Develop Bugs

I want to unbrick K30 5G wiht testpoint to edl mode.

I want to unbrick Redmi K30 5G wiht testpoint to edl mode.
Where i can find for Redmi K30 5G testpoint?

How did you brick your device?

Miztory said:
How did you brick your device?
Click to expand...
Click to collapse
Restored the old version Boot image with TWRP

Kanasuke116 said:
I want to unbrick Redmi K30 5G wiht testpoint to edl mode.
Where i can find for Redmi K30 5G testpoint?
Click to expand...
Click to collapse
it seems that downgrade the miui factory rom need to use Mi Flah tool with fastboot rom to do

I want to unbrick K30 5G wiht testpoint to edl mode. me,too.
Kanasuke116 said:
I want to unbrick Redmi K30 5G wiht testpoint to edl mode.
Where i can find for Redmi K30 5G testpoint?
Click to expand...
Click to collapse
How to Flash Redmi K30 5G:
Download Redmi K30 5G Flash File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.
I want to unbrick K30 5G wiht testpoint to edl mode. me,too.

I also brick my K30 5G by restore with TWRP.
I had find the picture of testpoint.
KKL Mobile Service
Redmi K30 5G EDL Testpoint
www.facebook.com
but seems need special account to flash rom.
so i havenot to try and buy EDL cable.
if you success. please teach me.

Hey guys,
Seems I'm not the only one that has bricked his device accidentally xD
In my case, I was flashing an update of xiaomi.eu when the installation failed. I tried rebooting to recovery in order to try again flashing, but I couldn't access my recovery again.
Since then, it boots directly to EDL, without the need to do testpoint.
If anyone wants to manually boot into EDL via testpoint, this video may help you:
(personally, I haven't opened my phone as I don't have the proper tools & experience for that. Even more, do NOT open your device. Otherwise, say "goodbye" to your warranty.)
I see no logo, I cannot reach fastboot nor nothing.
I have tried to flash using MiFlash, and it detects the device!
You have to download a fastboot package, not a recovery package (see mifirm.net).
I've tried with MIUI 12 (both Q and R) fastboot packages and I get weird Sahara errors.
With a MIUI 11 fastboot package, that error is gone. However, I cannot procceed to install as it's forbidden for common users like us to flash our phones in EDL mode. So it says to me that my Mi account is not authorized for this opperation.
My advice (it's what I'm going to do) is to contact to your seller, or directly to Xiaomi, and try to manage the warranty. If you were on MIUI (like me), we should be protected by the warranty. If not, you'll have to finance your reparation.
This turns me off intensely, as EDL should be totally free for us. In my old LG G4, I've flashed in EDL via QFIL many times, and it's not that risky as long as you have the proper files (which we have). In this way, Xiaomi is generating a bad fame & more work to their reparation centers, as we will have to send our hard-bricked phones there.
I've seen also some online services that either sells authorized Mi accounts for EDL, or that log in with a verified Mi account in your PC via TeamViewer to bypass that verification.
Sincerly, I'm not thinking in paying 30$ for something that should me free for us, so I cannot recommend this for now...
I will update my situation in future posts here. Until I get my K30 5G back with live, my development for this device will be stopped.
Good luck to everyone!

