Related
1080p 60fps recording can be done on our device via Google camera
There are some bugs and force close in Google camera try to switch from front camera video to back camera this will work
https://drive.google.com/file/d/1tfY79SmVjZs-vG0iil41aOOQFur7rFnN/view?usp=drivesdk
60fps+1080p on Moto g4 Plus? that's not possible
siddhesh9146 said:
60fps 1080p on Moto g4 Plus? that's not possible
Click to expand...
Click to collapse
I have screenshot
Aby lad said:
1080p 60fps recording can be done on our device via Google camera
There are some bugs and force close in Google camera try to switch from front camera video to back camera this will work
https://drive.google.com/file/d/1tfY79SmVjZs-vG0iil41aOOQFur7rFnN/view?usp=drivesdk
Click to expand...
Click to collapse
This are screenshot
60fps
Aby lad said:
60fps
Click to expand...
Click to collapse
Thank You!
Works great, I confirm it takes 42fps in dark room, will try tomorrow in the sunlight. A little buggy, but works. It work even better if you switch the video resolution to 720P
Aby lad said:
1080p 60fps recording can be done on our device via Google camera
There are some bugs and force close in Google camera try to switch from front camera video to back camera this will work
https://drive.google.com/file/d/1tfY79SmVjZs-vG0iil41aOOQFur7rFnN/view?usp=drivesdk
Click to expand...
Click to collapse
Nice work! There is a bug when every other shot turns green. Can anyone else confirm this?
reCoded said:
Nice work! There is a bug when every other shot turns green. Can anyone else confirm this?
Click to expand...
Click to collapse
Yes it happens to me too..
Aby lad said:
60fps
Click to expand...
Click to collapse
60fps is just a number, the SOC in moto g4 plus is not capable of handling 1080p+60fps realtime, but yes it can handle lower resolution like 720p or 480p at 60fps;
the FPS counter that you are showing is just 1 frame of image is recorded twice i.e. repeated single frame. more like its 1080i then 1080p which user progressive scan rather then
Interlaced scan. to get this effect done your camera app increases the shutter speed lower the ISO that why we re getting that slightly greenish tint.
Aby lad said:
60fps
Click to expand...
Click to collapse
i smell bull**** there
are you sure that those are actual 60 fps? because i'm pretty sure it's just like that in the ****in meta data of the video.
why my moto g4 plus get freeze a bit meanwhile im takeing picture or recordering on facebook app?
Wont Work...!!
Immediately force closes the camera app...
Is it working on oreo 8.1?
Is not actually "working" anywhere, just a fake.
Hey guys,
I really like the google camera but it seems like I can't get 4k (30fps) video recording up and running. If I switch it on, the camera force closes, no matter what I do or what version I use.)
Right now I am at the latest version of saneklic (2018-07-21; MGCamera_5.1.0.18_R5Plus_v.5.1.17_fix_crash.apk)
I know about the tutorial claiming you need to enable it in some "whyred.xml" which is in a "device feature folder" (a folder somewhere in system/etc/) or something like that, but there is no such thing in a custom rom: it exists only on MIUI. I've already tried every tutorial possible, but nothing helps.
4k is working with the lineage snap, the google camera picture quality is much better though and I really prefere the gcam (because of additional settings/mods)
Thank you very much, any help is very much appreciated. If someone can help me, I will donate you a coffee :highfive:
Marvin
Hey man, I'm really disappointed so far by RN5, I couldn't find a way to record stabilized 4K on custom roms, not even with Open Camera which worked fine on MIUI 10. I have a two year old RN3 which records 4K with gcam (not stabilized) and takes slightly better photos than RN5.
So far i've tried RR, LOS and AEX. 4K recording crashes any camera I've used. Open Camera just gives an error. Waited 2 weeks to unlock bootloader, thinking it will open the gates of heaven. In fact been through hell since I unlocked(yesterday). Antirollback is like a minefield which I luckily avoided, then front camera barely works with gcam, some slight battery drain with custom roms and now 4K recording is broken. Feels like I've downgraded my phone.
Think I'll try to flash MIUI 10, root it, enable camera 2 api for gcam and use Open Camera for EIS enabled 4K. Btw the latest gcam by alone_in_dark works best, even front camera works quite good, try it.
