Hi guys,
Yesterday arrived my two SONICable, I tested both cable whit Ampere.
The experience is not good, because the original OnePlus One cable charged faster.
I plugged in the cabels in the Anker 40W 5-Port Family-Sized Desktop USB Charger
SONICable charging 350 mA - 550 mA
Original 900 mA- 1820 mA
Have somebody other experience?
Hello guys,
as the title already says I'd like to know what is your favorite charger for the Le Max 2?
Do you guys all think that the OEM charger from LeEco is the best considering the charging speed or did you find even faster solutions?
Curious for your answers!
ANY qc 3.0 charger, i suppose
miskokupuje said:
Hello guys,
as the title already says I'd like to know what is your favorite charger for the Le Max 2?
Do you guys all think that the OEM charger from LeEco is the best considering the charging speed or did you find even faster solutions?
Curious for your answers!
Click to expand...
Click to collapse
Dear collegue. I am yet waiting for my X822. Maybe you could give me some information how long does it take you to fully charge your X820 from 0% and are you satisfied?
regards Olek
If the phone is off, I need about 1h30min. to full charge it when it is not in quick charge. First time I used QC and the phone heated up so that's why I know use the normall method.
For me it takes 1h20min with phone on and the capacity of the battery is correct measured with small USB tool. Fast charging is sometimes 8V and 2.5 A.
Wysłane z mojego Le X822 przy użyciu Tapatalka
got the X822 aka the grey version in transit, couldnt resist it at 222US, ewen thow im not in the market for new mobile, allready pretty satified with the p8max that i like a lot and that dont got any quickcharge tech at all afaik, other then just plain 1.9amp charge cycle., according to my YZXstudio1270 meter, but the 4300mah takes here around 2.15 hour to fill, but slowing down massive the last 5 to 10% like the norm.
that tempo is fine by me, but have also purchased the Vinsic P3 terminator with QC and type C in & out. intended for the X822. seemed reasonable at 28US and with product-specs that shouldnt be to fare for real-world according to reviews.
JUst wondering if you can trick QC3.0 trigger on other devices, got an relative old usb trigger for QC, but no QC phones or at least chargers to check if 9v and 12v can be optainable and be used for ones 12v coreM tablet, just like that and push of an button..
anyway certainly looking forward for my first entry into my first QC device Lemax2 X822 and not least typeC.. LeMax2 lookzs wicked in grey. .:good:
DaneLaw said:
got the X822 aka the grey version in transit, couldnt resist it at 222US, ewen thow im not in the market for new mobile, allready pretty satified with the p8max that i like a lot and that dont got any quickcharge tech at all afaik, other then just plain 1.9amp charge cycle., according to my YZXstudio1270 meter, but the 4300mah takes here around 2.15 hour to fill, but slowing down massive the last 5 to 10% like the norm.
that tempo is fine by me, but have also purchased the Vinsic P3 terminator with QC and type C in & out. intended for the X822. seemed reasonable at 28US and with product-specs that shouldnt be to fare for real-world according to reviews.
JUst wondering if you can trick QC3.0 trigger on other devices, got an relative old usb trigger for QC, but no QC phones or at least chargers to check if 9v and 12v can be optainable and be used for ones 12v coreM tablet, just like that and push of an button..
anyway certainly looking forward for my first entry into my first QC device Lemax2 X822 and not least typeC.. LeMax2 lookzs wicked in grey. .:good:
Click to expand...
Click to collapse
Where you found grey version for 222$?
Schumi_wk said:
If the phone is off, I need about 1h30min. to full charge it when it is not in quick charge. First time I used QC and the phone heated up so that's why I know use the normall method.
Click to expand...
Click to collapse
You are sure that the quick charge is actually off.?
when checking on mine X822 and turning the knob in setting < battery < quick charge' to not active.
it still display the same voltage and above +6v to around 9v dynamic.. (its the same when the phone is off)
its like the "quick charge off function" doesnt do anything at all. (am on stock X822 assume its 16s EUI'build)
if you got an usb-meter, try to measure if the voltage actually stays around usb 5v level when turning the quick charge off. (mine it doesnt on stock QC charger)
// digitalnasarma it was on AliE ref CB.
http://www.banggood.com/Qualcomm-Ce...ith-Power3S-Tech-p-1047935.html?rmmds=myorder - CHARGER
http://www.banggood.com/BlitzWolf-3...3ft1m-Data-Cable-p-1051395.html?rmmds=myorder - CABLE
DaneLaw said:
got the X822 aka the grey version in transit, couldnt resist it at 222US, ewen thow im not in the market for new mobile, allready pretty satified with the p8max that i like a lot and that dont got any quickcharge tech at all afaik, other then just plain 1.9amp charge cycle., according to my YZXstudio1270 meter, but the 4300mah takes here around 2.15 hour to fill, but slowing down massive the last 5 to 10% like the norm.
that tempo is fine by me, but have also purchased the Vinsic P3 terminator with QC and type C in & out. intended for the X822. seemed reasonable at 28US and with product-specs that shouldnt be to fare for real-world according to reviews.
JUst wondering if you can trick QC3.0 trigger on other devices, got an relative old usb trigger for QC, but no QC phones or at least chargers to check if 9v and 12v can be optainable and be used for ones 12v coreM tablet, just like that and push of an button..
anyway certainly looking forward for my first entry into my first QC device Lemax2 X822 and not least typeC.. LeMax2 lookzs wicked in grey. .:good:
Click to expand...
Click to collapse
Hello. Has anybody understand what this guy is writing. He always write muach but I cannot get any clue. Get off with your YZXStudio but just say how values you can achieve charging Le 2 Max with Vinsic Powerbank.
I also ordered the blitzwolf charger and cable.
