Related
What is Kali NetHunter?If you don't know what NetHunter is read this: https://www.kali.org/kali-linux-nethunter/
Q: Why don't I flash the original nethunter version by keeping my current kernel?
A: To get Nethunter fully work you need a kernel that supports its features, such as put a wireless adapter in monitor mode or perform a HID Keyboard attack
Special Patches included in this kernel:
mac80211 injection patch, to put wireless adapters in monitor mode; note that built-in wireless chipset doesn't support monitor mode and you have to use external wireless adapter (see supported wireless cards here)
HID patch, to perform HID keyboard attacks
CD-ROM patch, to emulate CD-ROMs in DriveDroid
Warning!!!:
This version is not tested by me (since I don't have a hono 5x ) but it's tested by another user that told me it works, so, if it doesn't blame him not me
Disclaimer:
Code:
I'm not responsable for bricked devices :( , dead phone chargers,
nuclear explosions or global warming.
Flash it at YOUR OWN RISK.
Required Downloads:
Download any CM based ROM
Download any custom recovery (like twrp)
Download my Nethunter "ROM" here: https://androidfilehost.com/?w=files&flid=118871 All future updates will be in that folder
How to Install (CM/RR):
Note: When you flash my zips, don't check "zip signature verification" box in TWRP recovery
1) Install TWRP
2) Enter in TWRP recovery
3) Flash any CM based (like cm, rr, aicp...) ROM
4) Optional: flash Google Apps after flashed a cm based recovery
5) Flash NetHunter zip
7) Reboot
8) Open Nethunter app and go to menu<chroot manager<install chroot and download the full chroot, for devices which have more storage available, or minimal chroot, for devices which have less space available
9) Close NetHunter app and reopen it to complete the installation
10) Enjoy
Important: I called NetHunter "ROM", but it isn't a ROM, so, you don't have to wipe system partition.
Note: report only bugs related to NetHunter and not to cm based roms
Kernel Source Code:
https://github.com/DeadSquirrel01/android_kernel_huawei_kiwi branch cm-13.0
Now you can build it by youself on official HetHunter source page
You Need this https://github.com/offensive-security/kali-NetHunter
and this https://github.com/offensive-security/nethunter-devices (branch experimental for now )
For Any questions contact me at: [email protected]
Credits: @jcadduono, binkybear and offensive security team for NetHunter source code
XDA:DevDB Information
[MOD] Kali NetHunter for Honor 5x, Kernel for the Honor 5X
Contributors
DeadSquirrel01
Kernel Special Features: mac80211 Packet Injection Patch, HID gadget USB/Mouse Patch, CD-ROM Patch for emulate CD-ROMS in DriveDroid
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-10-01
Created 2016-10-01
Last Updated 2016-10-01
already using it NYC work
Will someone explain what this does?? I tried the link but couldn't get much out of it.... Thnx
Sent from my KIW-L21 using Tapatalk
Faheemarif252 said:
Will someone explain what this does?? I tried the link but couldn't get much out of it.... Thnx
Click to expand...
Click to collapse
Well, Mate its actually used for pentesting or penetration testing of wifi or wireless networks... google it for detail information.
mumith3 said:
Well, Mate its actually used for pentesting or penetration testing of wifi or wireless networks... google it for detail information.
Click to expand...
Click to collapse
Yep, it's for pentesting
it is a amazing kernel, wow.
kaankulahli said:
it is a amazing kernel, wow.
Click to expand...
Click to collapse
I know
Gonna try it
Kali Linux on Honor 5X! This is amazing!
Downloaded and flashed on KIW-L22 - On Tipsy OS - AOSP and AOKP (CM Based) - Initial boot took a while longer than normal, got a boot loop first, but it came back up after cache/dalvik wipe
Kali chroot manager stuck in "Checking" even after 10 minutes though
Edit: Lost root on installing this and didn't notice it, and busybox too.....reinstalling SuperSU through TWRP is not bringing it back root access either, so cannot install busybox too......nethunter app returned an error for not getting root access and no busybox installation!