masemoel said:
Hey guys,
Seems I'm not the only one that has bricked his device accidentally xD
In my case, I was flashing an update of xiaomi.eu when the installation failed. I tried rebooting to recovery in order to try again flashing, but I couldn't access my recovery again.
Since then, it boots directly to EDL, without the need to do testpoint.
If anyone wants to manually boot into EDL via testpoint, this video may help you:
(personally, I haven't opened my phone as I don't have the proper tools & experience for that. Even more, do NOT open your device. Otherwise, say "goodbye" to your warranty.)
I see no logo, I cannot reach fastboot nor nothing.
I have tried to flash using MiFlash, and it detects the device!
You have to download a fastboot package, not a recovery package (see mifirm.net).
I've tried with MIUI 12 (both Q and R) fastboot packages and I get weird Sahara errors.
With a MIUI 11 fastboot package, that error is gone. However, I cannot procceed to install as it's forbidden for common users like us to flash our phones in EDL mode. So it says to me that my Mi account is not authorized for this opperation.
My advice (it's what I'm going to do) is to contact to your seller, or directly to Xiaomi, and try to manage the warranty. If you were on MIUI (like me), we should be protected by the warranty. If not, you'll have to finance your reparation.
This turns me off intensely, as EDL should be totally free for us. In my old LG G4, I've flashed in EDL via QFIL many times, and it's not that risky as long as you have the proper files (which we have). In this way, Xiaomi is generating a bad fame & more work to their reparation centers, as we will have to send our hard-bricked phones there.
I've seen also some online services that either sells authorized Mi accounts for EDL, or that log in with a verified Mi account in your PC via TeamViewer to bypass that verification.
Sincerly, I'm not thinking in paying 30$ for something that should me free for us, so I cannot recommend this for now...
I will update my situation in future posts here. Until I get my K30 5G back with live, my development for this device will be stopped.
Good luck to everyone!
Click to expand...
Click to collapse
It will ve very interesting to know the outcome of your problem.
It could very possibly be a solution in case any more of us gets stuck in EDL.
¡Buena suerte!

ShinMolina said:
It will ve very interesting to know the outcome of your problem.
It could very possibly be a solution in case any more of us gets stuck in EDL.
¡Buena suerte!
Click to expand...
Click to collapse
Warranty doesn't protect me in Spain as this phone is only sold officially in China...
I could either contact my eBay seller or contact with someone of those authorized EDL accounts.
I finally had to contact a man with an authorized account, and pay my own reparation (25€).
Idk if it's allowed in xda to share the TG nickname of that man as it can be considered as "spam" of a service.
Talk me to TG if you wanna know more details.
But yes guys, we still have a solution to our bricked phones! Mine revived in 15 minutes

masemoel said:
Warranty doesn't protect me in Spain as this phone is only sold officially in China...
I could either contact my eBay seller or contact with someone of those authorized EDL accounts.
I finally had to contact a man with an authorized account, and pay my own reparation (25€).
Idk if it's allowed in xda to share the TG nickname of that man as it can be considered as "spam" of a service.
Talk me to TG if you wanna know more details.
But yes guys, we still have a solution to our bricked phones! Mine revived in 15 minutes
Click to expand...
Click to collapse
Mine is not bricked. I am glad to see that you found a solution for not much money.
We all know the risk we face when buying China only phones, but the price for the performance is always very tempting.

sinmulife said:
it seems that downgrade the miui factory rom need to use Mi Flah tool with fastboot rom to do
Click to expand...
Click to collapse
2.56 MB file on MEGA
mega.nz

Question POCO F3 Bricked, Need assistance plz

Hello,
I was running Arrow OS on my Poco F3 and needed to flash back to Stock Miui Global. while using MiFlash tool I didnt change the default selected “clean and lock” and it bricked my device. Currently it’s stuck on a black screen. It’s detected on MiFlash tool but it’s asking for EDL authorization. can someone assist please ?
Thanks

aravreddy2231 said:
Hello,
I was running Arrow OS on my Poco F3 and needed to flash back to Stock Miui Global. while using MiFlash tool I didnt change the default selected “clean and lock” and it bricked my device. Currently it’s stuck on a black screen. It’s detected on MiFlash tool but it’s asking for EDL authorization. can someone assist please ?
Thanks
Click to expand...
Click to collapse
Sorry to say but thats a hard brick bro. Better take it to a miui service center.

Hold the volume down and power button for ~ 30 secs to see if you can get into fastboot mode.

Nexii801 said:
Hold the volume down and power button for ~ 30 secs to see if you can get into fastboot mode.
Click to expand...
Click to collapse
Doesn’t work
MiFlash tool detects my device but it’s asking for EDL authentication.

ApexPrime said:
Sorry to say but thats a hard brick bro. Better take it to a miui service center.
Click to expand...
Click to collapse
I’m in Canada and I purchased the device from Amazon Spain. We don’t have any service centers in Canada. What would u recommended?

What first rom version of ur phone.? global one.?

oezank said:
What first rom version of ur phone.? global one.?
Click to expand...
Click to collapse
Yes

aravreddy2231 said:
Yes
Click to expand...
Click to collapse
so weird, it must be no problem when u flash back to stock rom, same rom as the first..
and when u buy the phone, bootloader still locked right.?