Gesendet von meinem P9000 mit Tapatalk
We just need a qualcomm quick charge 3 compatible charger right?
Ugreen
is the adapter which was included in the package not quick charge 3.0 ?
Digiboy2010 said:
is the adapter which was included in the package not quick charge 3.0 ?
Click to expand...
Click to collapse
According to qualcomm, it is. My le max 2 shipped with charger EQ-24BUS.
https://www.qualcomm.com/documents/quick-charge-device-list
I'd like a charger for night-time charging. Does anyone know if there are ill effects by leaving your phone on quick charge for extended periods and doing so daily?
And would one risk damaging this phone by using any other 'regular' charger?
Any charger should be safe, just make sure the cable you use has Pullup resistor of 56kΩ, without that 56k chip all kinds of stuff can go wrong. usb A to usb C is a really bad setup and you'll need that chip for protection..
Thanks castuis. Best thing I learned today This (and this thread w/charger links) is good to have.
So Which charger and cable are the best for the price? Original or something else. And where to buy with shiping to EU?
https://plus.google.com/u/0/collection/s0Inv
This is by far the best way to buy cables and chargers. You will learn way more than you ever wanted about USB accessories.
I bought the multi pack of Orzly cables , they are the best, relatively cheap... Sturdy.... And won't burn up your phone/house.
https://plus.google.com/u/0/+BensonLeung/posts/5kADUwQKhY9
Supertacomonkeyexplosion said:
https://plus.google.com/u/0/collection/s0Inv
This is by far the best way to buy cables and chargers. You will learn way more than you ever wanted about USB accessories.
I bought the multi pack of Orzly cables , they are the best, relatively cheap... Sturdy.... And won't burn up your phone/house.
https://plus.google.com/u/0/+BensonLeung/posts/5kADUwQKhY9
Click to expand...
Click to collapse
Right, but those links mostly focus on USB C standard, not QuickCharge 3.0, which I believe technically violates USB C standards. I'd still suggest sticking to cables confirmed to have the correct pull-up resistor, and if you want to use USB power delivery rather than QuickCharge technology you can also stick to chargers and power banks from that list. I think QuickCharge 2.0/3.0 will still charge faster than USB power delivery though, in which you probably won't find them on that list.
In any case, I bought an 1 port Aukey QuickCharge 3.0 car charger and it seems to work well to charge up to 4 amps. I also bought an Aukey 10000 mAh QuickCharge 2.0 power bank, and it too seems to charge my phone at up to 4 amps. Both were bought from Amazon Canada. I use them either with the cable that came with my phone or good micro USB cables and Tronsmart Micro USB to USB C adapters (which have the appropriate pull-up resistor.)
good morning I am Italian, sorry for the translation .. even to you your charger emits a buzz while charging the battery? thank you
buongiorno ragazzi, anche voi notate che mentre ricarica si sente un ronzio dal caricatore? grazie mille
No, no sound when charging. Try different wall socket and if still happening change/discard the charger
chigos said:
good morning I am Italian, sorry for the translation .. even to you your charger emits a buzz while charging the battery? thank you
buongiorno ragazzi, anche voi notate che mentre ricarica si sente un ronzio dal caricatore? grazie mille
Click to expand...
Click to collapse
It most likely is a problem with your charger, it may either be that some generated current is at a wrong frequency and therefore at an audible frequency (happens with subways frequently) but most probably there is a faulty contact or relay. And in this case the best thing to do is to replace your charger. As it is probably still under warranty just contact support explaining your problem and they should replace it without trouble.
As the above said, you may try another wall socket.
Sent from my SM-N9760 using Tapatalk
There is no sound while charging
Fast charging was working fine but recently i am facing problem with fast charger....stock charge working fine,charging at 1000-1500 mah..but as soon as i use fast charger it is capped to 200-300mah..i tried everything change rom change charger nth working...please suggest me idea or any modules???
Sometimes, I have the same problem with my ZTE charger QC3. I should be around 2200 MAh with my RN5 , and It's only 360 or less. The only solution I've found it's to unplug the cable from the charger wich is still plug in the wall and to plug the cable again, and the quick charge start. Hope it will work for you. I'm with the stock Rom and not rooted.
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
HI Does anyone know of compatible chargers from reputable Companies. (UK plug style too)
It really does seem the that we have to use a USB 2 port that supports the extra pin, Even QC4.0+ chargers don't seem to get to MI Turbro. ( I test a linkOn charger) The only one that comes close is a charger from WJOY I randomly got from amazon but its not full 33w speed.
Oh Thanks for the thread on compatible cables...
Cheers
Jay
Short field report:
Anker PowerPort1 + QC3: 18 watts
Anker Nano II 45: 12 watts
So far I could only reach the 33 watts with the original charger...
the only other chager that comes close is the WJOY 65w chager, the usb a ports support 22.5 w which actually makes the poco think its using turbo charge, (EDIT) sorry to say the wjoy is no longer for sale
WJOY USB C Charger 65W 3 Port GaN Fast Charger PD Power Adapter Wall Chargers Plug+3.3ft Type C to C 5A Fast Charge Cable Compatible with Macbook Pro Air, iPad, iPhone X/XR/XS/11/11Pro Max, Galaxy S20: Amazon.co.uk: Electronics & Photo
Free delivery and returns on eligible orders. Buy WJOY USB C Charger 65W 3 Port GaN Fast Charger PD Power Adapter Wall Chargers Plug+3.3ft Type C to C 5A Fast Charge Cable Compatible with Macbook Pro Air, iPad, iPhone X/XR/XS/11/11Pro Max, Galaxy S20 at Amazon UK.
www.amazon.co.uk
Other than that still not found any other products that come close
baseus gan2 pro caps at around 28w