Related
Screen calibrator 1.2 (LG G2)
Tune your own R G B settings
works on:
dorimanx kernel
bruce2728 kernel
cloudyfa's kernel
and as reported some aosp/cm roms with apropriate kernels.
Please thank to the kernel devs for adding the support
Also tested on some other kernel and settings didn't stick.
Credits: @xanthrax @Slimer777 for hints, informations.
Also, please see Slimer777's guide/thread about right settings.
OLD Changes:
1.0 - initial release
1.1 - added +/- buttons, little bit larger sliders
The app will autoexit on reboot(after profile loading)
The app will also autoexit on app start (you've got 5 seconds to tap anywhere to stop it), it will autoexit only if the profile is set.
To prevent exiting and to set new profile just TAP anywhere (not on controls), anywhere on the interface.
- links are removed, new version doesn't require the app to be installed after applying the settings.
Click to expand...
Click to collapse
changelog for 1.2
+ added default profile
+ added recommended profile (recommended for LG G2)
+ added init.d support
- removed app autostart on boot
- removed app terminate on profile apply
DOWNLOAD
Link for v1.2
md5: 26bae44a5e5e9d8161087d50ae54e408
Yes
Sent from my LG-LS980 using Tapatalk
bender_007 - Taking the phrase "there's an app for that" to the next level and makes it real.
Thanks for it!
Great
Added next version Pardus :good:
WOW! this is awesome buddy!
ill make a nice folder in my Homescreen with all your apps!!! =)
Maybe this could be implemented like a tab in Stweaks? Thats would be LEGEND....wait for it.....DARY! =)
best settings to be close to 6500 K ?
it would be cool if we could change gamma values too
szabyka95 said:
best settings to be close to 6500 K ?
it would be cool if we could change gamma values too
Click to expand...
Click to collapse
For best settings you can see here
I'll add gamma, too(it was in preparation already )
bender_007 said:
For best settings you can see here
I'll add gamma, too(it was in preparation already )
Click to expand...
Click to collapse
you should add that link to OP !
waiting for gamma too ! +1
Will this work for rooted Verizon LG G2? I just want to get the screen temp right. I have a spyder4pro I use to calibrate my displays. I wish I could do a full calibration on this screen!
Very nice bender :laugh: . U'r the best
th3b3 said:
Will this work for rooted Verizon LG G2? I just want to get the screen temp right. I have a spyder4pro I use to calibrate my displays. I wish I could do a full calibration on this screen!
Click to expand...
Click to collapse
It should work. Please try and tell. You don't lose anything
bender_007 said:
It should work. Please try and tell. You don't lose anything
Click to expand...
Click to collapse
I have to wait till next week when I get my new G2 :laugh: Just excited and want to be ready to start when I get it!
Ah, next week. Until next week who knows how many apps I build :good:
Great job mate, lets see what can be added more
Sent from my Darkside of LG G2
1st of all - thanks... :thumbup:
few u/i suggestions:
1. can you make the sliders bigger (wider)?
2. maybe adding - and + buttons (left/right of the sliders) that change the value by 1 step down or up
3. app opens after reboot, applies the settings and stays open until i close it manually (is this normal or a bug?)
if you need a graphic layout for the app - you know where to find me
Thnx you
Applied this settings and whites are now white.
60nine said:
1st of all - thanks... :thumbup:
few u/i suggestions:
1. can you make the sliders bigger (wider)?
2. maybe adding - and + buttons (left/right of the sliders) that change the value by 1 step down or up
3. app opens after reboot, applies the settings and stays open until i close it manually (is this normal or a bug?)
if you need a graphic layout for the app - you know where to find me
Click to expand...
Click to collapse
1. Yap, no problem
2. Also
3. This one was tricky. What if you want new settings? I can make a countdown or something.
Sent from my LG-D802 using Tapatalk
I flashed the latest dorimanx kernel, the settings stick after
That's great!
Sent from my Darkside of LG G2
bender_007 said:
3. This one was tricky. What if you want new settings? I can make a countdown or something.
Click to expand...
Click to collapse
why would i want new settings if i didn't reboot because of this tool?
your tool changes settings on the fly and without asking for a reboot...
so, if after the reebot i decide to change something, i'll open the app myself... makes sense?
