I was on 12.5.4 Global and wanted to switch to 12.5.6 EEA, and i've red here and there that was a "safe" operation. I've tried to unlock the bootloader and flash the rom, all the roms gave compatibility issues, so i flashed the 12.0.3 EEA, but it was stucked on the boot logo. I've read that boot into EDL mode and flash via MiFlash could resolve the thing.
I tried but MiFlash crashes everytime i try to flash a rom.
Could someone give an help?
UPDATE: Now is in fastboot, same problem with the stock roms.
Did you read any tutorial? For which reason you flash 12.0.3?
Looks like you triggered anti-rollback protection. Read here https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
You cannot install previous versions of miui.
If by some chance the phone still boots to fastboot mode, try to install the LATEST firmware for your phone via mi flash tool (make sure you check "clean all" option and NOT the "clean all and lock" which is default in the flash tool).
And no, you cannot use EDL with this phone. EDL is locked to regular users and can only be accessed by an authorized account.
If you ca access fastboot and the device is recognized by you computer in fastboot mode then you can flash Miui using MiFlash.EDL mode is when you dont have access to fastboot.
Read tutorials about flashing miui using miflash on youtube.
brescianienea said:
I was on 12.5.4 Global and wanted to switch to 12.5.6 EEA, and i've red here and there that was a "safe" operation. I've tried to unlock the bootloader and flash the rom, all the roms gave compatibility issues, so i flashed the 12.0.3 EEA, but it was stucked on the boot logo. I've read that boot into EDL mode and flash via MiFlash could resolve the thing.
I tried but MiFlash crashes everytime i try to flash a rom.
Could someone give an help?
UPDATE: Now is in fastboot, same problem with the stock roms.
Click to expand...
Click to collapse
If u are in fastboot mode, install this : https://www.mediafire.com/file/lv98wac50a2dexz/MiFlash20210226.zip/file. extract and launch the exe, click on install. wait a pop-up in chinese and close all. Then re-try to re flash the EEA (in CLEAN ALL) with this mi flash. Tell me if all works
X0PIRAT3 said:
If u are in fastboot mode, install this : https://www.mediafire.com/file/lv98wac50a2dexz/MiFlash20210226.zip/file. extract and launch the exe, click on install. wait a pop-up in chinese and close all. Then re-try to re flash the EEA (in CLEAN ALL) with this mi flash. Tell me if all works
Click to expand...
Click to collapse
Or install via any mi flash lol.
It sounds like normal thing...
Cross flashing global/EEA tends to fail for whatever reason ( Super doesn't flash correctly ) and you get stuck bootlooping or straight towards fastboot depending on how far the super flashed...
Go back to global ROM and sit there. It should flash alright.
Idk why it does this ... Something is not alright with this phone
{Mod edit: Quoted post has been deleted}
Yes it's always 604 or 606 seconds for mi flash no matter how good your PC is either because I have a good one it should be like 2 minutes.
Wtf? What do you guys mean edl mode you don't boot into edl mode that requires you to take the back off and jump it with wires or something. You boot into fastboot mode like you did to unlock bootloader and flash with miflash and you don't go from 12.5.6 to 12.0.3 normally downgrading will brick your device. Where the f did you get all of this from. If you can boot back into fastboot mode volume down and power key until it boots into fastboot than reflash the last working firmware you had with miflash and look at the video. I don't understand what all the countries believe they can do with a phone edl mode is like OEM type fixes not some kid on Xda
brescianienea said:
I was on 12.5.4 Global and wanted to switch to 12.5.6 EEA, and i've red here and there that was a "safe" operation. I've tried to unlock the bootloader and flash the rom, all the roms gave compatibility issues, so i flashed the 12.0.3 EEA, but it was stucked on the boot logo. I've read that boot into EDL mode and flash via MiFlash could resolve the thing.
I tried but MiFlash crashes everytime i try to flash a rom.
Could someone give an help?
UPDATE: Now is in fastboot, same problem with the stock roms.
Click to expand...
