Bases other than stock-like comes with right clock but you can change it.
Stock like bases are limited to as what can be modded if you choose them. I suggest starting with first selection on SystemUI base and framework gray (color of QS Icons) instead of stock-like and making changes from there.
DARK MODE- If you want to use dark mode, flash SystemUI stock like base but no framework base. You can't change QS Columns or any color mods. Clocks, internet speed, batteries, etc is all
Zip Method to be Flashed in TWRP.
I put together a zipped folder of individual installs that can be flashed from TWRP. Take this zip and unzip it on to your internal sdcard. There are folders with descriptions of what is inside. Each mod is flashed individually and the same rules apply such as bases for SystemUI and framework must be flashed first , etc. There is a "Complete installation" zip to flash after bases and mods are selected. Nothing is installed until you flash it. There is an option for regular installation or magisk module type installation. The magisk version isn't actually a module but shows up as one in magisk manager after flashing.
Sizing for Custom batteries and custom Text batteries are hit and miss. Just re-flash the custom battery to reset or try another size if needed.
Install minitbatteryresources.apk prior to flashing 3Minit Battery Mod.
I only support my zip method of installation now. Aroma quit working on newer phones like Pixel 3 series.
Zip Method
Root required
Instructions.
1. Unzip Zip Installer into a folder of your choice on your sdcard.
2. In TWRP, find the folder you unzipped it to.
3. First select a SystemUI base (the bases have to be installed for mods to work).
4. Select one of the Framework Bases
5. Flash any and all mods you want (individually, don't flash by adding zips in TWRP in series).
6. Flash complete installation zip.
List of MODS Available
1. Clock Format and Position Mods
2. Internet Traffic Speed Single Indicater, only the strongest signal shows
Internet Traffic Speed in and out, one over the other
3. Dynamic Navbar
4. Navbar Height Options
5. Remove NavBar Completely
6. Battery percent text Only-Battery Icon Removed system percent
7. 3 Minit Battery
One percent custom battery Mods-Several to choose from
8. Colored Navbar Icons
9. Traffic Speed Indicator Up Icon Colors
10. Traffic Speed Indicator Down Icon Colors
11. Colored Statusbar Icons
12. Colored Notification backgrounds
13. Colored Notification Text
14. Colored QS Icon Text
15. Colored QS background
16. Remove Carrier Text Options
17. QS Columns (How Many) Option
18. Smaller home button dots
19. Settings Background Color
20. Lockscreen wallpaper tint remover
21. Remove QS Icons Circles
22. Change QS Icons OFF color
23. Ability to change QS Icon circle background colors
24. Fonts
25. Pixel Launcher Mods now included
26. Custom Text batteries 3 Font styles. Bases come with different sizes.
a. Droid thin
b. Google sans thin
c. Google sans medium
27. Custom battery sizing.
Example of what you see
Main menu
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clock Mod menu
Zip Installer Android 10 Dec update uploaded 12-7-19
https://www.androidfilehost.com/?fid=4349826312261654709
Pixel Launcher Zip Installer Android 10 Dec update
https://www.androidfilehost.com/?fid=4349826312261654003
Looking forward to giving it a try! Thanks
So, if I want to use the magisk version on dp2 I have to flash the DP2 aroma and then the magisk version?
I think I don't have fully understood
TENN3R said:
So, if I want to use the magisk version on dp2 I have to flash the DP2 aroma and then the magisk version?
I think I don't have fully understood
Click to expand...
Click to collapse
No, the magisk version is a stand alone Aroma installer for those on Magisk. Same mods but instead of directly installing the mods it creates a TWRP Magisk flashable zip on your sdcard in a folder called Magisk. Once the aroma installer has finished and while still in TWRP, go find and flash that zip then reboot.
Is it possible to have power button function on the navbar in portrait mode? I can't seem to find it.
Cheers
Sent from my Google Pixel using XDA Labs
@Tulsadiver Been trying to make this work all day without any luck. I'm on Android P DP2 and tried the magisk version and in magisk manager it says that "it's not a magisk module"... and in twrp I'm getting syntax error. So I tried the normal aroma in twrp and I choose the first option for base and then nothing else just to get the 4 column and after I reboot I keep getting into a bootloop back into twrp everytime. I tried earlier to get the other bases and also restore stock but nothing works. it just kicks me back to twrp every time. lastly I reflashed android P DP2 factory image and then gave it a go again to be on a clean system and it still kicks me back to twrp and not into the system. Are you able to see what I've been doing wrong?
Arju said:
@Tulsadiver Been trying to make this work all day without any luck. I'm on Android P DP2 and tried the magisk version and in magisk manager it says that "it's not a magisk module"... and in twrp I'm getting syntax error. So I tried the normal aroma in twrp and I choose the first option for base and then nothing else just to get the 4 column and after I reboot I keep getting into a bootloop back into twrp everytime. I tried earlier to get the other bases and also restore stock but nothing works. it just kicks me back to twrp every time. lastly I reflashed android P DP2 factory image and then gave it a go again to be on a clean system and it still kicks me back to twrp and not into the system. Are you able to see what I've been doing wrong?
Click to expand...
Click to collapse
You did nothing wrong. Updater-script error. I uploaded a new Magisk one in op. Try it. I can't test it at the moment. Computer problems.
Tulsadiver said:
You did nothing wrong. Updater-script error. I uploaded a new Magisk one in op. Try it. I can't test it at the moment. Computer problems.
Click to expand...
Click to collapse
I'll try it later on today and report back
Just to be sure, do I flash the magisk one in twrp and then go through aroma and then it creates a zip in a magisk folder and then I flash that in twrp or am I supposed to use the magisk version of your mod in magisk manager and will aroma start from there crating a zip that needs to be flashed in twrp?
In aroma I saw that there are a couple of bases but the first one and the on that says that it's base stock, is there any difference?
Arju said:
I'll try it later on today and report back
Just to be sure, do I flash the magisk one in twrp and then go through aroma and then it creates a zip in a magisk folder and then I flash that in twrp or am I supposed to use the magisk version of your mod in magisk manager and will aroma start from there crating a zip that needs to be flashed in twrp?
In aroma I saw that there are a couple of bases but the first one and the on that says that it's base stock, is there any difference?
Click to expand...
Click to collapse
Everything is done through TWRP. This is not a module though after flashing the Magisk zip it will show up in magisk manager as a module so you can disable it like a module.