PS: In love with the boot animation!!
nandakalyan said:
Downloaded and flashed on KIW-L22 - Kali chroot manager stuck in "Checking" even after 10 minutes though
1. On Tipsy OS - AOSP - working fine! Initial boot took a while longer than normal, got a boot loop first, but it came back up after cache/dalvik wipe
2. On AOKP (CM based) - Flash and wipe cache/dlavik, took a while longer but booted up normally, but I guess it will settle
Still trying to figure out how and what to use it for but just wanted to report back that the flashing process went well!!
PS: In love with the boot animation!!
Click to expand...
Click to collapse
mmm, stucking in checking it's very strange. Maybe compile a full zip here https://github.com/offensive-security/kali-nethunter (you have to clone
https://github.com/offensive-security/nethunter-devices, too (branch experimental) then for build with full chroot, just type:
$ python build.py -d kiwi --marshmallow --release v1.0 --rootfs-full
Anyway i will upload the zip with full chroot once i finish my cm14 port for a5
DeadSquirrel01 said:
mmm, stucking in checking it's very strange. Maybe compile a full zip here https://github.com/offensive-security/kali-nethunter (you have to clone
https://github.com/offensive-security/nethunter-devices, too (branch experimental) then for build with full chroot, just type:
$ python build.py -d kiwi --marshmallow --release v1.0 --rootfs-full
Anyway i will upload the zip with full chroot once i finish my cm14 port for a5
Click to expand...
Click to collapse
Thanks man, I wish I knew enough to compile and run things on github just edited by previous post.....it seems it got stuck because of no root access and busybox missing. Lemme know if i can test things out for you, glad to be of any help that way!
---------- Post added at 07:52 PM ---------- Previous post was at 07:12 PM ----------
OK, just figured it was me being a bit duh on the whole thing! I just reinstalled the whole ROM, and flashed this again. Installed SuperSU from playstore (it went missing after installing this) and things are back to normal.....now downloading full chroot! Hurray!
[/COLOR]OK, just figured it was me being a bit duh on the whole thing! I just reinstalled the whole ROM, and flashed this again. Installed SuperSU from playstore (it went missing after installing this) and things are back to normal.....now downloading full chroot! Hurray![/QUOTE]
Strange, the zip should include SuperSU
Hi,
where can I find the full chroot file (~ 750Mo), I want to download it manually
+
Why "wifite" does not recognize my hama adapter with Ralink RT2500 chipset?!
It is identified but when I choose the interface, it still returns the menu of choice
thanks for your help
panther2005 said:
Hi,
where can I find the full chroot file (~ 750Mo), I want to download it manually
+
Why "wifite" does not recognize my hama adapter with Ralink RT2500 chipset?!
It is identified but when I choose the interface, it still returns the menu of choice
thanks for your help
Click to expand...
Click to collapse
You can download chroot here:
https://build.nethunter.com/kalifs/
Regarding your adapter, read this: https://github.com/offensive-security/kali-nethunter/wiki/Wireless-Cards
Unlucky, your adapter does not support nethunter
DeadSquirrel01 said:
You can download chroot here:
https://build.nethunter.com/kalifs/
Regarding your adapter, read this: https://github.com/offensive-security/kali-nethunter/wiki/Wireless-Cards
Unlucky, your adapter does not support nethunter
Click to expand...
Click to collapse
Thanks bro
I even tried the alfa rtl8187l chipset without any result,
The problem is the low current for the adapter from the phone,
The usb hub with an external power supply maybe solves the problem, but it is not practical for a displacement
thanks again DeadSquirrel01
Sent from my KIW-L21 using XDA-Developers mobile app
panther2005 said:
Thanks bro
I even tried the alfa rtl8187l chipset without any result,
The problem is the low current for the adapter from the phone,
The usb hub with an external power supply maybe solves the problem, but it is not practical for a displacement
thanks again DeadSquirrel01
Sent from my KIW-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
For this i dunno, i'm not an elctronic expert ^^
DeadSquirrel01 said:
For this i dunno, i'm not an elctronic expert ^^
Click to expand...
Click to collapse
I must choose
kalifs-armhf-full.log
kalifs-armhf-full.sha512sum
kalifs-armhf-full.tar.xz
for KIW-L21?
panther2005 said:
I must choose
kalifs-armhf-full.log
kalifs-armhf-full.sha512sum
kalifs-armhf-full.tar.xz
for KIW-L21?
Click to expand...
