Hello all.
This phone [GT-I9195, S4 Mini] died about 4 years ago and I've always thought it was hardware related. The other day I found the phone again and i was hoping to pull some data off. I plugged it into my pc and came across the "qhsusb_dload" which turned out to be quite common. I installed a driver and it turned into qualcomm HS-USB QDLOADER 9008. I came across a unbrick IMG on this forum and used it on a micro sd which to my surprise actually made the phone vibrate and turn on the display. The following text appeared on the display:
https://imgur.com/PgzjwkP
Now I am at a complete loss on what to do next. Does mmc_read failed indicate a hardware failure?
Some help would be greatly appreciated. If im leaving required information out please let me know and I'll try to provide.
This was the debrick img. that was used
I have the same problem. The fact is that the memory has so many bad sectors that it has switched to read-only mode. And to launch you need to write to sectors, but the phone cannot write data.
Related
dead/bricked LG G3 help in Manchester UK
Hi,
Just wondering if there is someone confident and experienced in modding and flashing of roms and so on in Manchester UK.
Last Thursday my G3 (D855 - european 32 gb) just died by it's own. I never messed around with the software on it, never had custom roms or anything on it... I was using it as usual, left it on the table and the next time I picked it up it was dead. it hat around 30-35% of battery when i left it on the table and after like 15 mins it was dead.
tried to charge it
tried booting into download mode (not working)
my laptop recognized it as qhsusb_bulk at first, than I installed some drivers and now it shows up as Qualcomm HS-USB QDLoader 9008...
I've tried a couple of things that i've found on the forums but either i'm doing something wrong or maybe i don''t have the right files... in any case i didn't manage to fix it.
so if there is someone near Manchester UK please contact me, i'm willing to pay for your " services "
If you power on the device the led blink's on red or something?!
display show no signal?! really strange...i dont know nothing with this problem but...if you search around your city sure you find mobile stores who made repairs and give you some feedback about what they could be!
the phone does not respond to anything. the led does not blink, the screen won't turn on at all, it won't go into download mode. the only sign that there is still some life in the phone is the fact that it shows up in the device manager as Qualcomm HS-USB QDLoader 9008...
from what i read on the forum it's soft bricked. i already tried almost all the methods (tot file, lg flash tool, board diag etc.) but they don't seem to work. for example :
*LG flash tool gives the following error : Download fail ! ... model information check fail.
*Boad diag 3.99c gives AP test fail
*LG smart boot diagnostics tool v.1.3.1 gives finds no errors and does nothing
i turned to the forum as I trust this community more than phone repair shops...
Failed at downgrading before I knew it I was bricked so went ahead and used the Qualcomm method got it to show up in device manager. As I was setting everything up the battery fell out, now my device won't vibrate or boot for that matter. Beforehand it only vibrated when connecting a usb to it, Any tips bring it back to life?
(I heard you can boot the os from an SD card but I don't have the .img file for my device.)
Device: LG Verizon VS985 was running MM
bump?
With the d850 there is a trick to sort out the motherboard and get it to boot. If your battery is removable it sound with on yours. Try searching for unbricking. There should a tutorial on here.
Hi,
My fiancé's s4 mini was found switched off about a week ago. Since then it will not charge or turn on - it always stays in black screen. Samsung support wants £125 to replace the motherboard and they say they cannot recover the data. I am more interested in recovering the contacts/any useful data from the phone rather than making it work again.
When connected to computer it will be detected as "relink hs-usb qdloader 9008". If an SD card is inserted with the various debrick images posted in the forums it will vibrate and boot, print REBOOTING after WRITE 139008 and it will keep rebooting and do the same all the time.
Phone was never rooted. It has received successfully all Samsung updates. QFIL detects the port but fails to flash the phone with 'Sahara fail' Samsung Kies / Odin do not detect the phone at all.
Any suggestions on how to proceed are greatly appreciated. I do suspect that perhaps I may need a more recent debrick.img but could be wrong. Or as Samsung says the motherboard is completely dead and unrecoverable..
Thanks!
Hi guys,
I am not sure what exactly happened. I was sitting around and listening to some music when my old Nexus 5X suddenly rebooted and stayed blank.
First guess - Battery. But that turned out to be quite wrong as I had charged it over night. Tried to get into fastboot mode or recovery mode; After the logo showing up and my beloved "This device isn't trusted" sign the screen went completely blank and that was the last sign of life. As it's got an USB port, I hooked the device up to a computer, found it to identify as "Qualcomm HS-USB QDLoader 9008".
Some research showed me that this is some kind of download mode, in terms of 'nothing works anymore' and you'd have to get your hands really dirty here to get at least somewhere.
So my educated guess would be bad memory or some corrupted filesystem and I'd have to reinitialize the phone to be able to fastboot or anything.
Tools already looked at:
LGUP - No joy; Device not found as this one requires something like a basic recovery mode which seems to be broken here
boarddiag - I was able to read from the memory using 'download' using a tot file I found somewhere online.
QPST - Found some prog_emmc_firehose_8992_lite_lge.mbn file, but I lack the patch and raw program files
Any ideas out there getting that bugger alive again?
Cheers
Rei
This is not a sign of download mode, your device hardbricked. As you have the firehose (I don't know if should work this) I found from another thread there the other files for QPST. I didn't tried that because this was released after I send my 5x to service (yes, for second time) due to hardbrick . https://drive.google.com/file/d/0B5EP5AzZNQxPcE52QWw2VloteUU/view
Hi
I have a bricked redmi 1s stuck in EDL mode
Nothings working and after applying test point method now it just detects as Qualcomm hsusb qdloader 9008 and while flashing through mi flash tool the 9008 changes to Qualcomm diagonastics 9006. Then the mmc storage driver installed but in device manager I discovered that the 9006 port keeps refreshing as well as the mmc storage at disk management also refreshing. And this causing an error " Specified device or network resources not available" .
So my question is
What is causing the problem and how to fix it.
An early help required . Have stuck at this problem from 2 or three weeks please you guys are awesome I know one of you can give me the solution.
Try this and see if it helps https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Nope it didn't worked.
Same problem ....
I think my motherboard damaged... I got an spare motherboard
Should I give a try?
parag2001 said:
Nope it didn't worked.
Same problem ....
I think my motherboard damaged... I got an spare motherboard
Should I give a try?
Click to expand...
Click to collapse
If you wish to give a try you can, I've seen someone having this type of issue and they were able to revive their device.
I'll search that thread for you but I don't remember exactly where I saw that.
I'll let you know as soon as i find that thread or any solution if there's any.
Please help me out I have no interest to play with the hardware parts please let me know if you find!!!
Thanks for your reply!
Hi.
At last trying several ways I got that my power button got short circuited so that the button was pressed all time and after popping the button out of the motherboard the phone is in stable condition but I just can't turn on the phone itself always a computer is required for fastboot commands to turn on the phone. And if you guys have any ideas how to fix that empty space or how to create a power button to use the button.
That's all but I am so happy that I could fix my 5 years no 6 years old phone.