Related
Hi all, can someone help me pls?
When i install any not stock based rom (CM11, Mokee, Carbon) my e975 doesn't goin deepsleep.
Now i'm on Artmod 5.3 and deepsleep works.
I've tried to flash only rom and gapps, installed only better battery stats and the phone doesn't go on deep sleep to.
I've the suspendbackoff wakelock on kernel wakelock and com.google.android.gms on Allarms.
I don't understand where the problem is.
Tx for any help.
I've seen that i have a RILJ wakelock, it's a baseband related problem i think, what can i do for solve that?
https://docs.google.com/file/d/0B-2RJW9ppzwjdkFNOHA0OXZJUEU/edit?usp=docslist_api
paolinhos said:
https://docs.google.com/file/d/0B-2RJW9ppzwjdkFNOHA0OXZJUEU/edit?usp=docslist_api
Click to expand...
Click to collapse
It clearly shows that your phone is in deep sleep state 3 minutes out of 10 (that's your stats period). Is this taken on ArtMod ROM? RILJ wakelock is only 1 minute (12.7% of total stats period), so is that really a problem? Are you trying to improve your deep sleep on ArtMod, or solve the problem with non-stock custom ROMs?
kt-Froggy said:
It clearly shows that your phone is in deep sleep state 3 minutes out of 10 (that's your stats period). Is this taken on ArtMod ROM? RILJ wakelock is only 1 minute (12.7% of total stats period), so is that really a problem? Are you trying to improve your deep sleep on ArtMod, or solve the problem with non-stock custom ROMs?
Click to expand...
Click to collapse
no i'm on mokee caming from artmod, the 3 minutes that phone is in deepsleep are when i've switch on it in airplane mode, then i switch off airplane mode and it never goes in deepsleep mode.
if i switch on the phone withouth airplane mode it never goes on deep sleep.
This only succed on non stock roms.
Basically if i'm in non stock based rom my phone never go into deepsleep mode.
I've tried to flash a clean rom CM11 and only install better battery stats and i see however the phone never go in deep sleep, if i switch on the phone normal way and then i put it in aereo mode it doesn't go in deep sleep mode to.
Only way to mke it goes on deep sleep is to restart it on airplane mode.
Sorry i've bad english, i hope you understand me.
Ahh, OK. It's pretty clear now, thanks!
Sorry, I don't have much experience with non-stock ROMs, so I am afraid I wouldn't be able to help you much with this... Hopefully, someone can give you some ideas. One thing I can suggest is to look at some apps to force deep sleep mode. For example, DS Battery Saver. Might not be the best approach (better to resolve the underlying problem), but it did help me when I was trying to improve my battery life...
kt-Froggy said:
Ahh, OK. It's pretty clear now, thanks!
Sorry, I don't have much experience with non-stock ROMs, so I am afraid I wouldn't be able to help you much with this... Hopefully, someone can give you some ideas. One thing I can suggest is to look at some apps to force deep sleep mode. For example, DS Battery Saver. Might not be the best approach (better to resolve the underlying problem), but it did help me when I was trying to improve my battery life...
Click to expand...
Click to collapse
Already tried ds battery saver and du battery saver, no one help me...
i'm really afraid about this problem because before installing Artmod i've no problem with cyano based rom...
I don't think it's problem related to artmode however.
Pls can someone help me???
EDIT: I've installed the new Carbon Rom with jolla kernel and it seems to go on deep sleep..
I attach a quick better battery stats report if someone can help.
I've tried to install a 10c baseband before flash Mokee rom, not usefull..
Now i try to flash another kernel.
I don't understand why in based stock rom the phone goes in deepsleep and with CM11 based no.
I see on gee or geeb based cm11 rom deepsleep works
guys does someone or anyone expirience Battery Drain when sensors are not working and the temperature will sky high, i dont know which rom has that problem, encountered it in MIUI v5 stock rom, even tried CM11 all updates, then flash custom kernel but still randomly expirience Battery Drain when sensors are not working...
cheers for my bad english
Take a logcat and look inside for the errors/warnings.If you don't find anything unusual in the logs then it's just the hardware problem.
Same here :'( stock rom miui v5.
Joranz said:
Same here :'( stock rom miui v5.
Click to expand...
Click to collapse
Same - only reboot helps ...
DECURO Rom MIUI-45.0.0
yes reboot the device and its back to normal,...
i encountered it maybe once a week or so,,...
It's fixed on latest OTA v50
sensors.qcom seems to give battery drain issues on v45, but after trying v50 for a while there is no wakelock for that process when not in use.
So v50 is good to go....
Hope it helps...
Hello Guys, I just bought a Lenovo Z2 Plus and wanted to install a custom rom on it. I did my thorough research through XDA and Youtube about various OREO based custom roms available for this phone. I like the Pixel Experience Rom but I am a newbie in flashing custom roms. I read in few threads about network connectivity issues in the Pixel Experience Rom and Resurrection Remix rom as well. In few of the youtube videos, I saw that the battery backup and Antutu score of Pixel Experience rom is marginally lower when compared to Resurrection Remix.