Click to collapse
The .tar.xz one
Hey all,
so i flashed the nethunter zip with no hiccups.
However, now my wifi wont connect.
Does anyone know what might be the problem?
A custom Kernel for LineageOS 7.1.1 based on the ideas and experiences of SunKernel corona (StockKernel) for Xperia Z5 series
XDA:DevDB Information
SunKernel Pedigree Z5 for LineageOS, Kernel for the Sony Xperia Z5
Contributors
zacharias.maladroit
Kernel Special Features: FauxSound, KCAL, reworked thermal engine, fast camera, etc.
Version Information
Status: Beta
Current Beta Version: 1.3
Beta Release Date: 2017-03-14
Created 2017-03-14
Last Updated 2017-08-30
Reserved
Changelogs:
14.1_I
initial release - Features:
Click to expand...
Click to collapse
14.1_I.2
changes ...
Click to expand...
Click to collapse
14.1_I.3
add throttling for orientation sensor input events (most likely NOT needed) to cut idle cpu high load of 15-20%
Click to expand...
Click to collapse
14.1_I.4
removed lots of sources for log-spam (dmesg/kernel-log)
BCL<-->KTM interface for BCL (battery_current_limit) driver is now used, faster, more reliable (less overlapping) and better hotplug during thermal events, etc.
more reliable bcl mitigation due to fresh SoC value, allowing frequency-based mitigation even with BCL set to off
MUCH improved sound output
more reliable sound playback
Click to expand...
Click to collapse
Reserved
Kernel Releases (Betas for now):
Link to custom LineageOS 14.1 build (patchlevel March 5th 2017)
not sure what differs between this and the other builds:
https://drive.google.com/open?id=0BykGGWB96CBQR1VIb3QtdGpsTmM
I initiated the fetch of the repo files via
lunch lineage_sumire-userdebug
and added the blobs repo,
then restarted the build ...
From now on
both LineageOS and Resurrection Remix are unified builds that work on Single SIM and Dual SIM devices - no separate kernel or ROM needed !
Resurrection Remix: already IS the unified build (thread is currently parked at the General Subforum: Resurrection Remix 5.8.2 for Xperia Z5 (unified build) )
LineageOS: please download the unified LineageOS builds from olivier: lineageOS ROM (as mentioned at: LineageOS thread )
those are NOT boot-tested but should work (need testing + feedback)
Reserved (3)
Notes:
The preamp of FauxSound or the actual sound/soc driver state seems to be a bit "mushy",
thus the white noise (swoosh-ing, hiss-ing) is a bit high - reduce headphone amp by 10 or 15 (-10 or -15) so that you get a clear and well-defined output,
it really depends on your headphones - with in-ear it is most likely more noticable.
This was with unmodified "stock"/"upstream" lineageOS kernel source and with a bit patched up - so nothing I can and will change
Kernel source:
https://github.com/zachariasmaladro...kami_r2/commits/Sun-Kernel_Pedigree_cm-14.1_I
Thanks, I hope you don't forget dsds variant.
It is a pleasure to have SunKernel in LineageOS.
Thanks @zacharias.maladroit
I will try after released stable LineageOS for dsds and SunKernel.
Flashing lineage and kernel, looking forward to try it
Thanks for upload
s.hossein said:
Thanks, I hope you don't forget dsds variant.
Click to expand...
Click to collapse
you have an up-to-date boot.img for dsds device ?
if yes, please upload
Thx! But After flashing this Kernel i couldnt Boot up. Stuck ar Boot Animation. But the Animation did not stopped.
Same here, bootloop, can u look up to this?
We are so glad you put efforts in custom kernel for lineage, looking forward for an update
zacharias.maladroit said:
you have an up-to-date boot.img for dsds device ?
if yes, please upload
Click to expand...
Click to collapse
I think the tree sources are unified so is there a need for special kernel for dsds? I'll try this one on my E6683.
stipi69 said:
Same here, bootloop, can u look up to this?
We are so glad you put efforts in custom kernel for lineage, looking forward for an update
Click to expand...