Wow, haven't checked-in for a week and now there is an app for it! Great Job. Did you find any other display parameters while you were building this app?:good::good::good:
Use System App remover (root) tool to remove bloatware off Tmobile phones! Make sure you backup your files and data using titanium backup or your favorite backup app! Lets help the new guys have a better chance at not bricking their phones. And support these developers by buying the full versions of their apps! Remember to be careful! Especially when deleting programs off your phone!
Apps:
Awesome backup app for rooted phone
Titanium backup:
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup
Lg g3 tweak program
G3 tweaksbox:
https://play.google.com/store/apps/details?id=it.ptoti.g3_tweaksbox
Xposed
Needed for tweaksbox
http://repo.xposed.info/module/de.robv.android.xposed.installer
Explorer:
https://play.google.com/store/apps/details?id=com.speedsoftware.explorer
System App Remover(root):
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en
Greenify helps control app battery hogs:
https://play.google.com/store/apps/details?id=com.oasisfeng.greenify
Tips:
Some ways to reduce lag:
Turn ART on. You need to turn on the developer option feature. ART will load apps faster and save battery life. The version on KitKat is in beta, but I havent had any issues.
To turn on developer option:
1. On your Android phone head over to Settings->About Phone.
2. Now scroll down to Software Information and tap.
3. Next, scroll down and tap the Build Number for about 7 times, and a popup message will tell you 1. that Developers Options has been enabled on your Phone.
To Turn ART on:
1. Head to Settings-> Developer Options.
2. Tap on Select Runtime.
3. Select Use ART.
4. The phone will reboot and optimize your programs then you'll be good to go.
Another tip to fix lag:
1. Head to Settings-> Developer Options.
2. Scroll Down to Transition animation scale and tap it.
3. Select Animation scale .5
4. Select Transition animation scale and tap it.
5. Select Animation scale .5.
6. Select Animator duration scale and tap it.
7. Select Animation Scale .5
This Should Help speed things up. Another option is to replace the stock lg launcher. I personally use Nova Launcher Prime(paid version).
This is a link to the free version which is very good.
Nova Launcher:
https://play.google.com/store/apps/details?id=com.teslacoilsw.launcher&hl=en
How to run any app in dual window:
First you need to have a rooted phone.
download Build Prop Editor
https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor&hl=en
open the app and go to persist.splitwindow.support_all
tap on it and change the value to true, tap save and then reboot. Now you can choose whatever apps you want in dual window.
Nice to know what people are doing to get rid of the lag?
dspcap said:
Nice to know what people are doing to get rid of the lag?
Click to expand...
Click to collapse
my phone came lagfree right straight out of the box
dspcap said:
Nice to know what people are doing to get rid of the lag?
Click to expand...
Click to collapse
No lag here brotha
Guys, thanks for the posts of no lag, but we are completely loosing track of the original OP.
No Root Explorer?
dspcap said:
Nice to know what people are doing to get rid of the lag?
Click to expand...
Click to collapse
I'll post some stuff under tips tomorrow that'll help speed up your phone.
dspcap said:
Guys, thanks for the posts of no lag, but we are completely loosing track of the original OP.
Click to expand...
Click to collapse
I updated the tips section with some stuff you can consider to reduce the lag on your phone.
aclegg2011 said:
I updated the tips section with some stuff you can consider to reduce the lag on your phone.
Click to expand...
Click to collapse
I have animation off, never really cared for it. With nova launcher, do you lose knock to turn the phone off and knock to turn the phone on? I love Nova, but really like the on and off.
dspcap said:
I have animation off, never really cared for it. With nova launcher, do you lose knock to turn the phone off and knock to turn the phone on? I love Nova, but really like the on and off.
Click to expand...
Click to collapse
You do, but you can get it back. Download this
https://play.google.com/store/apps/details?id=com.katecca.screenofflock
Then go to nova settings. Then go to gestures and buttons. Find double tap. Tap on it then select the program you downloaded. Youll have knock on and off back.
Sent from my LG-D851 using XDA Free mobile app
Added more tips guys! Check it out. And if you guys have any good tips and good programs post them here. Lets help each other out.