Click to collapse
Yes it's always 604 or 606 seconds for mi flash no matter how good your PC is either because I have a good one it should be like 2 minutes.
Wtf? What do you guys mean edl mode you don't boot into edl mode that requires you to take the back off and jump it with wires or something. You boot into fastboot mode like you did to unlock bootloader and flash with miflash and you don't go from 12.5.6 to 12.0.3 normally downgrading will brick your device. Where the f did you get all of this from. If you can boot back into fastboot mode volume down and power key until it boots into fastboot than reflash the last working firmware you had with miflash and look at the video. I don't understand what all the countries believe they can do with a phone edl mode is like OEM type fixes not some kid on Xda
You can always tell your on Xda when they offer help that is 1 link and try this is the only information they give. The reason you screwed up is because lazy people that don't leave full instructions. You never never never never need to worry about edl mode. Fast boot or bootloader mode as it's called is how you restore a soft bricked phone what did you do with edl mode I don't even understand what you tried to do.
brescianienea said:
I was on 12.5.4 Global and wanted to switch to 12.5.6 EEA, and i've red here and there that was a "safe" operation. I've tried to unlock the bootloader and flash the rom, all the roms gave compatibility issues, so i flashed the 12.0.3 EEA, but it was stucked on the boot logo. I've read that boot into EDL mode and flash via MiFlash could resolve the thing.
I tried but MiFlash crashes everytime i try to flash a rom.
Could someone give an help?
UPDATE: Now is in fastboot, same problem with the stock roms.
Click to expand...
Click to collapse
You thought this is something you needed to do? Edl mode is nothing that a regular soft brick would require
Here's another one edl mode I can't understand why you or anyone else would think this is how we restore a soft bricked phone lol this would be crazy I would be done. Your not even close to the first person to say this. Same with battery backup that doesn't make sense it's not battery backup you don't backup your battery it's battery life
Related
Hey! Today I rooted my Mi A2 Lite using magisk with fastboot. Let me go over what I did:
I enabled OEM unlocking and USB debugging in settings
I flashed the rooted img.
Me, being a retard, disabled USB debugging and OEM unlocking
Of course when I rebooted it said The system has been destroyed.
So, I've been searching all over the internet (went as far as page 3 of google results sometimes ) and didn't find a way to boot into twrp or anything with disabled usb debugging and OEM.
I've tried XiaomiTool and similar, nothing worked (device locked or similar message on anything)
The only way I've found is using test points on the motherboard. That's my last resort, but I want to know some things before I do it.
1. Do you know any way I could try and boot/flash an img?
2. Do you think I can do the test points thing at home (not an expert)?
3. Any tips on doing it?
Thank you so much if you are able to help, I really love this phone, hope I didn't screw it up
Been there a month ago for 8 hours
The popular solution is to disassemble the phone , disconnect battery and boot into EDL mode
But I downloaded the Mi A2 lite toolkit and messed with it ( the unbrick and boot to twrp options) after trying to flash 10.0.3.0 stock rom and miflash tool was deceiving me that it was flashing but it was not .. try to flash it by flash_all.bat
The stock fastboot rom : https://en.miui.com/getrom-354.html?m=yes&mobile=2
The toolkit : https://forum.xda-developers.com/mi-a2-lite/how-to/tool-10-11-2018-backup-restore-lock-t3865519
I downloaded the 1.0.4.1
Stay calm and remember it's just a piece of silicon a lot can go wrong but butor can go right everything has a solution
Mark7Aymn said:
Been there a month ago for 8 hours
The popular solution is to disassemble the phone , disconnect battery and boot into EDL mode
But I downloaded the Mi A2 lite toolkit and messed with it ( the unbrick and boot to twrp options) after trying to flash 10.0.3.0 stock rom and miflash tool was deceiving me that it was flashing but it was not .. try to flash it by flash_all.bat
The stock fastboot rom : https://en.miui.com/getrom-354.html?m=yes&mobile=2
The toolkit : https://forum.xda-developers.com/mi-a2-lite/how-to/tool-10-11-2018-backup-restore-lock-t3865519
I downloaded the 1.0.4.1
Stay calm and remember it's just a piece of silicon a lot can go wrong but butor can go right everything has a solution
Click to expand...
