Develop Bugs

Question and newbie asking for help

I lost my original note 3 last month and got me a korean clone for a samsung tab 3 [ says S-7200] and model is m707EBC i tried all the versions of frama root and tried odin tried that malaysian thing apk but i dont see this one rooted. need help since i usually root my phones and re partition it to make it faster help please xD

dodgebratinella said:
I lost my original note 3 last month and got me a korean clone for a samsung tab 3 [ says S-7200] and model is m707EBC i tried all the versions of frama root and tried odin tried that malaysian thing apk but i dont see this one rooted. need help since i usually root my phones and re partition it to make it faster help please xD
Click to expand...
Click to collapse
If you have a clone, you cant use odin.
Maybe you can look for a mtk method
Enviado desde mi LG-E612 mediante Tapatalk

Root can be easily achieved without a computer. You can use a mobile root app such as
KeyRoot Master. First install the app then click mulai root, a message will pop up then click root it will take about 40 seconds
And you will have root.
APK mediafire(dot) com/?bezmegz7bvhogo6 (please replace the use properly I cannot post because of security policies irs)
Code:
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *//[CODE]

[TOOL] Robin Toolkit (v1.2) - Root, TWRP, rescue device...

"I'm not responsible for any damage suffered by your device. You decide if you want to use my tool or not. Also you won't be able to update via OTA."
Ok guys, so as I promised, as soon as I received my Robin I started to work on this to finish it, and after some days of working and testing, here you have a toolkit for the cute Robin:
- Unlock/Lock the Robin (You should unlock your Robin the first time you use this tool. If not, as most of the tools below need the bootloader to be unlocked, you will lose your data when running any of them for the first time. In that case, creating a backup would be really unuseful. Unlock once, unlock forever)
- Backup/Restore
- Root
- Install TWRP
- Wipe Cache/Data (with and without TWRP installed)
- Install factory images (System, Boot and/or recovery, up to you - Not the last version, I have to update it)
- Install non-forced-encryption patched boot by @d3xt3r (Thanks bud!) [Possibly adding the @deadman96385 version too in a near future!]
Root, Install TWRP and Backup/Restore work 100% sure. Other like install factory images or the non-encryption mod I haven't tested them (I have zero time, literally), but they should work (95% sure).
Thanks also to @deadman96385, @d3xt3r, and @Baymax, who helped me testing and giving me their knowdledge!
Any suggestions and bug reporting are welcome!
Changelog
v1.2
No more using C:\ to store all the necessary files
Now using temp files, they're deleted when the Toolkit window is closed
No need to install adb anymore, it's installed the first time you run the .exe file
Update check added. You will get a message to download the new .exe everytime an update is available
Backup fixed (wasn't working)
DEAD

Great job mate! ^^

Nice job buddy!

good job david ? ? ?

Sharing violation
Getting sharing violation when I go to install adb. Any thoghts? Windows 10
Steve

flsocialist said:
Getting sharing violation when I go to install adb. Any thoghts? Windows 10
Steve
Click to expand...
Click to collapse
Can you give any more specific info (or screenshots)? Did you already have adb installed or not?
D

Good job David!! (I'm Darragh lol )

I can't seem to get this to detect that I have ADB installed...

daavm said:
"I'm not responsible for any damage suffered by your device. You decide if you want to use my tool or not. Also you won't be able to update via OTA."
Ok guys, so as I promised, as soon as I received my Robin I started to work on this to finish it, and after some days of working and testing, here you have a toolkit for the cute Robin:
- Unlock/Lock the Robin (You should unlock your Robin the first time you use this tool. If not, as most of the tools below need the bootloader to be unlocked, you will lose your data when running any of them for the first time. In that case, creating a backup would be really unuseful. Unlock once, unlock forever)
- Backup/Restore
- Root
- Install TWRP
- Wipe Cache/Data (with and without TWRP installed)
- Install factory images (System, Boot and/or recovery, up to you - Not the last version, I have to update it)
- Install non-forced-encryption patched boot by @d3xt3r (Thanks bud!) [Possibly adding the @deadman96385 version too in a near future!]
Root, Install TWRP and Backup/Restore work 100% sure. Other like install factory images or the non-encryption mod I haven't tested them (I have zero time, literally), but they should work (95% sure).
Thanks also to @deadman96385, @d3xt3r, and @Baymax, who helped me testing and giving me their knowdledge!
Any suggestions and bug reporting are welcome!
DOWNLOAD
Click to expand...
Click to collapse
Only if u had released this 3months earlier i wouldnt hav hard bricked my phone broo......... I've bcom a fan of urs bro....

