Screen calibrator 1.2 (LG G2)
Tune your own R G B settings
works on:
dorimanx kernel
bruce2728 kernel
cloudyfa's kernel
and as reported some aosp/cm roms with apropriate kernels.
Please thank to the kernel devs for adding the support
Also tested on some other kernel and settings didn't stick.
Credits: @xanthrax @Slimer777 for hints, informations.
Also, please see Slimer777's guide/thread about right settings.
OLD Changes:
1.0 - initial release
1.1 - added +/- buttons, little bit larger sliders
The app will autoexit on reboot(after profile loading)
The app will also autoexit on app start (you've got 5 seconds to tap anywhere to stop it), it will autoexit only if the profile is set.
To prevent exiting and to set new profile just TAP anywhere (not on controls), anywhere on the interface.
- links are removed, new version doesn't require the app to be installed after applying the settings.
Click to expand...
Click to collapse
changelog for 1.2
+ added default profile
+ added recommended profile (recommended for LG G2)
+ added init.d support
- removed app autostart on boot
- removed app terminate on profile apply
DOWNLOAD
Link for v1.2
md5: 26bae44a5e5e9d8161087d50ae54e408
Yes
Sent from my LG-LS980 using Tapatalk
bender_007 - Taking the phrase "there's an app for that" to the next level and makes it real.
Thanks for it!
Great
Added next version Pardus :good:
WOW! this is awesome buddy!
ill make a nice folder in my Homescreen with all your apps!!! =)
Maybe this could be implemented like a tab in Stweaks? Thats would be LEGEND....wait for it.....DARY! =)
best settings to be close to 6500 K ?
it would be cool if we could change gamma values too
szabyka95 said:
best settings to be close to 6500 K ?
it would be cool if we could change gamma values too
Click to expand...
Click to collapse
For best settings you can see here
I'll add gamma, too(it was in preparation already )
bender_007 said:
For best settings you can see here
I'll add gamma, too(it was in preparation already )
Click to expand...
Click to collapse
you should add that link to OP !
waiting for gamma too ! +1
Will this work for rooted Verizon LG G2? I just want to get the screen temp right. I have a spyder4pro I use to calibrate my displays. I wish I could do a full calibration on this screen!
Very nice bender :laugh: . U'r the best
th3b3 said:
Will this work for rooted Verizon LG G2? I just want to get the screen temp right. I have a spyder4pro I use to calibrate my displays. I wish I could do a full calibration on this screen!
Click to expand...
Click to collapse
It should work. Please try and tell. You don't lose anything
bender_007 said:
It should work. Please try and tell. You don't lose anything
Click to expand...
Click to collapse
I have to wait till next week when I get my new G2 :laugh: Just excited and want to be ready to start when I get it!
Ah, next week. Until next week who knows how many apps I build :good:
Great job mate, lets see what can be added more
Sent from my Darkside of LG G2
1st of all - thanks... :thumbup:
few u/i suggestions:
1. can you make the sliders bigger (wider)?
2. maybe adding - and + buttons (left/right of the sliders) that change the value by 1 step down or up
3. app opens after reboot, applies the settings and stays open until i close it manually (is this normal or a bug?)
if you need a graphic layout for the app - you know where to find me
Thnx you
Applied this settings and whites are now white.
60nine said:
1st of all - thanks... :thumbup:
few u/i suggestions:
1. can you make the sliders bigger (wider)?
2. maybe adding - and + buttons (left/right of the sliders) that change the value by 1 step down or up
3. app opens after reboot, applies the settings and stays open until i close it manually (is this normal or a bug?)
if you need a graphic layout for the app - you know where to find me
Click to expand...
Click to collapse
1. Yap, no problem
2. Also
3. This one was tricky. What if you want new settings? I can make a countdown or something.
Sent from my LG-D802 using Tapatalk
I flashed the latest dorimanx kernel, the settings stick after
That's great!
Sent from my Darkside of LG G2
bender_007 said:
3. This one was tricky. What if you want new settings? I can make a countdown or something.
Click to expand...
Click to collapse
why would i want new settings if i didn't reboot because of this tool?
your tool changes settings on the fly and without asking for a reboot...
so, if after the reebot i decide to change something, i'll open the app myself... makes sense?
Wow, haven't checked-in for a week and now there is an app for it! Great Job. Did you find any other display parameters while you were building this app?:good::good::good:
Related
Due to conflicts between Color Calibration and the camera/video playback overlays, I would recommend not to do these modifications. If it was the case, just restore your nandroid backup.
Sorry for the inconvenience.
I'll try to improve the compatibility with our devices.
Hello everyone,
I just wanted to share some knowledge about a discovery I've made today.
Just like a lot of our Galaxy S community members, my screen was way too blueish (temperature "over 9000" kelvin).
However, by googling a few keywords around, I saw that a fix by storm9999 was available for the droid, N1, and even desire xx phones.
Basically I just tried to do the modifications on my Galaxy S with the Darky's 6.0 Gingerbread edition rom. And it works!
Here is a screenshot of the application:
http://img600.imageshack.us/i/uicolor.jpg
Requirements:
- Rooted phone
- Clockworkmod
- An Android 2.2[+] ROM (successfully tested on Darky's 6.0)
Installation:
- Make an nandroid backup just to be safe (français, english)
- Put the under-attached zip and apk files into the root folder of your internal sdcard
- Restart your phone in recovery mode
- Choose "install zip from sdcard", "choose zip from sdcard", and select the "calibrated-signed..." zip file
- Reboot your phone. Note: At first reboot, sim card may not be functional. Just reboot, and the issue should be gone
- Install the "calibrator-5.1" apk file with Astro or else
- Enjoy!