Lag? What lag?
worldwidepmp said:
Lag? What lag?
Click to expand...
Click to collapse
I assume you are saying you don't have any lag?
dspcap said:
I assume you are saying you don't have any lag?
Click to expand...
Click to collapse
You assume correctly. No noticeable lag since day 1.
worldwidepmp said:
You assume correctly. No noticeable lag since day 1.
Click to expand...
Click to collapse
So then why troll threads bragging when some people are obviously having trouble.
dspcap said:
So then why troll threads bragging when some people are obviously having trouble.
Click to expand...
Click to collapse
Get a life. I'm not bothering you.
worldwidepmp said:
Get a life. I'm not bothering you.
Click to expand...
Click to collapse
I've had some lag and find this thread useful, so your post is bothering me. Your trolling.
dspcap said:
I've had some lag and find this thread useful, so your post is bothering me. Your trolling.
Click to expand...
Click to collapse
Then fix your lag instead of worrying about my "trolling".
dspcap said:
I've had some lag and find this thread useful, so your post is bothering me. Your trolling.
Click to expand...
Click to collapse
Easy guys...lag bothers some more than others. ART goes a long way as does debloating and greenifying, launchers and animations to 0, FPS tweaks...all affect lag perception.
Sent from my amazing LGG3!
wideasleep1 said:
Easy guys...lag bothers some more than others. ART goes a long way as does debloating and greenifying, launchers and animations to 0, FPS tweaks...all affect lag perception.
Sent from my amazing LGG3!
Click to expand...
Click to collapse
I fixed my lag, but not all have. We need to support the community.
Hi there,
if anyone has nice color profiles please share.
I'm liking these settings, still playing around but looks better than stock in my opinion.
clothednblack said:
I'm liking these settings, still playing around but looks better than stock in my opinion.
Click to expand...
Click to collapse
I use your settings.they look nicely.thx for that
Sorry for the ignorance... But how can I get to that settings??
Thanks...
clothednblack said:
I'm liking these settings, still playing around but looks better than stock in my opinion.
Click to expand...
Click to collapse
What app is this from? I'd love to tweak the colours on my 2 XL!
wingsfortheirsmiles said:
What app is this from? I'd love to tweak the colours on my 2 XL!
Click to expand...
Click to collapse
Its ex kernel manager
pa.pn2 said:
Its ex kernel manager
Click to expand...
Click to collapse
Only rooted pixels ?
RealCaracas said:
Only rooted pixels ?
Click to expand...
Click to collapse
Yes
Can't get to stick the config, if I exit the app, when enter again, the values are default again.
I'm on flash kernel.
the value doesn't get applied every time i reboot.
have to go to EXKM again everytime.
GIKE said:
Can't get to stick the config, if I exit the app, when enter again, the values are default again.
I'm on flash kernel.
Click to expand...
Click to collapse
bradputt said:
the value doesn't get applied every time i reboot.
have to go to EXKM again everytime.
Click to expand...
Click to collapse
Did you toggle the "apply on boot" at the top? I be rebooted several times and it's still set to the settings I put it at.
clothednblack said:
Did you toggle the "apply on boot" at the top? I be rebooted several times and it's still set to the settings I put it at.
Click to expand...
Click to collapse
it happens when exit the app, without reboot, and yes, the apply on boot it's ticked
clothednblack said:
Did you toggle the "apply on boot" at the top? I be rebooted several times and it's still set to the settings I put it at.
Click to expand...
Click to collapse
yeah "apply on boot" is enabled.
the numbers stick, but the colors doesn't change after reboot until you go EXKM app and open the color settings page.
GIKE said:
it happens when exit the app, without reboot, and yes, the apply on boot it's ticked
Click to expand...
Click to collapse
Strange, no other kernel modification app installed? Maybe try a different one.
bradputt said:
yeah "apply on boot" is enabled.
the numbers stick, but the colors doesn't change after reboot until you go EXKM app and open the color settings page.
Click to expand...
Click to collapse
I know the kernel app takes a few seconds to apply after a reboot but never really watched to see how long.
---------- Post added at 07:10 PM ---------- Previous post was at 07:07 PM ----------
Try this, go into ex manager/apply on boot delay and change it to 10 seconds. This gives everything else time to boot up before ex takes over.
clothednblack said:
Strange, no other kernel modification app installed? Maybe try a different one.