Mountainmohawk said:
I can't seem to get this to detect that I have ADB installed...
Click to expand...
Click to collapse
@Mountainmohawk can you give me any more specific details? Thanks
D

Sunderesh said:
Only if u had released this 3months earlier i wouldnt hav hard bricked my phone broo......... I've bcom a fan of urs bro....
Click to expand...
Click to collapse
@Sunderesh at least nextbit's warranty covers accidental bricks!
D

Updated to v1.2!!
D

I got a trojan warning from this rootkit. Any thoughts? Or am I the only one?

joeminati said:
I got a trojan warning from this rootkit. Any thoughts? Or am I the only one?
Click to expand...
Click to collapse
@joeminati yes, it's already been reported. Some Antivirus software take any non-signed .exe package as a virus (trojan in this case). Better answer about this, in stackoverflow: http://stackoverflow.com/questions/...015-community-trojan-heur-qvm03-0-malware-gen
PD: Obviously my .exe is not signed
D

Attempted
I attempted to use this tool and it wouldn't acknowledge that my Robin was connected to it. I've installed adb and unlocked bootloader and twrp and custom rom without the tool but I wanted to try the tool and it didn't work.

dispatcher2412 said:
I attempted to use this tool and it wouldn't acknowledge that my Robin was connected to it. I've installed adb and unlocked bootloader and twrp and custom rom without the tool but I wanted to try the tool and it didn't work.
Click to expand...
Click to collapse
@dispatcher2412 yeah, some users are having the same problem. Thanks, will try to solve it!
D

daavm said:
@Sunderesh at least nextbit's warranty covers accidental bricks!
D
Click to expand...
Click to collapse
Really therz nothing like that in my country bro......

Sunderesh said:
Really therz nothing like that in my country bro......
Click to expand...
Click to collapse
@HyderAbad where did you buy your Robin? It usually has 1 year warranty from Nextbit, which covers accidental bricks. Contact Nextbit support and they will help you!
D

Does this toolkit also unroots the device to factory??

utsav_94 said:
Does this toolkit also unroots the device to factory??
Click to expand...
Click to collapse
I believe you can flash factory images. If not, you can check out our forums for more information. I did provide an unbrick tool that helps to do this.

[ARGENTINIAN][BOOTLOADER UNLOCKED] LG Spirit

Hi guys! This bootloader unlock version is only for ARGENTINIAN models.
You can donate me (PAYPAL LINK COMING SOON) and @cerg2010cerg2010 through paypal.
@cerg2010cerg2010 PAYPAL EMAIL: [email protected] OR QIWI: +79157840294
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
No more secure boot error!
I thank my friend @cerg2010cerg2010 for helping me out in patching the aboot.
Supported Model:
Code:
H440AR
-> Steps:
(1) Downgrade to v10a or v10d version of Android.
(2) Root your device.
(3) Download this patched aboot file. Click Here for v10a. Click Here for v10d.
(4) Connect your phone to the computer. In command prompt, type "adb shell".
(5) Transfer the aboot file into /sdcard/ folder.
(6) Type "su" to enter the root shell. Then type "dd if=/sdcard/<file_name_you_downloaded_in_3rd step> of=/dev/block/<your aboot partition>".
(7) Restart your phone by typing "reboot".
You have unlocked your bootloader!
Refer Notes for more information.
-> Notes:
1) The aboot_5120_patched.bin or aboot_10d_patched.bin is the patched version of aboot partition of your device. Secure boot validation has been patched such that secure boot is always valid, so you can flash your own TWRP and Custom ROM.
2) Don't upgrade to any updated version of Android if you get any through OTA update. It might brick your device.