It asks for an EDL Authorization so that you can flash with locked bootloader.
just a heads up, don't search online for edl authorization account paid service cause its mostly scam.
the nearest service centers would be in the USA, but email here first [email protected]
to ask for the process
Support - Contact us | Xiaomi Global
Contact us through Phone, Email and Online Chat to get Xiaomi support.
www.mi.com
The mistake I see is, you flashed the official global rom with "clean and lock" that means after flashing it factory resets the phone and locks the bootloader. This is a major mistake. Because flashing aren't always successful.
Don't worry Xiaomi is very lenient with it. And the problem occurred on their software.
Next time if you're using mi flash tool, only select "clean all"(sorry I don't have the lastest mi flash tool on me and these are just the old files of my Mi A1. But I do have Poco F3)
edit: after flashing with "clean all" option only, you'll have an unlocked bootloader, and wanted to re-lock the bootloader, you just need to enter "fastboot oem lock" in cmd(in the fastboot+adb file)

for me I never relock my bootloader even if I'm on stock rom, I won't risk the chance that it might brick during OTA and have to send it to service center. Too much of a hassle.

Same.
I've had Mi Pad 4 for 3 years now and can't even count how many times I flashed it with Xiaomi.EU, back to stock and then Pixel Experience.
Never a problem simply because I never tried or had a need to relock the bootloader.
I don't know why so many people have been posting bricked devices in this forum lately, do people not know how to read.
Sorry for being blunt, but on a device worth $500 Canadian I would think people would take proper precaution and read on procedure
details before flashing any rom custom or stock.

I really do not understand too much why these issues occurs.
When you exec flash_all script, the bootloader relock is executed the last instruction of the process, and only if all the images flash ends successfull

Ended up paying $30 for a EDL account and he fixed my device.

Maybe some interested on know where you have buy the EDL account

bartito said:
Maybe some interested on know where you have buy the EDL account
Click to expand...
Click to collapse
I found a person on YouTube, joined his telegram group and he assisted me with screen share. He had EDL authorization.

Perfect

aravreddy2231 said:
Ended up paying $30 for a EDL account and he fixed my device.
Click to expand...
Click to collapse
good to hear it

Same. Good to heart it, be more careful next time bro.

aravreddy2231 said:
I found a person on YouTube, joined his telegram group and he assisted me with screen share. He had EDL authorization.
Click to expand...
Click to collapse
my phone is bricked please pass me the contact

Text this person on telegram messenger- @mi_auth_official

Question Realme X7 Pro Soft Bricked (Goes directly into bootloader and does nothing)

Hey guys,
I recently bought a Realme X7 Pro from Alibaba and the seller seemed to have unlocked the bootloader and installed a custom rom on it. This was nice with regards to having no bloatware, but my banking apps, Widevine L1 and software updates didn't work anymore. I asked the seller, and he said I can install OTA updates. Last night, I decided to do just that. I factory reset my phone, and went into recovery mode with 'adb reboot recovery'. After flashing the stock rom, it is stuck on the "Orange state. Phone is unlocked. Phone will boot in 5 seconds" screen.
I have tried every possible combination of volume up, down and power keys, but nothing seems to be working. It seems to go directly into the bootloader on start-up. On adb, it shows the device, but it is unauthorized (because of the factory reset), so no help from that. Fastboot also doesn't pick up the device.
I have also tried SP Flash Tool and Realme Flash Tool, but with no success. Currently I have made a dispute on Alibaba, because the seller never said anything about the phone being unlocked.
Any help would be appreciated.

I have the same problem,tell me if you find the cure for it please.

[email protected] said:
I have the same problem,tell me if you find the cure for it please.
Click to expand...
Click to collapse
Hey man. It is possible to fix it from this. I am assuming you installed a rom that is not meant for the phone (indian on china). I will send you a video on how to put the phone in EDL mode.
You will need to use SP Flash Tool (the tutorial shows how).
INCREDIBLY IMPORTANT
DO NOT FORMAT THE DEVICE. SP Flash Tool makes it way to easy to mess everything up. Follow the tutorial exactly.
Do you Chinese or Indian model?