Edit: I flashed MIUI 10, once I enabled camera2 api 4K doesn't work. So it's either 4K or HDR+. Thanks Xiaomi.
Saicoth said:
Hey man, I'm really disappointed so far by RN5, I couldn't find a way to record stabilized 4K on custom roms, not even with Open Camera which worked fine on MIUI 10. I have a two year old RN3 which records 4K with gcam (not stabilized) and takes slightly better photos than RN5.
So far i've tried RR, LOS and AEX. 4K recording crashes any camera I've used. Open Camera just gives an error. Waited 2 weeks to unlock bootloader, thinking it will open the gates of heaven. In fact been through hell since I unlocked(yesterday). Antirollback is like a minefield which I luckily avoided, then front camera barely works with gcam, some slight battery drain with custom roms and now 4K recording is broken. Feels like I've downgraded my phone.
Think I'll try to flash MIUI 10, root it, enable camera 2 api for gcam and use Open Camera for EIS enabled 4K. Btw the latest gcam by alone_in_dark works best, even front camera works quite good, try it.
Click to expand...
Click to collapse
Can you provide link to gcam ? Thanks.
reza6d said:
Can you provide link to gcam ? Thanks.
Click to expand...
Click to collapse
Sure man
Direct download link https://www.celsoazevedo.com/files/android/google-camera/f/CameraX-V2.apk
Edit: For front camera don't use HDR+ enhanced, only HDR+.
Saicoth said:
Sure man
Direct download link https://www.celsoazevedo.com/files/android/google-camera/f/CameraX-V2.apk
Edit: For front camera don't use HRR+ enhanced, only HDR+.
Click to expand...
Click to collapse
Holy grill,its nice thanks.
Didnt expect frontcam to work.But it does.
Saicoth said:
Hey man, I'm really disappointed so far by RN5, I couldn't find a way to record stabilized 4K on custom roms, not even with Open Camera which worked fine on MIUI 10. I have a two year old RN3 which records 4K with gcam (not stabilized) and takes slightly better photos than RN5.
So far i've tried RR, LOS and AEX. 4K recording crashes any camera I've used. Open Camera just gives an error. Waited 2 weeks to unlock bootloader, thinking it will open the gates of heaven. In fact been through hell since I unlocked(yesterday). Antirollback is like a minefield which I luckily avoided, then front camera barely works with gcam, some slight battery drain with custom roms and now 4K recording is broken. Feels like I've downgraded my phone.
Think I'll try to flash MIUI 10, root it, enable camera 2 api for gcam and use Open Camera for EIS enabled 4K. Btw the latest gcam by alone_in_dark works best, even front camera works quite good, try it.
Edit: I flashed MIUI 10, once I enabled camera2 api 4K doesn't work. So it's either 4K or HDR+. Thanks Xiaomi.
Click to expand...
Click to collapse
Thanks for everything! To be honest I prefere much more [email protected] instead of [email protected] I managed to get 4k recordings on lineage snap & open camera no problem. Google camera is where it's at though, I love the settings & mods. I can help you out though if you really want to do 4k recordings ^^
MarvinMe said:
Thanks for everything! To be honest I prefere much more [email protected] instead of [email protected] I managed to get 4k recordings on lineage snap & open camera no problem. Google camera is where it's at though, I love the settings & mods. I can help you out though if you really want to do 4k recordings ^^
Click to expand...
Click to collapse
Can't say no to that. But since 4K (3840 × 2160 resolution) doesn't appear in open camera after enabling camera2 api, I don't think there's a fix for that. It appears only 4000 x 2000 2:1 which gives an error. I did manage to get 4K working with another third party camera, but without EIS. Because RN5 can record 4K with excellent stabilization it's a pitty not to use it. So now if I want to record something I just use another build.prop without cam2.api then reboot, and switch back to enabled cam2.api prop when I want to use HDR+ :laugh:
Saicoth said:
Can't say no to that. But since 4K (3840 × 2160 resolution) doesn't appear in open camera after enabling camera2 api, I don't think there's a fix for that. It appears only 4000 x 2000 2:1 which gives an error. I did manage to get 4K working with another third party camera, but without EIS. Because RN5 can record 4K with excellent stabilization it's a pitty not to use it. So now if I want to record something I just use another build.prop without cam2.api then reboot, and switch back to enabled cam2.api prop when I want to use HDR+ :laugh:
Click to expand...