I'll give it a try soon, hopefully if the guys here are correct 4g/lte should work now. Thanks a lot!
Edit: apparently this fixed the issue regarding LTE using argentinian bands, I'll keep testing it but so far it holds even after a call and a low signal area it just switches from lte to 3g and so on (which wasn't working with the other aboot)

Korelev said:
I'll give it a try soon, hopefully if the guys here are correct 4g/lte should work now. Thanks a lot!
Edit: apparently this fixed the issue regarding LTE using argentinian bands, I'll keep testing it but so far it holds even after a call and a low signal area it just switches from lte to 3g and so on (which wasn't working with the other aboot)
Click to expand...
Click to collapse
Thanks for confirming!

You did it!!!! Many Many Thanks!!!! T.T

69PerTTu69 said:
You did it!!!! Many Many Thanks!!!! T.T
Click to expand...
Click to collapse
Hey, I'm trying to download the Argentinean aboot, but the link is dead. Can anyone help me with it ?

mayankjet said:
Hey, I'm trying to download the Argentinean aboot, but the link is dead. Can anyone help me with it ?
Click to expand...
Click to collapse
They aren't broken

69PerTTu69 said:
They aren't broken
Click to expand...
Click to collapse
My bad.

links are not working for me
edit: apparently they are now

Quick question: by unlocking the bootloader I should be able to later flash a custom recovery and then root the phone, right? As the argentinian version seems to be unrootable via kingroot (which is what the general thread recommends). Do I got this right, or is there a simple version to root it? Thanks.

Kon22 said:
Quick question: by unlocking the bootloader I should be able to later flash a custom recovery and then root the phone, right? As the argentinian version seems to be unrootable via kingroot (which is what the general thread recommends). Do I got this right, or is there a simple version to root it? Thanks.
Click to expand...
Click to collapse
First you need to be on Lollipop.
Root it by using Kingroot.
Unlock the bootloader.
Flash TWRP 3.1.1.0
Flash MM v20b zip proposed by Korelev.
Flash Supersu.
Now you have a rooted MM.

walterfuster said:
First you need to be on Lollipop.
Root it by using Kingroot.
Unlock the bootloader.
Flash TWRP 3.1.1.0
Flash MM v20b zip proposed by Korelev.
Flash Supersu.
Now you have a rooted MM.
Click to expand...
Click to collapse
I tried rooting it using Kingroot with no success, both with the APK and the app on PC. Running stock lollipop, obviously. I assumed the argentinian version (H440AR) couldn't be rooted via kingroot, which is why I'm wondering if the only way is to simply unlock bootloader, flash TWRP and then flash SuperSU.

Kon22 said:
I tried rooting it using Kingroot with no success, both with the APK and the app on PC. Running stock lollipop, obviously. I assumed the argentinian version (H440AR) couldn't be rooted via kingroot, which is why I'm wondering if the only way is to simply unlock bootloader, flash TWRP and then flash SuperSU.
Click to expand...
Click to collapse
The thing is, you can't unlock the bootloader without first having su permissions.
AR device version shouldn't be a problem.
Mine is Argentinian too and I easily rooted it.
Try with an older version of Kingroot. You can easily find it around apk's sites.
If no luck, try flashing an H440N kdz (I'm on POL v10i) with LG Flash Tool 2014, and see what happens.
You can do a dirty flash if you don't want to lose your data.
P.S.: I even switched from Kingroot to SuperSU. I highly recommend this. Kingroot converts your phone in a turtle.

walterfuster said:
The thing is, you can't unlock the bootloader without first having su permissions.
AR device version shouldn't be a problem.
Mine is Argentinian too and I easily rooted it.
Try with an older version of Kingroot. You can easily find it around apk's sites.
If no luck, try flashing an H440N kdz (I'm on POL v10i) with LG Flash Tool 2014, and see what happens.
You can do a dirty flash if you don't want to lose your data.
P.S.: I even switched from Kingroot to SuperSU. I highly recommend this, Kingroot convert your phone in a turtle.
Click to expand...
Click to collapse
Huh, that's odd then, that Kingroot couldn't do it. I'll keep looking into it, then. Thanks for the help, will report back.

