Would you mind sharing your Google *backup* wake lock fix?
mandroid717 said:
Just wondering if there is an option to not install next alarm on lock screen. Also do you use Android M boot animation.
Thx
Delivered by my Silver S7.
Click to expand...
Click to collapse
I'm not going to change boot animations.
Next alarm enable setting added in 1.1.3
kisslorand said:
@d8389
Would you mind sharing your Google *backup* wake lock fix?
Click to expand...
Click to collapse
It seems that wake lock not released on server timeout in stock. See inside services.jar classes.dex/com/android/server/backup
Added wake lock release to 1 or 2 methods handleServerTimeout and its status check before release everywhere.
I must say I prefer the ROM not being debloated, as I really like some of the stock apps.
d8389 said:
It seems that wake lock not released on server timeout in stock. See inside services.jar /com/android/server/backup
Click to expand...
Click to collapse
Thank you very much. That workaround saved the issue I had in the ROM I am using.
JJGLive said:
I must say I prefer the ROM not being debloated, as I really like some of the stock apps.
Click to expand...
Click to collapse
It run good without de-bloating. There is only 1 application, that I keep frozen - Google photo.
Update 1.1.4 released. Changes in quick toggles. Need more testing, so do not delete 1.1.3.
Link to 1.1.4 - in post #2.
Rollback to 1.1.3 - https://yadi.sk/d/oJTa9BwOsotWp
d8389 said:
It run good without de-bloating. There is only 1 application, that I keep frozen - Google photo.
Click to expand...
Click to collapse
I Agree, it runs much better without debloating.
Thank you for an awesome ROM!
I am on bootloader G930FXXU1APF8. Can i just flash this rom?
Erik1805 said:
I am on bootloader G930FXXU1APF8. Can i just flash this rom?
Click to expand...
Click to collapse
This is known issue with Superman.
You should flash stock kernel or stock ROM.
Re-flashing Superman with stock kernel before installing may resolve this.
Try flash this file - https://yadi.sk/d/gumezq2FsqJ8L
d8389 said:
Installation:
No Aroma at this step.
1. Follow instructions for all custom ROM's (you'll find a lot in this forum)
2. After flashing ROM, flash you CSC (before reboot) and updates.
Download:
CSC - https://yadi.sk/d/oT5CcYARsd6hM
ROM - https://yadi.sk/d/H6LIk50CskBYq
Update 1.1.4 - https://yadi.sk/d/guhI4G-xsh2WC
BL & CP APF2 - https://yadi.sk/d/GLHEjgEHskK4d
No wipe data/factory reset needed if you are already on custom.
After wipe date - re-flash SuperSU.
For developers:
Feel free to contact me if you'd like to implement something in your firmware and need help.
Click to expand...
Click to collapse
I can't download the ROM at all.
Trying to click the Download related button. Nothing happens.
Can you use Google Drive or something instead, or fix this issue / bug?
Destroyedbeauty said:
I can't download the ROM at all.
Trying to click the Download related button. Nothing happens.
Can you use Google Drive or something instead, or fix this issue / bug?
Click to expand...
Click to collapse
click twice... It worked for me the second time..
OP:
The rom looks great, only thing I'd like is the option to turn off the ram bar in recents panel.
Also with 1.1.4 update I had several hotboots, which were solved after installing jesse's kernel. Haven't checked if the 1.1.4 zip has a kernel on it, BTW I was coming from Nyssa's rom...
excelent rom! right now I'm testing it, but looks like a daily driver! keep it up!!
arzafran said:
click twice... It worked for me the second time..
OP:
The rom looks great, only thing I'd like is the option to turn off the ram bar in recents panel.
Also with 1.1.4 update I had several hotboots, which were solved after installing jesse's kernel. Haven't checked if the 1.1.4 zip has a kernel on it, BTW I was coming from Nyssa's rom...
excelent rom! right now I'm testing it, but looks like a daily driver! keep it up!!
Click to expand...
Click to collapse
ok.
May be later.
But you should not worry about, because it optimized and consuming less resources, than original one (I don't remember, where it from).
It also start updating when recents open and stop on screen off. So, uou should not worry about battery.
Same or similar happens with all custom components (clocks, battery, traffic etc...). No updates when not visible (if possible). Implicitly stopped when screen is off. If yiu like another ROM, you can ask developers to port my versions of add-ins instead original ones.
1.1.7 released. Added autoruns control to settings. Use carefully.
I'll upload ROM, based on next release from Samsung to another site.
Google drive not showing number of downloads.
You can make mirrors. My internet not fast enough for uploading gigabytes.
AOSP-OMS/Subtratum FOR H30-U10 by Syed Hassan
AOSP+OMS/Substratum is all about new features and looks! This beauty's inner beast gives you high performance at both smoothness and battery backup! Our team is constantly trying to improve this ROM at every aspect! You can except more from this ROM in the future updates!
> What is OMS?