If Realme 7 Pro is a Qualcom chipset, how can you use mediatek SPTool?
Sorry, wrong forum for me.
Please delete

ppthom said:
If Realme 7 Pro is a Qualcom chipset, how can you use mediatek SPTool?
Sorry, wrong forum for me.
Please delete
Click to expand...
Click to collapse

Question OnePlus 11 Unlock bootloader/msm tool/custom rom

Hello brothers!
I'd like to know more about unlock bootloader, msm tool and about custom rom.
Does oneplus give us the ability to unlock the bootloader?
Is it possible to create a msm tool for it? I know that oneplus 10 pro had a problem with it...
As a oneplus 8/8 pro, 6T, op5, op3 and op1 user I always liked the fact that these were perfect phones for development. oneplus gives us such an opportunity at all now? My question is because I haven't seen it on op10pro...
I hope someone can answer these questions and we can talk about it together.
Best regards zelos156 aka zeusgod

Msm is dead since oppo took over oneplus

toolhas4degrees said:
Msm is dead since oppo took over oneplus
Click to expand...
Click to collapse
I thought they found a workaround for msm tool in the coding I may be wrong

scottlam1 said:
I thought they found a workaround for msm tool in the coding I may be wrong
Click to expand...
Click to collapse
No
There is fastboot enhanced which doesn't save you if you hard brick and can't get into fastboot flashing mode(not stock bootloader). Chinese users say there is a flash tool but nothing has surfaced yet. A dev who was trying to make it work for a cease and desist message from oppo

Oh that's stinks msm was a godsend for me because of the readback function built in to pull stock boot image for magisk

I bricked my OP11 and desperately need MSM : (
BL is locked, it stuck in a bootloop to recovery mode
PC can't detect the phone.
I couldn't get back to FASTBOOT with pressing physical key. Please help!

i had same issue, try disconnecting the cable then turn on while pressing all keys, somehow i got to fastboot,
am there at moment trying to figure out next
kwokchun said:
I bricked my OP11 and desperately need MSM : (
BL is locked, it stuck in a bootloop to recovery mode
PC can't detect the phone.
I couldn't get back to FASTBOOT with pressing physical key. Please help!
Click to expand...
Click to collapse

Danz17 said:
i had same issue, try disconnecting the cable then turn on while pressing all keys, somehow i got to fastboot,
am there at moment trying to figure out next
Click to expand...
Click to collapse
Thanks for sharing, I definitely need to try that! Did you press all keys and hold, or just press randomly?

So I can't get the drivers to recognize the device. OP does not have the 11 listed in the drivers download page. Are there other drivers that work?
**UPDATE** Disregard. Figured it out.

if you can access 9008 mode then you can recover It
kwokchun said:
I bricked my OP11 and desperately need MSM : (
BL is locked, it stuck in a bootloop to recovery mode
PC can't detect the phone.
I couldn't get back to FASTBOOT with pressing physical key. Please help!
Click to expand...
Click to collapse

Daniha said:
if you can access 9008 mode then you can recover It
Click to expand...
Click to collapse
Can you please tell how? My phone was stuck at EDL mode. I couldn't find any guide on how to recover and for some reason, QLMFlasherTrial was not opening in my PC. I have my phone to service centre for repair and still waiting.

Is there a link someone could share for unlocking bootloader or perhaps the payload dump method?

treetolber said:
Is there a link someone could share for unlocking bootloader or perhaps the payload dump method?
Click to expand...
Click to collapse
Root permissions guide for OP11 EU (2449) & backup partition "Persist.img"
You do everything you do according to this guide only at your own responsibility. There were a lot of contradictory and various complications during the process of rooting the new OnePlus 11 model. The process described below was performed on my...
forum.xda-developers.com

qriozum said:
Root permissions guide for OP11 EU (2449) & backup partition "Persist.img"
You do everything you do according to this guide only at your own responsibility. There were a lot of contradictory and various complications during the process of rooting the new OnePlus 11 model. The process described below was performed on my...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks. I don't have the EU variant though. CPH2451 A.07