walterfuster said:
The thing is, you can't unlock the bootloader without first having su permissions.
AR device version shouldn't be a problem.
Mine is Argentinian too and I easily rooted it.
Try with an older version of Kingroot. You can easily find it around apk's sites.
If no luck, try flashing an H440N kdz (I'm on POL v10i) with LG Flash Tool 2014, and see what happens.
You can do a dirty flash if you don't want to lose your data.
P.S.: I even switched from Kingroot to SuperSU. I highly recommend this. Kingroot converts your phone in a turtle.
Click to expand...
Click to collapse
Hello there. I managed to use kingroot to root one of the two spirits I have (the other one still doesn't budge, for whatever reason) and indeed it turns the phone into a turtle. I was wondering, is it possible to flash superSU without flashing marshamallow before? Not that I'd mind flashing it, but without the ability to use an SD card as internal storage the main advantage is gone, and I wouldn't wanna have MM if it hurts battery time or fluidity of the phone.

Kon22 said:
Hello there. I managed to use kingroot to root one of the two spirits I have (the other one still doesn't budge, for whatever reason) and indeed it turns the phone into a turtle. I was wondering, is it possible to flash superSU without flashing marshamallow before? Not that I'd mind flashing it, but without the ability to use an SD card as internal storage the main advantage is gone, and I wouldn't wanna have MM if it hurts battery time or fluidity of the phone.
Click to expand...
Click to collapse
If I don't get wrong, you want to stay on a SuperSU rooted LP, right?
Well, you can get that, not by flashing, but by replacing Kingroot with SuperSU.
you'll have to do the following:
https://forum.xda-developers.com/a3...place-kingroot-kinguser-t3308989/post65167979
P.S.: If you decide to stay on LP for definitely, I highly recommend you apply the Tomo's tweaks.
They get the most of Spirit running LP:
https://forum.xda-developers.com/lg...formance-battery-saving-t3217133/post63121297

So if I get this right I should be able to use custom roms after doing this procedure? I've been asking about in the LOS14.1 rom thread but people talking about a bluescreen when they ran out of signal in the argentinian model scared me off. I cant get a new phone atm in case I brick this one. Nobody could give me a definitive answer about it so far.

Niku200 said:
So if I get this right I should be able to use custom roms after doing this procedure? I've been asking about in the LOS14.1 rom thread but people talking about a bluescreen when they ran out of signal in the argentinian model scared me off. I cant get a new phone atm in case I brick this one. Nobody could give me a definitive answer about it so far.
Click to expand...
Click to collapse
Yes, following this procedure can get your bootloader unlocked. Also LOS does have that blue scrren error, only if you don't have network service. However it's not that big of a issue. You can prevent blue screen by using airplane mode.

mayankjet said:
Yes, following this procedure can get your bootloader unlocked. Also LOS does have that blue scrren error, only if you don't have network service. However it's not that big of a issue. You can prevent blue screen by using airplane mode.
Click to expand...
Click to collapse
I knew about that workaround but signal is pretty unstable where I live. Specially when I travel and I like to use spotify while doing so. I'd like to avoid it as much as I can. I guess I'll give it a go and if it fails I can go back flashing a stock firmware.

Niku200 said:
I knew about that workaround but signal is pretty unstable where I live. Specially when I travel and I like to use spotify while doing so. I'd like to avoid it as much as I can. I guess I'll give it a go and if it fails I can go back flashing a stock firmware.
Click to expand...
Click to collapse
Okay.

So, I've been trying to download this several times but I'm always hit with a trafic limit from the person who shared it. Would somebody share me the files somehow?

[GUIDE]ENABLE Camera2 API without root on Vince.