Please if you try this fix with another froyo rom, tell us if it works or not. I'll put a compatibility list here!
ROM compatibility:
- Darky's v6.0 Gingerbread ed. JPX => OK
- Stock JPU with CF-root => OK
Known bugs:
- If calibration is enabled, Spare Parts will crash when Render Settings is opened.
- When you tune your colors, the overlay appears over the sliders, and not over the calibration field at the top
- Camera and video playback lose their overlay
Credits
- Storm9999 for the apk and certificate
- Cyanogen and his team for the source files
- RixKliq for the icon making
- Xenio2000 for the UI improvements
- Supercurio for not integrating his awesome voodoo colorfix in JPU and JPX versions Sans rancune l'ami!
eruur said:
- Supercurio for not integrating his awesome voodoo colorfix in JPU and JPX versions Sans rancune l'ami!
Click to expand...
Click to collapse
Lol yeah it's a good alternative and don't require recompiled kernel !
Limitation is that it lower the final brightness and reduce the color-resolution (something like 18 or 20 bits depending the adjustment you apply - very rough estimation)
but hey, it works !
Thank you eruur
Just installed, but i noticed no differencies, droid calibrator has red blue and green at 1000 is it ok?
Working in stock JPU with CF-root
but is the color overlay really supposed to appear over the sliders? shouldn't it be covering the calibration field at the top?
looks like this here:
Razer(x) said:
Just installed, but i noticed no differencies, droid calibrator has red blue and green at 1000
Click to expand...
Click to collapse
You need to click on "User 1", then tune your colors. If your screen is a little blue, just decrease its value to something like 960.
Then save your settings.
At first I thought it wasn't working too, but if I put my blue value to 500, my screen is all yellow :d So it is actually working
I also recommend to do your calibration with the maximum brightness in order to be accurate!
@supercurio: De rien! lol
XlAfbk said:
Working in stock JPU with CF-root
but is the color overlay really supposed to appear over the sliders? shouldn't it be covering the calibration field at the top?
Click to expand...
Click to collapse
Indeed, I've noticed that also. You need to save, quit, and relaunch the calibrator to see the effect on the top field. I will try to fix the overlay position!
Does it make you lose overlays in camera and video player like it used to do before? Ie. is it modified in some way to be more compatible with stock Galaxy Froyo or is it just the unmodified files from stormy?
works with darky's rom 6.0 JPX + speedmod kernel K11C
Case_ said:
Does it make you lose overlays in camera and video player like it used to do before? Ie. is it modified in some way to be more compatible with stock Galaxy Froyo or is it just the unmodified files from stormy?
Click to expand...
Click to collapse
I searched and did not find any info about galaxy compatibility. You're right, the overlays do not work anymore in camera and video player.
Sorry about that, hadn't noticed. I guess it doesn't work that well afterall :/
I'll look into that.
Wowww ! work very good
eruur said:
You need to click on "User 1", then tune your colors. If your screen is a little blue, just decrease its value to something like 960.
Then save your settings.
At first I thought it wasn't working too, but if I put my blue value to 500, my screen is all yellow :d So it is actually working
I also recommend to do your calibration with the maximum brightness in order to be accurate!
@supercurio: De rien! lol
Click to expand...
Click to collapse
Thanks, mine seems to be good with no changes
nesquix said:
Wowww ! work very good
Click to expand...
Click to collapse
Does your camera still work good?
i can confirm the camera issues. had to restore libsurfaceflinger.so
XlAfbk said:
i can confirm the camera issues. had to restore libsurfaceflinger.so
Click to expand...
Click to collapse
Where to find it?
in your nandroid backup or an extracted factoryfs.rfs
XlAfbk said:
in your nandroid backup or an extracted factoryfs.rfs
Click to expand...
Click to collapse
Yeah, but where? (path)
eruur said:
I searched and did not find any info about galaxy compatibility. You're right, the overlays do not work anymore in camera and video player.
Sorry about that, hadn't noticed. I guess it doesn't work that well afterall :/
I'll look into that.
Click to expand...
Click to collapse
I think I've posted about that in the original thread quite some time ago and I'm fairly certain I've mentioned this option in some Galaxy S threads either here in Development or in General. But that was most likely sometime in August or September, so it's long forgotten.
I guess it makes sense that the overlays stop working, given that you need to replace the libsurfaceflinger.so for this to work.
Too bad, I was quite excited that someone finally managed to get it to work on stock Galaxy ROM. I'd love to have the option to calibrate my screen to 6500K properly to match my PC screen and I thought someone finally made it possible without the need to use CyanogenMod (not that I have anything against CM, it's just it isn't all that stable/usable just yet).
Anyway, if anybody is interesting in using this even in this state, my screen is pretty close to 6500K when using these settings:
R: 965 G: 740 B: 720
Of course every screen is a bit different and the color temperature of SAMOLED screens changes with time, so no guarantees that this will work for you as well.
Case_ said:
I think I've posted about that in the original thread quite some time ago and I'm fairly certain I've mentioned this option in some Galaxy S threads either here in Development or in General. But that was most likely sometime in August or September, so it's long forgotten.
I guess it makes sense that the overlays stop working, given that you need to replace the libsurfaceflinger.so for this to work.
Too bad, I was quite excited that someone finally managed to get it to work on stock Galaxy ROM. I'd love to have the option to calibrate my screen to 6500K properly to match my PC screen and I thought someone finally made it possible without the need to use CyanogenMod (not that I have anything against CM, it's just it isn't all that stable/usable just yet).
Anyway, if anybody is interesting in using this even in this state, my screen is pretty close to 6500K when using these settings:
R: 965 G: 740 B: 720
Of course every screen is a bit different and the color temperature of SAMOLED screens changes with time, so no guarantees that this will work for you as well.