There is a base that has clock on the right, 4 column QS, one that is the same but wifi-data has up-down arrows, one that is stock like with left hand clock and 3 column QS, one that is the same but has up-down arrows.
Tulsadiver said:
Everything is done through TWRP. This is not a module though after flashing the Magisk zip it will show up in magisk manager as a module so you can disable it like a module.
There is a base that has clock on the right, 4 column QS, one that is the same but wifi-data has up-down arrows, one that is stock like with left hand clock and 3 column QS, one that is the same but has up-down arrows.
Click to expand...
Click to collapse
It works now. Thank you!
Maybe a stupid question, but what about gapps? included? or need openGapps 8.1?
LoeWn said:
Maybe a stupid question, but what about gapps? included? or need openGapps 8.1?
Click to expand...
Click to collapse
this is not a rom. this is a mod that you flash on top of Android P dp2 and it will give you the option to add those features mentioned in the first post. so make sure you're on android P dp2 before you flash this.
DP3 is up. Magisk version will come later.
LoeWn said:
Maybe a stupid question, but what about gapps? included? or need openGapps 8.1?
Click to expand...
Click to collapse
This is for stock rom. So , dun need gapps
I'm unable to download the system image of for because I'm at the lake but if someone can upload the systemUIGoogle.apk and framework-res.apk I can get started on it.
Will this work on p Aug release?
Kanuk said:
Will this work on p Aug release?
Click to expand...
Click to collapse
The other Pixels have but I haven't tested this one.
Tulsadiver said:
The other Pixels have but I haven't tested this one.
Click to expand...
Click to collapse
Works great,thanks
Uploaded new Aroma's
How would I go about flashing this? Do I start by flashing the aroma installer, then the included Magisk? Does that mean I can't use the latest Magisk?
Related
I have this on the Pixel thread but it should work on the Pixel XL too. Based on July update and for stock based ROMs. If you plan on installing the 3Minit battery mod you must first install the 3Minit Resources app below.
The regular Aroma installs each mod as you go. You must flash one of the bases at the bottom of the list before you install any of the other mods. These contain the smali files and some modded xml files.
Correct method regular Aroma
You need only flash a base one time. If you flash a base a second time it wipes out all previous mods and you start with a clean base. The different bases affect Internet speed mods only. If you are not interested in Internet speed mods, any base will do. Each mod is installed at the time you hit install (unlike the Magisk version where the mods are collected until you are ready to make your module). It pulls your apk, mods it, then reinstalls it. Before you hit finish, you can check the box at the top of the page, then hit finish, and install another mod and keep doing this until you have what you want.
The Magisk Module Maker stores each selection until you are done. You then flash the Magisk Module selection (very first one in the Aroma). It creates a module on your sdcard. When you are out of the Aroma and back in TWRP, go back to install and find the magisk.zip that is in the Magisk folder on your sdcard and flash it. If you left something off or want to change some things, flash Aroma again. After installing the mods you want, select the second option of Module add-on. This will mod your current setup so you don't have to reflash everything over again. The bootanimation, signature check disabler, and louder effect tics don't work on Magisk yet. You can put them in manually through TWRP.
Like I said, these should work but I don't have a Pixel XL so flash at your own risk.
Options
Internet speed - Up over Down- select position far left or to left of Icons on the right side, or center of statusbar. Indicators can be colored individually 6 different colors
Optional internet speed, single line. Strongest signal is shown. Left side, center, and by WiFi placements are available. Same color options.
Clock position - Center Clock not showing on Lockscreen
Dynamic Navbar, 8 sizes
Regular Navbar, 8 sizes
Battery text, with or without Battery Icon
Invisible screen-off Power Menu Button on far right hand side of status bar with option to remove.
Option of Invisible screen-off Power menu button on right side of Navbar in portrait mod and/or on the top side in Landscape mode.
Dpad left and right on the Navbar, poitrait and landscape options.
3Minit Battery
Settings Theme Colors
QS background Theme Colors
Colored Statusbar Icons - 6 to Choose From
Colored Navbar Icons - 6 to Choose From (Matches Statusbar)
Colored notification backgrounds
Colored notification text
Custom one percent battery mod enabler and 7 custom batteries to choose from.
Colored Halo Ring. You can match the other colors if you choose to.
Rainbow Battery
Regular Aroma installer
https://www.androidfilehost.com/?fid=961840155545587531
Magisk Module Maker
https://www.androidfilehost.com/?fid=673368273298977394
3Minit Resources app
https://www.androidfilehost.com/?fid=529152257862670024
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for this, but can not get the aroma work on my XL, already had 3 minit battery mod installed but after using this it does not appear to be working and the only mod I can see working is the change to 4 columns in QS.
Tried to put my systemui back via root explorer now phone not booting, stuck on android is loading..
tried aroma revert to stock ui and still failing.
digitaldazz said:
Thanks for this, but can not get the aroma work on my XL, already had 3 minit battery mod installed but after using this it does not appear to be working and the only mod I can see working is the change to 4 columns in QS.
Tried to put my systemui back via root explorer now phone not booting, stuck on android is loading..
tried aroma revert to stock ui and still failing.
Click to expand...
Click to collapse
What did you flash? Which Aroma?
Edit: I saw where return to stock was messed up and uploaded a new one. I appreciate you trying it out. I still need to know what you flashed.
Regular Aroma installer AromaPixelXL.zip
digitaldazz said:
Regular Aroma installer AromaPixelXL.zip
Click to expand...
Click to collapse
Lol, maybe a hair more detail. What did you flash and about what order.
play store crashing
awesome mod! i am using the magisk aroma installer. everything works great, except one thing. the google play store force closes if any mods are active. i've tried clearing data and wiping cache.
any advice?
bokononfoma said:
awesome mod! i am using the magisk aroma installer. everything works great, except one thing. the google play store force closes if any mods are active. i've tried clearing data and wiping cache.
any advice?
Click to expand...
Click to collapse
Never heard that one. What mods are you running. I'm on the playstore with no problems.
Tulsadiver said:
Lol, maybe a hair more detail. What did you flash and about what order.
Click to expand...
Click to collapse
Trying to get this to work with my XL mate, tried installing the mods several times but the only mod that it changing is the quick settings the nav and status mods don't seem to work, I will keep trying different methods see if I can narrow it down for you.
digitaldazz said:
Trying to get this to work with my XL mate, tried installing the mods several times but the only mod that it changing is the quick settings the nav and status mods don't seem to work, I will keep trying different methods see if I can narrow it down for you.