Click to collapse
This is horrible! I mean is it a firmware issue or some custom rom problem? Unfortuantly I'm not much into mobile software development... I really really want a fix, I would even pay money for it xD :highfive:
Edit_0: If we take a look at this link; a possible solution is shown but it doesn't work... a hotfix would be cool but meh it's alright you can't have it all...
Edit_1: Installing it as a system app doesn't help either btw
4K EIS with camera2 api
MarvinMe said:
This is horrible! I mean is it a firmware issue or some custom rom problem? Unfortuantly I'm not much into mobile software development... I really really want a fix, I would even pay money for it xD :highfive:
Edit_0: If we take a look at this link; a possible solution is shown but it doesn't work... a hotfix would be cool but meh it's alright you can't have it all...
Edit_1: Installing it as a system app doesn't help either btw
Click to expand...
Click to collapse
Hello my friend, it seems you can have it all, I finally found a way to record 4K with EIS while having camera2 api enabled. I'm really happy now and overall satisfied with the phone. Only issue remaining is the front camera HDR+ which is beyond my knowledge, hopefully someone else will come with a fix.
So now, how I managed to record 4K? I'm on MIUI 10 (8.7.12), and using latest blackbox kernel by KunalKene1797. Don't know if these have any effect, but I thought it's good to know.
The third party camera I'm using is Snap Camera, there are certain settings which need to be enabled. I'll post a video with the settings I used and which worked best. 4K Video Support and Use Camera2 API being the most important ones. There could be other settings which could improve the recording, but I like to stay on these stable settings, because I'm pleased with the results so far.
Here's the video with the settings needed in Snap Cam https://youtu.be/gRj9LhYWv5Y(video is back)
Here's the first 4K video https://youtu.be/oQGc4gXnGU0
A test for auto-focus https://youtu.be/V41k21qKQpE
No EIS sample vs EIS https://youtu.be/_qNFNs2gq74 VS https://youtu.be/00J-3cAzLjg
Edit 1: I also tried setting higher bitrate than the default 42, however in windows at the details on the first video it shows 40 total bitrate and when setting to 64 it shows 42, either way it seems the quality was marginally improved. I guess the phone can't write faster than that or the storage doesn't allow it.
https://youtu.be/Q7Lqlr-QanA
Some stuttering can be seen from 0:08 to 0:11, but I think that's because the phone started thermal throttling, it's very hot outside and from all the testing, phone was quite hot too.
I really hope it works for you as well, take care.
Saicoth said:
Hello my friend, it seems you can have it all, I finally found a way to record 4K with EIS while having camera2 api enabled. I'm really happy now and overall satisfied with the phone. Only issue remaining is the front camera HDR+ which is beyond my knowledge, hopefully someone else will come with a fix.
So now, how I managed to record 4K? I'm on MIUI 10 (8.7.12), and using latest blackbox kernel by KunalKene1797. Don't know if these have any effect, but I thought it's good to know.
The third party camera I'm using is Snap Camera, there are certain settings which need to be enabled. I'll post a video with the settings I used and which worked best. 4K Video Support and Use Camera2 API being the most important ones. There could be other settings which could improve the recording, but I like to stay on these stable settings, because I'm pleased with the results so far.
Here's the video with the settings needed in Snap Cam https://youtu.be/gRj9LhYWv5Y
Here's the first 4K video https://youtu.be/oQGc4gXnGU0
A test for auto-focus https://youtu.be/V41k21qKQpE
No EIS sample vs EIS https://youtu.be/_qNFNs2gq74 VS https://youtu.be/00J-3cAzLjg
I really hope it works for you as well, take care.
Click to expand...
Click to collapse
Youtube removed the settings video, can you post it in text here? Or upload the video somewhere else? Thanks! Been looking for a solution to have 4k EIS and camera2 api for a long time since Open Camera didn't work anymore.
jmartinho said:
Youtube removed the settings video, can you post it in text here? Or upload the video somewhere else? Thanks! Been looking for a solution to have 4k EIS and camera2 api for a long time since Open Camera didn't work anymore.
