Develop Bugs

Android Mod Zip Installer- Android 10

Bases other than stock-like comes with right clock but you can change it.
Stock like bases are limited to as what can be modded if you choose them. I suggest starting with first selection on SystemUI base and framework gray (color of QS Icons) instead of stock-like and making changes from there.
DARK MODE- If you want to use dark mode, flash SystemUI stock like base but no framework base. You can't change QS Columns or any color mods. Clocks, internet speed, batteries, etc is all
Zip Method to be Flashed in TWRP.
I put together a zipped folder of individual installs that can be flashed from TWRP. Take this zip and unzip it on to your internal sdcard. There are folders with descriptions of what is inside. Each mod is flashed individually and the same rules apply such as bases for SystemUI and framework must be flashed first , etc. There is a "Complete installation" zip to flash after bases and mods are selected. Nothing is installed until you flash it. There is an option for regular installation or magisk module type installation. The magisk version isn't actually a module but shows up as one in magisk manager after flashing.
Sizing for Custom batteries and custom Text batteries are hit and miss. Just re-flash the custom battery to reset or try another size if needed.
Install minitbatteryresources.apk prior to flashing 3Minit Battery Mod.
I only support my zip method of installation now. Aroma quit working on newer phones like Pixel 3 series.
Zip Method
Root required
Instructions.
1. Unzip Zip Installer into a folder of your choice on your sdcard.
2. In TWRP, find the folder you unzipped it to.
3. First select a SystemUI base (the bases have to be installed for mods to work).
4. Select one of the Framework Bases
5. Flash any and all mods you want (individually, don't flash by adding zips in TWRP in series).
6. Flash complete installation zip.
List of MODS Available
1. Clock Format and Position Mods
2. Internet Traffic Speed Single Indicater, only the strongest signal shows
Internet Traffic Speed in and out, one over the other
3. Dynamic Navbar
4. Navbar Height Options
5. Remove NavBar Completely
6. Battery percent text Only-Battery Icon Removed system percent
7. 3 Minit Battery
One percent custom battery Mods-Several to choose from
8. Colored Navbar Icons
9. Traffic Speed Indicator Up Icon Colors
10. Traffic Speed Indicator Down Icon Colors
11. Colored Statusbar Icons
12. Colored Notification backgrounds
13. Colored Notification Text
14. Colored QS Icon Text
15. Colored QS background
16. Remove Carrier Text Options
17. QS Columns (How Many) Option
18. Smaller home button dots
19. Settings Background Color
20. Lockscreen wallpaper tint remover
21. Remove QS Icons Circles
22. Change QS Icons OFF color
23. Ability to change QS Icon circle background colors
24. Fonts
25. Pixel Launcher Mods now included
26. Custom Text batteries 3 Font styles. Bases come with different sizes.
a. Droid thin
b. Google sans thin
c. Google sans medium
27. Custom battery sizing.
Example of what you see
Main menu
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clock Mod menu
Zip Installer Android 10 Dec update uploaded 12-7-19
https://www.androidfilehost.com/?fid=4349826312261654709
Pixel Launcher Zip Installer Android 10 Dec update
https://www.androidfilehost.com/?fid=4349826312261654003

Looking forward to giving it a try! Thanks

So, if I want to use the magisk version on dp2 I have to flash the DP2 aroma and then the magisk version?
I think I don't have fully understood

TENN3R said:
So, if I want to use the magisk version on dp2 I have to flash the DP2 aroma and then the magisk version?
I think I don't have fully understood
Click to expand...
Click to collapse
No, the magisk version is a stand alone Aroma installer for those on Magisk. Same mods but instead of directly installing the mods it creates a TWRP Magisk flashable zip on your sdcard in a folder called Magisk. Once the aroma installer has finished and while still in TWRP, go find and flash that zip then reboot.

Is it possible to have power button function on the navbar in portrait mode? I can't seem to find it.
Cheers
Sent from my Google Pixel using XDA Labs

@Tulsadiver Been trying to make this work all day without any luck. I'm on Android P DP2 and tried the magisk version and in magisk manager it says that "it's not a magisk module"... and in twrp I'm getting syntax error. So I tried the normal aroma in twrp and I choose the first option for base and then nothing else just to get the 4 column and after I reboot I keep getting into a bootloop back into twrp everytime. I tried earlier to get the other bases and also restore stock but nothing works. it just kicks me back to twrp every time. lastly I reflashed android P DP2 factory image and then gave it a go again to be on a clean system and it still kicks me back to twrp and not into the system. Are you able to see what I've been doing wrong?

Arju said:
@Tulsadiver Been trying to make this work all day without any luck. I'm on Android P DP2 and tried the magisk version and in magisk manager it says that "it's not a magisk module"... and in twrp I'm getting syntax error. So I tried the normal aroma in twrp and I choose the first option for base and then nothing else just to get the 4 column and after I reboot I keep getting into a bootloop back into twrp everytime. I tried earlier to get the other bases and also restore stock but nothing works. it just kicks me back to twrp every time. lastly I reflashed android P DP2 factory image and then gave it a go again to be on a clean system and it still kicks me back to twrp and not into the system. Are you able to see what I've been doing wrong?
Click to expand...
Click to collapse
You did nothing wrong. Updater-script error. I uploaded a new Magisk one in op. Try it. I can't test it at the moment. Computer problems.

Tulsadiver said:
You did nothing wrong. Updater-script error. I uploaded a new Magisk one in op. Try it. I can't test it at the moment. Computer problems.
Click to expand...
Click to collapse
I'll try it later on today and report back
Just to be sure, do I flash the magisk one in twrp and then go through aroma and then it creates a zip in a magisk folder and then I flash that in twrp or am I supposed to use the magisk version of your mod in magisk manager and will aroma start from there crating a zip that needs to be flashed in twrp?
In aroma I saw that there are a couple of bases but the first one and the on that says that it's base stock, is there any difference?