Click to expand...
Click to collapse
Sorry for the false joy.. I was also disappointed!
Anyway, I'll play with the modified libsurfaceflinger to see if I can come up with something.
Oh and for Razer: path /root/system/lib
I think you need to put a DEV tag on the title. Good threads have been tossed to general becuse of this.
Sent from my GT-I9000 using XDA App
oh ****ttttt camera don't work too on JPX
Hello XDA members,
Problem:
I never liked a lockscreen i just want to turn my phone on and work with it. Thats why i created a app with taskers appfactory
Solution:
The app looks a few seconds with the proximity sensor if you turn on the screen, if something is close to the sensor the phone will relock itself.
You can edit the time of checking in the settings menu.
Why this thread:
I wanted to get feedback from you to resolve problems with it and make it work better to the needs of people.
A few questions:
- Is it simple to install?
- Does it work properly?
- Feature request
- What would you like to change?
- Do you like the app?
Requirements:
- Proximity sensor
How to install with help?
- Follow step 1 and step 2 in the app
How to install manually?
- Settings -> Security -> Device administrators -> check SmartLock
- Settings -> Security -> Lockscreen -> select "none"
How to uninstall:
- Settings -> Security -> Device administrators -> uncheck SmartLock
- Uninstall as usual
What means PocketLock?
- PocketLock is a different way of locking, it will lock your phone when your screen is ON and you put it in your pocket.
You can set the directions (left, right, down) when it will check in the settings menu
- Maybe you need to set the checktime a bit higher in the settings menu. because it takes time to get your phone in your pocket.
- Maybe eats more battery (dont know it for sure)
Frequently Asked Questions:
Q. Why does SmartLock not lock my phone?
A.
- Did you enable SmartLock as Device administrator ( Settings -> security -> device administrator -> check SmartLock )
- Reset your settings in the Settings menu of SmartLock
Changelog:
See Play Store
Download:
- Play Store (Android 2.3+)
- Play Store (Android 4.0+)
AW: [APP] SmartLock - no lockscreen, proximitysensor as guard
Thanks!!
Will try now on Cm 10.1 & stock LSD and report back.
Edit: Works without Problems on Cm10.1 ! Your setup guide is very clear and easy to understand, awesome!
On stock LSD the 2nd step leads to "security settings" , but it should lead to "Lockscreen". This is not a real big problem but may confuse people.
All over this App is great, thank you very much!
Sent from my GT-I9100 using xda app-developers app
ohwarumbloss said:
Thanks!!
Will try now on Cm 10.1 & stock LSD and report back.
Edit: Works without Problems on Cm10.1 ! Your setup guide is very clear and easy to understand, awesome!
On stock LSD the 2nd step leads to "security settings" , but it should lead to "Lockscreen". This is not a real big problem but may confuse people.
All over this App is great, thank you very much!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your first reply, and really nice to hear you like it.
The problem with the lockscreen is that every rom is different and the place of lockscreen disabling is not the same.
So this is one thing to fix
AW: [APP] SmartLock - no lockscreen, proximitysensor as guard
Diechel said:
Thank you for your first reply, and really nice to hear you like it.
The problem with the lockscreen is that every rom is different and the place of lockscreen disabling is not the same.
So this is one thing to fix
Click to expand...
Click to collapse
Maybe 2 editions, one for stock, one for Cm10.1
But this is really no biggie, app is awesome
Sent from my GT-I9100 using xda app-developers app
Re: [APP] SmartLock - no lockscreen, proximitysensor as guard
ohwarumbloss said:
Maybe 2 editions, one for stock, one for Cm10.1
But this is really no biggie, app is awesome
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thats an option thanks for reply
Did you already use PocketLock? so yes what do you find about it
Are you using the app right now on your device or did you already uninstalled it?
Greetings
Sent from my Transformer Prime TF201 using xda app-developers app
Re: [APP] SmartLock - no lockscreen, proximitysensor as guard
Hey!
Nice app mate. Thanks!
Really easy setup(fool proof) and working great!
Any chance of making it so it works WITH lockscreen enabled?
It's even a good idea to implement this in a ROM to avoid wrong button presses if you unlock in your pocket by mistake.
Cool!
Will test further...
Ive noticed settings are blacked out in some areas...is this normal?
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
pSyCh¤_O_O said:
Hey!
Nice app mate. Thanks!
Really easy setup(fool proof) and working great!
Any chance of making it so it works WITH lockscreen enabled?
It's even a good idea to implement this in a ROM to avoid wrong button presses if you unlock in your pocket by mistake.
Cool!
Will test further...
Ive noticed settings are blacked out in some areas...is this normal?
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
Click to expand...
Click to collapse
The blacked areas are maybe caused by the theme you are using?
I will look if i can implement the thing with lockscreen enabled, think tonight
Thanks for your response btw
AW: [APP] SmartLock - no lockscreen, proximitysensor as guard
Diechel said:
Thats an option thanks for reply
Did you already use PocketLock? so yes what do you find about it
Are you using the app right now on your device or did you already uninstalled it?
Greetings
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
Yes I am still using it and there's no reason to uninstall it
I had no graphic bugs, btw! First Rom is stock XWLSD with Alliance Mod and 2nd is 2901 build by MCM (10.1)
Greetings!
Thomas
P.s. No, didn't try Pocket Lock, will report back!
Edit: I have no clue what Pocket Lock changes but my shopping tour went well without any unlocks so for me, your App works fine!
Sent from my GT-I9100 using xda app-developers app
Re: [APP] SmartLock - no lockscreen, proximitysensor as guard
ohwarumbloss said:
Yes I am still using it and there's no reason to uninstall it
I had no graphic bugs, btw! First Rom is stock XWLSD with Alliance Mod and 2nd is 2901 build by MCM (10.1)
Greetings!
