Hello. Please help me add a switch to the network settings menu to enable and disable frequency aggregation manually. Frequency aggregation works on the phone.
Related
i have a galaxy s plus.
i want to enable the 850 mhz band.
anyone know how?
i have a Galaxy S I9000, i'm supose it's similare:
On y phone, 850Mhz band is desactivated by default.
try on phone keyboard:
*#*#0011#*#*
You must arrive on a menu:
do back and go to Phone controle and Band Selection
Doing this enable band activation on software, if your phone's modem not enable to working with this band, the result is it's not working with the band frequency anyway...
I'm try this for enable USA 3g band on my I9000 from europe, and i'm able to activate band, but it's only partialy working (have 2100Mhz 3G (VTR) working with this, but not the 900Mhz/1900Mhz band used here by Movistar(Chile) for 3G.
it does not work. i see the menu but when i press
back, i do not get anywhere
My F180 keeps roaming to different cellular network, and this is bad because the network its roaming to is operating at 850 3G frequency, which the F180 does not support.
Does anyone know how to disable roaming?
When I go to "Settings", I can see "Global Roaming". Inside I think I need to go to "Roaming Network settings", and inside "Automatic" is chosen. I guess I need to change this to "Manual", but I don't know what to do then...
I live in Detroit,USA. I am using T-Mobile.My cell phone is Lg G3 Cat6. But I can not connect LTE. ( Only 3G ). Can you help me?
Make sure the APN is set to T-Mobile settings and if that doesn't work then it may not support the American LTE bands and you will be stuck in 3G.
I don't think the F460 supports T-Mobile's penta band set up, it may only work with a couple of them. Check their bands and then look in your service menu by dialing 5457#*460#
Hi, I am new to the forum and want to share my experience about LTE BandSelection.
As discussed in the previous thread, you can access to Verizon Hidden Menu called LTEBANDSELECTION. By default, Band2 Band4 Band13 are checked and Band5 is unchecked. However, from LG website LTE 3/7 is supported for Roaming, but those bands are not on the list.
I can confirm that at least Band3 is working because I am on a carrier that uses Band8 and Band3. The problem is that, when I try to change the LTE band selections above (ex: adding Band5 to the list), it seems that LTE3/7 is not working anymore. After changing it once, I only get 3G signal without any LTE. The only way that I can get the Band3 signal again is going back to the original stock rom (13b) again.
It is weired that there is no hidden menu to select Band3/7. Do you have any idea on this problem? Thanks!
hi all,
Have a question about unlocking the umts band 4(aws 1700) for a s20 sm-g9810 HK version. Hope someone can help me to sort it out.
Following the guides in this forum, I enabled the band using QPST and QXDM to write NV 1877. The white was successful, and the Samsung Band Selection app shows wcdma IV 1700(it wasn't
there before modifying NV). However, when I select the band or change network mode to 2G/3G, I can't make any call with Freedom Mobile, which is using UMTS 4 for voice.
Does anyone know if the hardware supports this band?
Thanks!