Can you guys give me your opinion on which rom should I install on my stock device. Kindly please provide the respective rom's Antutu Benchmark scores and Screen On Time especially for the Pixel Experience Rom. Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Thanks.
I have tried the PE (Pixel Exp) ROM and here my observations on that.
The Good
Extremely fluid. Performance is mind blowing. I have tried 3 Custom ROM so far (AEX, RR, PE) and PE felt the best performing in terms day to day device usage. Feels like PE is meant for Z2 Plus and vise versa. Everything works out of the box, GApps are preloaded, ROM is simple but very effective. All sensors, every piece of hardware included in the phone works perfectly. I never felt it was a custom rom, felt like meant for Z2 Plus.
The Bad
Not just just pixel, this is present in all Custom ROM for me and my device. I am from India, and using Reliance Jio VoLTE.
Now the problem is network reception isn't as good as stock ZUI.
The 2.4GHz WiFi got limited to 72 mbps only. Stock ZUI has no problem, tried changing few ROMs and finally settled with AEX which I see can connect to 2.4GHz WiFi and 150 mbps. I have tried baseband 1.76 (ZUI 2.5.104 ST India) and baseband 1.70 (Latest) for ZUI 3.5.3xx China. Nothing seems to help. Out of 4 ROM, Stock ZUI (2.5/3.5), PE, RR, AEX, only ZUI and AEX are able to give me a 150 mbps wifi link speed.
Now regarding the VoLTE reception. VoLTE works fine but network is fluctuating like hell. For me, the same is present in all three custom rom I have tried. AEX, RR, PE. Tried baseband 1.70/1.76 but couldn't solve it. There are no call drops but network isn't stable at all. Tested with Reliance Jio NetVelocity app for detailed information and it seems with none of the Custom ROM, Phone is able to sustain a stable 2300 MHz link. Falls back to 1800 MHz and 850 MHz randomly. Network speed wasn't bad, infact I would say satisfactory.
Only ZUI seems to have a stable Jio reception for me.
The Ugly
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Presently using AEX ROM without any extra modification. Performance isnt as fuild as Pixel ROM but less problematic than others. Infact only ROM allowing me a 150mbps WiFi link speed.
Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Follow this guide to unlock the bootloader and install TWRP. Then installation processor of ROM will depend on which ROM you select. Note, there are two different ROM type now. 1. Full Treble 2. Non Treble. Installation process are different for them.
Pixel is a non treble ROM. Like 2 years ago, you would feel similar setup process.
If you chose Pixel, after you have unlocked and got TWRP installed,
1. download PE ROM
2. boot into TWRP
3. Wipe system, data, cache, dalvik
4. Flash ROM
5. Wipe Cache
6. Reboot
If all went ok, frist boot will take a few minutes and you will be asked to setup your Google Account under Pixel Exp ROM.
Remember, I am not an expert so wait for others to comment and guide you !! Just sharing from my personal experience !!
Good luck.
NaXal said:
I have tried the PE (Pixel Exp) ROM and here my observations on that.
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Click to expand...
Click to collapse
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
4tanmoy said:
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
@4tanmoy
One small mistake from my end. PE ROM comes with GApps included. So when you flash PE ROM, you don't need to Flash GApps again.
NaXal said:
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
Click to expand...
Click to collapse
thanks
4tanmoy said:
thanks
Click to expand...
Click to collapse
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
NaXal said:
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
Click to expand...
Click to collapse
Yes, I did some more research. Flashed PE with UberCool.
After Setup, I flashed AR Kernal and SuperSu.
Installed Google Camera Mod for HDR+ and Potrait Modes.
Flashed Dialer Fix to resolve the dialer problem as it showed that phone is not supported when launching dialer. now fixed.
The PE ui is butter smooth, phone doesnot heats anymore. Charged last night till 100 % and browsed youtube, downloaded my preferred apps from play store, browsed quora for 30 mins, took some pictures. In the morning I played subway surfers, clash royal, some web browsing, downloaded all remaining apps for my phone. The battery is now 59% while I typing this from the phone.
Overall, I am astonished by the PE smoothness and completely satisfied by the battery life.
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
NaXal said:
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
Click to expand...
Click to collapse
the wifi link speed is 72 mbps and about battery drainage overnight, i'll post tomorrow morning
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
4tanmoy said:
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
Click to expand...
Click to collapse
Thanks for the reply.
Your data is very similar to what I have experienced with Pixel ROM.
This drainage is one of the issue for which I had to move out of Pixel ROM
Excellent review, I too installed PE and is enjoying every bit of Pixel, but the main problem I am facing is ,my phone's all sensors are dead or not working has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Would like ask someone from the forum to please help me to fix the isaue, as far as Custom rom in Zuk 2 I will stick to Pixel as it is the best till now what ever I have used . I have TWRP installed has flashed sensor.zip available in the Zuk Forum but nothing seems to work.