Thomas
P.s. No, didn't try Pocket Lock, will report back!
Edit: I have no clue what Pocket Lock changes but my shopping tour went well without any unlocks so for me, your App works fine!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Nice
PocketLock is a different way it locks your phone when screen is on and you put it in your pocket
In the settings menu you can select left,right or down. That are the conditions to check if its in your pocket.
It checks as long as you set checktime, so maybe you need a little bit more checktime for pocketlock. hehe
Hope this helps, if you think what is he talking about just say it
It can use some more battery because of movement tracking, just test it
EDIT:
Just created a Google Play developers account and i will release SmartLock in there i think tomorrow, just because i can
We will see
The easy thing is that everybody can stay up to date
Sent from my Transformer Prime TF201 using xda app-developers app
Re: [APP][BETA] SmartLock v1.1 - no lockscreen, proximitysensor as guard
Diechel said:
The blacked areas are maybe caused by the theme you are using?
I will look if i can implement the thing with lockscreen enabled, think tonight
Thanks for your response btw
Click to expand...
Click to collapse
Yes. Im using darkjelly theme sorry.
Thanks for implementing with lockscreen enabled. Nice:thumbup::thumbup:
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
pSyCh¤_O_O said:
Yes. Im using darkjelly theme sorry.
Thanks for implementing with lockscreen enabled. Nice:thumbup::thumbup:
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
Click to expand...
Click to collapse
Its not implemented yet, i will look to it.
EDIT:
Your request will be in v1.2 just made a sketch and I can enable the proximity when lockscreen is on screen
Just published v1.1 on the Play Store but need to wait till its available
EDIT:
https://play.google.com/store/apps/details?id=com.michelt.smartlock
EDIT (20-02-13 10.35):
Made a test build for lockscreen enabled, please make sure you install the old v1.0 because of new package name.
You need to make smartlock device admin again, just follow step 1 if you dont know where to find
test build: SmartLock.37.apk
Can you give feedback to me if it works for you ?
Re: [APP][BETA] SmartLock v1.1 - no lockscreen, proximitysensor as guard
Its working great with lockscreen enabled!!!:thumbup::thumbup:
Good job mate!
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
Did someone already test PocketLock
If yes, what do you find about it?
SmartLock v1.2 released today
- Play Store on phone [RECOMMENDED]
- Play Store web link
v1.2 (10-03-13)
- Also lock when lockscreen is enabled, double security
- Better screen on/off detection
- New type of installation helper
- Vibrate when set vibrate time
- Added installation video
Re: [APP][BETA] SmartLock v1.2 (10-03-13) no lockscreen, proximitysensor as guard
Installed SmartLock v1.2 yesterday. I'm on Disaster v9 (JB 4.2.1). Simple installation and setup. Working without any problems including PocketLock. Will have to test longer to check if there is no battery drain, but so far all looks ok.
Must say that it is really great idea and app. Until I used it I did not know how convenient and comfortable usage of my phone might be without haveing to unlock it every time. It would be great if this app could be built into rom as one of the lockscreen options.
I have noticed one issue only, nothing major - vibration time on lock sometimes is shorter then set. Lookes like it happens only when I unlock phone for few seconds and put it back into pocket.
As for app menu it is ok, I would love it more if it looked like standard android JB settings menu.
Thanks a lot for your time, effort and the app.
Pidu said:
Installed SmartLock v1.2 yesterday. I'm on Disaster v9 (JB 4.2.1). Simple installation and setup. Working without any problems including PocketLock. Will have to test longer to check if there is no battery drain, but so far all looks ok.
Must say that it is really great idea and app. Until I used it I did not know how convenient and comfortable usage of my phone might be without haveing to unlock it every time. It would be great if this app could be built into rom as one of the lockscreen options.
I have noticed one issue only, nothing major - vibration time on lock sometimes is shorter then set. Lookes like it happens only when I unlock phone for few seconds and put it back into pocket.
As for app menu it is ok, I would love it more if it looked like standard android JB settings menu.
Thanks a lot for your time, effort and the app.
Click to expand...
Click to collapse
Dear Pidu,
Thank you for your feedback and really nice to hear you like it
There should be no excessive battery drain with only SmartLock on, PocketLock can use some extra juice from your battery because of the motion sensor being used while screen is on.
I will check if i can reproduce you issue with the vibrate time
The layout of the app is a bit difficult because its made with tasker and not programmed in Java
Maybe a further release will be programmed so stay tuned.
I would like if you give feedback via play store so that other users can read it there.
Thanks
Re: [APP][BETA] SmartLock v1.2 (10-03-13) no lockscreen, proximitysensor as guard
This afternoon my daughter found big issue with PocketLock. From time to time she is using my phone to play games when travelling. Unfo PocketLock Left and Right turn screen off every time she is holding the phone horizontally while playing. Proximity sensor detects her finger and motion sensor - constant movement. Had to disable both options.
I did not notice extensive battery drain caused by PocketLock.
Will test the app few more days and then give feedback on Google Play.
Pidu said:
This afternoon my daughter found big issue with PocketLock. From time to time she is using my phone to play games when travelling. Unfo PocketLock Left and Right turn screen off every time she is holding the phone horizontally while playing. Proximity sensor detects her finger and motion sensor - constant movement. Had to disable both options.
I did not notice extensive battery drain caused by PocketLock.
Will test the app few more days and then give feedback on Google Play.
Click to expand...
Click to collapse
Understand the problem you have and will think about a solution this evening
do you maybe have a suggestion how you want it?