Click to expand...
Click to collapse
I appreciate the help but I need the order. Which base did you install? A base has to be installed first.
Tulsadiver said:
I appreciate the help but I need the order. Which base did you install? A base has to be installed first.
Click to expand...
Click to collapse
base 0 4
---------- Post added at 06:01 PM ---------- Previous post was at 05:42 PM ----------
digitaldazz said:
base 0 4
Click to expand...
Click to collapse
the permissions of the systemuigoogle.apk in my root folder are changed to 644 is this correct?
digitaldazz said:
base 0 4
---------- Post added at 06:01 PM ---------- Previous post was at 05:42 PM ----------
the permissions of the systemuigoogle.apk in my root folder are changed to 644 is this correct?
Click to expand...
Click to collapse
Yes, that is correct.
Try just installing the bases and nothing else. You might install BusyBox first. Reboot, then flash just the base. Nothing different between these two aromas except for the install method. .
Tulsadiver said:
Never heard that one. What mods are you running. I'm on the playstore with no problems.
Click to expand...
Click to collapse
I tried center clock, battery text, dynamic navbar, and navbar dpad.
bokononfoma said:
I tried center clock, battery text, dynamic navbar, and navbar dpad.
Click to expand...
Click to collapse
Are you on Magisk 13.3 and Magisk manager 5.1.1?
Tulsadiver said:
Never heard that one. What mods are you running. I'm on the playstore with no problems.
Click to expand...
Click to collapse
Tulsadiver said:
Are you on Magisk 13.3 and Magisk manager 5.1.1?
Click to expand...
Click to collapse
Yes. The mods all work but play store won't open. If I disable the magisk module then play store works.
Tulsadiver said:
Yes, that is correct.
Try just installing the bases and nothing else. You might install BusyBox first. Reboot, then flash just the base. Nothing different between these two aromas except for the install method. .
Click to expand...
Click to collapse
the bases seem to work but no colour changes or clock and the 3 minit battery mod gets disabled.
heres my ui
digitaldazz said:
the bases seem to work but no colour changes or clock and the 3 minit battery mod gets disabled.
heres my ui
Click to expand...
Click to collapse
Are you trying to install 3minit through my Aroma or some other method?
digitaldazz said:
the bases seem to work but no colour changes or clock and the 3 minit battery mod gets disabled.
heres my ui
Click to expand...
Click to collapse
That SystemUIGoogle.apk cannot be decompiled.
Tulsadiver said:
Are you trying to install 3minit through my Aroma or some other method?
Click to expand...
Click to collapse
your aroma
digitaldazz said:
your aroma
Click to expand...
Click to collapse
Okay, here is what I did. I flashed back to stock, rerooted with SuperSU instead of magisk, flashed this aroma and installed the base you did, a couple of mods and rebooted. It borked my phone but I have a pixel, not a pixel XL so I expected that. I did however, boot into TWRP, pull off the systemuigoogle.apk before I flashed everything over again and did a factory reset. It looked nothing like the one you gave me and it decompiled just fine. All smalis were there as well as 3 Minit mod. I'm not sure where things are going wrong for you but everything looks fine as far as I can tell. This is what I pulled off. You are welcome to try it.
Edit: I was dumb enough to do this twice. This one has 3minit mod on it. Install the 3minit resources app before using this Systemui
Thank you but it does exactly the same as my systemui, got the 4 column QS but no center clock or 3minit. Can anyone else with a stock rooted xl confirm this as working?
Thanks
1. Install busybox first (please see the Busybox to use below). You won't lose root.
2. You must install one of the bases at the bottom of Aroma before flashing any of the other mods. One has stock WiFi-Data icons on statusbar, the other has up-down traffic arrows included.
After you do those two things, the others can be flashed in any order.
3minit resources app needs to be installed before 3 Minit battery is flashed (please see 3minit app below).
Make a backup first! If for some reason your phone starts to do a factory reset, quickly boot into bootloader, bottom TWRP, and flash the base. This will usually fix it.
Have a backup though individual flashes should make you a backup on your sdcard in a folder called ozop.
The Aroma comes with the following options:
Comes in all bases
Full systemui tuner
Invisible Power button on far right side of Statusbar
Full 4 way rotation
4 column QS tiles
OPTIONAL-up-down traffic arrows
Options
Clock positions and formats
Navbar height adjustment
Navbar Remover
3 Minit battery
Enabled stock WiFi-Data in-out arrows
Rainbow Battery
One Percent Battery Mod with 7 different batteries
Colored statusbar icons
Colored Navbar Icons
Colored Traffic speed meter up over down or separately. Up and down can be different colors.
Colored Notification Backgrounds
Colored Notification Text
Colored QS backgrounds
Colored QS text
Navbar swap of back and recents
Old Nexus statusbar icons option
Navbar remover (completely) 3,4,5,6,7 column QS options
Invisible power menu button in far right hand corner of statusbar. Tap closes the screen, long press brings up the power button menu. Now this option can go either,and, or on the NavBar too.
The 3 Column QS option is a mod. Flash a base first, then 3 Column. There are now mods for 5, 6, or 7 column QS.
If you want Navbar gone, flash the one that matches your Navbar height. Base is 36 dip. There are 3,4,5,6,7 QS column options for Navbar gone. (There is an option near the bottom for putting an invisible Home button on the left side of statusbar for those times when LMT or other 3rd party navbars don't kick in for whatever reason). Then can select other mods. Most everything should be working though probably not all.
Ability to add your own custom NavBar icons:
Instructions:
Make a folder on your sdcard called "custom"
Put the NavBar Icons of choice in it. Don't forget "dark" ones if you want them to change color on light background
If the Icons are material by google, select the option corresponding to your Navbar height. If they are not material, flash "custom icons with no padding" (last option under Navbar height). In order to swap icons you will have to go back and flash aroma again and flash either navbar swap with corresponding navbar height if they are material or custom navbar swap, (last option under Navbar swap) if not material.