Arju said:
I'll try it later on today and report back
Just to be sure, do I flash the magisk one in twrp and then go through aroma and then it creates a zip in a magisk folder and then I flash that in twrp or am I supposed to use the magisk version of your mod in magisk manager and will aroma start from there crating a zip that needs to be flashed in twrp?
In aroma I saw that there are a couple of bases but the first one and the on that says that it's base stock, is there any difference?
Click to expand...
Click to collapse
Everything is done through TWRP. This is not a module though after flashing the Magisk zip it will show up in magisk manager as a module so you can disable it like a module.
There is a base that has clock on the right, 4 column QS, one that is the same but wifi-data has up-down arrows, one that is stock like with left hand clock and 3 column QS, one that is the same but has up-down arrows.

Tulsadiver said:
Everything is done through TWRP. This is not a module though after flashing the Magisk zip it will show up in magisk manager as a module so you can disable it like a module.
There is a base that has clock on the right, 4 column QS, one that is the same but wifi-data has up-down arrows, one that is stock like with left hand clock and 3 column QS, one that is the same but has up-down arrows.
Click to expand...
Click to collapse
It works now. Thank you!

Maybe a stupid question, but what about gapps? included? or need openGapps 8.1?

LoeWn said:
Maybe a stupid question, but what about gapps? included? or need openGapps 8.1?
Click to expand...
Click to collapse
this is not a rom. this is a mod that you flash on top of Android P dp2 and it will give you the option to add those features mentioned in the first post. so make sure you're on android P dp2 before you flash this.

DP3 is up. Magisk version will come later.

LoeWn said:
Maybe a stupid question, but what about gapps? included? or need openGapps 8.1?
Click to expand...
Click to collapse
This is for stock rom. So , dun need gapps

I'm unable to download the system image of for because I'm at the lake but if someone can upload the systemUIGoogle.apk and framework-res.apk I can get started on it.

Will this work on p Aug release?

Kanuk said:
Will this work on p Aug release?
Click to expand...
Click to collapse
The other Pixels have but I haven't tested this one.

Tulsadiver said:
The other Pixels have but I haven't tested this one.
Click to expand...
Click to collapse
Works great,thanks

Uploaded new Aroma's

How would I go about flashing this? Do I start by flashing the aroma installer, then the included Magisk? Does that mean I can't use the latest Magisk?

Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

This is in place until TWRP is ready. You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so.
The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work. Use colorable bases if you want to be able to change QS circle colors.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Root Permissions)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
Includes powershell installer, one for windows, one for linux.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Height Options
Navbar Swap
Remove NavBar
3 Minit Battery
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Custom Battery Sizes in case custom batteries are too large or too small
Change QS pulldown circle color
Change Status bar and QS WiFi and Data Icons
Note Added a couple of wifi and data signal options.
WiFi 1 and Cell Tower 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WiFi 2 Cell Tower 2
WiFi 3 data 3
Android 12 Beta 1 uploaded 5-31-21
ADB Mod Installer Files12Pixel3XL.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Android 11 uploaded 6-13-21
ADB Mod Installer Files11Pixel3XLJune.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
-------------------------------
Android 10
ADB Installer uploaded 6-3-20
https://www.androidfilehost.com/?fid=4349826312261825198
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
ADB Pixel Launcher Installer uploaded 6-10-21
NexusLauncherReleaseADBPixel4XL.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-----------------------------------------------------
TWRP themes for those that like things a little different
A couple of TWRP themes. These were made by G.M.L. and he deserves all the credit. His thread is here:
https://forum.xda-developers.com/android/themes/themes-twrp-theming-links-development-t3598833
I tweaked them to work on the Pixel 3 XL with it's notch and large status bar. Top Shelf and Transparent.
To apply:. Make a folder in your sdcard's TWRP folder called theme. Put one of the themes in the folder and rename it ui.zip. The next time you boot into TWRP it will be there.
Top shelf
https://www.androidfilehost.com/?fid=1395089523397904497
Transparent
https://www.androidfilehost.com/?fid=1395089523397892112

Hey, @Tulsadiver - any plans for the little pixel 3? Would be awesome if so!

-Michael_ said:
Hey, @Tulsadiver - any plans for the little pixel 3? Would be awesome if so!
Click to expand...
Click to collapse
I'm working on it. Would you like to test it?

Tulsadiver said:
I'm working on it. Would you like to test it?
Click to expand...
Click to collapse
Yes, absolutely!

In for results of this P3 (small) test. :]

-Michael_ said:
Yes, absolutely!
Click to expand...
Click to collapse
Here you go!
https://www.androidfilehost.com/?fid=11410932744536985963

w0rdie said:
In for results of this P3 (small) test. :]
Click to expand...
Click to collapse
See post above

I must be doing something wrong... any selection I make only reloads the Selection Menu.
Windows 10

w0rdie said:
I must be doing something wrong... any selection I make only reloads the Selection Menu.
Windows 10
Click to expand...
Click to collapse
I don't have Windows 10 but I wouldn't think that would matter. Do you have root? Do you have adb degugging checked in developers menu? Did you give adb root privileges when you tried to install your first one? A pop-up should have come up.