Click to collapse
Thanks for the response! I'll try later and see how it goes, hope it works :fingers-crossed:
Edit: I tried the toolkit, it gest stuck on downloading. I think I'll try to open my phone and use EDL mode. I hope I dont **** it up XD
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
Two quick questions:
1.The phone died on its self without your intervention or...?
2.Have you tried to flash the stock firmware via MiFlash , while the phone is in edl mode(the command is: fastboot oem edl)?
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
I think you are confusing some things here; adb is not an option now so you can´t boot device normally and also you said "fastboot edl" but they are different modes.
While in fastboot how did you try booting to TWRP image? (you said through adb but this is not right)
Can you get to fastboot? (hold vol down while booting, should see a rabbit on the screen)
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
When your phone is in EDL mode(you won't be seeing any logo on your phone ,only black screen) it's absolutely normal to see the device as COM port , because the device is in another factory mode. And there is no problem flashing stock ,when your phone is seen as COM port. So if you can't flash the stock firmware in fastboot mode or EDL mode , maybe you have a hardware issue. To be sure -take a screenshot of the error in MiFalsh when the phone is in edl Mode (seen as a COM port) and you try to flash the stock firmware.
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
pocchio said:
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
Click to expand...
Click to collapse
Here is the stock firmware from Xiaomi site:
https://en.miui.com/getrom-354.html?m=yes&mobile=2
Don't worry that it says MIUI , the firmware is Android One , they just forgot to change the name from MIUI to Android One , I have already tried it ,and I can confirm that it's 100% stock Android One firmware , good luck!
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
pocchio said:
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
Click to expand...
Click to collapse
I will give a solution in a minute
EDIT: Are you sure your bootloader is unlocked? (fastboot oem unlock)
You have two choices , you need to find an older version of MiFlash beta , i'll give you a video :
https://m.youtube.com/watch?v=-7O1Svib14g
In the video description you can find a link for the MiFlash beta ,I hope it helps.
If not , you'll have to consider the Testpoint unbrick method , there are several guides.
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
pocchio said:
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
Click to expand...
Click to collapse
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
nikoman1987 said:
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
Click to expand...
Click to collapse
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
pocchio said:
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
Click to expand...
Click to collapse
the command is: fastboot oem get-product-model
nikoman1987 said:
the command is: fastboot oem get-product-model
Click to expand...
Click to collapse
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
pocchio said:
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
Click to expand...
Click to collapse
tried the command too, it doesn't work.
So test point doesn't work too.. That's bad news
EDIT: fastboot getvar product command works , you can try it
And another question , have you tried to boot with patched boot.IMG ?
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
You need a recovery to flash , which has a specific partition in the phone storage. You can flash only via fastboot . You need to boot into recovery , so try with a patched boot image for your version of the rom
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
So the last resort , we'll try to flash the ROM that I have mentioned before via fastboot. Place the zip file GM 1.1 in your PC (it has to be in the same directory as your adb and fastboot tools)
then open cmd and run the command
fastboot flash (the full name of the zip).zip
and hit enter
maybe that will solve it
And if this doesn't help again... type these fastboot commands :
fastboot format userdata
fastboot format system
fastboot format cache
fastboot format vendor
fastboot format recovery
fastboot format boot
then try again to reflash the stock rom (first try in edl mode ,if this doesn't do anything ,you'll have to format everything via fastboot commands again ,and try to flash the ROM in fastboot mode)
And if this doesn't help too... Then you're free to hit that ? in the ground hahahah (just kidding)
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
pocchio said:
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
Click to expand...
Click to collapse
which version of the firmware you are flashing? 10.0.9.0 or another version , so I can send you a link and walk you through the procedure.
