Develop Bugs

With signal but dont make calls! NEED HELP!

Hello every one!
I got a 2 months a go, 1 gran duos gt-I9082L (brasilian version)
the phone restarts some times and have signal on 2 chips but dont make a single call! with bolth chips! =/
Im using android 4.1.2 / I9082LDCAMC1, but allready try a lot of difrent and orinial roms, but the problem still!
im not receeving incoming calls too! =/
Any one can help?
Tks all ready! and sory about the english!

If you are facing problems with different ROMs, download the latest firmware for i9082L and flash it on your phone through Odin
make sure you wipe data/cache/dalvik before the flash then reboot :good:
http://www.sammobile.com/firmwares/1/?model=GT-I9082L&pcode=-1#firmware
choose your country code and download orginal firmware
or download from here (rooted firmware by a trusted developer)
http://forum.xda-developers.com/showthread.php?t=2340562
don't flash ROM over it till you are sure it's compatible with i9082L
Hit Thanks if it works

iceyhotguy said:
If you are facing problems with different ROMs, download the latest firmware for i9082L and flash it on your phone through Odin
make sure you wipe data/cache/dalvik before the flash then reboot :good:
http://www.sammobile.com/firmwares/1/?model=GT-I9082L&pcode=-1#firmware
choose your country code and download orginal firmware
or download from here (rooted firmware by a trusted developer)
http://forum.xda-developers.com/showthread.php?t=2340562
don't flash ROM over it till you are sure it's compatible with i9082L
Hit Thanks if it works
Click to expand...
Click to collapse
tks man!
i will try whit this second link!
but i all ready try this one i think!
I9082LDCAMF1
will try again!
tks!
the modem link is broked by the way!

itestai said:
tks man!
i will try whit this second link!
but i all ready try this one i think!
I9082LDCAMF1
will try again!
tks!
Click to expand...
Click to collapse
some users were facing no service issue, related to network or calls, there's a patch for it in the 2nd link
Sent from my GT-I9082

The link is broked :/

itestai said:
The link is broked :/
Click to expand...
Click to collapse
Post it in thread and wait for the uploader or some i9082L user to upload the file for you
Are you still facing the problem after flashing new firmware?
-------------------------------------------------------------------
EDIT : link is not broken, the file host site is down, just wait for site to come online

im waiting for some one upload the right link!
with the rom, the problem still

itestai said:
im waiting for some one upload the right link!
with the rom, the problem still
Click to expand...
Click to collapse
The site is back online, try the same link again

iceyhotguy said:
The site is back online, try the same link again
Click to expand...
Click to collapse
i saw that! i try put the rom, everything looks great, but when i go to put the moden on odin, o got stuck on the odin...
nothing happens! any idea what is going on?

itestai said:
i saw that! i try put the rom, everything looks great, but when i go to put the moden on odin, o got stuck on the odin...
nothing happens! any idea what is going on?
Click to expand...
Click to collapse
Make sure you are doing this in right order,
1. boot phone in download mode (home + volume down + power)
View attachment 2287741
2. phone will ask you to press volume up to continue
3. once the phone says "Odin Mode" on top, and "Downloading..." in the middle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. connect your phone to your computer, and wait for odin to show device connected
5. choose the "Phone" option in Odin and choose the patch file. Make sure "Auto Reboot" and "F. Reset Time" are the only ones selected
6. Then press Start.
If this doesn't work, then I'm not really sure what the problem is

k! i will try with the phone button on odin!
i was trying with the PDA button!

itestai said:
k! i will try with the phone button on odin!
i was trying with the PDA button!
Click to expand...
Click to collapse
yea there's the problem, pda button is for when you are flashing new firmware or updating your system files
Phone button is for modem files
Let me know if it works, and don't forget to press Thanks
Sent from my GT-I9082

k, i dont make the moden iet couse the phone is working good, with no issues, but im think it will probably start to dont make calls, if that happens, i will do.
anyway, the rom posted here is working great!
--------
edit!
The phone some times got with signal but dont make and recieve calls.
I tryed put the modem with the PHONE button on Odin, and got stuck on boot.img
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> BcmCP.img
Any idea!? =/

[Q] Cricket Samsung Galaxy S III Back to Stock

I'm having trouble getting my Cricket Samsung Galaxy S III back to stock. It's currently on the 4.4.2 ROM from Samobile.com, and it won't pick up the Cricket network. So that's why I'm trying to go back.
I'm using Odin v3.09, but trying to flash to 4.3 keeps failing.
Look, I know this is the Sprint version forum, but I'm at my wits' end here. You guys seem to know what you're doing; that's why you develop for Android daily.
Here's a log from Odin;
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R530CVVUCMK3_R530CCRICMK3_R530CVVUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Also, the phone says "SW REV CHECK FAIL : Fused 2 > Binary 1".

