Develop Bugs

[Q] I can not rooting or unlocking oem on my terminal

''Sorry for my english, i'm speak spanish :S''
I have a Chinese phone that is supposed to be the Galaxy Note II (It is assumed, as it only appear in physical form), since I arrived one month ago rootearlo'm trying, but no way, leave a list of programs I've been tested:
-UnlockRoot
-SimpleOneClick
-Casual
-ADB
-Note 2 Toolkit
I think I've tried everything that exists, as even I downloaded a couple of programs that were completely in Chinese and did not work
I would like someone to help me on this issue because it brings rom my device is properly installed limited permits and will not let me do anything setup, overclocking and several apk's you can set it up for maintenance for the terminal. I am receiving always Permission denied or not found or the like
As I searched and no bootloader, or recovery, and when trying flashed from fastboot bootloader gives the following error "Unknow Partition Name" and gives no error recovery, but when trying to start it the phone gets caught.
The specification of my device
system:
-SDK version: 4.0.3
-ID: MocorDroid2.3.5
-OS name: Linux
-OS version: 2.6.35.7
device:
-Model: i7100
-Product: sprdroid_base
-Board: sp6820gb_s610v21
-Brand: BSX
CPU:
-Name: Dual-Core ARMv7 Processor rev 1 (V1L)
-Current freq: 1000MHz
-Min freq: 400MHz
-Cores: 2
-Arquitecture: 7
-BogoMIPS: 1024.00
-Hardware: mtk6517
-Revision: 1
-Serial #: 0000000000000000
I hope it is read and thanks for your attention.
Sincerely Legendariio.

legendariio said:
Tengo un telefono chino que se supone que es el galaxy Note II ( Se supone, ya que solo se parecen en la forma fisica), desde que me llego hace 1 mes estoy intentando rootearlo, pero no hay manera, dejo una lista de los programas con los que he hecho pruebas para que los veais:
-UnlockRoot
-SimpleOneClick
-Casual
-ADB
-Note 2 Toolkit
-etc.
Creo que he probado todo lo que existe, ya que incluso me descargue un par de programas que estaban completamente en chino y tampoco funciono
Quisiera alguien que me ayudase en este tema porque la rom que trae instalada mi dispositivo esta bien capada de permisos y no me deja hacerle nada de configuración, overcloking y varias apk's que pueda instalare para el mantenimiento para el terminal. Simpre me aparecen mensajes de Permiso denegado o no se encuentra o por el estilo
Por lo que se y he buscado no tiene BootLoader, ni recovery, y al intentar flashearlos desde el fastboot el bootloader da el siguiente error "Unknow Partition Name" y el recovery no da fallo, pero al intentar arrancarlo el telefono se queda pillado.
Carasteristicas de mi dispositivo
Sistema:
-SDK version: 4.0.3
-ID: MocorDroid2.3.5
-OS name: Linux
-OS version: 2.6.35.7
Dispositivo:
-Modelo: I7100
-Producto: sprdroid_base
-Board: sp6820gb_s610v21
-Brand: BSX
CPU:
-Name: Dual-Core ARMv7 Processor rev 1 (v1l)
-Current freq: 1000MHz
-Min freq: 400MHz
-Cores: 2
-Arquitecture: 7
-BogoMIPS: 1024.00
-Hardware: mtk6517
-Revision: 1
-Serial #: 0000000000000000
Espero que sea leido y gracias por su atencion.
Atentamente Legendariio.
Click to expand...
Click to collapse
Ok, your first post And You are not following a single rule. You are not posting in english nor reading And using the search tool. Read this And You will find all the information You Need.
http://http://forum.xda-developers.com/showthread.php?t=1930418

Sorry, I've solved
glevitan said:
Ok, your first post And You are not following a single rule. You are not posting in english nor reading And using the search tool. Read this And You will find all the information You Need.
http://http://forum.xda-developers.com/showthread.php?t=1930418
Click to expand...
Click to collapse
The method that you mentioned had already tried and not worked for me.