And when you flashed the GM 1.1 the boot screen didn't changed from Android one? (the GM 1.1 version is a MIUI stock port and has to change your boot screen to black screen with white MI logo on it) It is very important to know
One of my friends told me to try this: just open the directory of the stock firmware , navigate to flash_all.bat and run the bat file (NOT THE FLASH_ALL_LOCK!!!) and wait for the end of the process. He had a similar problem , and it worked. He explained that for any reason , the recovery was the problem , because it was flashed in the boot partition. When you use flash_all.bat The file will erase all partitions and rewrite them. MiFlash won't , so try that
Hello guys, I was returning to stock rom through miflash, but the process was interrupted right at the beginning and I was unable to continue. I went to restart the cell phone to try to perform the process again, however when doing this the cellphone simply does not give the image, nor vibrates. I think that because it interrupted the process, the system image was corrupted, or something. Would you know of anything I can do to try to recover my cell phone? I can't access anything from him. The computer does not recognize it, and I cannot enter fastboot mode.
What happens when you hold power and volume down when booting?
Try EDL (Emergency Download Mode):
How to Enter EDL (Emergency Download) Mode Xiaomi Devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices EDL (Emergency Download Mode) is the mode required to flashing Stock ROM of Android Xiaomi devices that are usually applied to Xiaomi devices that use Qualcomm Processor. fastboot edl zip fastboot edl v2 edl mode redmi note 3 download...
www.beritahuaja.com
Download adb driver from xda install them
Then if you can access your fastboot mode on phone just plug it to pc on usb 2.0 not usb 3.0 you can flash it with mi flash tool and check clean all not clean and lock
Just control your fastboot rom with 7zip before flashing if corrupted it will show you a message
If you flashed your phone and choose clean and lick you need edl mode xiaomi authorized account to unbrick your phone
Robert314 said:
What happens when you hold power and volume down when booting?
Try EDL (Emergency Download Mode):
How to Enter EDL (Emergency Download) Mode Xiaomi Devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices EDL (Emergency Download Mode) is the mode required to flashing Stock ROM of Android Xiaomi devices that are usually applied to Xiaomi devices that use Qualcomm Processor. fastboot edl zip fastboot edl v2 edl mode redmi note 3 download...
www.beritahuaja.com
Click to expand...
Click to collapse
Nothing happens. I just don't have access to fastboot mode
thomassolcia said:
Nothing happens. I just don't have access to fastboot mode
Click to expand...
Click to collapse
Did you try EDL like I linked?
Robert314 said:
Did you try EDL like I linked?
Click to expand...
Click to collapse
Flashing with MIFLASH in EDL mode requires authorization.
Only repair centers and certain developers have this authorization.
It is bricked.Only EDL paid account can help now.You chose clean all and lock option because it is selected by default.
Asking for future reference, if i choose clean all and lock option with a miui global stock rom, will it brick my phone? The phone came with global rom preinstalled and is named poco f3, not redmi k40.
ApexPrime said:
Asking for future reference, if i choose clean all and lock option with a miui global stock rom, will it brick my phone? The phone came with global rom preinstalled and is named poco f3, not redmi k40.
Click to expand...
Click to collapse
No, the error is to re-lock on a Chinese version.
thomassolcia said:
Hello guys, I was returning to stock rom through miflash, but the process was interrupted right at the beginning and I was unable to continue. I went to restart the cell phone to try to perform the process again, however when doing this the cellphone simply does not give the image, nor vibrates. I think that because it interrupted the process, the system image was corrupted, or something. Would you know of anything I can do to try to recover my cell phone? I can't access anything from him. The computer does not recognize it, and I cannot enter fastboot mode.
Click to expand...
Click to collapse
Have you unlocked bootloader?
minotavros said:
Have you unlocked bootloader?
Click to expand...
Click to collapse
"I was returning to stock rom"!!!
Hello everyone ... I am also a happy and content owner of the POCO F3 8/256 ... and I would like to ask something ... I tried to enter an SOS emergency number ... (of my wife) .. . and as soon as the configuration was done, he sent a message correctly to my wife ... that at the moment she was away from home ... (even if I read that she would also send the position) ... I tried again last night by tapping 5 consecutive times on the volume button and it does not send anything ... you know something about it
25 seconds to flash
NOSS8 said:
25 seconds to flash
Click to expand...