{Mod edit: Quoted post has been deleted. Oswald Boelcke, Senior Moderator}
{Mod edit}. currently my device is hardbrick. tried to run using msm tool with oppo's account but flashing stops at 3% after "authentication" and gives error "sw mismatch"

zelos156 said:
Hello brothers!
I'd like to know more about unlock bootloader, msm tool and about custom rom.
Does oneplus give us the ability to unlock the bootloader?
Is it possible to create a msm tool for it? I know that oneplus 10 pro had a problem with it...
As a oneplus 8/8 pro, 6T, op5, op3 and op1 user I always liked the fact that these were perfect phones for development. oneplus gives us such an opportunity at all now? My question is because I haven't seen it on op10pro...
I hope someone can answer these questions and we can talk about it together.
Best regards zelos156 aka zeusgod
Click to expand...
Click to collapse
Qualcomm has a git for this
Linaro Git Hosting
git.linaro.org
You're scroll down until you see "landing-teams"
Just click on it and it will expand then just look
"Working/Qualcomm" and all of them are for Qualcomm devices/software.

surajpai524 said:
Can you please tell how? My phone was stuck at EDL mode. I couldn't find any guide on how to recover and for some reason, QLMFlasherTrial was not opening in my PC. I have my phone to service centre for repair and still waiting.
Click to expand...
Click to collapse
Update: I went to service centre in India to fix my bricked OnePlus 11. Service centre didn't have enough software yet to fix. Also My device was the first device registered to be fixed. So I'm getting a replacement of the device.

Just fastboot flashing unlock
treetolber said:
Is there a link someone could share for unlocking bootloader or perhaps the payload dump method?
Click to expand...
Click to collapse

Namhoang05 said:
Help me contact that person. currently my device is hardbrick. tried to run using msm tool with oppo's account but flashing stops at 3% after "authentication" and gives error "sw mismatch"
Click to expand...
Click to collapse
did you try to flash oos via edl or did you try to flash the firmware that was on the cell phone via edl? (if that is a china op11 you should flash coloros by edl with the tool if you have an AUTH. for the tool

str8str said:
Just fastboot flashing unlock
Click to expand...
Click to collapse
That didn't work when I tried. Actually I tried fastboot oem unlock. That's still the correct phrase right?

Question Oneplus 11 Unbrick

I recently got a OnePlus 11 and managed to brick it already. IT only flashes partial screen when connected to power. Can not connect to laptop to fix. Can someone help me fix my OnePlus

Without telling us what you did that led up to this disaster, how can anyone help you fix this. Second we need to know what model of op11 you have to see what can be done. Third since this is ab device in bootloader mode, you could switch slot to at least have phone maybe working.

LilBigTone said:
I recently got a OnePlus 11 and managed to brick it already. IT only flashes partial screen when connected to power. Can not connect to laptop to fix. Can someone help me fix my OnePlus
Click to expand...
Click to collapse
you can it only self unbrick when you can boot to fastboot and fastbootd, when the op11 only boots to edl ( look in your windows drive manager ) than you can`t unbick self

MrSteelX said:
Without telling us what you did that led up to this disaster, how can anyone help you fix this. Second we need to know what model of op11 you have to see what can be done. Third since this is ab device in bootloader mode, you could switch slot to at least have phone maybe working.
Click to expand...
Click to collapse
so that he can switch to the other slot with the op11 (virual from devices) he should be able to boot into fastboot (I haven't managed to boot into fastboot with my eu op11 with a key combo yet)

I'm not sure which op11 but I believe it's the Unlocked American. Events- I was bs-ing around after unlocking bootloader. I read someone said they rooted with .... they proceeded to supply boot.img, etc.. I tried to flash it and thus began My situation. It didn't work and the device wouldn't boot pass splash screen. (Bootloop) now it only blinks on bottom quarter or screen whe. Power is attached to device. But isn't recognized by laptop when connected with Original cord in any drivers.