legendariio said:
The method that you mentioned had already tried and not worked for me.
Click to expand...
Click to collapse
If Yours Is a fake, then none of the methods in this forum will work. If it Is a variant, then find the forum for that Specific device. I7100 Is not the International version (GT-N7100).

glevitan said:
If Yours Is a fake, then none of the methods in this forum will work. If it Is a variant, then find the forum for that Specific device. I7100 Is not the International version (GT-N7100).
Click to expand...
Click to collapse
The thing is that there is an alternative if not a forgery based on this end and I suppose that being so there may be something that can be, but still there is nothing that can make or unlock root and has permissions to all and leaves no access anything.

legendariio said:
The thing is that there is an alternative if not a forgery based on this end and I suppose that being so there may be something that can be, but still there is nothing that can make or unlock root and has permissions to all and leaves no access anything.
Click to expand...
Click to collapse
You don`t have a N7100 but some cloned device. Google around for your model number for support.

gee2012 said:
You don`t have a N7100 but some cloned device. Google around for your model number for support.
Click to expand...
Click to collapse
What solution to offer me then rooting this device?

legendariio said:
What solution to offer me then rooting this device?
Click to expand...
Click to collapse
None, use Google and good luck.

Moto g5 hard brick

After installing security update with the unlocked bootloader my Moto g5 went into hard brick, wanted to know if there is any solution, I already tried to look for the flashbak of Moto g5 but not find there is any repair method?

Yukyud said:
After installing security update with the unlocked bootloader my Moto g5 went into hard brick, wanted to know if there is any solution, I already tried to look for the flashbak of Moto g5 but not find there is any repair method?
Click to expand...
Click to collapse
Only solution is a new motherboard or a repair shop with equipment to reimage the bootloader eg j-tag (such equipment costs about double the price of this phone to buy & requires knowledge of soldering pins etc so cheaper getting repair shop to do it)

I decided to just forget about my dead device. I can't sell it (for pieces) because it still contains my data inside. I will get something with better development when I get enough money. It wasn't a bad device, but it didn't really match my development needs.

RIP.

TheFixItMan said:
Only solution is a new motherboard or a repair shop with equipment to reimage the bootloader eg j-tag (such equipment costs about double the price of this phone to buy & requires knowledge of soldering pins etc so cheaper getting repair shop to do it)
Click to expand...
Click to collapse
you think that with a j-tag it is fine, I mean that if it can be repaired because I understand that it is not the bootloader that is deprogrammed but the boot itself.:confuso:

NABECKER16 said:
you think that with a j-tag it is fine, I mean that if it can be repaired because I understand that it is not the bootloader that is deprogrammed but the boot itself.:confuso:
Click to expand...
Click to collapse
Since I don't own one or tried I can't answer this question
A j-tag can be use to re-image a phone with original firmware if the phone cannot enter the bootloader

TheFixItMan said:
Since I don't own one or tried I can't answer this question
A j-tag can be use to re-image a phone with original firmware if the phone cannot enter the bootloader
Click to expand...
Click to collapse
then you think it's possible to repair it with a j-tag to take it to a workshop to repair my phone.
or better I wait for them to filter the blank flash files

NABECKER16 said:
then you think it's possible to repair it with a j-tag to take it to a workshop to repair my phone.
or better I wait for them to filter the blank flash files
Click to expand...
Click to collapse
You could be waiting years for blank flash files - they are leaked
They may never be leaked
Choice is yours

TheFixItMan said:
You could be waiting years for blank flash files - they are leaked
They may never be leaked
Choice is yours
Click to expand...
Click to collapse
so what do you suggest me do?
I take it with a technician to see if they can repair it with a box or with the j-tag or I hope the truth is that I do not know what to do.

NABECKER16 said:
so what do you suggest me do?
I take it with a technician to see if they can repair it with a box or with the j-tag or I hope the truth is that I do not know what to do.
Click to expand...
Click to collapse
Save money and buy a device that suits your needs better than this one. Sell your dead Moto G5 for pieces, since I guess the other components (screen, camera, speakers, USB port, battery, etc.) still work. I'm sorry, but there's nothing else you can do.