Tulsadiver said:
I don't have Windows 10 but I wouldn't think that would matter. Do you have root? Do you have adb degugging checked in developers menu? Did you give adb root privileges when you tried to install your first one? A pop-up should have come up.
Click to expand...
Click to collapse
Yeah sending ADB commands is working fine, I didn't get the SU prompt when I ran the .bat but I ran adb shell / su in another terminal to get ADB granted root right.
---------- Post added at 12:34 PM ---------- Previous post was at 12:31 PM ----------
Running it in Powershell (rather than CMDR) worked. Setting it up now.
Thanks!
---------- Post added at 12:54 PM ---------- Previous post was at 12:34 PM ----------
This had to have been so much work -- link to where I can buy you a beer?
It's perfect.

installing systemui base gives me permission denied in the command prompt and trying framework stock-like base i assume doesnt install and doesnt reboot my phone automatically

I don't see left clock... will center clock move it to the left side?

rootisthebest said:
installing systemui base gives me permission denied in the command prompt and trying framework stock-like base i assume doesnt install and doesnt reboot my phone automatically
Click to expand...
Click to collapse
open magisk and go to superuser then select adb shell to set it on
then try agin

w0rdie said:
Yeah sending ADB commands is working fine, I didn't get the SU prompt when I ran the .bat but I ran adb shell / su in another terminal to get ADB granted root right.
---------- Post added at 12:34 PM ---------- Previous post was at 12:31 PM ----------
Running it in Powershell (rather than CMDR) worked. Setting it up now.
Thanks!
---------- Post added at 12:54 PM ---------- Previous post was at 12:34 PM ----------
This had to have been so much work -- link to where I can buy you a beer?
It's perfect.
Click to expand...
Click to collapse
Thanks for testing and figuring out how to work it on Windows 10.
It did take a while to get it going but I've had a ADB base for a while. There are always times in between root and TWRP so I thought it would come in handy. I just had to update a lot of .bat files which was a bit tedious. While I sure do enjoy a beer(s), more than my wife cares for, no need. Hitting the thanks button is plenty fine. I'm sure there are a lot of typos since I put this together as fast as I could.
I'll get this out on the Pixel 3 forum now that I know it is working at least to some extent.

MrGimpGrumble said:
I don't see left clock... will center clock move it to the left side?
Click to expand...
Click to collapse
You are right. I'll get that updated. Center clock will only work with a hidden notch.

Tulsadiver said:
You are right. I'll get that updated. Center clock will only work with a hidden notch.
Click to expand...
Click to collapse
Thanks as always!
Also, I always ask but is there any way to hide the wifi and data icons?
No biggie if not! always appreciate your mods!

MrGimpGrumble said:
Thanks as always!
Also, I always ask but is there any way to hide the wifi and data icons?
No biggie if not! always appreciate your mods!
Click to expand...
Click to collapse
You can try this. Should have left clocks and in the internet traffic menu, an option to remove wifi-data.
https://www.androidfilehost.com/?fid=11410932744536986529

Tulsadiver said:
You can try this. Should have left clocks and in the internet traffic menu, an option to remove wifi-data.
https://www.androidfilehost.com/?fid=11410932744536986529
Click to expand...
Click to collapse
Can you please tell me how to make changes?
So I already flashed both the base and framework... Then I selected 3minit and did a complete install. How do I now change to left clock, no data/wifi icons, and keep 3minit?
Thanks!

MrGimpGrumble said:
Can you please tell me how to make changes?
So I already flashed both the base and framework... Then I selected 3minit and did a complete install. How do I now change to left clock, no data/wifi icons, and keep 3minit?
Thanks!
Click to expand...
Click to collapse
Flash left clock, flash remove wifi-data, flash complete installation.

So here is what I found;
Left clock worked
removing the wifi+data icon worked
when i selected #23 Number of QS Columns --> #4 (6 columns) i end up with a 4 column
There was no remove carrier text for left clock
Just some feedback... thanks again for your hard work!

Custom Magisk Module Mod Maker-ADB and Zip Installers

The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu. You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so.
Zip installer is installed from your phone, not your pc. You will install the mods through Magisk app. Unzip the Zip Installer onto your internal sdcard. Like ADB installer, start with a SystemUI base. Do not reboot between selections as Magisk as shows after flashing selections (options are found inside the numbered folders). Hit the back button to make your next selection. Do not reboot thru Magisk until after you are done with your selections and have flashed the "Complete Installation" zip.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
Android 11
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
ADB Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Shell Root Permissions. If missed on first opportunity, turn on in magisk manager, superuser)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
Root required
ZIP Instructions.
1. Unzip Zip Installer onto your internal sdcard
2. Flash thru Magisk app. Flash the SystemUI Base First. It provides the necessary smali files and public ID's for everything to work
(Do not reboot between selections as Magisk shows after flashing selections. Hit the back button to make your next selection)
3. Go through the other options selecting the mods you want. It is generally best to start at the top and work your way down.
4. Once finished with selections, flash "Complete Installation" at the top. This will install your selections as a Magisk module.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Swap
Remove NavBar
3 Minit Battery
Battery Bar Mod
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Animations
Fonts (including Lockscreen clock)
Change QS pulldown circle color
Change Status bar Data Icon to a "cell tower" looking icon (see below)
Change QS data icon to a cell tower icon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note Added a couple of wifi and data signal options.
WiFi 1 and Cell Tower 1
WiFi 2 Cell Tower 2
WiFi 3 data 3
Includes a batch (.bat), and powershell installers, one for windows, one for linux. Big thanks to @wrongway213 for doing all the testing
and helping with the linux powershell installer.
Android 12 comes with a more narrow brightness-volume bar option.
This is a SystemUI mod. It's not compatible with other SystemUI mods.
There's just one base now. To change the QS pulldown colors, go to settings/display/device theme at the bottom. The black options change the settings background from gray to black.
---------------------
Zip Installer
Android 12.1
July update
Uploaded 7 -8-22
https://mega.nz/file/cdIFTBJa#Rvktpa0sU6URmGRse-T6LcEUoVDMItxhsHzump-L-f4
ADB installer
12.1
July update
Uploaded 7 -8-22
https://mega.nz/file/RJhCGJAD#BDu5ePwvQnvPYzdMhRo6V993kRJe9H7nr9MXnEacd_o
----------------------
Android 12 - January update
Uploaded 1-8-22
ADB Mod Installer FilesPixel4XL12.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
---------------------------
Android 11
Uploaded 7-9-21
File on MEGA
mega.nz
ADB Mod Installer FilesPixel4XLJuly.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
Android 10
ADB Module maker uploaded 8-6-20
https://www.androidfilehost.com/?fid=8889791610682907792
Zip Installer Instead of ADB Module maker
Unzip zip into a folder on your internal sdcard. The folder name cannot have spaces in it.
Boot TWRP, find your folder. Install base first. Install the mods you want, then flash complete installation zip. Reboot.
TWRP zip Installer
https://www.androidfilehost.com/?fid=8889791610682907810
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
Android 12
ADB Pixel launcher Uploaded 12-18-21
NexusLauncherReleaseADBPixel12.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
------------------------
Android 11
ADB Pixel Launcher Installer uploaded 7-9-21
NexusLauncherReleaseADBPixel4XLJuly.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------
Android 10
ADB Pixel Launcher Installer uploaded 6-18-20
https://www.androidfilehost.com/?fid=8889791610682873110