Click to expand...
Click to collapse
With kernel adiutor sticks, thanks for the suggestion.
GIKE said:
Can't get to stick the config, if I exit the app, when enter again, the values are default again.
I'm on flash kernel.
Click to expand...
Click to collapse
bradputt said:
the value doesn't get applied every time i reboot.
have to go to EXKM again everytime.
Click to expand...
Click to collapse
But you both use the switch in the upper right to keep it after booting?
GIKE said:
With kernel adiutor sticks, thanks for the suggestion.
Click to expand...
Click to collapse
tried kernel auditor, yeah it works after rebooting. but it gives me constant notification sounds during start.
clothednblack said:
Strange, no other kernel modification app installed? Maybe try a different one.
I know the kernel app takes a few seconds to apply after a reboot but never really watched to see how long.
---------- Post added at 07:10 PM ---------- Previous post was at 07:07 PM ----------
Try this, go into ex manager/apply on boot delay and change it to 10 seconds. This gives everything else time to boot up before ex takes over.
Click to expand...
Click to collapse
10,20, 30 secs all cannot work.
pa.pn2 said:
But you both use the switch in the upper right to keep it after booting?
Click to expand...
Click to collapse
yes, i confirm it's enabled.
now i changed to kernel auditor and removed the app notification rights, everything is good after reboots.
thanks for all the advices!
Thats my Personal Profile pretty good in boosting colors in every section
Pls Set Ur Display to saturated before using this Profile to get the best effect
Have you guys been able to resolve black crush and dried blood reds on the natural/boosted calibration? I don't want to use the oversaturated mode.
I've been playing around with values, but can't get the whites to be actually white.
It goes back and forth between yellow and blue hue. Anybody find a good profile yet?
it is possible with a modification or app to use all the apps in maximum energy saving mode?
Swipe down twice, touch the down-arrow beside 'Power Saving', and select 'Max'". You can customize what 'Max' means.
ryebuck said:
Swipe down twice, touch the down-arrow beside 'Power Saving', and select 'Max'". You can customize what 'Max' means.
Click to expand...
Click to collapse
you can costumise a few things but you cant use all apps
AntoKemz said:
it is possible with a modification or app to use all the apps in maximum energy saving mode?
Click to expand...
Click to collapse
Maybe you are looking for Greenify, that's the best out there.
sheepkill15 said:
Maybe you are looking for Greenify, that's the best out there.
Click to expand...
Click to collapse
You did not understand any of the 3 actually , I meant to use all the applications that would normally be limited by the system when it is in powersave mode. In the end I managed, just move the apps that interest us in the system.
AntoKemz said:
it is possible with a modification or app to use all the apps in maximum energy saving mode?
Click to expand...
Click to collapse
In my galaxy S5
it was an tool doing that in rooted devices
bit i did not remeber the name
Warning :-
I AM NOT RESPONSIBLE FOR ANY DAMAGE WHATSOEVER YOU MAY CAUSE TO YOUR DEVICE WHILE USING OR RANDOMLY EXPERIMENTING WITH THIS FIX, DONT TINKER WITH DEVICE IF U DONT KNOW WHAT U R DOING.
Q. WHAT THIS APP IS FOR ?
A. This app provides charging limit feature for f3 on any rom be it aosp or miui. That is battery will be charged till 81% then charging will be turned off.
Q. BENEFITS OF APP?
A. VERY LESS WEAR TO BATTERY RESULTING IN LONG BATTERY LIFE SPAN.
Q.HOW TO DISABLE THE FEATURE?
A. JUST CLICK THE APP IT WILL NOTIFY THAT LIMIT CHARGE IS DISABLED
REQUIREMENT
1. ROOT;
PROCEDURE TO INSTALL
Follow this :-
Install the app and deny all permission to apps they jus require root.
Then jus click the app n u r good to go no anymore worries
Q. HOW THE APP WORKS?
A. IT WORKS BY LIMITING THE PERCENTAGE TO WHICH BATTERY CAN BE CHARGED.
FOR EG - BATTERY IS CHARGED TILL 81% THEN CHARGING IS SWITCHED OFF BY THE APP. (YES, THE CHARGING IS ACTUALLY TURNED OFF , THAT IS TO SAY NO CURRENT GOES TO BATTERY)
Q.How to restore normal charging?