Here, I shall guide you how to easily enable Android Camera2 API needed for Google Camera (Gcam) app and any other camera apps with advanced manual settings.
This trick requires custom recovery either TWRP or*RWRP*only for booting (without being installed).
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
REQUIREMENTS:
The Device, of course!
Unlocked bootloader.
ADB Driver Installer.
Red Wolf Recovery (RWRP) for Vince.
A Windows-based computer.
A*USB*data*cable.
Step 1 – Install the Minimal Fastboot and ADB Driver on your computer.
Step 2 – Extract the*RWRP*package. You should get a file called “RedWolf-Vince-3.x.x.img“.
Step 3 – Now copy that file to the adb folder.
Step 4 – Next, rename the file from “RedWolf-Vince-3.x.x” to “rwrp“. Note: Commonly Windows does not display the file extension (.img).
Step 5 – Still at the adb folder, launch the command prompt window from that location. Simply hold down the*Shift button*on the keyboard and right-click on any blank area in Windows Explorer (inside the adb folder). Then choose Open PowerShell/Command Prompt Window option
Step 6 – Enable USB Debugging option on your phone.
Step 7 – Now issue the following command correspondingly (type the command and hit Enter):
Code:
adb devices
adb reboot bootloader
fastboot devices
fastboot boot rwrp.img
adb shell
setprop persist.camera.HAL3.enabled 1
setprop persist.camera.eis.enable 1
exit
adb reboot bootloader
fastboot reboot
Congratulations! You have enabled Camera2 API without losing the ability to receive MIUI OTA Update since you do not flash any custom recovery.
If you got help from this guide and/or liked it hit that Thanks button below. It makes me happy

Thank you.
It's working on the Redmi Note 5 Global (WHYRED) aswell.
You have to use this RWRP version:
https://forum.xda-developers.com/redmi-note-5-pro/development/recovery-red-wolf-recovery-project-t3766997

camerlengo said:
Thank you.
It's working on the Redmi Note 5 Global (WHYRED) aswell.
You have to use this RWRP version:
https://forum.xda-developers.com/re...t/recovery-red-wolf-recovery-project-t3766997
Click to expand...
Click to collapse
Well, that's nice to hear that it works on whyred as well!
Can you confirm that on which ROM or miui version it is working?

Will it work on vince latest miui 10 global beta?? Pls confirm and if it does enable camera 2 api I won't lost it in future updates right? Or will it get disabled if I install future updates?and it won't brick my device? Right?

Cannot enable camera2api by using this method on latest MIUI 10 8.7.26. However this method is works on MIUI 9

buddhatrip said:
Cannot enable camera2api by using this method on latest MIUI 10 8.7.26. However this method is works on MIUI 9
Click to expand...
Click to collapse
Oh ohkay

buddhatrip said:
Cannot enable camera2api by using this method on latest MIUI 10 8.7.26. However this method is works on MIUI 9
Click to expand...
Click to collapse
Can you confirm that it doesn't work on miui 10 8.7.26?

kartik676 said:
Will it work on vince latest miui 10 global beta?? Pls confirm and if it does enable camera 2 api I won't lost it in future updates right? Or will it get disabled if I install future updates?and it won't brick my device? Right?
Click to expand...
Click to collapse
You did get the answer.
Yes it does work, but unfortunately not on latest miui 10 beta.
There's no harm in enabling it.
If you get stuck you can always use mi flash to revert back

thanks you, its work
but will i lose this patch when i update to miui 10 ?

androidland said:
thanks you, its work
but will i lose this patch when i update to miui 10 ?
Click to expand...
Click to collapse
Yes, it cannot persist over ota, so you will lose it if you update to miui 10.
But wait, how will you do that?- Miflash tool or normally update via OTA?

AndroBuddy007 said:
Yes, it cannot persist over ota, so you will lose it if you update to miui 10.
But wait, how will you do that?- Miflash tool or normally update via OTA?
Click to expand...
Click to collapse
normaly update via OTA
i wait until miui 10 global final stable
so when i update to miui 10 later via OTA, i will lose this patch ?
and i can not do this patch any more in miui 10 ?

androidland said:
normaly update via OTA
i wait until miui 10 global final stable
so when i update to miui 10 later via OTA, i will lose this patch ?
and i can not do this patch any more in miui 10 ?
Click to expand...
Click to collapse
Yes you will lose this patch on miui 10.
You should be able to use it in miui 10 easily.
And since it will be a global STABLE version, it will work like a charm just as it does in miui 9. Still let's see what Xiaomi does.
Till then enjoy!