Re: [APP][BETA] SmartLock v1.2 (10-03-13) no lockscreen, proximitysensor as guard
Diechel said:
Understand the problem you have and will think about a solution this evening
do you maybe have a suggestion how you want it?
Click to expand...
Click to collapse
As written above I have disabled left and right options of PocketLock. Still few times phone locked when my daughter was playing and motion sensor detected downwards movement - kid simply shakes phone in different directions
It might be hard to keep PocketLock active and avoid locking in certain situations but I would prefere to avoid having to switch it off and then on manualy. Personally I find PocketLock down most useful, so it is still fine for me, but it depends on individual preferences of the user.
Pidu said:
As written above I have disabled left and right options of PocketLock. Still few times phone locked when my daughter was playing and motion sensor detected downwards movement - kid simply shakes phone in different directions
It might be hard to keep PocketLock active and avoid locking in certain situations but I would prefere to avoid having to switch it off and then on manualy. Personally I find PocketLock down most useful, so it is still fine for me, but it depends on individual preferences of the user.
Click to expand...
Click to collapse
Iam busy with a sketch which can have a notification in your statusbar with the status of SmartLock / PocketLock
You can enable the notification in the settings menu to stay forever or just come up when phone is left or right.
Normally if you click on the notification the settings menu will come up, but you can enable the option
to disable PocketLock if you click on it.
What is your first impression of that?
Think will release it today on the forum
"This thread is closed, but fear not!!! Candy5 isn't going away. I am just consolidating all of the variants into one general thread that can be found at:
http://forum.xda-developers.com/show....php?t=2968801
Please from this point on post all comments and questions there. Also since this is for ALL variants please specify which device you are using when asking for help. Thank you."
CHANGELOG HERE
Device specific changelog:
- added smartcase sleep/wake function (thanks @invisiblek)
- video recording fixed
Bugs list:
- signal drops occasionally for some users
- fixing permissions in twrp causes bootloop
- you tell me
Although we at CandyRoms will never ask for donations they are greatly appreciated. We have decided to reward the kind people who part with their hard earned money to help further the development of CandyRoms.
Contributors:
If you make a donation please PM me aswell so I can say thanks and give you the proper credit here.
Thanks for the new ROM... You might want to change the download link, it reads: 'Candy5 D852 Official'
scribbles92 said:
Thanks for the new ROM... You might want to change the download link, it reads: 'Candy5 D852 Official'
Click to expand...
Click to collapse
Thanks, done. Been a long day lol.
Cool Thank you for the new rom this is sweet
purrbody sonic rukia purrs
still says d851 haha
Flashing now. Give this baby a whirl
yanowman said:
still says d851 haha
Flashing now. Give this baby a whirl
Click to expand...
Click to collapse
only on crapatalk
Cuzz1369 said:
only on crapatalk
Click to expand...
Click to collapse
Is hotspot hack included ?/aospal and illusion 5.0 don't have it
Anyone having problems with phone? Like when u are talking and it locks it self then u won't hear the other person and they can't hear you?
yanowman said:
Is hotspot hack included ?/aospal and illusion 5.0 don't have it
Click to expand...
Click to collapse
Instead of asking in every LP thread, you could just try the ROM and see for yourself. Just a suggestion...
yanowman said:
Is hotspot hack included ?/aospal and illusion 5.0 don't have it
Click to expand...
Click to collapse
Or just stay on a ROM that you trust already since its ohhhhh so very important to you.
12.12.14
- Added Dpi Changer...Candy Interface
- Added Option to remove Carrier logo on lock screen
- Fixed Wake on Plug /Unplug
- Fixed/Moved Network Indicator to the left
- Rearranged some Settings menu's to Candy specifications
- Added some [N6] L UIsounds
- Added ALL Cm's new features (quite a few)
- TONS of Cm fixes and maintenance
- Fixed location always on in statusbar
- Disabled option to reboot to bootloader
Candy5-d851-0.8.2-beta.zip
Cuzz1369 said:
12.12.14
- Added Dpi Changer...Candy Interface
- Added Option to remove Carrier logo on lock screen
- Fixed Wake on Plug /Unplug
- Fixed/Moved Network Indicator to the left
- Rearranged some Settings menu's to Candy specifications
- Added some [N6] L UIsounds
- Added ALL Cm's new features (quite a few)
- TONS of Cm fixes and maintenance
- Fixed location always on in statusbar
- Disabled option to reboot to bootloader
Candy5-d851-0.8.2-beta.zip
Click to expand...
Click to collapse
nice downloading now thank you
Nice thank you candy was always my favorite you rock
Did I break custom led stuff on this device too?
Cuzz1369 said:
Did I break custom led stuff on this device too?
Click to expand...
Click to collapse
Working here. No issues.
Does this kernel have faux sound support? The DPI on the nav bar is all out of whack. The smaller DPI you set it at, the buttons just stretch side to side. The height of the buttons doesn't change.
Sent from my LG-D851 using Xparent BlueTapatalk 2
Anyone having problems with hangouts app?
Galaxysm said:
Anyone having problems with hangouts app?
Click to expand...
Click to collapse
What problems...[emoji35]
I wanted to go ahead and start a thread and get your guys option on what you want to see in the new ROM before uploading it. You guys can ask for Apps, Mods, etc and I'll try my best to implement everything you guys want. BTW, check below to make sure your request isn't already going to be added. Currently I have this:
Debloat
Greenify
XDA Labs
AdAway
Now I need your help, what do you guys want?