Tulsadiver said:
snip
Click to expand...
Click to collapse
Thanks for this!
Will this have the Active Edge support built-in like your center clock mod?

ilal2ielli said:
Thanks for this!
Will this have the Active Edge support built-in like your center clock mod?
Click to expand...
Click to collapse
Yes, there are Active edge bases to choose from.

Tulsadiver said:
Yes, there are Active edge bases to choose from.
Click to expand...
Click to collapse
Just finished building a basic mod with Active Edge, center clock with day, and WiFi traffic. Everything works perfectly.
Thanks again!

Hi,
Thanks for this.
I managed to get a center clock , and swap the nav bar around. :good:
If I want to add more things , like changing text colors in qs for example , do I have to make an entire new mymagisk.zip?
I.E. run the base and framework again?
If I do , will I have to run the center clock and nav swap again?
And what happens to the mymagisk.zip?
Does it get replaced , or do I have to delete it before I start again?

Had another thought, will we need to rebuild the module when the monthly updates come like it was in the past?

malybru said:
Hi,
Thanks for this.
I managed to get a center clock , and swap the nav bar around. :good:
If I want to add more things , like changing text colors in qs for example , do I have to make an entire new mymagisk.zip?
I.E. run the base and framework again?
If I do , will I have to run the center clock and nav swap again?
And what happens to the mymagisk.zip?
Does it get replaced , or do I have to delete it before I start again?
Click to expand...
Click to collapse
Yes, you have to redo everything you did previously and add the new ones as well. Apks can only be modded once in magisk so it has to be done over. The module.prop remains the same. mymagisk.zip will be over-written and once flashed, the module will be replaced. No need to remove. What I do is rename my mymagisk.zip to something else and leave it in case I want to use it again. Again, the module prop is the same so it will over-write what is currently installed.

ilal2ielli said:
Had another thought, will we need to rebuild the module when the monthly updates come like it was in the past?
Click to expand...
Click to collapse
Depends on what changes. Lots of times the SystemUIGoogle.apk and framework-res.apk are left unchanged in updates. But if it changes, I'll have to build and upload another new updated ADB Installer.
Edit: that is why I try to put dates on my uploads.

Tulsadiver said:
Yes, you have to redo everything you did previously and add the new ones well. Apks can only be modded once in magisk so it has to be done over. The module.prop remains the same. mymagisk.zip will be over-written and the once flashed, the module will be replaced. No need to remove. What I do is rename my mymagisk.zip to something else and leave it in case I want to use it again. Again, the module prop is the same so it will over-write what is currently installed.
Click to expand...
Click to collapse
OK , thanks.
I actually find this method easier than faffing around in TWRP.
Good idea to keep the ready made "mymagisk.zips" for future re-use

malybru said:
OK , thanks.
I actually find this method easier than faffing around in TWRP.
Good idea to keep the ready made "mymagisk.zips" for future re-use
Click to expand...
Click to collapse
Yes and if someone likes your setup you can share your ready made zip with someone else. I make them for people all the time as this can be difficult for some people and also the ADB Installer is a large zip. Some people have poor internet connections.

Tulsadiver said:
Depends on what changes. Lots of times the SystemUIGoogle.apk and framework-res.apk are left unchanged in updates. But if it changes, I'll have to build and upload another new updated ADB Installer.
Edit: that is why I try to put dates on my uploads.
Click to expand...
Click to collapse
Got it. Thanks!

Sorry to double post, but have you @Tulsadiver heard anything about the Active Edge Magisk module support causing slow downs, freezes, and needing to hard reboot to get the phone responding again?
A post in Freak07's kernel thread theorizes that: https://forum.xda-developers.com/pi...aq-1-0-0-pixel-4-xl-aka-t3992213/post80749011
After removing the Active Edge support from your mods and moving to flar2's Button Remapper fixed the issue for me so far.
Any thoughts as to why the Active Edge modifications would cause issues for Pixel 4's?

ilal2ielli said:
Sorry to double post, but have you @Tulsadiver heard anything about the Active Edge Magisk module support causing slow downs, freezes, and needing to hard reboot to get the phone responding again?
A post in Freak07's kernel thread theorizes that: https://forum.xda-developers.com/pi...aq-1-0-0-pixel-4-xl-aka-t3992213/post80749011
After removing the Active Edge support from your mods and moving to flar2's Button Remapper fixed the issue for me so far.
Any thoughts as to why the Active Edge modifications would cause issues for Pixel 4's?
Click to expand...
Click to collapse
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.

