K this is getting old. A couple weeks ago while I was still running the stock install of my Sprint Galaxy Note II, after the update on april 28th ( or near there), my earpiece just quit working in the middle of a call. The speakerphone and bluetooth headset were still working but nothing out of the earpiece. I tried everything to get it working again, even so far as doing a factory reset and nothing worked. So I got a new one that worked for 2 days then the same thing.
SO I figure it was the software update. Rooted and put on [ROM][Team WHOMP!] Whompasaurus, which worked good for a week and now the same problem. I have seen one other instance of this happening to someone online but no solution. Any ideas would be much appreciated. Just so you know I have, rebooted, re-flashe the rom, plugged in headphones, rebound bluetooth, cleard cache and done everything short of a full wipe and restore... which I will not do every week.
Finally got it working
I finally got it working. I was just looking around the web and I found a forum that said to use *#0*# to test the functions on the phone and it worked after I tested the receiver. Could have something to do with the sequence I did it in so here it is.
1. Used headset for call.
2. Unplugged headset and used keypad to bring up consol *#0*#.
3. Tested "Speaker" then "Receiver" and earpiece started working normally again.
So glad I finally have some kind of a work around.
UPDATE:
That was also a temporary fix. Form what I could find online it seams that the problem was with the headphone jack and I had to have it replaced. Working for now so hopefully I won't have any problems with this one.
Hi everyone, hope someone can point me in the right direction. Flashed OmniROM on an HTC desire (bravo) and it's working great. Only problem is when making a call, no sound comes out of the earpiece. If I put it on speaker phone it's fine, and apparently when it's not on speakerphone the mic works fine, people can hear me on the other end, but I can't hear a thing. Suspect the radio is the problem here so need advice on which radio to use (especially for internet use too) and how to install it. I have Ext4 bootloader installed too. This is my interim phone after my Samsung Galaxy S2 died completely (will not power up since it died during normal operation), which looks like it would need a JTAG burn to fix, right after I successfully replace the USB board. Anyway, any help appreciated. Thank you.
Can it not be that the earpiece is simply broken?
Does it work for instance over Wi-Fi calling e.g.Skype? Can you get any sound to come out of it?
Was it working before you flashed the ROM? If you backup and flash different ROM or better yet back to stock, does it work?
Just want to do logic tests before concluding it's a radio issue, which I'm not sure it is.
So confirm above before playing about with radios as they carry a but more risk. To flash radios, you need to be S-OFF, and use fastboot commands. Check the md5 sum of the radio.img before flashing because a bad radio flash= proper brick.
There is no recommended radio, though latest one should generally be better. Depends on individual signal quality so different people get different results
Good point. Got around to thinking the same myself. Found a replacement speaker on ebay (local seller) which I ordered (it's cheap). Meanwhile searching the market for a speaker tester.
Desire adr6300 running cooldroid
old thread, but I have a similar but slightly different issue and it doesn't appear to be the radio
Cant hear anyone on call, they can hear me
Works on earphone - can hear caller no probs, they can hear me ok
If i switch to speakerphone during the seemingly silent call, as soon as some noise (voice or otherwise) is picked up from other end, then the speakers start screeching - quickly getting to max volume. Goes silent again if speakerphone option switched off.
Hadn't flashed anything when it started to my knowledge, but had been installing various things. Nothing significant to my recall.
Tried re flashing cooldroid after clearing caches - same
tried installing mildwild - same
reflashed radio (it is the latest and been on ages) - same
Cleared everything except sd data but including ext partition and reflashed coildroid - same.
Oh - audio tracks play fine :/
Help.
Slight update on this.
After trying different roms and reflashing the later radio:
Flashed an older radio on it that i had on it before - same.
Radio_32.56.00.32U_5.17.05.23
Radio_32.56.00.32U_5.17.05.08
Seems like mic (others hear me) ok when used normal, but I cant hear them
but some sort of feedback squeal when i put it on speaker voice does come through quietly along with the screeching (no its not the missus), the screeching only starts as soon as some noise is picked up through sending phone
When earphones connected (hence mic and speaker on phone disconnected) - all fine.
So possibly some sort of short in the ear speaker unless someone who knows the hardware better than me can suggest something else
(Do these have noise cancelling mic which is disabled when earphones are connected? - must look that up when I have some time again)
Update
it does seem to be simply a failed ear speaker
Update
Got around to replacing the ear speaker (less than £2 delivered from ebay)
SORTED
dead easy job - 10 minutes to replace and all ok now.