Click to expand...
Click to collapse
Please check back later, I appealed to the decision to remove my video. The video doesn't contain any scam or anything that may violate the community guidelines.
In the mean time I'll make the video available from google photos https://photos.app.goo.gl/AqZHZ9xMn4nSc9pv7
Saicoth said:
Please check back later, I appealed to the decision to remove my video. The video doesn't contain any scam or anything that may violate the community guidelines.
In the mean time I'll make the video available from google photos https://photos.app.goo.gl/AqZHZ9xMn4nSc9pv7
Click to expand...
Click to collapse
That worked great! Thanks!
Am running pixel experience 9.0. I want to use Google camera. Which should I download and how to enable camera2api?
Saicoth said:
Please check back later, I appealed to the decision to remove my video. The video doesn't contain any scam or anything that may violate the community guidelines.
In the mean time I'll make the video available from google photos https://photos.app.goo.gl/AqZHZ9xMn4nSc9pv7
Click to expand...
Click to collapse
Hi! Thanks for all the details. I am using the latest miui 10, and WITHOUT api2 turned on, I used hedge camera app, and the 4k eis was working fine, but phone was droping the frames / stuttering the recorded video, which is a bit annoying.
I tested your setup, and I can see that its better, but still sometimes I can see some dropped frames. It happen to you too?
Thanks in advance for any suggestion.
misiek735 said:
Hi! Thanks for all the details. I am using the latest miui 10, and WITHOUT api2 turned on, I used hedge camera app, and the 4k eis was working fine, but phone was droping the frames / stuttering the recorded video, which is a bit annoying.
I tested your setup, and I can see that its better, but still sometimes I can see some dropped frames. It happen to you too?
Thanks in advance for any suggestion.
Click to expand...
Click to collapse
Yes, it happens to me as well, in the first 8 to 10 seconds, I think it's the cpu, it can't use EIS very well with 4K. Without EIS there are no dropped frames or stutter issues.
A suggestion would be to use a very fast micro sd card, haven't tested, but worth a try.
After about 4-5 minutes the phone gets quite warm and stutter is inevitable due to thermal throttling.
Flash this in TWRP to enable 4k recording in Google camera and other camera2 API-enabled apps
drive.google.com/open?id=1fRX0ASjOnsxbA0XAHOwkV_sz7TCV3dwg
So GCam is definitely the answer for getting the best photo quality out of this phone in almost any situation, but let's see how we can record the best possible video.
Btw, when you first try video recording with the Note 7 in low light, it's natural to be disappointed since you're comparing it to GCam's photo output in low light. GCam uses frame stacking and other techniques to remove noise, increase dynamic range and get details in both shadows and highlights as well as the rest of the image. To produce only one 12-megapixel frame, it uses anywhere from 3 to 15 frames and takes a few seconds to do the complex blending and computations to create a great low light photo. Without a much stronger SoC, ISP, a better sensor and more advanced processing algorithms, this is impossible to do while recording a video, as the phone is struggling to keep up with recording 30 8-megapixel frames (UHD) each second or 2-megapixel frames in case of 1080p. They've barely managed to get SD 660 to comfortably use real-time EIS at 1080p30, along with auto focusing, WB, exposure, noise reduction etc.
So, knowing that in low light this phone's video recording will never be great, let's focus on other aspects of its video recording. My only idea for improving low light video recording is to find an app that can use a high bitrate in order to avoid introducing additional noise and artifacts. This also applies to filming in daylight.
I'll start with some findings about the differences between the stock app, GCam and Open Camera when recording video.
STABILIZATION
As far as video stabilization goes, only stock camera's 1080p30 EIS properly uses gyro-EIS and that really is the most beautiful stabilization you'll get out of this phone. No wobbling or image distortion, it just softens the shakiness, as if the phone were on a gimbal.
1080p30 EIS in GCam – it's instantly noticeable that the viewfinder here is stabilized (whereas in the stock app it isn't). It appears to be using the gyroscope, but not in the same way the stock app does. Stabilization is OK, but not as smooth as in the stock app and wobbliness can be noticed occasionally, with more abrupt movement.