Click to collapse
please update to the lineageOS builds from Olivier,
unless he has uncommitted changes locally in his repos - there are no changes,
my lineageOS build is at patchlevel March 5th 2017,
so with recent changes the kernel (more precisely the ramdisk) might be incompatible with the old builds from @Myself5
balrajs99 said:
I think the tree sources are unified so is there a need for special kernel for dsds? I'll try this one on my E6683.
Click to expand...
Click to collapse
it might work, but you most likely run into a bootloop, too, if you're not using latest lineageOS builds (those from Olivier)
In this minute i downloaded fresh update, flashed in this order:
1. lineage-14.1-20170316-UNOFFICIAL-sumire
2. open_gapps-arm64-7.1-nano-20161104
3. UPDATE-SuperSU-v2.78-20160905010000
4. Z5_SK_Enf_v14.1_I.3_sum
lineage from olivier from below link:
https://dl.olivierk.at/sumire/lineage-14.1/
lineage-14.1-20170316-UNOFFICIAL-sumire
i still get bootloop, scren is dimed, lineage animation keeps going for couple of secs, screen goes bright and bootloop from there on, waiting 10+ minutes now... maybe old superuser zipfile for this task? dont know realy, will make clean install
zacharias.maladroit said:
it might work, but you most likely run into a bootloop, too, if you're not using latest lineageOS builds (those from Olivier)
Click to expand...
Click to collapse
Yes, on latest build by oliver it ran into bootloop.
actually this goes into bootloop, flashed latest olivier's lineageos.
edit : is there any proper order of flashing ? and can you share lineageos build that you are on ?
@zacharias.maladroit: Thank you a lot for your work. We should be very thankful to every developer on the Z5!
Just gave your Kernel a try on latest olivier's lineageos (0316). Got a bootloop. After 20 minutes, I did a power reset and dirty reflashed latest olivier's lineageos (0316) via TWRP. Telephone was functional again.
L33Tgod said:
actually this goes into bootloop, flashed latest olivier's lineageos.
edit : is there any proper order of flashing ? and can you share lineageos build that you are on ?
Click to expand...
Click to collapse
yes, currently uploading
I'd install LineageOS + gapps (opengapps),
go through all steps,
then go into TWRP, make a backup and attempt to flash the kernel.
I haven't flashed the ROM via zip,
I flashed it via the .img files and fastboot since the updater-script seemed to cause trouble ...
Link to custom LineageOS 14.1 build (patchlevel March 5th 2017)
not sure what differs between this and the other builds:
https://drive.google.com/open?id=0BykGGWB96CBQR1VIb3QtdGpsTmM
I initiated the fetch of the repo files via
lunch lineage_sumire-userdebug
and added the blobs repo,
then restarted the build ...
Click to expand...
Click to collapse
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)
Thanks
zacharias.maladroit said:
yes, currently uploading
I'd install LineageOS + gapps (opengapps),
go through all steps,
then go into TWRP, make a backup and attempt to flash the kernel.
I haven't flashed the ROM via zip,
I flashed it via the .img files and fastboot since the updater-script seemed to cause trouble ...
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)
Thanks[/QUOTE]
I flashed the rom by flashing pixn kernel then booting into twrp when purple led comes on and it flashes rom normaly and to access twrp later i have to use your stock kernel and type fastboot boot boot.img and it can go into recovery, but can't flash lineageos because of that error 7.
Click to expand...
Click to collapse
L33Tgod said:
I flashed the rom by flashing pixn kernel then booting into twrp when purple led comes on and it flashes rom normaly and to access twrp later i have to use your stock kernel and type fastboot boot boot.img and it can go into recovery, but can't flash lineageos because of that error 7.
Click to expand...
Click to collapse
yeah, that's why I wrote:
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)[/QUOTE]
might be that upstream changed the content of updater-script,
that's why I ask for a working variant ;)
Click to expand...
Click to collapse
ATTENTION!
Code:
[COLOR="red"]!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA! FLASH AT OWN RISK !!![/COLOR]
Introduction
This ROM was created for personal use. It was compiled from last sources with some personal changes and bug fixes. It's based on Lord Boeffla's kernel for LineageOS 15.1 ROM with all Kali NetHunter features included. Unfortunately Lord Boeffla stopped developing for Android so it's possibly the last available kernel from him. This ROM was tested on OnePlus 3T LineageOS 15.1 clean installed ROM with NanoDroid microG and MagiskSU.