No sound through ear speaker now sorted
This is for ear phone - but shows how easy it is
Speaker is just under the top board - no cable just prongs and stickied in place.
http://morganbye.net/blog/2012/08/htc-desire-headphone-jack-fix/
Hello, I have recently discovered the forum and the section dedicated to Android head units; before reading a couple of threads, I used to think my unit was pretty decent, but with some of the mods / apps provided here, it is almost flawless now. Thank you guys for your effort.
I have been using my Pumpkin unit for a while and only recently I installed XposedMTC and CarService, along with RK3066 (which I think was overkill) in an attempt to fix the only issue that was puzzling me: not all of my steering wheel controls would work; I got my NEXT/PREV to work and I can see the keycode in CarService app, but I have 3 other keys that don't seem to be picked up by the unit. These are the PHONE ACCEPT / REJECT buttons and the other once (which is the speech-to-command function).
I'm very new to both the Android head units and the modding that is behind it, so sorry if I don't make sense.
I am having trouble understanding if it is software related, or if the connection in this wires is going outside the CANBUS plug wiring; by this I mean that maybe these 3 keys are sending signals somewhere else? I say this because while upgrading from my stock unit, one of the plugs was left disconnected, as it had no socket to connect to in the new radio.
I'm not sure if this is the right place to ask, sorry for any inconvenience, but if someone went through this and managed to fix it, I'll be thrilled if you let me know how; the unit is from Pumpkin, and the car is a Mazda 3 from 2010.
Thanks in advance.
Hey everyone. My note 2 gas given me many troubles, first the chip EMMC failed. I created a thread explaining the situation. Bootloop, recovery failed, etc. So I bought a phone that had a broken screen. I replaced the motherboard and everything was going fine but cellular signal was failing, I gave it back to the owner. (I also created a thread about it).
Now, I bought another phone with the broken screen. So I replaced the motherboard one more time. Everything works ok, cellular signal, wifi, camera (both front and back camera), wifi, speakers, etc. But I have a trouble with the microphone. When I'm on a phone call I can hear people but people can't hear me, unless I use the speaker then they can hear me. I suppose that the mic from the top of the phone is the one that is working when the speaker is turned on.
I've done some reading, and there are many solutions, cleaning the mic, factory reset, installing other ROM,etc. The mic isn't the problem. I tried the mic of my note 2 and the other mic too. The problem is present with both mics. (Both phones are the same variant by the way, GT N7100 international version).
The phone is on 4.1.2 Jellybean, I'm thinking on update to 4.3 first via Odin, if problem is still not solve then upgrade to 4.4 kit Kat via Odin as well. If problem persist, then flash a recovery via Odin and then install a custom ROM 5.1.1 and if the mic problem still not solved then flash a 6.0.1 custom ROM.
I don't know what else I should do concerning this issue. Any advices? Or solutions? Has anyone had this very same issue?
The mic doesn't work at all, I tried video recording and the only mic that works is the top one, not the bottom one. Voice recording doesn't work as well. Headphones does work. If I unplugged the headphones while having a phonecall the bottom mic still isn't working.
Hope you could give any advice or solutions! Thanks in advance.
Sorry for my English skills.
Did you try moving the swapping out the USB fix cable between both phones?
I doubt that it's a software problem because I have not come across a situation where a mic does not work on a particular stock rom.
audit13 said:
Did you try moving the swapping out the USB fix cable between both phones?
I doubt that it's a software problem because I have not come across a situation where a mic does not work on a particular stock rom.
Click to expand...
Click to collapse
Yes I did. Problem still there. I also did a factory reset. I'm thinking that at least one of those mics are working OK. I mean, it would be really really bad luck having the 2 microphone malfunctioning. My microphone was working fine before the EMMC chip crashed. After I replaced with other motherboard with no cellular signal it was working fine as well. This motherboard tho everything is working fine but both microphones.
Yes, that is weird. Maybe you need a new mic? That might be the cheapest solution.
excessdivide said:
Hello everyone,
Big thanks to the heavy hitters here that are making these units actually usable!
I received my Dasaita HA5217-V600 two weeks ago and thanks to having previously scoured these forums, I was able to install it, in my 2016 Toyota Corolla, with relative ease. Everything worked better than expected, and I had great bluetooth sound, strong WiFi connections, my door and A/C controls appeared on screen, my SWC all matched and decent FM reception. My bluetooth OBDII adapter is arriving this week so I'll have to report back on that.
Click to expand...
Click to collapse
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Thanks for the detailed write up. I just ordered mine. Px5 7 inch 2gb ram dasaita. Any tips for a newbie? I've been browsing the forums myself for the past couple of weeks and I'm aware of all the mods and custom ROMs etc. Just asking you if there's maybe any advice you wanna give on how I should proceed with the unit or just generally anything that might help.
Appreciate any reply
I have Dasaita/Hotaudio HA2100-v600 7" device and happy - it works here good!