UHD EIS in GCam – better than no stabilization, but wobbliness on the edges tends to be obvious when there's a lot of movement.
1080p30 or UHD EIS in Open Camera – also a stabilized viewfinder, but the stabilization algorithm here is very wobbly, which is extremely noticeable in UHD, so try to hold the phone as stable as possible when recording in Open Camera. The highlight of Open Camera for the Note 7 is its front-facing camera UHD stabilized video recording. So far this is my only use case for Open Camera on this phone (plus testing).
If you like using 1080p60 because of its smoother panning and movement in general, here's a tip to stabilize 60 fps videos: shoot in 1080p60 without EIS in the stock app or another app (using a high bitrate when possible) and then stabilize the footage in Google Photos, which does a nice job unless the video is impossibly shaky.
SLOW MOTION
In my testing, I've never managed to get a smooth slo-mo video out of the stock app and I've tried it after every MIUI update so far. At 1080p or 720p, the result is always a stuttering slo-mo video. GCam to the rescue!
GCam can record stutter-free 1080p slo-mo for a long time (I tried it for a couple minutes) and the resulting video is smooth as butter, suffering only from an occasional hiccup here and there. Perfectly usable.
Open Camera can also record in 1080p120. Different apps should be tried out to see how smooth the slo-mo is and which one is able to use the highest bitrate, leading to the highest image quality. Although image quality does appear to be limited in slow motion mode.
FIELD OF VIEW (FOV)
If you have your phone on a tripod or you can lean on a surface to stabilize it, you should turn EIS off. This will give you a wider field of view and a sharper image. When you're recording a video, the top and bottom portions of the image are cut off to accommodate for the widescreen format. This already makes you lose around 25% of the image information that the sensor can actually see. EIS works by further zooming into the centre of the sensor (or cropping the image) and using the now-extra information to shift the frame in any direction as necessary, to produce an impression of a more stable footage.
The phone will not recognize that it's on a tripod and turn EIS off. You have to do that manually. Why would you want to do that? If you want:
1) to capture more of the scene (a wider field of view), with EIS on, you'll have to step back (which is sometimes not possible)
2) better image: stabilization comes with trade-offs. If you don't need it, turn it off. The phone will be able to use a greater number of pixels to create your fixed-resolution video, resulting in a better image.
With 1080p30 EIS off or UHD without EIS, you'll have the widest FOV possible for video on this sensor. Only top and bottom are cut off for widescreen.
1080p60 EIS off – for some reason, this has just slightly narrower FOV than 1080p30 without EIS. The same FOV appears to be present in 1080p120 (slow motion).
When EIS is on, it crops the least on the stock app, slightly more on GCam and the most on Open Camera.
VIDEO AND AUDIO BITRATES AND QUALITY
Work in progress. So far I can only tell that stock and BSG's GCam produce different videos. Stock uses a higher video bitrate and GCam a higher audio bitrate. Open Camera tends to put on a yellow cast, presumably to make the image warmer. Also, bulkin's GCam allows you to select video bitrate. Haven't played with that or the bitrate in Open Camera.
It's also worth to test other apps, such as Cinema FV-5. I've had luck with that on previous phones.
My recommendation is Open Camera by mark harman
Plzz any one provide me the link
tamalnag said:
Plzz any one provide me the link
Click to expand...
Click to collapse
open camera is on play store
Very detailed observation.. Thanks for sharing. ?
Have anyone tried 'Footej Camera'?
Great post. My recomendation for all uses is gcam, not the best in all but not the worst. Perfect for a daily use
There is a possibility to set the video bit rate in some of the other GCam MODs.
I can recommend this GCam MOD made from developer marlin-ku OR this GCam MOD which have much more valuable options (speed / ISO optimisations) from developer bulkin043. The last version of the second MOD is available in the Telegram channel here.
This port is the best working - one of the few other GCam MODs I'm frequently using on my Redmi Note 7.
have you tried anx camera
Quaresma_7 said:
If you like using 1080p60 because of its smoother panning and movement in general, here's a tip to stabilize 60 fps videos: shoot in 1080p60 without EIS in the stock app or another app (using a high bitrate when possible) and then stabilize the footage in Google Photos, which does a nice job unless the video is impossibly shaky
Click to expand...