Click to expand...
Click to collapse
Features
based on boeffla kernel with config app features support
mac80211 packet injection
usb hid
SYSTEM V support for PostgreSQL & msfconsole functionality
usb bluetooth
usb dongle modem support
modprobe support
built-in drivers for Ralink RT3070I & RTL8192CU chipsets
usb dvb- & radio-receivers support
NetHunter app with last changes & fixes
drive droid v.1.38 (older version) with cd-rom & usb-rw support
binkybear-terminal with notification bar support
other NetHunter's features
Installation instructions
Boot to TWRP recovery.
Flash the nethunter-oneplus3T-los-oreo-kalifs-full.zip
Reboot to system.
Run NetHunter App and apply all requirements & give it root privileges.
Launch DB Feed in SearchSploit section to initialize the exploits db.
Launch Android Terminal & give it root privileges.
Run 'apt update && apt dist-upgrade -y' command to get the latest updates.
Launch other apps to set them up.
Special installation instructions
There are some "issues" I've discovered during the compiling and installation. I don't know if they are general or just specific one and depends on using NanoDroid microG and MagiskSU. But as it is.
1. All apps removes from /data/app/ after ROM installation complete and I have to manually install them to make everything works. So I've attached all apps in the Download section if anybody will face the same issue.
P.S. This issue was fixed in last commits from kali-nethunter git. So I've recompiled it from sources and added to nethunter installer. But haven't tested.
2. After the first clean installation of NetHunter with built in kernel Boeffla Config App can't sometimes to initialize the kernel. In this case you should boot to TWRP recovery and flash standalone kernel's zip. After that everything should work's great.
Downloads
Downloads:
NetHunter Full ROM Installer
NetHunter's Apps
Boeffla-LOS-15.1-NH-Kernel
Sources:
kali-nethunter
nethunter-devices
nethunter-app
boeffla-kernel-los-nethunter-oneplus3T
Thanks to/Credits
Code:
[URL="https://www.boeffla.de/"]Lord Boeffla[/URL]
[URL="https://www.offensive-security.com/"]Offensive Security[/URL]
[URL="https://lineageos.org/"]LineageOS[/URL]
[URL="https://github.com/binkybear"]BinkyBear[/URL]
[URL="https://github.com/pelya"]pelya[/URL]
[URL="https://github.com/Re4son"]Re4son[/URL]
[URL="https://github.com/kimocoder"]kimocoder[/URL]
XDA:DevDB Information
OnePlus3T LineageOS 15.1 NetHunter, ROM for the OnePlus 3T
Contributors
flypatriot
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: LineageOS 15.1
Version Information
Status: Testing
Created 2019-04-05
Last Updated 2019-04-11
Reserved
Changes at 2019.04.05:
Replaced NetHunter App with last build from Re4son.
Removed modprobe_fix script and how-to-use-it section from installation guide. We don't need it anymore (all thank's to Re4son).
Rebuild NetHunter installer with new App.
Changes at 2019.04.11:
Fixed bluetooth doesn't power on issue.
Added new compiled chroot with last fixes and updates.
Fixed issue with app's installation in android oreo.
thanks for share :good:
Does the monitor mode work without an external antenna?
jorge705 said:
thanks for share :good:
Does the monitor mode work without an external antenna?
Click to expand...
Click to collapse
No. I was searching a lot of time for custom firmware with monitor mode and packet injection support for QCA6174 model but there is nothing at the moment. So you should use external adapters from recommendation list in official Kali wiki.
It would be pretty neat, if the rom would run on the Oneplus 3 as well... :x
UsPdSr said:
It would be pretty neat, if the rom would run on the Oneplus 3 as well... :x
Click to expand...
Click to collapse
I was thinking about 3 model in the beginning of developing but the thing is I can't publish untested roms. And I don't have a OnePlus 3 model to test everything by myself. But if you want I can compile it just for you. But I can't give you any guarantees.
It would be greatly appreciated if you could compile it for op3 pie, thanks anyway:good:
DoN LoUhI said:
It would be greatly appreciated if you could compile it for op3 pie, thanks anyway:good:
Click to expand...