Once on the 4.4.2 bootloader, your can NEVER Odin an older version. If it succeeded, it would've bricked your phone. You can flash any to You like, but never Odin a stock ROM earlier than 4.4.2.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

roirraW "edor" ehT said:
Once on the 4.4.2 bootloader, your can NEVER Odin an older version. If it succeeded, it would've bricked your phone. You can flash any to You like, but never Odin a stock ROM earlier than 4.4.2.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
Alright, I learned that the hard way. My phone works fine now on 4.4.2 for some odd reason; might be because I added the APN correctly.
Anywho, if I shouldn't use Odin, what should I use to flash with now? I wanna root 4.4.2 so I can use TriangleAway and get rid of KNOX.

Clocksmasher said:
Alright, I learned that the hard way. My phone works fine now on 4.4.2 for some odd reason; might be because I added the APN correctly.
Anywho, if I shouldn't use Odin, what should I use to flash with now? I wanna root 4.4.2 so I can use TriangleAway and get rid of KNOX.
Click to expand...
Click to collapse
You can use Odin to flash the latest Philz Touch Recovery and use its re-root in its settings. You can use Odin, you just can't every Odin anything older than ND8. You can Odin anything else that's not a stock ROM as normal.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

failed to flash frimware via Odin on samsung tab 3 sm-t311

hello guys
i got Samsung galaxy tab 3 sm-t311
Original frimware: t311xwuamg3 (UAE)
the firmware i try download
Model SM-T113
Model name GALAXY Tab 3 Lite
Country United Arab Emirates
Version Android 4.4.4
Changelist 1114920
Build date Tue, 30 Aug 2016 07:30:12 +0000
Security Patch Level 2016-09-01
Product code XSG
PDA T113XXU0APH5
CSC T113OJV0API1
from sam mobile , when i try odin that what happen with me
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1101)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
and now got bricked and dhow me (frimware upgrade encountered an issue . plz select recovery mode in kies and try agian)
any help plz???
thx

when the tab about to get flashed the new firmware ..... the loading bar is run for a bit then tell failed as in pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok, so you have SM-T311 (Galaxy Tab 3 8.0 inch, 3G version). Confirmed by the photograph.
Why are you trying to download SM-T113 (Galaxy Tab 3 Lite 7.0 inch) firmware to it?
As long as you can enter into Download mode (what is seen in the photo), you can use Odin to flash some correct firmware (e.g. TWRP, then some Android image).

onetransistor said:
Ok, so you have SM-T311 (Galaxy Tab 3 8.0 inch, 3G version). Confirmed by the photograph.
Why are you trying to download SM-T113 (Galaxy Tab 3 Lite 7.0 inch) firmware to it?
As long as you can enter into Download mode (what is seen in the photo), you can use Odin to flash some correct firmware (e.g. TWRP, then some Android image).
Click to expand...
Click to collapse
i was dizzy when i download and flash it .... i tried asked moderator to delete it but can't be deleted the thread cuz when i read it again i realize that i flashed the wrong firmware .....
i have 2 problems
1- i want the latest firmware suit middle east area ( at least 4.4.2) but i didn't found official one on sammobile
2- sammobile closed his free download firmware and i cant download from regular download ( just premium)
any help in that!!!
thx for answer

speedman2202 said:
i want the latest firmware suit middle east area ( at least 4.4.2) but i didn't found official one on sammobile
Click to expand...
Click to collapse
You can download firmware from Samsung-Updates dot com (I can't post links ). There is none for Middle East, but there is for your device: T311XWUAMG3. It will download at low speed, but it does work.
As an alternative, you can flash TWRP via Odin, then install some alternative Android, like CM13, straight from TWRP.