8.1 June update - uploaded 6-6-18
https://www.androidfilehost.com/?fid=746163614322269181
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------
8.1 Dec Update-this one only has some of the above mods due to 8.1 cannot be deodexed yet.
Aroma
https://www.androidfilehost.com/?fid=962021903579498033
BusyBox enclosed credits to osm0sis
https://forum.xda-developers.com/showthread.php?t=2239421
Oreo TWRP theme blue XDA. A GML theme but changed to a different color and modded for dual slots. Make a folder called theme in your TWRP folder and drop this UI.zip in it. Good for twrp 3.1.1
https://forum.xda-developers.com/android/themes/theme-twrp-3-0-0-0-themes-t3336457
Dark XDA
Lite Blue XDA
Transparent - This is untouched by me as it was already dual slot ready. You can upload the background png file of your choice. Click a button rather than swipe when installing.
Is this for the ota ? I installed it but couldn't get it to boot.
quinejh said:
Is this for the ota ? I installed it but couldn't get it to boot.
Click to expand...
Click to collapse
Yes, Oreo. Did you flashes BusyBox, then a base first? What exactly did you do? Give me the details.
I had already been running O. I flashed it a couple days earlier. So I downloaded the mod and busy box how ever I had to reflash stock because a couple days ago I installed busy box and lost root so I was afraid of installing this busy box. So I would assume BusyBox is required in order for this to. Then I see an updated BusyBox so I am I to assume that the install process is Flash the mod then install the updated BusyBox. My current setup is stock rooted with Su hide installed. Thanks for the help.
quinejh said:
I had already been running O. I flashed it a couple days earlier. So I downloaded the mod and busy box how ever I had to reflash stock because a couple days ago I installed busy box and lost root so I was afraid of installing this busy box. So I would assume BusyBox is required in order for this to. Then I see an updated BusyBox so I am I to assume that the install process is Flash the mod then install the updated BusyBox. My current setup is stock rooted with Su hide installed. Thanks for the help.
Click to expand...
Click to collapse
You should not lose root by installing this BusyBox. Yes, install this BusyBox (first), then flash Aroma and first thing go to the end of the selections and flash one of the 6 bases. If you are not interested in internet speed meter, it doesn't matter which base you choose. After flashing the base you can then select and flash the individual mods you want. Bases have a Navbar height of 36 dip. Stock is 48. 3Minit resources apk must be installed prior to flashing 3minit mod if you are interested in that.
If you can use your Pixel without SUhide, people say SuperSU SR1 Pixel Fix looks like to work with busybox on Oreo, so you can try if you feel lucky.
this mod its only for pixel? any other phone on Oreo not?
Just installed 4 column QS, rebooted because I didn't realize I could only select one option at a time. Booted back into TWRP, flashed 3 mods (center clock, battery text and remove nav bar) without rebooting once. When it finally booted which took a bit, it instantly did a factory reset thing. It rebooted itself to a try again/ factory reset screen. Tried again, same result.
Going to quickly reflash stock image. If you have any insight as to why it did this, I would appreciate any and all help. If you have any questions for me that can help determine what happened, ask away! This was the last thing I needed to install for my stock oreo to be perfect for me!
GeekMcLeod said:
Just installed 4 column QS, rebooted because I didn't realize I could only select one option at a time. Booted back into TWRP, flashed 3 mods (center clock, battery text and remove nav bar) without rebooting once. When it finally booted which took a bit, it instantly did a factory reset thing. It rebooted itself to a try again/ factory reset screen. Tried again, same result.
Going to quickly reflash stock image. If you have any insight as to why it did this, I would appreciate any and all help. If you have any questions for me that can help determine what happened, ask away! This was the last thing I needed to install for my stock oreo to be perfect for me!
Click to expand...
Click to collapse
I don't have a 4 column qs option. That is stock in all the bases. If you meant you flashed the 3 column option, that is a mod, not a base. The very first thing you flash must be one of the bottom six bases (0-2,0-3,0-4, 250-2, 250-3, 250-4). Just the first time. After that, everything else should work. No need to reboot but it doesn't hurt anything. Without flashing a base first, it will fc every time. BusyBox should be installed before flashing the Aroma.
Tulsadiver said:
I don't have a 4 column qs option. That is stock in all the bases. If you meant you flashes the 3 column option, that is a mod, not a base. The very first thing you flashes must be one of the bottom six bases. No need to reboot but it doesn't hurt anything. Without flashing a base first, it will fc every time. BusyBox should be installed before flashing the Aroma.
Click to expand...
Click to collapse
Oh I guess I didn't add that, I did flash one of the bottom 6, can't remember which one exactly but it had a 4 in it, so I was hoping it meant 4 QS columns. When it did boot, that was all that changed[ I had 4 column QS] before I rebooted to try installing those other 3 and it failed. If you don't even have that option, that's just weird. Busybox definitely was installed already.
GeekMcLeod said:
Oh I guess I didn't add that, I did flash one of the bottom 6, can't remember which one exactly but it had a 4 in it, so I was hoping it meant 4 QS columns. When it did boot, that was all that changed[ I had 4 column QS] before I rebooted to try installing those other 3 and it failed. If you don't even have that option, that's just weird. Busybox definitely was installed already.
Click to expand...
Click to collapse
I don't have a 4 column option because it comes that way in all the bases.
Tulsadiver said:
I don't have a 4 column option because it comes that way in all the bases.
Click to expand...
Click to collapse
Ohh okay, makes sense. Currently in the process of trying it again.
Update: Didn't work again, giving up until tomorrow. Need some video game time. Lol
GeekMcLeod said:
Ohh okay, makes sense. Currently in the process of trying it again.
Update: Didn't work again, giving up until tomorrow. Need some video game time. Lol
Click to expand...
Click to collapse
That combo didn't work for me either. I'm working on it.
GeekMcLeod said:
Ohh okay, makes sense. Currently in the process of trying it again.
Update: Didn't work again, giving up until tomorrow. Need some video game time. Lol
Click to expand...
Click to collapse
.
I apologise, I also have a thread on the Nexus 5X with this same Aroma and botched a copy and replace I did. All center clocks are bad and a couple of other things. I'll let you know when it is finished.
will this work on marlin?
Tulsadiver said:
.
I apologise, I also have a thread on the Nexus 5X with this same Aroma and botched a copy and replace I did. All center clocks are bad and a couple of other things. I'll let you know when it is finished.
Click to expand...
Click to collapse
It's all good. Glad it wasn't me that was doing something stupid. Hope you have it fixed soon! Center clock is basically all I'm missing from 7.1.2 custom roms.
GeekMcLeod said:
It's all good. Glad it wasn't me that was doing something stupid. Hope you have it fixed soon! Center clock is basically all I'm missing from 7.1.2 custom roms.