Tulsadiver said:
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Click to expand...
Click to collapse
Thanks for the tip, I'll look for the telegram thread.

Tulsadiver said:
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Click to expand...
Click to collapse
@Tulsadiver you offer your mods for every available build?
10.0.0 (QD1A.190821.007, Oct 2019) Link 04b0499db27c14335dd01f5036225c1bb30132dfc786fbc1ee579af64e138351
10.0.0 (QD1A.190821.011, Oct 2019) Link f4d0cfd109d2ea5e4f3e807df5350edc26aede247ea2e0f5c2e338afd7a83c62
10.0.0 (QD1A.190821.011.C4, Oct 2019) Link dd397091f50f3196f39df636cf6cad53ef82fc5c066db3d39fbb7343f53d2045
etc?
Also all files are on the branch now. You can pull them from there: https://github.com/Magisk-Modules-Repo/active_edge_system_mod/tree/Files

j to the 4n said:
@Tulsadiver you offer your mods for every available build?
10.0.0 (QD1A.190821.007, Oct 2019) Link 04b0499db27c14335dd01f5036225c1bb30132dfc786fbc1ee579af64e138351
10.0.0 (QD1A.190821.011, Oct 2019) Link f4d0cfd109d2ea5e4f3e807df5350edc26aede247ea2e0f5c2e338afd7a83c62
10.0.0 (QD1A.190821.011.C4, Oct 2019) Link dd397091f50f3196f39df636cf6cad53ef82fc5c066db3d39fbb7343f53d2045
etc?
Also all files are on the branch now. You can pull them from there: https://github.com/Magisk-Modules-Repo/active_edge_system_mod/tree/Files
Click to expand...
Click to collapse
Cool! Yes sir, all capable Pixel builds. I swear I looked before but couldn't find them.

Uploaded new ADB Installers. Nov update.

Hi. Thanks for you good work
Q: If I use your installer to install some mods and want to edit or change the mods just i install ADB again without wipe anything?
And what if I want back to STOCK without wipe my data?
I want install your installer just for Swipe Navigation Old that coming with Pixel 3 or if you have time to make zip for me
Sorry for my English
Edit: Just i downloaded all files and i see everything is so easy [emoji16]
Sent from my Pixel 4 XL using Tapatalk

1- Flash SystemUI Bases Stock like
2- Flash Framework Bases - Stock like base
3- I choose what I want ( clock center - Navber swap - small LTE ) And from ADB launcher just remove weather Then I see the zip files ( mymagisk.zip - mymagisklauncher.zip ) in my phone in folder name: vrthemeADBmagisk I flashed vis Magisk Manager. Sure I reboot the phone but nothing changed?
Sent from my Pixel 4 XL using Tapatalk

DinarQ8 said:
1- Flash SystemUI Bases Stock like
2- Flash Framework Bases - Stock like base
3- I choose what I want ( clock center - Navber swap - small LTE ) And from ADB launcher just remove weather Then I see the zip files ( mymagisk.zip - mymagisklauncher.zip ) in my phone in folder name: vrthemeADBmagisk I flashed vis Magisk Manager. Sure I reboot the phone but nothing changed?
Click to expand...
Click to collapse
Did you run 30 - Complete Installation?
You should end up with the module zip in a folder name ozop. That's where mine end up.

Custom ADB Magisk Module Mod

Most of my mods are SystemUI mods and so if more than one is flashed, only the first one works. This ADB mod was created so a person could pick and choose what he wants and have it all in one module. That being said, I don't have this phone and this particular mod has not been tested by me (though I have similar mods on several other Pixel phone forums). You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so. THIS ONLY HAPPENS ONCE. If you miss the popup you will have to go into Magisk manager and give shell root permission there.
The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer. There is already a Pixel Launcher mod here but this is here fir those that don't want to use substratum.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. Starting from the top (usually best), select the mods you are interested in. Once completed, select the "Finish building module" Option. This will create a Magisk Manager flashable zip (mymagisk.zip) in a folder on your sdcard called ozop. Flash that to install your custom module.
Instructions.
1. Unzip the enclosed zip file onto your PC
2. ADB debugging in developers Enabled
3. Run TulsadiverModsInstallerStock.bat (Give ADB Shell Root Permissions. If missed on first opportunity, turn on in magisk manager, superuser)
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work. The only difference between the two bases is that you can change the color of the QS pulldown circle colors on the "color" base. Plus the "off" circle color isn't grey but instead the same as the "on" color only darker/dimmer.
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Height Options
Navbar Swap
Remove NavBar
3 Minit Battery
Battery Bar Mod
Remove Battery icon, leave percentage
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 4-7, 3 is stock
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Change QS pulldown circle color (for "colored" base)
Smaller Statusbar
Remove white gestures home_handle bar
Note Added a couple of wifi and data signal options.
WiFi 1 and Cell Tower 1
https://imgur.com/a/Tz8MY7x
WiFi 2 Cell Tower 2
https://imgur.com/a/aKZZjGm
WiFi 3 data 3
https://imgur.com/a/bYws0jB
Includes a batch (.bat), and powershell installers, one for windows, one for linux. I don't have a linux computer so the linux Installer could have bugs.
If you chose "Small Statusbar", you are not done yet You have to go to settings system/developer options/Display Cutouts and choose the last option, "waterfall cutout" in order for your mod to look right.
ADB method
Android 12.1
Uploaded 6-18-21
June update
https://mega.nz/file/9UR0HQDZ#K4fr5joozKMzcWLwM_afRjWUwqVwR8IKjG02QLsiPFA
Zip method
Android 12.1
Uploaded 6-18-21
June update
File on MEGA
mega.nz
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
ADB Pixel Launcher Installer uploaded 6-18-21
Says 4XLbut should work on most, if not all, Pixels.
NexusLauncherReleaseADBPixel4XL.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com

