Develop Bugs

[Q] Defy with charger of iPad working-

Hi guys, yesterday I lost my original charger of the Defy, but as I had another charger, but the iPad, just connecting and using it the same. Defy the loaded very quickly, in about 1 hour. I noticed that the charger voltage iPad is 10w while the Defy is just 5w. Will I have any problem if you continue to use or not?

The charger of defy outputs 5.0V, 750mA,
it's not safe if your charging voltage is too high

Please answer full specification of the charger of Defy, because I lose my charger original.
Specification Charger iPad:
10W USB Adapter
Input: 100-240V ~0,45A(0,45A) 50-60Hz Output: 5.1V ###2.1A
Thanks

Big difference in charge speed between usb car chargers

I've tested two different car chargers, charging the Galaxy S4 at low battery in the car:
Energizer CC15141: 460 mA
Cheap dual usb ipad charger: 1200 mA
The dual usb for ipad allows up to 3.1 A top one or two at the same time.
The Energizer is up to 1 A
I guess the dual usb for ipad emulates wall charger, while the energizer does not, so the difference in charge speed.

Is Qualcomm quick charge 2.0 supported on the OnePlus 3?

Hi guys,
Just a simple question... Is Qualcomm Quick Charge 2.0 supported on the OnePlus 3?
I know there is Dash Charge (which is great), but I have a powerbank which supports Quick Charge 2.0...
I want to know if it wil charge faster than a regular 5V/1A USB port.
Thx!

Same problem here, would like to know this too. Can anyone with a OP3 try and let us know the different charging times with a normal charger, QC QC2.0 and Dash charger?
Sent from my LG-H955 using XDA-Developers mobile app

I don't have a Quick Charge charger, but with another charger the OP3 pulls around 1.5 A @ 5V = 7.5 W from it. This is the USB compliant amount i think.
I don't think that the OP3 supports any version of Quick Charge... But with a capable charger (non-Dash) it's pretty quick, too! In my car it gains fairly quickly, even though i'm navigation with google maps and i don't have a Dash-Charge car charger! With previous phones (LG G3 for example) the phone even LOST battery capacity while being plugged in!

Normal 5V 2.4A Charger: 1.5A @ 5V
5V 3A Quick Car Charger (for Nexus 5X/6p): 1.5A @ 5V
Quick Charge 2.0 Wall Charger: 1.5A @ 5V... you're beginning to get the idea...
Dash Charge Wall Charger: 3.5A @ 5V

And I tried a genuine 5V 1A iphone charger, 0.5A @ 5V

GeneralDisaray2 said:
Normal 5V 2.4A Charger: 1.5A @ 5V
5V 3A Quick Car Charger (for Nexus 5X/6p): 1.5A @ 5V
Quick Charge 2.0 Wall Charger: 1.5A @ 5V... you're beginning to get the idea...
Dash Charge Wall Charger: 3.5A @ 5V
Click to expand...
Click to collapse
This.

Just did the test by myself with the 'Ampere' app.
Battery was at 55%.
Dash Charge: 3330 mA
Qualcomm Quick Charge 2.0 Charger: 1420 mA
PC USB Port: 380 mA
My Nexus 6 charges at 2050 mA when connected to the Qualcomm Quick Charge 2.0 Charger.
Is it in some way possible to 'tweak' the OP3 so it can take 2000 mA when connected to a QC 2.0 charger?
I'm using ElementalX kernel btw.

OP3 is not quickcharge compatible so when connected to a quickcharge charger, the charger is in normal mode at 5V with a maximum of intensity that depend on the charger.
BUT the OP3 have only 3 charging step, one at 5V 0.5A, one at 5V 1.5A and then 5V 3.5A only if it's connected to a dash charger with a dash cable (or a oppo vooc with an adapter).
So for example, you connect to a 5V 1A charger, it will charge at 0.5V, like on a computer. But if it can draw 1.5A, it will do it but not above that unless a dash charger.
I tried many charger and it will not charge at another intensity.

Powerbank charge current

I have an anker 20000mah powerbank. Been charging my oneplus 3 with original cable via the poweriq port, but average charging current is about 1 to 1.2 Ampere normally. Anyone managed to get higher like 1.5A.?

Accessories Poco F3: Alternative chargers supporting the 33w Mi Turbo?

HI Does anyone know of compatible chargers from reputable Companies. (UK plug style too)
It really does seem the that we have to use a USB 2 port that supports the extra pin, Even QC4.0+ chargers don't seem to get to MI Turbro. ( I test a linkOn charger) The only one that comes close is a charger from WJOY I randomly got from amazon but its not full 33w speed.
Oh Thanks for the thread on compatible cables...
Cheers
Jay

Short field report:
Anker PowerPort1 + QC3: 18 watts
Anker Nano II 45: 12 watts
So far I could only reach the 33 watts with the original charger...

the only other chager that comes close is the WJOY 65w chager, the usb a ports support 22.5 w which actually makes the poco think its using turbo charge, (EDIT) sorry to say the wjoy is no longer for sale
WJOY USB C Charger 65W 3 Port GaN Fast Charger PD Power Adapter Wall Chargers Plug+3.3ft Type C to C 5A Fast Charge Cable Compatible with Macbook Pro Air, iPad, iPhone X/XR/XS/11/11Pro Max, Galaxy S20: Amazon.co.uk: Electronics & Photo
Free delivery and returns on eligible orders. Buy WJOY USB C Charger 65W 3 Port GaN Fast Charger PD Power Adapter Wall Chargers Plug+3.3ft Type C to C 5A Fast Charge Cable Compatible with Macbook Pro Air, iPad, iPhone X/XR/XS/11/11Pro Max, Galaxy S20 at Amazon UK.
www.amazon.co.uk
Other than that still not found any other products that come close

baseus gan2 pro caps at around 28w