Click to collapse
maybe it ain't that obvious? hahah thats just like placing large zip file to the phone.
I ran into a similar issue long story short the screen was black and in dev manager recognised as qusb loader or something which i believe is EDL mode but the screen just remained black. I googled around and a certain developer assisted me so what i did is hold power and vol down for over a minute it must be over a minute or so and re entered back into fastboot and was able to flash global rom. The only issue now is i can install miui via twrp but if i try to install any fastboot Asop rom the phone immediately drops back into EDL mode with the black screen issue. so for now i am limited to EU roms.
sam00561 said:
I ran into a similar issue long story short the screen was black and in dev manager recognised as qusb loader or something which i believe is EDL mode but the screen just remained black. I googled around and a certain developer assisted me so what i did is hold power and vol down for over a minute it must be over a minute or so and re entered back into fastboot and was able to flash global rom. The only issue now is i can install miui via twrp but if i try to install any fastboot Asop rom the phone immediately drops back into EDL mode with the black screen issue. so for now i am limited to EU roms.
Click to expand...
Click to collapse
If you can enable fastboot mode, flash the original rom with Miflash.
NOSS8 said:
If you can enable fastboot mode, flash the original rom with Miflash.
Click to expand...
Click to collapse
Yes i have already done that the reason for my post was to help the original poster out who can try this method to get back into fastboot so he can flash stock again through mi Flash.
sam00561 said:
Yes i have already done that the reason for my post was to help the original poster out who can try this method to get back into fastboot so he can flash stock again through mi Flash.
Click to expand...
Click to collapse
Enter in EDL mode is easy but flashing with MIFLASH in EDL mode requires authorization.
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
chrwo said:
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
Click to expand...
Click to collapse
Try fastboot method without bootloader lock
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
TWRP is not required to flash the global ROM.
Just specify the unzipped global ROM as the working directory of MiFlash.
try flashing fastboot rom using miflash tool
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Mi Pad 5 didn't have recovery partition, since it use A/B structure. You must execute fastboot boot recovery.img and after that install recovery to RAMdisk.
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Whered you even get twrp? Had an error while flashing from cn to global as well about sparse super failed. Then tried reflashing but i got the same error as you had and all i did was reboot the tablet in fastboot while it was still in fastboot and after that it flashed successfully even though it threw out am error flash is not done but the tablet rebooted hy itself and then booted up after a minute or two. Almost gave me a heart attack while i was at it
Edit: seems you flashed it successfully already thats good. Fastboot can be clunky on ryzen sometimes, i remeber back on mi a2 had to use a hub instead of directly connecting my phone to my ryzen pc for fastboot to work properly and not get stuck while flashing. But now i can connect directly after switching to a b450motherboard, was using a b350 before
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
chrwo said:
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
Click to expand...
Click to collapse
It would be great if you can make a step-by-step guide on how to do this. Thank you.
puleen said:
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
Click to expand...
Click to collapse
prob just driver problems, i use ryzen and it works fine.
Don't know if I need to create a new thread. After the unlocking, I tried to change the region from RU to CN and got the same problem after a "successful" update as chrwo with "Mismatching image and device" error and fastboot mode. Then I tried to flash global version and the device error is gone but I still have the fastboot mode. Recovery from MiToolv2 doesn't help either, after successful recovery tablet still goes only to fastboot.
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Choochter said:
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
Click to expand...
Click to collapse
Not work for me.
But when I try with Miflash tool and anoter Rom (newest), it worked
Critical Hit said:
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Click to expand...
Click to collapse
I meer the same errỏr when I use Intel PC.
So, I dont think this a problem of Ryzen
i also brick the device using mi-flash sucking program. i finally using fastboot command flashing which copying from the stock rom "flash_all.bat" file.