Click to expand...
Click to collapse
Just posted a new one. Seems to work. I'll do more testing but it looks good.
Tulsadiver said:
Just posted a new one. Seems to work. I'll do more testing but it looks good.
Click to expand...
Click to collapse
Awesome! Didn't expect it that soon. I'll definitely check it out when I get home.
That busybox in attachments works on oreo? I mean, flashing this busybox causes problem like other busyboxes for oreo (root issues) or not?
TENN3R said:
That busybox in attachments works on oreo? I mean, flashing this busybox causes problem like other busyboxes for oreo (root issues) or not?
Click to expand...
Click to collapse
I've had no issues with it.
Edit:. I saw where he had a new one and I just uploaded it but haven't tried it. 1.27.1
I don't have a Pixel XL but I have this working on the Pixel. If someone wants to give this a try, let me know if it works.
1. Install busybox first (please see the Busybox to use below).
2. You must install one of the four bases before flashing any of the other mods. You need only flash a base once unless you want to start completely over. Even if you come back later on, you should be good.
After you do those two things, the others can be flashed in any order. Sometimes best to install clock last if you want a center clock. If you get double icons on lockscreen, flash clock again and that should be fixed (or battery percent if you flashed it and flashing clock doesn't fix it).
3minit resources APK needs to be installed before 3 Minit battery is flashed (please see 3minit app below).
Make a backup first! If for some reason your phone starts to do a factory reset, quickly boot into bootloader, bottom TWRP, and flash a base. This will usually fix it.
The Aroma's come with the following options:
Stock in bases
Full systemui tuner
Invisible Power button on far right side of Statusbar
Full 4 way rotation
4 column QS tiles
Options
Clock positions and formats
Navbar height adjustment
Navbar Remover
3 Minit battery
Enabled stock WiFi-Data in-out arrows
One Percent Battery Mod with 7 different batteries
Colored statusbar icons
Colored Navbar Icons
Colored Traffic speed meter up over down or separately. Up and down can be different colors.
Colored Notification Backgrounds
Colored Notification Text
Colored QS backgrounds
Battery percentage in text format
Dpad option on NavBar to move curser left or right
New Internet speed-separate in and out
Navbar swap of back and recents
Invisible power button on statusbar can be removed and, or put on the NavBar too.
Underlined text in QS pulldown
The 3 Column QS option is a mod. Flash a base first, then 3 Column
Ability to add your own custom NavBar icons:
Instructions:
Make a folder on your sdcard called "custom"
Put the NavBar Icons of choice in it. Don't forget "dark" ones if you want them to change color on light background
If the Icons are material by google, select the option corresponding to your Navbar height. If they are not material, flash "custom icons with no padding" (last option under Navbar height). In order to swap icons you will have to go back and flash aroma again and flash either navbar swap with corresponding navbar height if they are material or custom navbar swap, (last option under Navbar swap) if not material.
8.1 June Update - Uploaded 6-16-18
https://www.androidfilehost.com/?fid=818222786056039216
TWRP theme Done by GML but changed to a different color and modded for dual slots. Works on Pixel's. Make folder called "theme" inside your TWRP folder and drop the ui.zip of your choice in it. For twrp 3.1. and 3.2*
https://forum.xda-developers.com/android/themes/theme-twrp-3-0-0-0-themes-t3336457
Dark XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lite XDA
Transparent - This is untouched by me as it was already dual slot ready. You can upload the background png file of your choice. Click a button rather than swipe when installing.
When I try to download through android file host it's says "oops no mirrors found"
Sent from my Pixel XL using Tapatalk
BHermes211 said:
When I try to download through android file host it's says "oops no mirrors found"
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I put a Mega link option as a backup.
Worked, thank you very much for this!!
Sent from my Pixel XL using Tapatalk
I was spying on this post over in the pixel forum, then saw it on the xda news timeline! Looks great and im about to install now!
BHermes211 said:
When I try to download through android file host it's says "oops no mirrors found"
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
This happens to me alot while using chrome, not sure why. I usually just copy the url and paste it in firefox to download.
Anyone else tried just the remove navbar? Tried from stock twice and I end up in a bootloop
sulpher said:
Anyone else tried just the remove navbar? Tried from stock twice and I end up in a bootloop
Click to expand...
Click to collapse
Did you install busybox first, then flash one of the bases before you flashed remove navbar?
Tulsadiver said:
Did you install busybox first, then flash one of the bases before you flashed remove navbar?
Click to expand...
Click to collapse
Oops guess my busybox version is ****ty.... all fixed now! Thanks a bunch for your mod!! Missed LMT so much.
I used supersu SR3, does this BusyBox work with it? I was reading a few other threads and can't seem to find a definitive answer as to what BusyBox will work with SR3.
Yes it does.
Hi. Thanks for this. Do you have to flash one of the bases before each mod? For instance do you have to flash a base them the 3 Minit mod then flash another base to flash another mod? I can't seem to get the center clock mod and the 3 Minit mod to both stick at the same time.
Nevermind figured it out! This is awesome!
So glad this mod got updated to Oreo... Loved it on my Pixel, works like a charm on the XL!! The cc and 3minit mod are necessary, thanks for updating this dev
I am unable to get this to work.
I flashed busy box, tried 2 of the bases (in case that was my issue) and center clock and semi-transparent notification background and no changes take effect. Am I missing something?
Can you change your OP to give a little bit of information on what Busybox is required and also flash order? Lots of people are going to end up in factory reset with this mod otherwise. Thanks in advance
socioteq said:
Can you change your OP to give a little bit of information on what Busybox is required and also flash order? Lots of people are going to end up in factory reset with this mod otherwise. Thanks in advance
Click to expand...
Click to collapse
The Busybox to be used is included in the very post. Flash it.
The flashing order is to flash one of the 6 bases at the bottom of the Aroma (0-2, 0-3, 0-4, 250-2, 250-3, 250-4)
The others can be flashed after that in any order. Sometimes better to flash clock last if you want a center clock because you can get double icons on lockscreen. If that occurs, flash clock again. Anyone that uses 3minit knows to install the resources app first but that is also explained in first post and the app is included in the first post. If for some reason your phone starts a factory reset, quickly boot to bootloader, boot to TWRP, and flash one of the six bases. This won't work 100 percent of the time but usually will.