To add:
Mobile Data Tggle
Hotspot Mod
Build.prop tweaks
No Xposed as @tdhite has pointed out, its a security exploit.
v2 will on M rite . If so please root and bring the data toggle back and xpose . also remove all the sprint bloatware . I think stocl is the best . no need to add
on
Sent from my SM-G920P using Tapatalk
TaNuXzx said:
v2 will on M rite . If so please root and bring the data toggle back and xpose . also remove all the sprint bloatware . I think stocl is the best . no need to add
on
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
Data toggle and xposed, got it
some suggestions from my end:
- remove all sprint bloatwares.
- remove all google apps (since users can install only which they need from PS easily).
- data toggle, wifi hotspot.
- some of nice features: advance power menu (3 reboot options, screenshot), youtube adblock, etc.
- remove carrier label.
- battery life improvement.
IMHO, simple is the best.
thank you for your great coming rom.
1619415 said:
Data toggle and xposed, got it
Click to expand...
Click to collapse
U r best of the best bro
Sent from my SM-G920P using Tapatalk
Notification bg and text color.
Sent from my SM-G925P
TaNuXzx said:
v2 will on M rite . If so please root and bring the data toggle back and xpose . also remove all the sprint bloatware . I think stocl is the best . no need to add
on
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
+1
- as much as possible it looks international version, if can be done
- phones are not made identically, some owners have the luxury of flashing anything on their phone some have some problems, my request, is kindly provide procedure for rollback when it is possible. i read that, you cannot rollback to lollipop after flashing MM
legola said:
+1
- as much as possible it looks international version, if can be done
- phones are not made identically, some owners have the luxury of flashing anything on their phone some have some problems, my request, is kindly provide procedure for rollback when it is possible. i read that, you cannot rollback to lollipop after flashing MM
Click to expand...
Click to collapse
well lots of people get back to L from M using odin my friend
Sent from my SM-G920P using Tapatalk
TaNuXzx said:
v2 will on M rite . If so please root and bring the data toggle back and xpose . also remove all the sprint bloatware . I think stocl is the best . no need to add
on
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
legola said:
+1
- as much as possible it looks international version, if can be done
- phones are not made identically, some owners have the luxury of flashing anything on their phone some have some problems, my request, is kindly provide procedure for rollback when it is possible. i read that, you cannot rollback to lollipop after flashing MM
Click to expand...
Click to collapse
What if I do the international boot animation and make a flashable to install the sprint one?
Please don't add in XDA labs (bloat)! But would love data toggle, new boot/shutdown animations, Xposed baked into settings, no sprint bloatware, and possibly a script to remove ALL bloat apps/script to install selected bloat apps (if the ROM will already be heavily debloated).
my wishlist - some (if not all) you probably already have built in;
-Remove sprint carrier label
-option to remove am/pm
-remove volume warning
-dark boot/shutdown animations
-add shutter sound toggle
-remove ItsOn (or anything similar)
-APM
-ViPER4Android didn't realize this was the same as DivineBeats
I don't know if this can be done, but on lp, you could set an app to open once or set it it to be the new default. Now, you can only set it to be the default. Would love to be able to set an app to open just once again, and ask each time.
I'm a sucker for a mostly stock base, so I'd liek to request to not add any new apps at all except for xposed, and possibly adaway. All other apps can be picked up easily from the play store.
I'd even take it a step further and say don't remove any bloat by default, and instead maybe add a optional script or options to remove specific items on install. Again, easy enough to remove bloat through TB.
Thanks for putting this together, and also asking for feedback. Much appreciated.
Put a auto APN config for rest of the world, no limit 160 characters in SMS
Please add long press delay mod to the stock keyboard. So we can change the delay from 500 ms (stock) to 200 ms, etc. MOAR ROM for the Sprint Galaxy Note 5 has this option. Thanks and look forward to the new ROM
To take off The status bar background on power saving mode. Thanks for the rom
When do you think you will post the rom?
fachadick said:
my wishlist - some (if not all) you probably already have built in;
-Remove sprint carrier label
-option to remove am/pm
-remove volume warning
-dark boot/shutdown animations
-add shutter sound toggle
-remove ItsOn (or anything similar)
-APM
-ViPER4Android didn't realize this was the same as DivineBeats
I don't know if this can be done, but on lp, you could set an app to open once or set it it to be the new default. Now, you can only set it to be the default. Would love to be able to set an app to open just once again, and ask each time.
I'm a sucker for a mostly stock base, so I'd liek to request to not add any new apps at all except for xposed, and possibly adaway. All other apps can be picked up easily from the play store.
I'd even take it a step further and say don't remove any bloat by default, and instead maybe add a optional script or options to remove specific items on install. Again, easy enough to remove bloat through TB.
Thanks for putting this together, and also asking for feedback. Much appreciated.
Click to expand...
Click to collapse
Agreed.
My personal list from the current rom im on right now which is 5.1.1
Stock/ Rooted -
-Flashed Twrp then install snapchat to login and then
-Flashed Xposed Installer to gain the package
-Install 3 apks which were xinstaller to downgrade freely , adblock youtube verson, snap prefs
-Flashed the Hacker kernal - still trying to justify settings so it ahndles battery with perfomance tied together i had at least 4 hrs of battery life from this versus stock kernal with 3 or 3 and half battery life.
- packagae disabler, sjust incase the bloatware isnt turned off or removed like Sprint Apps, Update rom notification, Voicemail ( dont undestand when you can just call it who needs an app)
- a camera tweak for better picture/video recording like Cinema 4k but an actual camera mod using the stock camera.
so same settings as cinema 4k but a mod for the stock camera
- Viper Android audio mod! definitely helps a bunch.
mainly what i use.
I like everything u listed. Can u add weather on lockscreen as an option and hidden settings 4 tw launcher?
Sent from my SM-G920P using Tapatalk
1619415 said:
No Xposed as @tdhite has pointed out, its a security exploit.