Click to collapse
is it is also true for 4k30 ? do you getter final image quality and stabilization if you do eis in google photo as it must be a more complex algorithm vs "eis on" that only must use a simpler faster algorithm that runs in real time
is it hardware accelerated by the snapdragon 660's Spectra 160 ISP or is it software running on the arm cpu (question both for " eis on" and for stabilisation done in google photos app )
amanieux said:
is it is also true for 4k30 ? do you getter final image quality and stabilization if you do eis in google photo as it must be a more complex algorithm vs "eis on" that only must use a simpler faster algorithm that runs in real time
is it hardware accelerated by the snapdragon 660's Spectra 160 ISP or is it software running on the arm cpu (question both for " eis on" and for stabilisation done in google photos app )
Click to expand...
Click to collapse
Google photos stabilization is good, sometimes it does a miracle, but some artifacts appear in the video. It's more aggressive and intelligent than eis on but quality could be not so good. (I don't know anything about which processor is used, but in Google photo is a lot slow the stabilization process, about the double of the video duration)
video quality difference between 4k and 1080p on bsg mod
i installed this gcam mod : https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_6.2.030_RN7_V1a_FINAL.apk but i notice that 1080p and 4k have a completely different look (different WB, different DR) is it due to snapdragon 660 limitations ? is gcam only configuring the hardware capture codec for snapdragon 660 hardware or is it applying some software computation (google proprietary code) on each frame in real time ?
Best video camera app for me is open camera. I do 1080p with 120 fpS with that and it's awesome. Other one is filmic pro. I can shoot flat video and chose nitrate and frame rate.
Cinema f5
My RN7 can't install the GCAM, I've been getting the message "App Not Installed" please any help?
Okusac said:
My RN7 can't install the GCAM, I've been getting the message "App Not Installed" please any help?
Click to expand...
Click to collapse
Uninstall any other previous versions. Then install this
https://drive.google.com/file/d/10OAI7zoNHiBjSmxRGTv2meclafg4nmxV/view?usp=drivesdk
Ryamoz said:
Uninstall any other previous versions. Then install this
https://drive.google.com/file/d/10OAI7zoNHiBjSmxRGTv2meclafg4nmxV/view?usp=drivesdk
Click to expand...
Click to collapse
Okay, I've than that... Thanks
My best is filmic pro. It is dedicated app for video making. U can record in flat/log profile which u then can color grade later on.
The quality is greater than other app.
Open camera is also nice but it has less control over the video. U can't control color temperature and u can't basic color grade ur videos. Plus u can't save ur preset.
I have no luck with GCam and stock one.
Pics GCam, Video Stock
Interesting Thread. On MIUI Global 10.3.6 and now MIUI Global 11.0.4 (Android 9) using GCam PMGC_7.0.009_Astrophoto_Version_V12 overall I'm impressed, activated Sabre and H265/HEVC (edit/play/upload compatibility seems good for the apps I mostly use which paired with the smaller size is good). Not sure if really but crispness/clarity seems well improved as well as less speckles/red-dots especially on the skin in artificial/low light. EIS also still very good.
I also use the stock camera and OpenCamera, so what bothered me in GCam PMGC:
a) still focus flickering in video (can it be optimized by any settings?), stock RN7 camera IMHO has considerably less such flickering?
b) needing GSF: so no CustomROMs? Or is MicroG able to solve this?
c) found no possibility to save to SD-Card DCIM, I think in PMGC V3/V4 versions this still was available?
For OpenCamera while b) und c) are no problem regarding a) there seems to be good micro movement EIS but overall movement/transition is not so smooth; focus seems manual (tapping on-screen) so I could not see flickering . I like OpenCamera for the many settings especially the filename without prefix. It is also possible to set RAW DNG or WebP (I use 4x3k JPG 84%), Exif tags, HEVC, 24 fps, flat/log profile. I wonder why half-max-res pics (2000x1500) are not available to select. For video I would like to have something 16:9 slightly bigger then FHD so like 3K (2560x1440) which is not available (only 4:3). I also can not find timelapse.
