Hello
I just bought a new car with an Android PX30 unit preinstalled.
Although there is an app which can help assign function on wheel keys (Key Study) this cannot allow me to change the apps launch sequence when I press the "Mode" button.
How can I set up my own sequence on this button?
Is there any way?
Please help.
Is it an MTCD unit
Related
Hi.
I just wonder how can i remap/reassign volume knob from "back" button to "home" button
Also i would like to reassign "play/pause" button to start or switch to powerAMP app.
Is this possible?
I downloaded mtc-keys but i cant find any insturctions how to use it.
I have Hui Fei Type Android unit. Probbably.
RK3066 800x600
MCU KGL4-V2.55
Im using HEADUNIT SERVICE to control PowerAmp
Thanks for your help
Hi fellas!
I have a peugeot where i fitted a custom px5 android radio. Since i have a faulty button on my steering wheel which triggers the "recent apps" function on android randomly i'm trying to disable that command via software. Is it possible? How can i do that?
It's pretty annoying and i'm already looking to change the button, but untill then i have to find a solution to this problem.
Hello, how can I configure my Steering Wheel Control. The App doesnt recognize any button.
I believe the SWC Line is connected to the Can Bus, Key 1 and 2 is empty at my HU.
The Buttons on Steeringwheel works, like prev next vol up down. I also tried to change the mapping in factory settings with the Front Button mapping settings, doestn work also.
It is a Opel Insignia 2014
Dear community,
I'm kind of lost since I get no support from Erisin about this (no response)
I have a BMW E46 from 2002 and the Erisin head unit.
MCU version is stock px5 MTCE (px5-userdebug 8.0.0. OPR5.170623.007 eng.hct.20180417.101726 test-keys)
I liked the idea of controlling the head unit volume by steering wheel.
Therefore I wired and installed the steering wheel buttons to my car.
The ACC works fine and in general I can control the head unit by the buttons.
Change Volume, Skip a song and so on...
Buuuut very often the head unit goes crazy or the control gets lost over the steering wheel buttons. (I am not able to drive over 30 minutes without having this error)
It seems like the head unit receives some ghost commands and volume goes up to max or I have random song skips. Sometimes it simply doesn't react on buttons.
Of couse this is not usable at all, therefore I disconnected the whole buttons.
For example you see a ghost volume up at 0:27
https://youtu.be/h5rCFSF8pew
Or here there is no reaction on volume up (please excuse my loud breathing)
https://youtu.be/e53De2HQJfY
Key study menu doesn't work at all:
https://youtu.be/Z0wzJsiScSI
Here is magic volume up (you will also see a handsome gangster guy)
https://youtu.be/ZPDQMeU4CNU
I have no clue how to debug or what I can do.
Any hints from the experts?
messiah said:
Dear community,
I'm kind of lost since I get no support from Erisin about this (no response)
I have a BMW E46 from 2002 and the Erisin head unit.
MCU version is stock px5 MTCE (px5-userdebug 8.0.0. OPR5.170623.007 eng.hct.20180417.101726 test-keys)
I liked the idea of controlling the head unit volume by steering wheel.
Therefore I wired and installed the steering wheel buttons to my car.
The ACC works fine and in general I can control the head unit by the buttons.
Change Volume, Skip a song and so on...
Buuuut very often the head unit goes crazy or the control gets lost over the steering wheel buttons. (I am not able to drive over 30 minutes without having this error)
It seems like the head unit receives some ghost commands and volume goes up to max or I have random song skips. Sometimes it simply doesn't react on buttons.
Of couse this is not usable at all, therefore I disconnected the whole buttons.
For example you see a ghost volume up at 0:27
https://youtu.be/h5rCFSF8pew
Or here there is no reaction on volume up (please excuse my loud breathing)
https://youtu.be/e53De2HQJfY
Key study menu doesn't work at all:
https://youtu.be/Z0wzJsiScSI
Here is magic volume up (you will also see a handsome gangster guy)
https://youtu.be/ZPDQMeU4CNU
I have no clue how to debug or what I can do.
Any hints from the experts?
Click to expand...
Click to collapse
You should go Settings/Steering wheel keys to program the SWC, but not go to panel keys study.
I think the key menu doesnt matter. Actually the Buttons work as expected. But it gets out of control very often (random skips, volume up and so on). I also saw a key menu where I See the logs of key press. The head unit seem to actually receive the ghost key strokes repeatedly.
Have you tried entering at the factory menu and changing the car model at canbus menu?
You have a full menu for the keys where to change configurations.
Enviado desde mi iPhone utilizando Tapatalk
Had same problems - like not working buttons, i press up but it volumes up... After latest MCU update seems to be fixed. But also what i did in Steering wheel learning menu dublicated inputs for same buttons. i have on mine and it works without fall since.
Hello guys:
I am not able to setup the control wheel steering buttons for Phone functions ( pick up a call or end a call) on a DASAITA PX6 10.
On settings I selected CAN BUS
I setup the following commands:
- Increase/decrease Volume---OK
- Mode ( to swap between radio, AV, iPod...)---OK
- Next and previous song---OK
but when I setup the phone setting it is configured but on CarPlay doesn't work, I am no able to pick up the phone.
Any help???
Best regards
What does reseller suggest when contacted for support
My understanding is that there are two ways to connect these units to can bus.
One is with the external vehicle specific can bus boxes, which are not really programmable.
The second is with the key1/2 wires which is internal and are programmable through the key study. I have never used this method, so I know nothing about it... but you could try it.
If all else fails, you can try a PAC can bus adapter.
PAC – Connecting cars and technology. Your total installation solution.
pac-audio.com
Thanks for your replies.
I can program the keys. But what I am not able to program the phone function to work. I assign the functions to the buttons but it doesn’t do anything.
On the other hand the other buttons programmed (increase/decrease volume) works properly
CyrusMzRG said:
Thanks for your replies.
I can program the keys. But what I am not able to program the phone function to work. I assign the functions to the buttons but it doesn’t do anything.
On the other hand the other buttons programmed (increase/decrease volume) works properly
Click to expand...
Click to collapse
Did you setup the keys for just the Dasaita in the unit's settings, or have you also setup the keys in the ZLink app?
I had only done the former and had this problem when I first was trying CarPlay with the ZLink app. What you will need to do is open the ZLink App, without connecting your iPhone to the unit (put it in airplane mode, or leave it in the house far away from your car), then go to Settings within the app. There you will see options to assign the steering wheel keys to the various functions you want for your phone. Once it is all set, you will be able to control CarPlay exactly how you want.
Hope this helps!
SeaMonkey80 said:
Did you setup the keys for just the Dasaita in the unit's settings, or have you also setup the keys in the ZLink app?
I had only done the former and had this problem when I first was trying CarPlay with the ZLink app. What you will need to do is open the ZLink App, without connecting your iPhone to the unit (put it in airplane mode, or leave it in the house far away from your car), then go to Settings within the app. There you will see options to assign the steering wheel keys to the various functions you want for your phone. Once it is all set, you will be able to control CarPlay exactly how you want.
Hope this helps!
Click to expand...
Click to collapse
THANK YOU very much for your help. You solved the problem.
I entered that menu several times and I saw that mapping section but I forgot it completely
now everything is working fine
thanks a lot