Click to expand...
Click to collapse
Can you clarify this? I think I missed that post.
fachadick said:
Can you clarify this? I think I missed that post.
Click to expand...
Click to collapse
This was on hangouts, but if you want, feel free to PM him and ask him to expand he'll be able to expand easily.
1) Copy M-ROM to your Internal Storage.
2) Reboot into TWRP
3) Backup everything(tick EVERYTHING). Keep it in a safe place (you might need to restore your basebands later if you run into a problem).
4) Wipe cache, dalvik cache, system and user data. Clean flashing is strongly suggested for stability.
5) proceed to install menu and select M-ROM.
6) You will enter the Chinese part;
FirstScreen:
Clear Data and Interface Selection
A)Do not clear user data(select this one)
B)Clear user data
Choose Interface:
C) Xperia Z Lock Screen(Strongly suggested for stability)
D) Xperia X Lock Screen
7) Next screens do not tick anything
8) Proceed to flash.
9) When flash ended, restart. The first restart might have bootloop which is normal. After nearly 10 min your device will boot. Root and Google services included.
For debloating Chinese apps install this app( You must delete all apps with Chinese names ):
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
Install Xperia Keyboard from here:
https://www.apkmirror.com/apk/sony-...ria-keyboard-8-1-a-0-12-android-apk-download/
V.2.3----------------------------------------------------------------------------------------------------------
Single: https://mega.nz/#!fcdlVL5I!g8I5yarPPQQ18CyeZgkuZaHFNpnUrPOCPi1fQuUsAdM
Single: https://mega.nz/#!VUciRKyK!OmQSFVK6XHJf7xl8INgwoYNI8s6VjDI8vuiXBeH2kSk
Dual: https://mega.nz/#!2clSiYjK!U-L_US6meYB1OX5R36zRdt-7k5QAxDTqCDXFuZ0RjtU
V.2.2----------------------------------------------------------------------------------------------------------
Single: https://mega.nz/#!vFMH2BbC!qrLB1RIQpy71TocMhKHPf9Son6tMgMVNinrPN6BsTf8
Dual: https://mega.nz/#!fBsDkZIS!wCozKEd_R8Vt4JFU11hVGHqtM10ys6Way-U1mnUAtGk
V.2.1----------------------------------------------------------------------------------------------------------
E6553 Single:
https://mega.nz/#!LRFGgYKS!nme_PbKE5d6HMRIvpYRDpqbVofTjApjGZBeI0t1cnCo
https://drive.google.com/open?id=1s_Nqxepol8cRYgsvkmqKC7xJDSyI5X5n
E6533 Dual:
https://mega.nz/#!eM0g2BRK!_6AeCZnscMr6YegmYUrfbzF7MeWrjn9lOR7-j3IYmKc
https://drive.google.com/open?id=1Kyu8xAVgU4Zbx4dy1kEItM7cGUX4eyRw
V.2.0----------------------------------------------------------------------------------------------------------
E6533 Dual:
https://mega.nz/#!bJFXGSqA!OLyXLJoi7FvptprqAXHmFKj8lvWdEBzQMT1r5-oNHho
E6553 Single:
https://mega.nz/#!jAEnWZgR!FxG5XuWVuc8Kex9nxIh-NUemOqLHKvPZ37upRhCvi_Y
V.1.9-----------------------------------------------------------------------------------------------------------
E6533 Dual:
https://mega.nz/#!NxsE0SAb!mIdc0-bRXlTyhXMlyGmSe4rZ12dnbivITtAZvrzmKtg
E6553 Single:
https://mega.nz/#!J0YU3RIS!uZDZwc8YfTSBLd02dK_qyUkJp4cKjKo9amJapo09MIo
https://drive.google.com/file/d/0B7AO3t6yhklbajNTQmpXNDRTSk0/view
M-rom Settings translation:
Network speed on status bar
Do not display lock screen clock
Transparent lock screen clock
Auto rotate lock screen
Display album art on lock screen
Call recording setting
Enable call recording
Play a tune when recording calls
Archive of recorded calls
Double tap the status bar to sleep
Navigation bar
Expanded desktop
thanks to @kgalv419 & @bkh_0538 & @Kungencortes & @HaveAboy & @doctorsworld99
Changelog:
v2.3------------------------------------------------------------
Long press a small button to hide the navigation bar
long press any app for pop-up
updated apps
v2.2------------------------------------------------------------
Long press the power button to turn flashlight on\of
Long press the volume key to switch songs
Modified the screen image
Added a lock screen password is displayed when the shutdown menu
v2.1-------------------------------------------------------------
Modified the navigation bar to reduce the height of the virtual key
added night mode (Blue light filter)
Added long press the back button to hide the navigation bar
V2.0---------------------------------
Xperia Oreo theme 1.0
updated to XZ 41.2.A.7.76 data
lock screen clock display settings
lock screen clock transparent settings (X Interface)
Lock Screen Music Cover Display Settings
Lock Screen Rotation Settings
adjusted common contacts desktop plug-in
---------------------------------------------------------
based on 32.4.A.1.54
updated to XZ 41.2.A.7.65 data
update app, Google services, SuperSU and other
enhanced camera
enhance the volume and sound effects of the amplifier to
enhance the release of support equalizer to adjust the effect of
updated photos plug-ins and the world clock Small plugin support new home page (com.sonymobile.home)
-------------------------------------- ----------
XZs camera
lift the camera limit
XZs STAMINA power saving mode
double tap to sleep
update a bunch of app
update Sony frame
------------ ------------------------------------
add task lock
add dark theme background
----------------------------------------------- -
XZs interface and animation
status bar net speed
navigation bar height adjustment
---------------------------- --------------------
Lightweight Simplification
DRM Patch
Disable RIC
TWRP3.1 (power button + power down in the shutdown state)
Busybox
SELinux status change to PERMISSIVE
Super SU V2.79
crack system signature
setting recovery 7.1 feature
font function
XZ country line 7.1 configuration file
dialing add T9 pinyin
call recording
add intelligent cleanup
add extended desktop
*All credit goes to the developer. I created this thread solely because of demands.