Click to collapse
You can check Havoc based kernel published here https://forum.xda-developers.com/on...nel-kali-nethunter-oneplus-3t-t3507816/page27 (see last comments from MrM0NS73R).
flypatriot said:
You can check Havoc based kernel published here https://forum.xda-developers.com/on...nel-kali-nethunter-oneplus-3t-t3507816/page27 (see last comments from MrM0NS73R).
Click to expand...
Click to collapse
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
DoN LoUhI said:
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
Click to expand...
Click to collapse
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
flypatriot said:
I was thinking about 3 model in the beginning of developing but the thing is I can't publish untested roms. And I don't have a OnePlus 3 model to test everything by myself. But if you want I can compile it just for you. But I can't give you any guarantees.
Click to expand...
Click to collapse
I would gladly be the tester if you don't mind the additional work.
We could talk this over Pm or another messaging app if you prefer.
Also congrats to the the successful implementation of your work in the Nethunter repository!
it is compatible with my RTL8188EU ?
flypatriot said:
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
Click to expand...
Click to collapse
That great man, I've been using his kernel too on oos Oreo and it was awesome. I hope he would make a build for stock pie as well.
[TWRP]
Failed to install Kali Nethunter!
Updater process ended with ERROR: 1
why?
net hunter
What OS/Kernel/packages combo is neded to get it to work on the 1+3T ?
You have to to make sure you magisks is working or super su before you flash the kalinethuner zip. i had the same problem
i got kalinethunter running with chroot installed but i dont have the nethunter terminal anyone else got a fix for this ?
Can i Flash Nethunter Kernal for OnePlus 3T nougat to OnePlus 3T Android pie? if no then how to get Nethunter kernal for OnePlus 3T Android 9 pie ?
please explain
without any rom installed this Nethunter Rom is not being install, while Having Havoc 2.xx installed this rom is got installed but issues.
is it important to install this rom over other Rom?
is it compatable with Havoc 2.6?
flypatriot said:
No. I was searching a lot of time for custom firmware with monitor mode and packet injection support for QCA6174 model but there is nothing at the moment. So you should use external adapters from recommendation list in official Kali wiki.
Click to expand...
Click to collapse
can you try this tutorial? pls :crying:
https://github.com/The-Cracker-Tech...ki/How-to-enable-monitor-mode-in-all-devices?
DoN LoUhI said:
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
Click to expand...
Click to collapse
flypatriot said:
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
Click to expand...
Click to collapse
See the last post in this thread.. it's stock 9.0.3 kernel with WiFi adapter drivers and other nethunter features.
https://forum.xda-developers.com/oneplus-3/development/kernel-coconut-kernel-oos-oreo5-x-x-t3902040
End of Life Nethunter Kernel for Samsung Galaxy S7 (SM-G930F/FD) LineageOS 16.0
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G930F here.
Installation:
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_LineageOS16.0_v*.img
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository it have all apps which are needed to get fully working Nethunter (Another version of Nethunter apk link)
6. Install kalifs-armhf-*.tar.xz by Nethunter manager
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Now you have Nethunter on your LineageOS 16.0 ROM.
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
If you need LineageOS 15.1 kernel version is too available as version 0.1 in downloads.
XDA:DevDB Information
[KERNEL] [G930F] Nethunter for LineageOS 16.0 ROM, Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-LineageOS16.0
Kernel Special Features:
Version Information
Status: Stable
Created 2019-04-14
Last Updated 2019-11-06
CHANGELOG
2019-09-15 - v1.3
Update to kernel source to 10.09.2019.
2019-06-11 - v1.2
Update kernel source to 09.06.2019.
2019-05-14 - v1.1
Update kernel source to 12.05.2019.
2019-04-14 - v1.0
Initial release
Reserved
Hey, great job porting this! Do you know if it is possible to enable monitor mode on this kernel? It seems to be possible on you lineage 14 one. I think i have the bcm4359.
Jack_Rickwood said:
Hey, great job porting this! Do you know if it is possible to enable monitor mode on this kernel? It seems to be possible on you lineage 14 one. I think i have the bcm4359.
Click to expand...
Click to collapse
No is not possible to enable monitor mode with bcm4359 on Lineage 16, only with compatible usb cards. In LineageOS 14 is that possible because of modded wifi driver. This driver works only with LineageOS 14 but it is bugged. If you capture packets with this driver all of they are malformed and unusable for further testing, only packet injection works fine.