Themes / Apps / Mods [MOD][MAGISK][ANDROID 12] Addon Features for Pixel Devices - Pixel 6 Pro Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
What is this?
This is a Magisk module that adds the following cool custom features to any Pixel device (from 3a to 6 Pro) running stock Android 12 Pixel ROM:
Enable/Disable Google Sans font system wide
Adds Icon Styles and Icon Shapes overlays from Android 11
Fonts options
Enable/Disable Combined signal icons
Pixel 6 Wallpapers (requires an extra module, please check downloads section)
Adds 2 button mode navigation (it was removed on Android 11 but I think some users like that navigation mode, so I add it)
Adaptive sound options
Enable Voice access for all Pixel devices
Navigation bar options (reduce keyboard bottom space size, completely remove NavBar, invert layout*, set back gesture height*)
Enable/Disable SystemUI Tuner
Enable Game Overlay for all Pixels by default (although, if something goes wrong while playing games, you can disable this feature)
Enable/Disable dual tone battery meter (it only works on icon portrait mode)
Enable/Disable showing the number of unread messages on status bar notifications
Reduce Status bar height (and option to correct left padding on devices with the notch on the left)
Enable/Disable more themed icons on launcher (some apps don't have a themed icon so it won't work for all apps)
Enable/Disable left shortcut on Lock screen
Enable/Disable camera shortcut on Lock screen
Enable/Disable gradient effect on QS Tiles and Brightness slider
Hide gestures navbar pill (using transparency)
Colorize gestures navbar pill with dynamic accent color
Dark Themes from Android 11 Addon Features
Choose QS number of rows
Brightness slider padding and thick track options
Enhanced Google Dialer (to enable stuff like Call Recording and etc.)
Enhanced Smart Space (to enable stuff like Flashlight, Earthquakes options, etc.)
Enables some newer Pixel features to older Pixel devices (things like Live Translate, Haptic feedback settings, etc.)
Enable/Disable option to reduce QS Tiles text size (works better on some QS Tiles themes)
Option to install Tap Tap (a great app for devices without Quick Tap and even for the ones that have it)
These next features, also included in the MOD, indicates that framework-res and/or SystemUI were modded. This means that these next features will only work on devices running stock Android 12 Pixel ROM. I'll talk more about this later.
Enable/Disable Wifi + Cell QS Tiles instead of single Internet QS Tile
Battery Styles
Clock Customization
Network Traffic Indicators
QS Battery percentage independent options (show estimate time remaining or just percentage)
Dual tone Light/Dark themes for Quick Settings Panel and Power Menu
Album art on lock screen options
Music visualizer options
QS Quick pulldown with one finger (options are off, drag from the top left, drag from the top right and drag from anywhere on the top)
Revamped Screenshot service (it allows us to delete screenshot as soon as we take it and we can enable/disable screenshot shutter sound)
Show/Hide QS Edit icon on QS footer
Show/Hide Quick access Developer options icon on QS footer
Quick access Rom Control app by long pressing on QS Footer Settings icon
Edit Back gesture navigation height
Enable/Disable inverted layout for 2 and 3 button navigation modes
Enable/Disable carrier text on lock screen
Date, clock and battery click actions on QS Header (long click on clock goes to system time settings, simple click opens clock app)
QS Tiles animations and vibration options
Disabled icon blacklist on both status bar and lock screen(the icons can be disabled using SystemUI Tuner for those who don't want some icons to appear anywhere)
Override feature flags (This allows us to override feature flags manually using setprop persist.sysui.flag."whatever_flag_we_want" command)
Use 4G instead of LTE option
Resize navbar pill (normal, medium, big)
Tap to add or remove tiles in QS customizer
Enable/disable QQS Brightness slider
Enable/disable default QS Brightness slider
Auto brightness QS icon (on/off)
Brightness slider position (Top, Bottom)
Double tap to sleep on status bar
Double tap to sleep on lock screen
Enable/disable Double-line clock on lock screen and AOD
Enable/disable circle background on lock screen fingerprint icon (it only does anything on devices that have it, obviously)
Force accent color on ripple animation while unlocking with fingerprint
QS Tiles Styles
Edge Sense Plus MOD (it only works on devices with active edge sensor)
Battery Bar
-------------------//------------------
Rom Control app (to setup all these options)
Downloads:
Download latest module version from HERE! Further updates can be done using Magisk Manager.
Spoiler: Click to know more.
For more info about updates, please read THIS POST.
Addon_Features_for_Pixel_More_Live_Wallpapers.zip
Spoiler: Optional module. Click to read more.
This is an optional module. I've decided to remove everything regarding wallpapers from Addon features main module and create this one.​​I thought that it wouldn't make much sense to have a single module with almost 500 MB. So, this new optional module adds Pixel 6 static and live Wallpapers (obviously redundant for Pixel 6 users...) but, as well, it adds other Live Wallpapers that aren't normally available for download on Wallpaper & Style app (old stuff like doodle, conveyer belt, etc. from older pixels).​
Notes:
Spoiler: Please read them at least once. THEY'RE IMPORTANT!!
Since V17 the installer mod detects if your device runs into a boot loop after flashing it. If it does, and this will happen on any device not running stock Android 12 Pixel ROM, it will force a new reboot and will try to boot your device running a mod "Lite" version. The "Lite" version is nothing more than a mod version where the only features available are the ones above the red line text.
If you want those "exclusive features", the ones after the red line text, working on your current ROM you will have to port them yourself. I explain how to later on this post.
Those "exclusive features" are based on xml and smali changes made on stock SystemUI and framework-res. Without these changes the, "exclusive features" won't work.
Since this module replaces stock SystemUI and framework-res for modded ones, you could run into problems if some other module tries to do the same or it's simply incompatible with it. If you want to try any other mod that changes SystemUI, or framework-res, there's an option on ROM Control that allows you to disable those "exclusive features". After disabling them, your Pixel device will reboot with a "Lite" version as well.
Make sure that you're able to run adb shell as root before flashing this module and reboot your device. Just in case something went really wrong and you need to remove the module manually.