onetransistor said:
You can download firmware from Samsung-Updates dot com (I can't post links ). There is none for Middle East, but there is for your device: T311XWUAMG3. It will download at low speed, but it does work.
As an alternative, you can flash TWRP via Odin, then install some alternative Android, like CM13, straight from TWRP.
Click to expand...
Click to collapse
i tried another website (samsung-firmware(dot)org) and download 4.4.2 kitkat (france baseband) and works fine with me now
thanks so much for try helping me .... i appreciate that ^^

<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry for the bother, how do I fix this? I tried different Odin versions, different regions firmwares and still can't bypass this "system.img" FAIL. I tried to reboot, but it tells me to recover using Kies. But Kies doesn't support this model..

corrupted partitions samsung note 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to edit with ODIN a rom file with 3 files with pit files, and several roms to a file.ma nothing
tried different versions of odin but it always returns me fail ..
the cell tells me that the operating system is absent but manages to get into recoveri mode (I have a twrp) and in dowland mod.
How can I solve?

You are flashing the latest stock ROM from sammobile or updato?
Post the login log so we can see the login errors but don't post any IMEI or personal info.

audit13 said:
You are flashing the latest stock ROM from sammobile or updato?
Post the login log so we can see the login errors but don't post any IMEI or personal info.
Click to expand...
Click to collapse
this is the rom GT-N7105_HUI_1_20140630140530_aqfc04ei3v

Posting the Odin log is more useful that the ROM version.

audit13 said:
Posting the Odin log is more useful that the ROM version.
Click to expand...
Click to collapse
I'm new so I can not screen up to 10 messages. I write the log by hand
log
<ID:0/008>Added
<OSMS>Enter CS for MDS..
<OSMS>Check MDS..Do not unplug the cable..
<OSMS>Please wait..
<OSMS>Checking MDS finisched Successfully..
<OSMS>Leave CS..
<ID:0/008>Odine engine v(ID:3.120,3)
<ID:0/008>File analisys..
<ID:0/008>Initiazion..
<ID:0/008>Get pit for mapping..
<ID:0/008>Firmware uptade start..
<ID:0/008>SingleDowland.
<ID:0/008>sboot.bin
<ID:0/008>Fail
<ID:0/008>
<ID:0/008>Complete(write)operation failed.
<OSMS>All threads completed. (succed 0/failed 1)

The sboot.bin file is the bootloader. This file is failing to flash because you need to usb a different usb cable, a different usb port, the bootloader in the phone is newer than the bootloader in the rom you are trying to flash, the rom you are flashing is not made for the phone, or a combination of these things.
Did you try the latest ROM from sammobile.com or updato.com?

audit13 said:
The sboot.bin file is the bootloader. This file is failing to flash because you need to usb a different usb cable, a different usb port, the bootloader in the phone is newer than the bootloader in the rom you are trying to flash, the rom you are flashing is not made for the phone, or a combination of these things.
Did you try the latest ROM from sammobile.com or updato.com?
Click to expand...
Click to collapse
now I have downloaded the rom from sammobile.com and it is this
N7105XXUFNE3 - GALAXY Note Ⅱ GT-N7105 OMN Italy (Vodafone)
Note GALAXY Ⅱ - Android 4.4.2
I changed usb port and cable .. I tried all the ports of my pc.
my pc has windows 10
this is the log
log
<ID:0/005>Added
<OSMS>Enter CS for MDS..
<OSMS>Check MDS..Do not unplug the cable..
<OSMS>Please wait..
<OSMS>Checking MDS finisched Successfully..
<OSMS>Leave CS..
<ID:0/005>Odine engine v(ID:3.120,3)
<ID:0/005>File analisys..
<ID:0/005>SetupConnection..
<ID:0/005>Initiazion..
<ID:0/005>Get pit for mapping..
<ID:0/005>Firmware uptade start..
<ID:0/005>NAND Write Start!
<ID:0/005>SingleDowland.
<ID:0/005>sboot.bin
<ID:0/005>Fail
<ID:0/005>
<ID:0/005>Complete(write)operation failed.
<OSMS>All threads completed. (succed 0/failed 1)

The model number in download mode is the gt-n7105?
Tried flashing with Odin 3.07? Tried with Windows 7?

yes it's gt N7105, i tried with odin 3.07 but i never tried with 7

I always flash using Odin 3.07, Win7 x64, USB 2.0 ports, and the original Samsung USB cable for any phone before the Note 4. I'm not sure if these things make a difference but it's always worked for me.