You can try Dualboot patcher and have two version of LineageOS.
Ah, ok, thx
Is there anyway to broadcast 5G hotspot with this phone? I've tried using create_ap in a chroot debian, and it didn't work at all
deorth said:
Is there anyway to broadcast 5G hotspot with this phone? I've tried using create_ap in a chroot debian, and it didn't work at all
Click to expand...
Click to collapse
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Svirusx said:
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Click to expand...
Click to collapse
Is this kernel compatible with other aosp roms?
alanifotis said:
Is this kernel compatible with other aosp roms?
Click to expand...
Click to collapse
It is compatible with all custom roms which kernel is based ivanmeler LineageOS 16.0 source. Of course BACKUP before trying flash.
Svirusx said:
It is compatible with all custom roms which kernel is based ivanmeler LineageOS 16.0 source. Of course BACKUP before trying flash.
Click to expand...
Click to collapse
Ok thanks
Svirusx said:
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Click to expand...
Click to collapse
sorry if my words wasn't clear, for I'm not a native speaker. I meant 5GHz wifi hotspot (802.11ac), not the next generation mobile network.
deorth said:
sorry if my words wasn't clear, for I'm not a native speaker. I meant 5GHz wifi hotspot (802.11ac), not the next generation mobile network.
Click to expand...
Click to collapse
Build in wifi card isn't much compatible with chroot. I don't think if it's possible.
Svirusx said:
Build in wifi card isn't much compatible with chroot. I don't think if it's possible.
Click to expand...
Click to collapse
ok, I guess I'll use 2.4G then. Thank you for the reply.
@Svirusx
Wich files should i download from kalifs repository?
kalifs-armhf-minimal.tar.xz or kalifs-armhf-full.tar.xz
And where can i fund utilities and nethunter apk link seems broken
alanifotis said:
@Svirusx
Wich files should i download from kalifs repository?
Click to expand...
Click to collapse
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz
If you download minimal you can further install metapackages in chroot.
This depends for what you want use Kali Linux in chroot look at metapackages.
Svirusx said:
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz
If you download minimal you can further install metapackages in chroot.
This depends for what you want use Kali Linux in chroot look at metapackages.
Click to expand...
Click to collapse
What about utilities.7z and nethunter apk? Where can i download them
alanifotis said:
What about utilities.7z and nethunter apk? Where can i download them
Click to expand...
Click to collapse
I updated first page you can get more info from it.
utilities.7z are near first version of Nethunter kernel and now direct link is too in first page.
Svirusx said:
I updated first page you can get more info from it.
utilities.7z are near first version of Nethunter kernel and now direct link is too in first page.
Click to expand...
Click to collapse
Thank you very much man :laugh:
I managed to install kalinethunter and full chroot,but when i open kali terminal it runs some commands quickly and closes,any help?
Enchanted LineageOS 17.1 with 4.4 Infinity EAS Kernel
Gemini forever alive!
Download:
TWRP with 4.4 kernel
LineageOS 17.1
Installation:
If you are on stock TWRP you need to flash 4.4 to avoid any problems like /data corruption!
You need to perform a factory reset (format /data)!
Flash rom, gapps/microG and optionally magisk.
Known bugs:
Camera hang in Snap when switching to HDR (click back button and open camera again, boom, it's working)
Join Mi5 group on Telegram
Please consider donating to my hard work
https://paypal.me/xNombre
XDA:DevDB Information
Enchanted LineageOS 17.1 with 4.4 kernel, ROM for the Xiaomi Mi 5
Contributors
xNombre
Source Code: https://github.com/xNombre
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2020-01-06
Last Updated 2020-04-02
Reserved
Antutu Score
Reserved
¯\_(ツ)_/¯
Thanks for your hard work
hi
tanx 4 ur hard work
i want know about battery life plz..
install instruction?
and best frimware?
tanx
Can not change battery icon style it is stuck on Icon Portrait.
Hi @xNombre, just 2 quick questions regarding the the kernel used in your LOS release:
1- Does the kernel support HW Encryption? I remember on Havoc 2.9 (Android P) there was a port of 4.4 kernel with working HW crypto.