Working fine here
Is there a way to remove busybox after installing the mods? or will uninstalling busybox revert them back to stock? I forgot busybox would mess with Samsung Pay and I'd rather have that than these mods even though I really like them. Thanks.
coolhandz said:
Is there a way to remove busybox after installing the mods? or will uninstalling busybox revert them back to stock? I forgot busybox would mess with Samsung Pay and I'd rather have that than these mods even though I really like them. Thanks.
Click to expand...
Click to collapse
You can try this
Is there a way to get the default notifications background and navbar back?
Bases other than stock-like comes with right clock but you can change it.
Stock like bases are limited to as what can be modded if you choose them. I suggest starting with first selection on SystemUI base and framework gray (color of QS Icons) instead of stock-like and making changes from there.
DARK MODE- If you want to use dark mode, flash SystemUI stock like base but no framework base. You can't change QS Columns or any color mods. Clocks, internet speed, batteries, etc is all
ADB Method
1. Unzip ADB Mods Installer Files.zip on your PC
2. ADB debugging Enabled
3. Run TulsadiverModsInstaller.bat (Give ADB Root Permissions). If you are on Windows 10 and this isn't working, try Powershell method install.ps1
4. First select a SystemUI base (the bases have to be installed for mods to work).
5. Select one of the Framework Bases
6. Go through the other options selecting what all mods you want
7. Once finished with selections, run "Complete Installation" at the bottom
ADB method uploaded 4-22-19
https://www.androidfilehost.com/?fid=1395089523397950461
Zip Method to be Flashed in TWRP.
I put together a zipped folder of individual installs that can be flashed from TWRP. Take this zip and unzip it on to your internal sdcard. There are folders with descriptions of what is inside. Each mod is flashed individually and the same rules apply such as bases for SystemUI and framework must be flashed first , etc. There is a "Complete installation" zip to flash after bases and mods are selected. Nothing is installed until you flash it. There is an option for regular installation or magisk module type installation. The magisk version isn't actually a module but shows up as one in magisk manager after flashing.
Sizing for Custom batteries and custom Text batteries are hit and miss. Just re-flash the custom battery to reset or try another size if needed.
Install minitbatteryresources.apk prior to flashing 3Minit Battery Mod.
I only support my zip method of installation now. Aroma quit working on newer phones like Pixel 3 series.
Root required
Instructions.
1. Unzip Zip Installer into a folder of your choice on your sdcard.
2. In TWRP, find the folder you unzipped it to.
3. First select a SystemUI base (the bases have to be installed for mods to work).
4. Select one of the Framework Bases
5. Flash any and all mods you want (individually, don't flash by adding zips in TWRP in series).
6. Flash complete installation zip of your choice.
List of MODS Available
1. Clock Format and Position Mods
2. Internet Traffic Speed Single Indicater, only the strongest signal shows
Internet Traffic Speed in and out, one over the other
3. Dynamic Navbar
4. Navbar Height Options
5. Remove NavBar Completely
6. Battery percent text Only-Battery Icon Removed system percent
7. 3 Minit Battery
One percent custom battery Mods-Several to choose from
8. Colored Navbar Icons
9. Traffic Speed Indicator Up Icon Colors
10. Traffic Speed Indicator Down Icon Colors
11. Colored Statusbar Icons
12. Colored Notification backgrounds
13. Colored Notification Text
14. Colored QS Icon Text
15. Colored QS background
16. Remove Carrier Text Options
17. QS Columns (How Many) Option
18. Smaller home button dots
19. Settings Background Color
20. Lockscreen wallpaper tint remover
21. Remove QS Icons Circles
22. Change QS Icons OFF color
23. Ability to change QS Icon circle background colors
24. Fonts
25. Pixel Launcher Mods now included
26. Custom Text batteries 3 Font styles. Bases come with different sizes.
a. Droid thin
b. Google sans thin
c. Google sans medium
27. Custom battery sizing.
Example of what you see
Main folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clock mod folder
Zip Installer uploaded 5-20-19
https://www.androidfilehost.com/?fid=1395089523397970331
Zip Installer Android 10 uploaded 9-8-19
https://mega.nz/#!YdYBjCBL!_wBNYw3bd0FF2fG0tJ0f0ZSzqhd3LEZqcTRcW5lhMPU
Pixel Launcher Aroma mod Android 10 Sept update
https://www.androidfilehost.com/?fid=1899786940962591408
Does this only work on stock,.
Sorry, just realized it's for P.
Gordietm said:
Does this only work on stock,.
Sorry, just realized it's for P.
Click to expand...
Click to collapse
I have one for N too but yes, it is for stock.
New Aroma's uploaded
Sorry for the probably dumb question, but can the new P/DP2 aroma be installed on 8.1.0 stock with root/bootloader unlocked?
Thanks!
bigw34 said:
Sorry for the probably dumb question, but can the new P/DP2 aroma be installed on 8.1.0 stock with root/bootloader unlocked?
Thanks!
Click to expand...
Click to collapse
dp2 mods are for those on Android P only
Thank you for sharing awesome work!
---------- Post added at 01:49 PM ---------- Previous post was at 01:46 PM ----------
Could you please make 16.4 magisk aroma zip,thank you!
petiolarissean said:
Thank you for sharing awesome work!
---------- Post added at 01:49 PM ---------- Previous post was at 01:46 PM ----------
Could you please make 16.4 magisk aroma zip,thank you!
Click to expand...
Click to collapse
16.3 is for 16.3 on up.
how do we apply 3 minit icons?
dying4004 said:
how do we apply 3 minit icons?
Click to expand...
Click to collapse
First you have to install the minitbatteryresources.apk, then flash the 3minit mod. If you want additional battery icons you must get the 3minit battery apk from playstore.
Tulsadiver said:
First you have to install the minitbatteryresources.apk, then flash the 3minit mod. If you want additional battery icons you must get the 3minit battery apk from playstore.
Click to expand...
Click to collapse
even if i flash the aroma installer zip file will i still have to install those files?
dying4004 said:
even if i flash the aroma installer zip file will i still have to install those files?
Click to expand...
Click to collapse
There is a 3minit mod in the aroma. You must install the minitbatteryresources.apk prior to flashing that mod in the aroma.
[/COLOR]
Tulsadiver said:
There is a 3minit mod in the aroma. You must install the minitbatteryresources.apk prior to flashing that mod in the aroma.
Click to expand...