If your device really refuses to boot, after flashing this mod, connect your phone to your PC during boot and run this:
Code:
adb shell
​
Code:
su
​
Code:
rm -rf /data/adb/modules/AddonFeaturesForPixel/system/framework/ && rm -rf /data/adb/modules/AddonFeaturesForPixel/system/system_ext/ && reboot
​
This will only remove framework and systemui "modded" files. Without them, you're device will boot and the other features, that don't require modding, will work just fine.​​In fact, if you remove these files from the module zip before flashing, you can flash that modified zip on any device running any AOSP, or close to it, ROM.​​In case you want to completely remove the mod, you can just run this:​​
Code:
adb shell
​
Code:
su
​
Code:
rm -rf /data/adb/modules/AddonFeaturesForPixel/ && reboot
​
If you forgot to enable the ability to run adb shell as root, and if your device fails to boot, you can fix that by removing all Magisk modules you have installed. That can be achieved by running the following commands even without root shell during boot:
Code:
adb shell
​
Code:
magisk --remove-modules
​​
If none of the above methods work to get your device booting, then you have to boot into safe mode. By doing so, Magisk will disable all modules for you (it doesn't uninstall them, just disables them). To force a boot into safe mode all you need to do is to keep pressing volume down button during boot animation. After the system boots into safe mode you can reboot your device to boot up normally (since all modules will be disabled). If you get stuck during boot animation again, just force another reboot (I've had to do that during my tests).
When a new OTA update comes it's possible that the MOD will force boot with Lite version. Why? Because Google may change things on stock SystemUI and/or framework-res between builds. When that happens, I have to recreate the module again to adapt those changes. Rest assured that I'll always test the module with new builds and update as necessary.
In case your device gets caught in a boot loop, please provide me a logcat so I may try and look if anything can be done about it. To do so, during boot connect your device to your PC and grab a logcat with this adb command:
Code:
adb logcat > log.txt
After grabbing the log, please open the txt file and search for "FATAL". Afterwards post here the lines where the "Fatal error occurred".
I've made these modules for my personal use and just decided to share with all XDA community. Having this in mind, there's no need for donations (although I won't refuse them if you want to buy me a beer). As for requests or whatever, I can only add more stuff when, and if, I have time for it. I'm a really busy man in real life so I can't promise anything nor ETAs.
Requirements:
Unlocked bootloader
Magisk Root | Magisk Manager
Stock December 2021 Android 12 Pixel ROM build, or later until February 2022 for "FULL" version compatibility
Any AOSP, or close to it, Android 12+ ROM on any device for "LITE" version only (not fully tested...some devices/ROMs may not work)
If you are already running Android 12 March build please READ THIS POST and THIS POST as well.
Suggestion:
Uninstall all other modules you may have installed before installing this. They could be incompatible with the module thus making the device get caught in a boot loop. You may install them afterwards, one by one, just to make sure everything is ok.
If you're up to it, instead of disabling/removing modules, I recommend you to flash latest stock build through fastboot using flash_all.bat. In order to retain your data, remove the "-w" flag from the update command on flash-all script.
How to install?
Flash "Addon Features" module
Reboot device
If your device/ROM is fully compatible, everything will be ok at first boot
If not, your device will auto-reboot after first failed boot attempt and boot again with the Lite version only
Have fun!
How to update?
Open Magisk Manager app
Press the update button on"Addon Features" module
Reboot device
Have fun!
Video:
Spoiler: Click to see the video
You may check what to expect from this module HERE.
Note that this video was recorded when I've made this for Android 11. Some features may not be present for Android 12 and others can be that didn't exist for Android 11. The video is here only for those, who have never tried this on Android 11, may understand what to expect.​
How's these "exclusive features" even possible?
Spoiler: Click here if you're interested on learning how this works
All "exclusive" features that you see on the list above were reverse engineered from Proton AOSP and Evolution X ROM source code. The source code is available on the links bellow shown on the credits. This means that I've been practicing some hard core "old school" Android smali edition in order to get this working. So, yes, I have some credits about this but, if it weren't for the original developers and it's public source code, none of this would be possible. Thank them for this!
Smali, and xml, edition wasn't enough to get this working. After decompiling, changing/adapt the code and recompiling everything again, I had to find a way to make it bootable without messing with the original apk signature. And here is where VR Theme logic came in handy. So thanks for the original dev who brought us this feature.
As for ROM Control app....this was/is a project created by daxgirl and wubydax back in 2015! So yeah, I'm not bringing anything new here, I just followed their instructions in order to get the features working after editing smali/xml with the source code taken from PAOSP and Evolution X. The original app source code is also available on the link shared on the credits.
I've just combined all of the above into a Magisk Module and shared here so that we can get the best of both worlds....a stock ROM with custom features included.
Rom Control with "exclusive features" source code:
https://github.com/ElTifo/CustomSettingsForDevs/
Want to port the "exclusive features" to your Pixel device running on other ROM? Here's how:
https://github.com/ElTifo/CustomSettingsForDevs/tree/Pixel4a_Android12/app/src/mods
Credits:
Proton AOSP ROM team, specially @kdrag0n for all his work on Dual tone light/dark themes and other Proton AOSP helpfull commits.
EvolutionX ROM team, specially @joeyhuab
@daxgirl and @Wuby986 for ROM Control project and source code.
@Tulsadiver for showing me how to adapt VR Theme logic originally used on 3Minit Battery Mod by @gharrington.
@Ticklefish for Tickle My Android
@topjohnwu for Magisk
@Freak07 for Adaptive Audio
@trzpro for More themed icons on launcher mod
@Liranazuz5 and @roirraW "edor" ehT for all support and testing stuff.
@siavash79 for all help regarding module installation scripts and update feature from Magisk.
@iamlooper for At a glance enhancer module and it's install/uninstall logic which was adapted to Addon Features
Cheers and enjoy!