Have you ever heard of this samsung octopus software? could it be useful for my situation?

samsung s9 sm-g960u cant update

just a got a new phone samsung s9 g960u..seems having issues to update official android 9...keep saying “processing failed“..any ideas??

Flash the firmware with odin, download from sammobile or Frija downloader here on xda

I cant seem to match my firmware..it says model sm-g960u, but country uae.....

deadbody2014 said:
I cant seem to match my firmware..it says model sm-g960u, but country uae.....
Click to expand...
Click to collapse
the 960u is mainly a US model as it uses the snapdragon processor. Other than baked in carrier apps, you shouldnt really be remiss in flashing any of them.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can anyone pls guide me to corect firmware i need pls.....

Pick one that says u or u1 pretty much any should work and if u get the u1 to work it'll be the same but no bloatware I think u can even use the w firmware at least you could on s8

deadbody2014 said:
can anyone pls guide me to corect firmware i need pls.....
Click to expand...
Click to collapse
this is where they are all stored.
g960u firmwares
https://www.sammobile.com/firmwares/galaxy-s9/SM-G960U/
g960u1 firmwares
https://www.sammobile.com/firmwares/galaxy-s9/SM-G960U1/
there is a firmware downloader tool that an xda member made and its crap tons faster than what this site offers for speed, but you have to install a small program, and if youre just downloading one, it might not be necessary. But holy crap is the downloader tool faster, i have it on my home computer. Cant recall what its called off the top of my head, maybe someone can chime in with it.
EDIT: here is the downloader tool thread. Trust me when i tell you that installing this tool and figuring out how to use it is faster than waiting for the firmware to dl from the site directly
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647

I'm bit confused here...u guys saying to use u1 firmware while my phone is g960u only..will it work? also what country code or region should I select while downloading cause I cant find uae there...

deadbody2014 said:
I'm bit confused here...u guys saying to use u1 firmware while my phone is g960u only..will it work? also what country code or region should I select while downloading cause I cant find uae there...
Click to expand...
Click to collapse
the U1 firmwares are usually debloated versions of the U firmwares. Carriers inject tons of crap into the image and installs junk like games or carrier apps that let you see your data usage etc etc, the U1 versions dont have all that garbage in them. Also, you can flash any g960u or g960u1 firmware on any g960u, they arent region specific. Can you post up your entire firmware version in a reply? I didnt see a UAE specific firmware in the listing at all. I bought a UAE Galaxy A8 and flashed a German region firmware, Russian region and UK region as well with no issues. These phones dont require a specific region firmware to accept a GSM card and change the APNs and so forth in order for them to lock on the network and function as they should

https://ibb.co/Wv4HhyS
https://ibb.co/D1Kr3z8
https://ibb.co/K9vGr7n
ok screenshot is given from my phone...pls let me know which firmware my phone will accept
how u post image in this forum from imgbb site?

deadbody2014 said:
https://ibb.co/Wv4HhyS
https://ibb.co/D1Kr3z8
https://ibb.co/K9vGr7n
ok screenshot is given from my phone...pls let me know which firmware my phone will accept
how u post image in this forum from imgbb site?
Click to expand...
Click to collapse
You already been told which firmwares will work, read the post above again

*Detection* said:
You already been told which firmwares will work, read the post above again
Click to expand...
Click to collapse
still having issues to flash the firmware...here is the......odin v3.13 log
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4877 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)

ok guys update... successfully updated the s9 to android 9 with patched odin 3.13.1.....but issues now its not seeing my sim card....where did i messed up?

Firmware does seems region specific as its not accepting my gsm card..tried one g960u1 cct us open firmware didnt work..i think i need to play around with some other firmware..will update n let u know guys..ty

deadbody2014 said:
Firmware does seems region specific as its not accepting my gsm card..tried one g960u1 cct us open firmware didnt work..i think i need to play around with some other firmware..will update n let u know guys..ty
Click to expand...
Click to collapse
Are you flashing all 4 parts of the firmware together?

Yes

*Detection* said:
Are you flashing all 4 parts of the firmware together?
Click to expand...
Click to collapse
Yes