A friend has Filmic on RN7. It has pro options and as well HEVC. As i tried once EIS is ok (below stock/GCam) and it seems video focus flickering is noticable just a little more then Stock and GCAM is considerably worse. I do not like the 1/3 screen Play preview of taken videos (just 3 show up) and also the files are not saved in the standard DCIM camera folder on the SD (CMS External Storage, not found by Gallery Apps).
Currently my preference is:
Images: GCam PMGC
Video: RN7 Stock; Timelapses: GCam PMGC
Hi everyone! Back to this topic to ask you a question. After the recent upgrade to Android 10, still with MIUI 11, I've noticed that
- stock camera has video stabilization working "after save"
- gcam (tons of version tried) and opencamera have no more stabilization. Once it was directly on the screen. Now there's any noticable on the screen or offer save.
Do you have the same problem? Thanks! Any way to solve this?
MOTP-EDGBLK - UK Single SIM model.
Finally found a working GCAM Mod - port Nikita.
https://www.celsoazevedo.com/files/android/google-camera/dev-Nikita/
Working: Partial
Tested with NGCam_7.4.104-v1.6 (Nikita, 2020-09-13)
Auxiliary Cams (Wide+Macro)
Slow motion 1/4 and 1/8
Sabre Working
HDR/HDR+, Night Sight and Portrait Mode for BACK CAM and Selfie Cam
Panaroma / photosphere / playground.
Video - upto 4k @30fps / 1080p @60fps
Not Working - update 24th Sep 2020: Ultrawide camera takes blurry pictures with HDR+ on or HDR+ Enhanced on. TURN OFF HDR+ or HDR+ Enhanced to avoid blurry pictures.
Bugs: Selecting 4k video with 60fps setting renders the "video" portion of the app unusable and you cannot revert the setting. The only fix is to clear the app's cache. Seems like a hardware limitation as the Moto EDGE is only capable of recording [email protected]
Attached my custom XML.
Enabled auxiliary cams (wide/macro with icons).
16:9 aspect ratio
Video 1080p @60fps
G-AWB and Sabre Enabled.
Works well thanks!
Better than that dumpster fire, they call Moto camera.
khan1989 said:
MOTP-EDGBLK - UK Single SIM model.
Finally found a working GCAM Mod - port Nikita.
https://www.celsoazevedo.com/files/android/google-camera/dev-Nikita/
Working: Partial
Tested with NGCam_7.4.104-v1.6 (Nikita, 2020-09-13)
Auxiliary Cams (Wide+Macro)
Slow motion 1/4 and 1/8
Sabre Working
HDR/HDR+, Night Sight and Portrait Mode for BACK CAM and Selfie Cam
Panaroma / photosphere / playground.
Video - upto 4k @30fps / 1080p @60fps
Not Working - update 24th Sep 2020: Ultrawide camera takes blurry pictures with HDR+ on or HDR+ Enhanced on. TURN OFF HDR+ or HDR+ Enhanced to avoid blurry pictures.
Bugs: Selecting 4k video with 60fps setting renders the "video" portion of the app unusable and you cannot revert the setting. The only fix is to clear the app's cache. Seems like a hardware limitation as the Moto EDGE is only capable of recording [email protected]
Attached my custom XML.
Enabled auxiliary cams (wide/macro with icons).
16:9 aspect ratio
Video 1080p @60fps
G-AWB and Sabre Enabled.
Click to expand...
Click to collapse
Resend the configs bruh
enzo_cz said:
Resend the configs bruh
Click to expand...
Click to collapse
The original post has the updated XML.
khan1989 said:
The original post has the updated XML.
Click to expand...
Click to collapse
Silly me. Thanks a million
Can't use wide camera. Should I look for another version? Thanks!
The latest version 1.7 works great. With some tweaks to the settings (sorry OP), the wide angle and zoom work perfectly with both regular HDR and HDR enhanced. White balance is pretty good with some modifications and image clarity + sharpness is a lot better.
mikeyek said:
The latest version 1.7 works great. With some tweaks to the settings (sorry OP), the wide angle and zoom work perfectly with both regular HDR and HDR enhanced. White balance is pretty good with some modifications and image clarity + sharpness is a lot better.