Click to collapse
thanks mate.
followed these instructions but still 3minit icons doesnt apply.
anything else you can think of that i can try?
its a pixel xl with dp2 and magisk 16.4 and elementalx kernel.
cheers
dying4004 said:
[/COLOR]
thanks mate.
followed these instructions but still 3minit icons doesnt apply.
anything else you can think of that i can try?
its a pixel xl with dp2 and magisk 16.4 and elementalx kernel.
cheers
Click to expand...
Click to collapse
Have you installed and opened magisk manager or just rooted with magisk?
Tulsadiver said:
Have you installed and opened magisk manager or just rooted with magisk?
Click to expand...
Click to collapse
i have magisk manager installed.
do i need to enable anything in magisk manager?
dying4004 said:
i have magisk manager installed.
do i need to enable anything in magisk manager?
Click to expand...
Click to collapse
Then you need to use the Magisk version. Are you flashing the magisk.zip after the aroma is finished?
Tulsadiver said:
Then you need to use the Magisk version. Are you flashing the magisk.zip after the aroma is finished?
Click to expand...
Click to collapse
yes, i am.
dying4004 said:
yes, i am.
Click to expand...
Click to collapse
Are you getting any errors? Do you see the magisk image resize and Evilthemer installing when you flash magisk.zip? I have not heard of any problems with 3minit.
Hey, dp3 is out. Will we need a new aroma installer or do you think the existing one you made will work?
Gordietm said:
Hey, dp3 is out. Will we need a new aroma installer or do you think the existing one you made will work?
Click to expand...
Click to collapse
There were changes so I would wait. Hopefully tomorrow.
The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu. You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so.
Zip installer is installed from your phone, not your pc. You will install the mods through Magisk app. Unzip the Zip Installer onto your internal sdcard. Like ADB installer, start with a SystemUI base. Do not reboot between selections as Magisk as shows after flashing selections (options are found inside the numbered folders). Hit the back button to make your next selection. Do not reboot thru Magisk until after you are done with your selections and have flashed the "Complete Installation" zip.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
Android 11
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
ADB Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Shell Root Permissions. If missed on first opportunity, turn on in magisk manager, superuser)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
Root required
ZIP Instructions.
1. Unzip Zip Installer onto your internal sdcard
2. Flash thru Magisk app. Flash the SystemUI Base First. It provides the necessary smali files and public ID's for everything to work
(Do not reboot between selections as Magisk shows after flashing selections. Hit the back button to make your next selection)
3. Go through the other options selecting the mods you want. It is generally best to start at the top and work your way down.
4. Once finished with selections, flash "Complete Installation" at the top. This will install your selections as a Magisk module.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Swap
Remove NavBar
3 Minit Battery
Battery Bar Mod
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Animations
Fonts (including Lockscreen clock)
Change QS pulldown circle color
Change Status bar Data Icon to a "cell tower" looking icon (see below)
Change QS data icon to a cell tower icon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note Added a couple of wifi and data signal options.
WiFi 1 and Cell Tower 1
WiFi 2 Cell Tower 2
WiFi 3 data 3
Includes a batch (.bat), and powershell installers, one for windows, one for linux. Big thanks to @wrongway213 for doing all the testing
and helping with the linux powershell installer.
Android 12 comes with a more narrow brightness-volume bar option.
This is a SystemUI mod. It's not compatible with other SystemUI mods.
There's just one base now. To change the QS pulldown colors, go to settings/display/device theme at the bottom. The black options change the settings background from gray to black.
---------------------
Zip Installer
Android 12.1
July update
Uploaded 7 -8-22
https://mega.nz/file/cdIFTBJa#Rvktpa0sU6URmGRse-T6LcEUoVDMItxhsHzump-L-f4
ADB installer
12.1
July update
Uploaded 7 -8-22
https://mega.nz/file/RJhCGJAD#BDu5ePwvQnvPYzdMhRo6V993kRJe9H7nr9MXnEacd_o
----------------------
Android 12 - January update
Uploaded 1-8-22
ADB Mod Installer FilesPixel4XL12.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
---------------------------
Android 11
Uploaded 7-9-21
File on MEGA
mega.nz
ADB Mod Installer FilesPixel4XLJuly.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
Android 10
ADB Module maker uploaded 8-6-20
https://www.androidfilehost.com/?fid=8889791610682907792
Zip Installer Instead of ADB Module maker
Unzip zip into a folder on your internal sdcard. The folder name cannot have spaces in it.
Boot TWRP, find your folder. Install base first. Install the mods you want, then flash complete installation zip. Reboot.
TWRP zip Installer
https://www.androidfilehost.com/?fid=8889791610682907810
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
Android 12
ADB Pixel launcher Uploaded 12-18-21
NexusLauncherReleaseADBPixel12.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
------------------------
Android 11
ADB Pixel Launcher Installer uploaded 7-9-21
NexusLauncherReleaseADBPixel4XLJuly.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------
Android 10
ADB Pixel Launcher Installer uploaded 6-18-20
https://www.androidfilehost.com/?fid=8889791610682873110
Tulsadiver said:
snip
Click to expand...
Click to collapse
Thanks for this!
Will this have the Active Edge support built-in like your center clock mod?
ilal2ielli said:
Thanks for this!
Will this have the Active Edge support built-in like your center clock mod?
Click to expand...
Click to collapse
Yes, there are Active edge bases to choose from.
Tulsadiver said:
Yes, there are Active edge bases to choose from.
Click to expand...
Click to collapse
Just finished building a basic mod with Active Edge, center clock with day, and WiFi traffic. Everything works perfectly.
Thanks again!
Hi,
Thanks for this.
I managed to get a center clock , and swap the nav bar around. :good:
If I want to add more things , like changing text colors in qs for example , do I have to make an entire new mymagisk.zip?
I.E. run the base and framework again?
If I do , will I have to run the center clock and nav swap again?
And what happens to the mymagisk.zip?
Does it get replaced , or do I have to delete it before I start again?
Had another thought, will we need to rebuild the module when the monthly updates come like it was in the past?
malybru said:
Hi,
Thanks for this.
I managed to get a center clock , and swap the nav bar around. :good:
If I want to add more things , like changing text colors in qs for example , do I have to make an entire new mymagisk.zip?
I.E. run the base and framework again?
If I do , will I have to run the center clock and nav swap again?
And what happens to the mymagisk.zip?