Waiting for a reply from the forum members it they take out sometime to help a man is distress.
Kamal_halder said:
has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Click to expand...
Click to collapse
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
NaXal said:
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
Click to expand...
Click to collapse
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
If the issue is present with stock ROM also with bone stock phone, then it feels that the issue is with the Hardware.
Anyway, hope you find a solution and if you do, pls post that so that for reference if later down the some one needs he can fix his issue.
Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Lankapatiraawan said:
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Click to expand...
Click to collapse
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Kamal_halder said:
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Click to expand...
Click to collapse
How much for the display change?
I got a friend with cracked 3GB variant needing a display change. Just taking an idea about approximately how much you spent for this change
Hello guys,
I have poor battery life since the latest OOS update on my OP3T.
I don't do game or other ****...Just Fb/messenger and data use.
I know Fb drain battery but since the latest OOS update, it's really bad.
I don't have a lot of apps installed...
I turned off gesture, WIFI scan and other **** but no really improvment....
Wipe dalvick/cache, no changes...
Do you think it's related to the latest OOS update ? Any tricks to help my battery ?
BTW, do you think we will get a new OOS update on our 3T?
Thanks a lot,
Nixeus said:
Hello guys,
I have poor battery life since the latest OOS update on my OP3T.
I don't do game or other ****...Just Fb/messenger and data use.
I know Fb drain battery but since the latest OOS update, it's really bad.
I don't have a lot of apps installed...
I turned off gesture, WIFI scan and other **** but no really improvment....
Wipe dalvick/cache, no changes...
Do you think it's related to the latest OOS update ? Any tricks to help my battery ?
BTW, do you think we will get a new OOS update on our 3T?
Thanks a lot,
Click to expand...
Click to collapse
Sometimes OTA updates cause unexpected issues. Download the full ROM and clean flash. Most likely the issue will be resolved.
Hi,
I just received a notification this update is possible.
I'm looking for people who have noticed any new issues on this update.
Any issues such as the MIUI optimization slider being hidden in the dev settings or issues with the battery drain, or with the screen.
I'm aware these updates are made to fix issues supposedly but I can't help but think that they could introduce issues as well.
AkechiShiro said:
Hi,
I just received a notification this update is possible.
I'm looking for people who have noticed any new issues on this update.
Any issues such as the MIUI optimization slider being hidden in the dev settings or issues with the battery drain, or with the screen.
I'm aware these updates are made to fix issues supposedly but I can't help but think that they could introduce issues as well.
Click to expand...
Click to collapse
No issue
Drain issue fixed, 120hz still buggy, I need to delete battery data once a day.
Still is weekly 4.8,very stable but no DC,battery good .
wenjian065 said:
4.8,very stable but no DC
Click to expand...
Click to collapse
Sorry but I don't understand 4.8 of what ? And what does no DC (Direct Current?? Draining Current??) means ?
AkechiShiro said:
Sorry but I don't understand 4.8 of what ? And what does no DC (Direct Current?? Draining Current??) means ?
Click to expand...
Click to collapse
Eu weekly 21.4.8,DC is dimming
The EU MIUI ROM doesn't receive weekly updates at least for my EU MIUI ROM and it's latest version is not 21.4.8. Sorry if I misunderstood something here but could you be a bit more precise about what is EU weekly 21.4.8? I understand that the dimming screen issue is gone thanks.
DeathStroke47 said:
Or simply debloat the battery app
Click to expand...
Click to collapse
I did that nothing happened.I must restart the phone now because when I clear data of battery app that doesn't help and reinstall dont work.Battery app is on the phone and shows usage but in app management shows as never used.
DeathStroke47 said:
If you debloat battery and perfomance app, then screen refresh rate will stay either 120 or 60 until you reinstall that app.
Click to expand...
Click to collapse
No, it behaves tge same.Stays 120hz till random going 60hz and only reboot helps.Happens 1-2 times a day.
AkechiShiro said:
The EU MIUI ROM doesn't receive weekly updates at least for my EU MIUI ROM and it's latest version is not 21.4.8. Sorry if I misunderstood something here but could you be a bit more precise about what is EU weekly 21.4.8? I understand that the dimming screen issue is gone thanks.
Click to expand...
Click to collapse
you talk about stock rom, he talks about custom rom(stock rom name EEA not EU for EU phone).
https://xiaomi.eu/community/threads/21-4-28-29.61062/
once I'm on xiaomi.eu stable rom, can I update without losing data? either OTA or cable?
if so, How to? Thanks
originali said:
once I'm on xiaomi.eu stable rom, can I update without losing data? either OTA or cable?
if so, How to? Thanks
Click to expand...
Click to collapse
Yes it is possible. Check out this link:
[GUIDE][alioth] How to install Xiaomi.eu ROM for Xiaomi Redmi K40
How to install Xiaomi.eu ROM for Xiaomi Redmi K40 We will release fastboot ROM versions until TWRP for alioth is released Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!) - Update China ROM to the latest via updater...
xiaomi.eu