LilBigTone said:
I recently got a OnePlus 11 and managed to brick it already. IT only flashes partial screen when connected to power. Can not connect to laptop to fix. Can someone help me fix my OnePlus
Click to expand...
Click to collapse
You have to flash it using MSM tool, There is No free tool available for this device, so ask oneplus support for remote assist or dm me

LilBigTone said:
I'm not sure which op11 but I believe it's the Unlocked American. Events- I was bs-ing around after unlocking bootloader. I read someone said they rooted with .... they proceeded to supply boot.img, etc.. I tried to flash it and thus began My situation. It didn't work and the device wouldn't boot pass splash screen. (Bootloop) now it only blinks on bottom quarter or screen whe. Power is attached to device. But isn't recognized by laptop when connected with Original cord in any driver
Click to expand...
Click to collapse
The op11 you need init_boot.img for rooting not the boot.ing
You can it only fix with msm tool (remoute because there is no free msm solution')

LilBigTone said:
I'm not sure which op11 but I believe it's the Unlocked American. Events- I was bs-ing around after unlocking bootloader. I read someone said they rooted with .... they proceeded to supply boot.img, etc.. I tried to flash it and thus began My situation. It didn't work and the device wouldn't boot pass splash screen. (Bootloop) now it only blinks on bottom quarter or screen whe. Power is attached to device. But isn't recognized by laptop when connected with Original cord in any drivers.
Click to expand...
Click to collapse
Without knowing what model you have, how did you think this was going to workout. There are 5 different software versions for op11. They all have different methods to root and different ways to recover.

MrSteelX said:
Without knowing what model you have, how did you think this was going to workout. There are 5 different software versions for op11. They all have different methods to root and different ways to recover.
Click to expand...
Click to collapse
All version you root with init_boot.img

ChrisFeiveel84 said:
All version you root with init_boot.img
Click to expand...
Click to collapse
Not true for na version

MrSteelX said:
Not true for na version
Click to expand...
Click to collapse
Is treu you boot with kernelsu and after this you patch init_boot.img (or flash magisk to aktive slot ) and now is init boot patched . On us model (rom)
And india, china, global/eu you can direkt use the init_boot.img from full firmware pack and patch it with magsik and flash it .
Init_boot.img is the ram disc
Than the ram disc is no longer in boot.img on devices with a13
Generische Boot-Partition | Android Open Source Project
source.android.com

ChrisFeiveel84 said:
Is treu you boot with kernelsu and after this you patch init_boot.img (or flash magisk to aktive slot ) and now is init boot patched . On us model (rom)
And india, china, global/eu you can direkt use the init_boot.img from full firmware pack and patch it with magsik and flash it .
Click to expand...
Click to collapse
What model does op have?

MrSteelX said:
What model does op have?
Click to expand...
Click to collapse
Op11 have android13 and use init_boot.img
Or what you mens ?
(Op11r have no init_boot.img on op11r is the ram disc in boot.img)

ChrisFeiveel84 said:
Op11 have android13 and use init_boot.img
Or what you mens ?
(Op11r have no init_boot.img on op11r is the ram disc in boot.img)
Click to expand...
Click to collapse
What model does LilBigTone have since the point of this thread is to help him fix phone. Without that information, all advice we give is useless to him. He also stated that he flash some boot.img for what device we don't know.

MrSteelX said:
What model does LilBigTone have since the point of this thread is to help him fix phone. Without that information, all advice we give is useless to him. He also stated that he flash some boot.img for what device we don't know.
Click to expand...
Click to collapse
This is here for op11 and when he have flashed a patched boot.img he have bricked his devices with this (when he use magisk patched Boot.img the op11 will no longer Boot to system)
Only kernelSU works with boot.img for booting in the system (temp root) and after this you go to magisk and flash magisk to aktive slot (now is init_boot patched)

@LilBigTone
1. Before doing anything, you should know ALL details of your phone first. This includes both hardware info and software info.
2. You shouldn't flash random files you find on the internet, especially if it isn't a test device.

I'm not the OP but am looking to use the MSM tool to fix my OnePlus 11.
I have the MSM tool, do I need the ops file from OnePlus?

Have you tried holding power + volume up (or down, idk remember) while the device is starting to get into the bootloader?

I can't get into fastboot anymore (Volume Down while booting) but can get into EDL.

asheroto said:
I can't get into fastboot anymore (Volume Down while booting) but can get into EDL.
Click to expand...
Click to collapse
Can you get into recovery which then you could have it boot to bootloader?