Im sure ppl will appreciate this!
Can't Wait
Can't Wait to test this gem, will post my feedback after today! :good::good:
I will give it a try
My review
Some battery draining during idle, probably it's a Nougat issue, still no M features as in MM, this is due to kernel cannot be fully rooted, so my advice is getting back to 1.9.5 and wait for further upgrades and full root.
nosiobadx said:
M.........
---------- Post added at 07:55 AM ---------- Previous post was at 07:53 AM ----------
nosiobadx said:
My review
Some battery draining during idle, probably it's a Nougat issue, still no M features as in MM, this is due to kernel cannot be fully rooted, so my advice is getting back to 1.9.5 and wait for further upgrades and full root.
Click to expand...
Click to collapse
did you flash zaches kernel to get full root and best battery?i am not in my city and cant try them out and when i arrive home i will give them a try 100%
Click to expand...
Click to collapse
pou_gh2 said:
nosiobadx said:
M.........
---------- Post added at 07:55 AM ---------- Previous post was at 07:53 AM ----------
did you flash zaches kernel to get full root and best battery?i am not in my city and cant try them out and when i arrive home i will give them a try 100%
Click to expand...
Click to collapse
Yes I did.
Click to expand...
Click to collapse
Some apps don't work correctly, and I don't know if this just happens to me but other people can't hear what I say through calling
nosiobadx said:
pou_gh2 said:
Yes I did.
Click to expand...
Click to collapse
i dont know anymore?,i wanna change my phone to a cheap phone because that really has a bad battery and heat is really annoying! and i dont have money to buy a sony phone so i wanna buy a xiaomi redmi note 4 with helio x20 chip,i suggest you not to wait for a good nought because sony is not caring about z3+
Click to expand...
Click to collapse
pou_gh2 said:
nosiobadx said:
i dont know anymore,i wanna change my phone to a cheap phone because that really has a bad battery and heat is really annoying! and i dont have money to buy a sony phone so i wanna buy a xiaomi redmi note 4 with helio x20 chip,i suggest you not to wait for a good nought because sony is not caring about z3+
Click to expand...
Click to collapse
Best probably is to use an aggressive thermal mod which keeps the device at 40-45°C max,
since that's the optimal temperature range for the battery, too
Lots of early throttling or only enabling 6 instead of 8 cores - similar to Snapdragon 808,
also underclocking the GPU helps A LOT (battery + temperature)
Click to expand...
Click to collapse
zacharias.maladroit said:
pou_gh2 said:
Best probably is to use an aggressive thermal mod which keeps the device at 40-45°C max,
since that's the optimal temperature range for the battery, too
Lots of early throttling or only enabling 6 instead of 8 cores - similar to Snapdragon 808,
also underclocking the GPU helps A LOT (battery + temperature)
Click to expand...
Click to collapse
I can't write into system yet on nougat, that's why I went back to MM, flashed M-ROM 1.9.5 installed latest zach's kernel for 5.11, disabled Input boost and touch boost with kernel auditor, also flashed Govtuner zip. And smart temperature also, and I'm having good results regarding battery and heat as well.
Click to expand...
Click to collapse
AM I the only one who likes this rom? It's really smooth, battery friendly and charges faster than 1.9.5.
Share a screenshots from this rom please
Particular, from customize panel
Tanx
This is nice, but not really my thing when everything doesn't really work correctly. I've got to get into all the apps to start whenever restarting the phone. Something really annoys me like I use drupe or appsii apps , they're supposed to be shown on the screen, but they just appear for a few seconds and disappear, and just appear back when I get into the apps again
Updated: sorry I didn't know there has been an app called "brevent", preventing apps from running in background. Just have calling problems.
nosiobadx said:
zacharias.maladroit said:
I can't write into system yet on nougat, that's why I went back to MM, flashed M-ROM 1.9.5 installed latest zach's kernel for 5.11, disabled Input boost and touch boost with kernel auditor, also flashed Govtuner zip. And smart temperature also, and I'm having good results regarding battery and heat as well.
Click to expand...
Click to collapse
Can you post the link for the Govtuner.zip your using please. Thanks a bunch
Click to expand...
Click to collapse
kgalv419 said:
nosiobadx said:
Can you post the link for the Govtuner.zip your using please. Thanks a bunch
Click to expand...
Click to collapse
All credits goes to the creator of this zip just sharing it cause download link isn't working In its post
Click to expand...
Click to collapse
nosiobadx said:
kgalv419 said:
All credits goes to the creator of this zip just sharing it cause download link isn't working In its post
Click to expand...
Click to collapse
Awesome Thank you so much!
Click to expand...
Click to collapse
Does anyone know where I can find the list of features for this Rom? Been trying to Google more information on the ROM but nothing is coming back ?
Sent from my Sony Xperia Z3+
r_diaz13 said:
Does anyone know where I can find the list of features for this Rom? Been trying to Google more information on the ROM but nothing is coming back ?
Click to expand...
Click to collapse
It's a stock Android N mod with root and google services. Nothing special
hanney said:
Some apps don't work correctly, and I don't know if this just happens to me but other people can't hear what I say through calling
Click to expand...
Click to collapse
You're right. Call has bug. The other side could not hear you sometimes. But I have a solution. Put it on audio output mode.