Click to expand...
Click to collapse
Mind sending us an xml? Thx
enzo_cz said:
Mind sending us an xml? Thx
Click to expand...
Click to collapse
Might need some better white balancing (I'm colourblind so I struggle with that) but everything else is pretty good. Using the latest Nikita here.
mikeyek said:
Might need some better white balancing (I'm colourblind so I struggle with that) but everything else is pretty good. Using the latest Nikita here.
Click to expand...
Click to collapse
Agreed and thanks a million. Working like a charm. By far the best gcam option for now.
Question. Should the Moto camera tuner be disabled? Could interference from this, distort the results? I have my tuner enabled, would it make a difference?
FYI/PSA: The everything works config posted isn't working in the latest update 1.9, crashes. But app overall seems to be working well. I haven't played with configs too much before, but if I land on something I'm happy with, will share.
Ok, so i will be testing th 1.9 update - any configs which work good with Moto Edge?
Stock camera app dissapointed me so much
Using the version Nikita 2.0, of 104, with configs. Getting better, but is this the final version?
reggjoo said:
Using the version Nikita 2.0, of 104, with configs. Getting better, but is this the final version?
Click to expand...
Click to collapse
which config do you use with Edge?
konradinho16 said:
which config do you use with Edge?
Click to expand...
Click to collapse
NGCam_7.4.104-2.0(Nikita,2020-12-06, configs) Heard, somewhere that this was final.
reggjoo said:
NGCam_7.4.104-2.0(Nikita,2020-12-06, configs) Heard, somewhere that this was final.
Click to expand...
Click to collapse
yes I understand that you use the latest version. But I'm asking about a config (.xml file), that works good with Moto Edge. There are configs for Moto Fusion+, G7 Power etc, but no Edge, so I assume that I need a config that has the same lenses as Edge (64, wide angle, telephoto and TOF).
Can you just show me what config you use, that works so well? Or you have your own? When I download 2.0 and have 3 options below (3X, 1X and 4X)
-3x is probably telephoto
-1x is main lens
-4x is wide angle (?) which just freezes and doesn't work
Anything on advancement? I'm using 8.1 of this app.
Thanks!
All working except Video for me - doesn't matter if i choose 30fps or 60fps, when i go Video is just close the app.
Hello friends, I give you a video that I have made of the problem that I see with this mobile and the autofocus when you record at 60fps, either 1080 or 4k. It takes a long time to focus, or it does not focus directly, and when it works, it does so by jumping quite uncomfortably. in 30 fps everything goes smoothly. Happens to you? thanks!!
video
I can reproduce this on my phone's stock camera, but not as badly as on your video. It seems there's something different about how it chooses to focus when in 60p.
I suspect it's software-related, as when I run 4k 60p on GCAM 8.1 I don't see the issue at all. I'm running MIUI 12.0.9.
chisnz said:
I can reproduce this on my phone's stock camera, but not as badly as on your video. It seems there's something different about how it chooses to focus when in 60p.
I suspect it's software-related, as when I run 4k 60p on GCAM 8.1 I don't see the issue at all. I'm running MIUI 12.0.9.
[/CITAR]
correct friend, when it is at 60fps, the autofocus looks like the one used in photo mode, and is not progressive as in video mode at 30fps. Can you tell me exactly what version of gcam are you using? what xml? I have an operator rom in 12.0.4, I am thinking of putting global, but I have not animated yet.
Click to expand...
Click to collapse
I'm using the newest GCAM 8.1. The main things work, but can't use other lenses at the moment. 4k 60p seems to work ok.
Google Camera by Urnyx05
Google Camera Port by Urnyx05 This is a thread where I share my GCams and you can report me bugs. How to report bugs: If possible, post on a thread for your phone or here if you can't find a thread for your phone. Please describe the issue and...
forum.xda-developers.com
The same dev's 7.3 worked well with all lenses
Urnyx05: GCam_7.3.018_Urnyx05-v2.5.apk
Download GCam_7.3.018_Urnyx05-v2.5.apk by Urnyx05.
www.celsoazevedo.com
.