Hi @Typhus_ thanks for the mod, I just installed and no rom control is present. I looked in the zip and it's not present either. Can you post the apk? Or does it need to be installed as a system app?

antiochasylum said:
Hi @Typhus_ thanks for the mod, I just installed and no rom control is present. I looked in the zip and it's not present either. Can you post the apk? Or does it need to be installed as a system app?
Click to expand...
Click to collapse
You've flashed both modules?
Rom Control is only on the Addon features module.
Please have in mind that this MOD is composed by 2 modules. One that adds some stuff that doesn't require SystemUI modification, and adds Rom Control app, and another that adds the SystemUI modifications.
Probably you've just flashed the SystemUI...right?
Cheers!

Typhus_ said:
You've flashed both modules?
Rom Control is only on the Addon features module.
Please have in mind that this MOD is composed by 2 modules. One that adds some stuff that doesn't require SystemUI modification, and adds Rom Control app, and another that adds the SystemUI modifications.
Probably you've just flashed the SystemUI...right?
Cheers!
Click to expand...
Click to collapse
Wow, lol. It's early. Flashing both now. Thanks!

Thanks to all the tinkerers who make our lives easier and contribute towards gaining back control of our own devices
One tweak suggestion is a resizable gesture bar pill based on battery percentage reducing dead space on either side

Tnx, works also great on the regular 6 serie

If you forgot to enable the ability to run adb shell as root
My apologies if this is a stupid question, but how do you do this ?

s3axel said:
If you forgot to enable the ability to run adb shell as root
My apologies if this is a stupid question, but how do you do this ?
Click to expand...
Click to collapse
Eh eh eh...
Connect your device to your PC then run:
Code:
adb shell
Code:
su
And give the terminal the root permission.
Done.

Typhus_ said:
Eh eh eh...
Connect your device to your PC then run:
Code:
adb shell
Code:
su
And give the terminal the root permission.
Done.
Click to expand...
Click to collapse
Ah, my apologies - I misunderstood your instructions in OP and though there needs something else to be done to enable this prior to using it as it states "during boot", so I though its still in Bootloader stage....

s3axel said:
Ah, my apologies - I misunderstood your instructions in OP and though there needs something else to be done to enable this prior to using it as it states "during boot", so I though its still in Bootloader stage....
Click to expand...
Click to collapse
Same. I installed it and the got stuck with a black screen. Now I can't grant the terminal su and I can't remove the module without su. Only way I can boot now, is with the stock image.

aryehzev said:
Same. I installed it and the got stuck with a black screen. Now I can't grant the terminal su and I can't remove the module without su. Only way I can boot now, is with the stock image.
Click to expand...
Click to collapse
Have you tried one of the other methods I've explained in order to uninstall the modules?

Typhus_ said:
Have you tried one of the other methods I've explained in order to uninstall the modules?
Click to expand...
Click to collapse
If I'm unrooted I can boot but I have no way of removing modules, if I'm rooted my device boots with a black screen and su from adb shell fails because the magisk root prompt does not show up.
Any other ideas other than wiping my data?

aryehzev said:
If I'm unrooted I can boot but I have no way of removing modules, if I'm rooted my device boots with a black screen and su from adb shell fails because the magisk root prompt does not show up.
Any other ideas other than wiping my data?
Click to expand...
Click to collapse
As soon as you root your device again, you could apply any of the other solutions I've talked about.

Typhus_ said:
As soon as you root your device again, you could apply any of the other solutions I've talked about.
Click to expand...
Click to collapse
When I root my device again the magisk modules are still installed from before and I cannot boot or do anything with my root access

aryehzev said:
When I root my device again the magisk modules are still installed from before and I cannot boot or do anything with my root access
Click to expand...
Click to collapse
While stuck on boot, connect the device to your PC. You'll be able to run adb commands. OR, boot the device in safe mode. Magisk will disable all modules for you.

Typhus_ said:
While stuck on boot, connect the device to your PC. You'll be able to run adb commands. OR, boot the device in safe mode. Magisk will disable all modules for you.
Click to expand...
Click to collapse
While on the black screen I can run adb but not as root because the magisk root prompt never shows up. I'll try the safe mode option.

aryehzev said:
While on the black screen I can run adb but not as root because the magisk root prompt never shows up. I'll try the safe mode option.
Click to expand...
Click to collapse
Yes, but you can run the command:
Code:
magisk --remove-modules
That one doesn't require root.

Typhus_ said:
Yes, but you can run the command:
Code:
magisk --remove-modules
That one doesn't require root.
Click to expand...
Click to collapse
I'll try that.

Wow lots of fun stuff to play with here! Kudos

Hey man @Typhus_ nice to see you here I loved your mods for my Pixel 5 will try flashing this when I get home from work and I can't wait til more stuff be added. Good luck with everything