So we can't lock the bootloader after installing the global rom?
good evening
I have been trying to return to stock miui from Pixel Experience since yesterday but get this error every time I try to flash the Firmware and do not know what I can do about it. I would be happy if somebody knew what this error is from and what might fix it.
Same problem. Don't try more things because you will brick your phone like mine.
Thanks for your reply. What did you do that bricked your Phonem? This way I know what to avoid. Thanks you in advance
As you are sure your device is a eea one, try with this last official stable firmware : Version: V13.0.7.0.SKHEUXM
You can find it here https://new.c.mi.com/global/miuidownload/detail/device/1900394
Fastboot version here at bottom : https://xiaomifirmwareupdater.com/miui/alioth/stable/V13.0.7.0.SKHEUXM/
Or https://bigota.d.miui.com/V13.0.7.0...EUXM_20220627.0000.00_12.0_eea_e461331a7d.tgz
Thanks you so much I will try that
and i did not mention this but I started this whole project of returning to miui because my poco was and still is in a bootloop and is only accessible over fastboot, not recovery and even though it sometimes gets to the system it almost instantly crashes and reboots
Still the Same Error unfortunatelly
nockcx said:
and i did not mention this but I started this whole project of returning to miui because my poco was and still is in a bootloop and is only accessible over fastboot, not recovery and even though it sometimes gets to the system it almost instantly crashes and reboots
Click to expand...
Click to collapse
Ok,
Do you have any idea what you did that may have caused this bootloop ?
Have you used any Qualcomm Tools or any soft in EDL mode ?
No, I did not do anything that would mess with the system to my knowledge . which is why i really do not know what to do. Can This Error occur because of a USB 3.0 used to flash? The Phone even tries to reboot when it is detected as a Fastboot device, maybe This has Something to do with it. Maybe it loses the Connection and therefore the flashing process stops. Are there possible ways to fix This?
Try with the latest android platform tools.
Put the content of platform tools archive in the fastboot folder and launch flash_all.bat don't use flash_all_lock
Still the Same Error . Can This be because of a Driver or a hardware issue?
i had similar issues but with the super partition when trying to flash from cmd.
flashing with miflash instead solved it.
It doesnt seem to make any difference to the error whether i flash it via cmd or miflash
nockcx said:
Still the Same Error . Can This be because of a Driver or a hardware issue?
Click to expand...
Click to collapse
Maybe : So as you can try with other PC, USB cable, USB connector, reinstall USB drivers...
I already tried with two Notebooks, I will try again tomorrow with another PC and installing USB drivers again. Thank you
You could try redownloading the MIUI ROM... you got it from xiaomifirmwareupdater.com right?
And yes ^^, try other PCs/laptops and other USB-cables.
Just please make sure
Unfortunately, Fastboot-Flashing is a gamble. It's not a solid protocol. It has zero protection against sudden USB-connection loss.
And manufacturers like Xiaomi go out of their way and block Qualcomm's EDL Mode, which is the only way to recover your phone in case Fastboot Mode stops working, because that Mode itself can also get damaged.
Fixed - first flash a miui recovery rom from twrp make sure the rom version lower than the latest one, now flash and boot miui , now just update from miui updater once you updated to the latest version , now try to flash the fastboot rom that you trying to flash, it should work.
I cant access a bootloader like TWRP because the phone still keeps rebooting after a couple of seconds in the bootloader so i cant really do much. I only have access to fastboot
nockcx said:
just flash a custom vbmeta and then install a custom recovery in to the boot partition like fastboot flash boot ....flash both the slots boot_a and boot_b the run fastboot reboot recovery do all this with latest platform tools
Click to expand...
Click to collapse
okay Im as far as I have never been with a very weird method, maybe somebody can explain. Because my poco always wants to reboot I found out a way to keep in in Fastboot mode. I repeatedly press the power and volume down button, This way it stays on for a lot longer, but it still is not enough to succeed at flashing the rom. It also lets me believe that my problem is not a software but probably a hardware problem, otherwise and cannot explain this suuuper weird behavior. what do you guys think? is there a possible fix you know?