A. The app takes care of that ......if still any prob install "enable normal charge" app from link below n jus click it.
Resources
1. Download
Download VarX_ChargeLimiter.2.apk
Google Drive: Sign-in
Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use).
drive.google.com
Troubleshooting
1. App not getting lauched at boot by macro
Solution :- manually click app on every boot
Or I can provide solution by Tasker but then ppl don't like tasker
Yeah best thing about root is the charge disable capability.
I've been using the Advanced Charging Controller Magisk Module with the AccA frontend app to limit my charge which has been working flawlessly.
I'm curious if your app is a more streamlined version of that?
CrazyTape said:
Yeah best thing about root is the charge disable capability.
I've been using the Advanced Charging Controller Magisk Module with the AccA frontend app to limit my charge which has been working flawlessly.
I'm curious if your app is a more streamlined version of that?
Click to expand...
Click to collapse
My app jus requires a click....single click n no more worries......more over it is not a generic app...its customised for alioth...n man every one doesnot have free time like u....that they will spend hours setting up a app....ppl want one click solutions......here my app has its edge...velle PPL
N bro if u have such guts....make ur own app.....happy app making
varunrocks17 said:
My app jus requires a click....single click n no more worries......more over it is not a generic app...its customised for alioth...n man every one doesnot have free time like u....that they will spend hours setting up a app....ppl want one click solutions......here my app has its edge...velle PPL
Click to expand...
Click to collapse
I hardly believe that setting up AccA on your phone requires more time than setting up yours. And once it has been set up, it does not require further configuration. So mu question would be that what actually makes your app better than AccA?
TheSproker said:
I hardly believe that setting up AccA on your phone requi...re time than setting up yours. And once it has been set up, it does not require further configuration. So mu question would be that what actually makes your app better than AccA?
Click to expand...
Click to collapse
It's jus one click solution ....no heckles...that it....it's simple....jus one click n good to go....n m not here to compete...m jus sharing..u don't like it..good....go away...n In acca u need to download djs.....n configure it...again velle
varunrocks17 said:
It's jus one click solution ....no heckles...that it....it's simple....jus one click n good to go....n m not here to compete...m jus sharing..u don't like it..good....go away...n In acca u need to download djs.....n configure it...again velle
Click to expand...
Click to collapse
No, I don't need to set up any dj's in order for to limit my phone to 80% charge. I get what you are trying to do, but just because it is easier to set up does not mean it is necessarily better than AccA. Try to create something that has not already been done, for example the fingerprint reader only works, when you have already pressed the power button etc.. Since alot of custom roms would need that app.
TheSproker said:
No, I don't need to set up any dj's in order for to limit my phone to 80% charge. I get what you are trying to do, but just because it is easier to set up does not mean it is necessarily better than AccA. Try to create something that has not already been done, for example the fingerprint reader only works, when you have already pressed the power button etc.. Since alot of custom roms would need that app.
Click to expand...
Click to collapse
When I said it's better than any particular app.....m jus sharing...did I say in the post....OH MY APP IS THE BEEEEESSSST APP .....no.....have some logic dude..sic...n if u don't like....don't iinstall...who is asking u to do..sic
varunrocks17 said:
When I said it's better than any particular app.....m jus sharing...did I say in the post....OH MY APP IS THE BEEEEESSSST APP .....no.....have some logic dude..sic
Click to expand...
Click to collapse
You should improve your attitude. No one is saying that your app is bad, but creating "clones" of other apps is not going to convince users to stop using well known solutions that were created before your apps. All I am saying is that you should try to create something original, be calm and respectful with others and trust me, you will become a much better developer.
TheSproker said:
You should improve your attitude. No one is saying that your app is bad, but creating "clones" of other apps is not going to convince users to stop using well known solutions that were created before your apps. All I am saying is that you should try to create something original, be calm and respectful with others and trust me, you will become a much better developer.
Click to expand...
Click to collapse
Sorry bro my intent was not to be hurtful...