OMS (Overlay Manager Service) which was designed by Sony and its modded by our developers to include it into AOSP ROMs.In short,OMS is a Theme Engine replacement and it can do wonders!
Rom Download Link:
https://www.androidfilehost.com/?fid=745425885120715649
Gapps Included
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
#No need to Flash Boot.img(Separately)
In case of no signals issue, flash an appropriate modemfix from codelover's thread http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773
Code:
> What's working ?
> WiFi
> Weird sounds after flashing gapps fixed
> Phone FC
> Camera + Video Reacording Working Perfectly
> No Need to reboot for apps to apear in app drawer
> Hotspot Fixed
> BT Fixed
> FM fixed
> GPS fixed
> Data working
> 1080p playback in gallery fixed
> youtube 720p fixed
> youtube live playback fixed
> No Sim fixed
> No Network drop found
> USSD Fixed
> Autorotation Fixed
> All sensors working
> After Reboot QuickSetiings Too
Xposed Active
Doby Atmos ADDED
Gravity Box Added
Xinternel Added
> Too many features
> Fixed :-
> camera fixed completely
> no more cam fc after few clicks
> inverted video rec issue fixed
> ril and ussd fixed
> substratum working
[SIZE="6"]Please Hit Thanks button if you like and support my work[/SIZE]
Credit:
Kish Patel
hassanjavaid8181(ME)
ferhung
fire855
AOSP-PRO
[B][U][SIZE="4"][PLAIN]XDA:DevDB Information[/PLAIN][/SIZE][/U][/B]
[SIZE=3][B]AOSP-OMS/Subtratum FOR H30-U10 by Syed Hassan, ROM for the Honor 3C[/B][/SIZE]
[B][U]Contributors[/U][/B]
[URL="https://forum.xda-developers.com/member.php?u=7197160"]hassanjavaid8181[/URL], [URL="https://forum.xda-developers.com/member.php?u=7197160"]hassanjavaid8181[/URL]
[B]ROM OS Version:[/B] 6.0.x Marshmallow
[B]ROM Kernel:[/B] Linux 3.4.x
[B]Based On:[/B] ASOSP
[B][U]Version Information[/U][/B]
[B]Status:[/B] Stable
[B]Created[/B] 2017-03-16
[B]Last Updated[/B] 2017-03-16
ScreenShots:
I've just flashed this rom and it looks amazing, especially with substratum themes. Thanks Hassan ?
oh man another great job!
I'm wondering why in Better Battery Stats app option "WiFi Running" is always about 100% even if I've got it turned off.
Because of it I've got huge battery drain.
Hassan, do you have any idea what to do?
It just caused me a bootloop after applying [Substratum] Galaxy Evolution theme.
Sent from my H30-U10 using Tapatalk
azmin.matshariff said:
It just caused me a bootloop after applying [Substratum] Galaxy Evolution theme.
Click to expand...
Click to collapse
Some substratum themes layers are bad thats why you got boot loop..
For recovering from boot loop use aroma file manager or got to advance and go to file manger then go to data then app and delete Galaxy evolution all layers and restart
Best Rom ever, thanks Hassan
highly recommended
An amazing rom just wow! This is a keeper best i have used ever
anyone can confirm does the VPN bug is finally fixed in this rom? thanks in advance guys
bug found unable to change between 2g/3g stuck on 3g only
Xposed module asks me all time to update. I do it, but the message come back!
sa-mail said:
Xposed module asks me all time to update. I do it, but the message come back!
Click to expand...
Click to collapse
Go to settings, on download section, change the background update interval to "Never". It should be disable the update pop up
---------- Post added at 01:17 AM ---------- Previous post was at 01:16 AM ----------
one more bug is found:
- Switching On / Off the airplane mode is required to activate the mobile data connection
Rayquaza said:
Go to settings, on download section, change the background update interval to "Never". It should be disable the update pop up
---------- Post added at 01:17 AM ---------- Previous post was at 01:16 AM ----------
one more bug is found:
- Switching On / Off the airplane mode is required to activate the mobile data connection
Click to expand...
Click to collapse
- Battery is draining so fast
- Not all Substratum theme is fully compatible with this rom and can cause blank screen or bootloop. Check the compatibility of the themes through the store at Substratum app, it will directly brings to play store and automatically show us the compatibility
hassan bro,
I have a doubt, we have ssl folder in cm12 ROM in the path system/lib but that is not available in RR or any CM13 based ROM's why this difference, can you explain me?
Thanks
good rom
I ask stock FM radio for this rom
thank you
great job bro..
I haven't seen any issues so far...
and i hope vpn bug get fixed very soon.
have problem, when i flash the rom, phone just showing boot and never start up...!
erfanwili said:
have problem, when i flash the rom, phone just showing boot and never start up...!
Click to expand...
Click to collapse
One more time fully wipe cache, unmount system and then flash the ROM.
Hisuite not connecting my mobile, Whta should I do for restoring my backup any solution ?
I tried reinstall HI suite + Huawei Drivers etc.