Does it get replaced , or do I have to delete it before I start again?
Click to expand...
Click to collapse
Yes, you have to redo everything you did previously and add the new ones as well. Apks can only be modded once in magisk so it has to be done over. The module.prop remains the same. mymagisk.zip will be over-written and once flashed, the module will be replaced. No need to remove. What I do is rename my mymagisk.zip to something else and leave it in case I want to use it again. Again, the module prop is the same so it will over-write what is currently installed.
ilal2ielli said:
Had another thought, will we need to rebuild the module when the monthly updates come like it was in the past?
Click to expand...
Click to collapse
Depends on what changes. Lots of times the SystemUIGoogle.apk and framework-res.apk are left unchanged in updates. But if it changes, I'll have to build and upload another new updated ADB Installer.
Edit: that is why I try to put dates on my uploads.
Tulsadiver said:
Yes, you have to redo everything you did previously and add the new ones well. Apks can only be modded once in magisk so it has to be done over. The module.prop remains the same. mymagisk.zip will be over-written and the once flashed, the module will be replaced. No need to remove. What I do is rename my mymagisk.zip to something else and leave it in case I want to use it again. Again, the module prop is the same so it will over-write what is currently installed.
Click to expand...
Click to collapse
OK , thanks.
I actually find this method easier than faffing around in TWRP.
Good idea to keep the ready made "mymagisk.zips" for future re-use
malybru said:
OK , thanks.
I actually find this method easier than faffing around in TWRP.
Good idea to keep the ready made "mymagisk.zips" for future re-use
Click to expand...
Click to collapse
Yes and if someone likes your setup you can share your ready made zip with someone else. I make them for people all the time as this can be difficult for some people and also the ADB Installer is a large zip. Some people have poor internet connections.
Tulsadiver said:
Depends on what changes. Lots of times the SystemUIGoogle.apk and framework-res.apk are left unchanged in updates. But if it changes, I'll have to build and upload another new updated ADB Installer.
Edit: that is why I try to put dates on my uploads.
Click to expand...
Click to collapse
Got it. Thanks!
Sorry to double post, but have you @Tulsadiver heard anything about the Active Edge Magisk module support causing slow downs, freezes, and needing to hard reboot to get the phone responding again?
A post in Freak07's kernel thread theorizes that: https://forum.xda-developers.com/pi...aq-1-0-0-pixel-4-xl-aka-t3992213/post80749011
After removing the Active Edge support from your mods and moving to flar2's Button Remapper fixed the issue for me so far.
Any thoughts as to why the Active Edge modifications would cause issues for Pixel 4's?
ilal2ielli said:
Sorry to double post, but have you @Tulsadiver heard anything about the Active Edge Magisk module support causing slow downs, freezes, and needing to hard reboot to get the phone responding again?
A post in Freak07's kernel thread theorizes that: https://forum.xda-developers.com/pi...aq-1-0-0-pixel-4-xl-aka-t3992213/post80749011
After removing the Active Edge support from your mods and moving to flar2's Button Remapper fixed the issue for me so far.
Any thoughts as to why the Active Edge modifications would cause issues for Pixel 4's?
Click to expand...
Click to collapse
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Tulsadiver said:
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Click to expand...
Click to collapse
Thanks for the tip, I'll look for the telegram thread.
Tulsadiver said:
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Click to expand...
Click to collapse
@Tulsadiver you offer your mods for every available build?
10.0.0 (QD1A.190821.007, Oct 2019) Link 04b0499db27c14335dd01f5036225c1bb30132dfc786fbc1ee579af64e138351
10.0.0 (QD1A.190821.011, Oct 2019) Link f4d0cfd109d2ea5e4f3e807df5350edc26aede247ea2e0f5c2e338afd7a83c62
10.0.0 (QD1A.190821.011.C4, Oct 2019) Link dd397091f50f3196f39df636cf6cad53ef82fc5c066db3d39fbb7343f53d2045
etc?
Also all files are on the branch now. You can pull them from there: https://github.com/Magisk-Modules-Repo/active_edge_system_mod/tree/Files
j to the 4n said:
@Tulsadiver you offer your mods for every available build?
10.0.0 (QD1A.190821.007, Oct 2019) Link 04b0499db27c14335dd01f5036225c1bb30132dfc786fbc1ee579af64e138351
10.0.0 (QD1A.190821.011, Oct 2019) Link f4d0cfd109d2ea5e4f3e807df5350edc26aede247ea2e0f5c2e338afd7a83c62
10.0.0 (QD1A.190821.011.C4, Oct 2019) Link dd397091f50f3196f39df636cf6cad53ef82fc5c066db3d39fbb7343f53d2045
etc?
Also all files are on the branch now. You can pull them from there: https://github.com/Magisk-Modules-Repo/active_edge_system_mod/tree/Files
Click to expand...
Click to collapse
Cool! Yes sir, all capable Pixel builds. I swear I looked before but couldn't find them.
Uploaded new ADB Installers. Nov update.
Hi. Thanks for you good work
Q: If I use your installer to install some mods and want to edit or change the mods just i install ADB again without wipe anything?
And what if I want back to STOCK without wipe my data?
I want install your installer just for Swipe Navigation Old that coming with Pixel 3 or if you have time to make zip for me
Sorry for my English
Edit: Just i downloaded all files and i see everything is so easy [emoji16]
Sent from my Pixel 4 XL using Tapatalk
1- Flash SystemUI Bases Stock like
2- Flash Framework Bases - Stock like base
3- I choose what I want ( clock center - Navber swap - small LTE ) And from ADB launcher just remove weather Then I see the zip files ( mymagisk.zip - mymagisklauncher.zip ) in my phone in folder name: vrthemeADBmagisk I flashed vis Magisk Manager. Sure I reboot the phone but nothing changed?
Sent from my Pixel 4 XL using Tapatalk
DinarQ8 said:
1- Flash SystemUI Bases Stock like
2- Flash Framework Bases - Stock like base
3- I choose what I want ( clock center - Navber swap - small LTE ) And from ADB launcher just remove weather Then I see the zip files ( mymagisk.zip - mymagisklauncher.zip ) in my phone in folder name: vrthemeADBmagisk I flashed vis Magisk Manager. Sure I reboot the phone but nothing changed?
Click to expand...
Click to collapse
Did you run 30 - Complete Installation?
You should end up with the module zip in a folder name ozop. That's where mine end up.