@ Nasty_z: Stock rom & MCU and ModRom
excessdivide said:
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Click to expand...
Click to collapse
Hi, I'm a fellow Corolla owner in FL As well!
I just bought a Dasaita PX3 2GB RAM 16GB (Quad core vs your 8 core PX5 due to it being close to $300 flat on an ebay flash sale) and have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
-Where did you mount the GPS antenna?
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
-Anything unusual with your unit?
-Have you tested Waze and Google maps? Do they run stable?
-Does your unit pickup your wifi automatically when you startup the car?
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
gab2012 said:
Hi, I'm a fellow Corolla owner in FL As well!
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
Click to expand...
Click to collapse
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
I have a similar 9" unit.
Running Malaysk v5 ROM and MTCE v2.71 as the bluetooth for 2.75 didn't work well.
I do have the DAB+ aerial and app and it works ok however mostly I use Google music. I have no problems using Waze or copilot.
What I haven't been able to do is get my reversing camera to show on the screen. I have a wireless version and both halfs have leds that light up when the car is in reverse but no picture regardless of which connection I use.
Also I can't get it to connect to a ELM357 OBD2 dongle.
I've had the unit for 4 months and last week while driving to work the screen went black, the unit was still working it was just the screen. The next time I started the car the screen came back....weird.
Other then this the units ace!
excessdivide said:
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
Click to expand...
Click to collapse
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
gab2012 said:
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
Click to expand...
Click to collapse
Hello I have bought a Dasaita HA2039-S720 for Mitsubishi Outlander 2014. I have the same Issue with my Radio App. Everytime I open it, it goes in background. Kill it with the Task Manager can't stop the Music. I have to reboot the Device. I have MCU Version MTCE_HA_V2.75.1 and ROM px3-userdebug 7.1.2NHG47L eng.hct.20171206.143935 test-keys.
Did a system update realy fix your Problem? I noticed that this happend every time a station is scanned and saved. Delete the Cache and Programm Data from Radio App in the App section fixed the issue but you have no music then but white noise.
I have some Issues with apps in general. Sometimes Apps are crashing and did not load properly and stuck while loading.
My OEM Rear CAM Image is laggy and not very smooth too.
Today I tried to update die Rom with this Version HCT2_px3_7.1(20180206) but it failed. Don't know if it's the right one. The Device found this Image and promptet me to update. After a short loading screen a Faild message appeared on the screen and it showed an options screen. I inserted another SD CARD with the image of the update and choosed "update from SD or USB" but it failed again so I rebooted the system. I choose swipe in the beginning and after a reboot the system was in factory condition.
But can anybody explain me what went wrong and how to properly make a Rom and MCU update.
Thanx
Hey guys I just wanted to become a part of this I just purchased and installed this type radio along with the Bluetooth adapter for the cars computer. Hopefully I will soon get the ATSC digital antenna so I can watch TV when my wife goes in to shop for something that will supposedly: "only take a minute." I have to say the install was incredibly easy. Everything works very well and sounded great connected to my factory system of the 2013 Kia Optima. I did use the radio's subwoofer output and added a 300 watt powered Rockford Fosgate subwoofer. It all sounds amazing together. I attached two photos of the type of radio I purchased (or tried to. Kinda new here).
View attachment 4483442
View attachment 4483443
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Bradsr12 said:
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Click to expand...
Click to collapse
Hello
i don't know which model Focus you have. I have a Focus MK3 from 2012 and i just ordered this unithttps://nl.aliexpress.com/item/Dasaita-Android-8-0-4g-32g-Car-Radio-for-Ford-Focus-2012-2013-2014-2015-Multimedia/32889176494.html?spm=a2g0s.9042311.0.0.1e934c4diSRsuQ
and it comes with a canbus adapter and works great. i received it today and installed it. Everything works out of the box.
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Bradsr12 said:
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Click to expand...
Click to collapse
http://www.hot-audio.com/category/Ford-3.html
I tink they have a car specific unit for you too. Just check out their site. The benefits of these units is that it will fit perfect in your car and all cables and adapters are included...
Btw I have a v840-8 unit
Sent from my SM-G950F using Tapatalk
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
TBM2 said:
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
Click to expand...
Click to collapse
Awesome. Thanks for this info @TBM2
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Grims said:
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Click to expand...
Click to collapse
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
marchnz said:
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
Click to expand...
Click to collapse
Sorry, I'm just curious as I just got one for my car installed... but the internal microphone performance is horrible. The box came w/ an external microphone, but is there something i need to do to disable the internal microphone?
scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
Like any MTCD unit, first boot is approx 15-20 secs, with the unit sleeping thereafter resulting in 'instant' resume.
Read