Is there any way to unlock Bootloader without loose data? Thanks.

stavrakas2007 said:
Is there any way to unlock Bootloader without loose data? Thanks.
Click to expand...
Click to collapse
I unlocked my BL without losing any data. BUT.... that was 3-4 months ago when there was no such restriction. Now if you unlock your phone, you will lose data.
But you can backup your data in settings<additional settings<backup and reset. Copy those files to your PC. Restore it when you unlock your phone.
Remember that this thread is not for posting such questions, for your question you can google it or search xda. Don't be lazy.

AndroBuddy007 said:
I unlocked my BL without losing any data. BUT.... that was 3-4 months ago when there was no such restriction. Now if you unlock your phone, you will lose data.
But you can backup your data in settings<additional settings<backup and reset. Copy those files to your PC. Restore it when you unlock your phone.
Remember that this thread is not for posting such questions, for your question you can google it or search xda. Don't be lazy.
Click to expand...
Click to collapse
Thanks.

Any issue with anti rollback or bootloop issue?
camerlengo said:
Thank you.
It's working on the Redmi Note 5 Global (WHYRED) aswell.
You have to use this RWRP version:
https://forum.xda-developers.com/redmi-note-5-pro/development/recovery-red-wolf-recovery-project-t3766997
Click to expand...
Click to collapse
Do i need to Flash lazy flasher, after completing this process.
I am on 8.8.2 Global Beta on my redmi note 5 pro.
Thanks

mp4154 said:
Do i need to Flash lazy flasher, after completing this process.
I am on 8.8.2 Global Beta on my redmi note 5 pro.
Thanks
Click to expand...
Click to collapse
Ugh well.... This thread and forum is for REDMI note 5 Vince not pro (whyred).
But I must say that lazy flasher is not needed coz here we are using setprop commands and hence not flashing any mod. So lazy flasher just doesn't come to play here!
Try it out and reply me if you succeeded in enabling the API on your whyred. Remember to just keep Lazy flasher in handy.

Whenever I enter twrp, it always asks for decrypt password. Is there any other way to boot into twrp without formatting data?

pyrohalo90 said:
Whenever I enter twrp, it always asks for decrypt password. Is there any other way to boot into twrp without formatting data?
Click to expand...
Click to collapse
No.
That's why I mentioned RWRP as alternative.

This doesn't work on miui 10 any help on how to do it?

Question Is rooting this worth it or is it still giving people trouble?

haven't been able to find many posts on how to actually root the A32 (mine's SM-A325M/DS) but I've been seeing some about people saying that some time after rooting their A32s their IMEI disappears.
Can anyone give me an update on this and a tutorial on how to root it in case it's now possible to do it without issues?
Thanks in advance for the help

ixalcor said:
haven't been able to find many posts on how to actually root the A32 (mine's SM-A325M/DS) but I've been seeing some about people saying that some time after rooting their A32s their IMEI disappears.
Can anyone give me an update on this and a tutorial on how to root it in case it's now possible to do it without issues?
Thanks in advance for the help
Click to expand...
Click to collapse
This was a problem with older versions of magisk and is fixed. The imei does not dissapear anymore. So theres no problem anymore. If your still unsure you can try kernelsu an alternative to magisk. I have a thread for it in a32's thread.

Captain_cookie_200 said:
This was a problem with older versions of magisk and is fixed. The imei does not dissapear anymore. So theres no problem anymore. If your still unsure you can try kernelsu an alternative to magisk. I have a thread for it in a32's thread.
Click to expand...
Click to collapse
thanks for the update dude

Captain_cookie_200 said:
This was a problem with older versions of magisk and is fixed. The imei does not dissapear anymore. So theres no problem anymore. If your still unsure you can try kernelsu an alternative to magisk. I have a thread for it in a32's thread.
Click to expand...
Click to collapse
My IMEI just disappeared
goddammit

ixalcor said:
My IMEI just disappeared
goddammit
Click to expand...
Click to collapse
tf.. what version of magisk did you use
i apologize.. i daily drove magisk 25.2 for a whole year without issues. and many users reported it doesnt happen anymore. idk what happened here but i am extremely sorry. i am glad you fixed it using the other thread.