2- Will you release a standalone package of the infinity kernel in the future that can be used with other ROMs?
Thanks!
do we need jdc treble for this or what? since it "treble"
What about battery life?
can i flash other android 10 gsi based on this rom since it "treble"
immediately banned from telegram group right after joined. not even wrote a message or got a warning. interesting way to manage a community group.
i'll be around for feedbacks. thanks for your effort anyways.
nebik said:
Can not change battery icon style it is stuck on Icon Portrait.
Click to expand...
Click to collapse
It's LOS bug.
3V0LU710N said:
Hi @xNombre, just 2 quick questions regarding the the kernel used in your LOS release:
1- Does the kernel support HW Encryption? I remember on Havoc 2.9 (Android P) there was a port of 4.4 kernel with working HW crypto.
2- Will you release a standalone package of the infinity kernel in the future that can be used with other ROMs?
Thanks!
Click to expand...
Click to collapse
1. AFAIR not yet because it's not merged on LOS.
2. Probably no because there are too many custom changes made (dt & vendor) and I don't like listening to moaning that something is broken. I want to release more interesting ROMs some day (Syb... uhh ekh... eria).
shandianex1 said:
can i flash other android 10 gsi based on this rom since it "treble"
Click to expand...
Click to collapse
Hmmm, that's interesting question. I've only focused on making it fulfill all Android Q requirements concerning vendor separation (and such as APEX), not intended to make it GSI friendly. I guess there are still some incompabilities and you can't expect such and old device to be GSI friendly.
jackryder38 said:
What about battery life?
Click to expand...
Click to collapse
Test yourself, the biggest culprit about I can do nothing more is RIL. Maybe when Xiaomi releases Q for daisy, the blobs will make it better.
RmznDndr said:
immediately banned from telegram group right after joined. not even wrote a message or got a warning. interesting way to manage a community group.
i'll be around for feedbacks. thanks for your effort anyways.
Click to expand...
Click to collapse
The group is protected with antibot, I've checked your nickname and youre not banned for sure.
Enchanted LineageOS updated!
Changelog:
Merge latest kernel_common and CAF tag into kernel
Merge latest branch into qcacld driver
Use fq_codel queuing discipline, faster net
Update some blobs (those I have access to) from LA.UM.8.6.r1-02900-89xx.0
Remove unused move time data script
Add missing wifi mac generator
Fix USB tethering
Uprev Mapper to 2.1
Tweak Dalvik parameters accroding to new google configs
Go back to stock WiFi config and add some new Xiaomi edits - fixes connectivity problems
Rootdir updates
Minor cleanup
Fixup microG location
Massive overlay update from LA.UM.8.6.r1-02900-89xx.0
Selinux enforcing
Safetynet PASS!!!
Important LOS updates:
Fixed battery style
Updated to android 10.0 r23
Added survival script (magisk reflashes itself)
Repo sync all
Download via sf:
https://sourceforge.net/projects/xn...-17.1-20200119-UNOFFICIAL-gemini.zip/download
Please consider donating...
https://paypal.me/xNombre
xNombre said:
Enchanted LineageOS 17.1 with 4.4 Infinity EAS Kernel
Known bugs:
Speaker playing only left channel
5GHz hotspot
Camera hang in Snap when switching to HDR (click back button and open camera again, boom, it's working)
Click to expand...
Click to collapse
Fixed?
PavelPerm said:
Fixed?
Click to expand...
Click to collapse
Camera still hangs on HDR on/off. 5Ghz Hotspot works and about speaker i do not know.
nebik said:
Camera still hangs on HDR on/off. 5Ghz Hotspot works and about speaker i do not know.
Click to expand...
Click to collapse
Use this Gcam
https://easyupload.io/5ms9tu
It's version 7.2 - optimized and working 100% on gemini
PavelPerm said:
Fixed?
Click to expand...
Click to collapse
Not listed so not fixes, I thought it's clear.
New build could have some problems due to selinux change (dt2w or so) and I will push hotfix when I can.
xNombre said:
Not listed so not fixes, I thought it's clear.
New build could have some problems due to selinux change (dt2w or so) and I will push hotfix when I can.
Click to expand...
Click to collapse
I have problem with permission name (icon != Permission name)