Ya crearon un blankflash para el hark brik de moto G5 plush pother, alguien que pueda crear uno para Moto G5 cedric

something new with the flash blank

New notice
NABECKER16 said:
something new with the flash blank
Click to expand...
Click to collapse
For now has no news, alias Moto g5 has not even 1 year of launching it will take to be leaked, the only solution for now is a technician who knows how to mess with JTAG or the motherboard exchange, it is possible that the for the May be leaked alo

this phone has more than a year that went to the market that was in February 2017 and not only is happening to this terminal but also to the successor to the motorola g5s and I do not think it takes so long to leave the blank flash since on the moto g4 / plus and moto z2 play came out before the year of being on the scoreboard.

Moto G5 Hard brick
Yukyud said:
After installing security update with the unlocked bootloader my Moto g5 went into hard brick, wanted to know if there is any solution, I already tried to look for the flashbak of Moto g5 but not find there is any repair method?
Click to expand...
Click to collapse
Hello everyone, I'm new here! My G5 bike has gone off and does not turn on anymore just the white led flashes. After a lot of research I discovered that I need to install firmeware again via QFIL, the problem is that I need 2 files one .xml and the other .mbn and I can not get them !!! Can someone here help me ??

Não tem
EbnerRJ said:
Hello everyone, I'm new here! My G5 bike has gone off and does not turn on anymore just the white led flashes. After a lot of research I discovered that I need to install firmeware again via QFIL, the problem is that I need 2 files one .xml and the other .mbn and I can not get them !!! Can someone here help me ??
Click to expand...
Click to collapse
Olá Ebner no momento não existe esses arquivos, celulares como Moto G5 plus já existem arquivos QFIL ou o firmware do flashbank, isso pode demorar pois é algo que a Lenovo não vai soltar, e só é lançado se for vazado ou criado pela propia comunidade, tem só dois meio de solução no Brasil, conserto via JTAG que custa em torno de 200 ou o conserto da placa que custa em torno de 600 reais, caso você tem hardbrick sem desbloquear o bootloader a Lenovo cobre todos custo de reparo, espero que tenha ajudado

moto g5 cedric se murio
Yukyud said:
Olá Ebner no momento não existe esses arquivos, celulares como Moto G5 plus já existem arquivos QFIL ou o firmware do flashbank, isso pode demorar pois é algo que a Lenovo não vai soltar, e só é lançado se for vazado ou criado pela propia comunidade, tem só dois meio de solução no Brasil, conserto via JTAG que custa em torno de 200 ou o conserto da placa que custa em torno de 600 reais, caso você tem hardbrick sem desbloquear o bootloader a Lenovo cobre todos custo de reparo, espero que tenha ajudado
Click to expand...
Click to collapse
me paso lo mismo por estar probando rom modificadas, actualmente mi moto g5 es un pisa papel tuve que comprar otro celular, ojala y alguien pueda crear el blakflash para este equipo ya que por lo pronto esta muerto

[HELP] Moto G6 Play XT1922-4 BRICKED

Hello friends, I installed a firm JETER on my MOTO g XT1922-4 and now it does not start, it only starts in Fastboot mode and then it shuts down. Then I discovered that the Firm that I had to install is an ALJETER .. I try to install an ALJETER Firm and it does not start .. Does anyone know anything? :crying:
Sorry for my English

Tu solucíon
Moderator Edit:
Please read the FORUM RULES - particularly #4

Is your bootloader unlocked? Why were you manually flashing firmware? Give us more information.

Please refer to this guide. It's helped many people so far https://forum.xda-developers.com/moto-g6/how-to/guide-twrp-root-magisk-t3848384/

Tengo algo parecido
Mi telefono es un moto g6 play dice SKU XT1601 .VARIANT SKU XT1922-4 JETER el botloader esta bloqueado la opcion oem no la active flashee una rom y cuando reinicio quedo en logo , no lo rotee y no pude desbloquear el botloader ya que no active la casilla en opciones de desarrollado la de desbloqueo oem , tengo mi telelfono en logo tarte de flashear una rom aljeter latam pero nada me arroja failed , mi modelo es el Moto g6 play 3gb Ram 32gb Almacenamiento pero dice jeter , que me recomendarian hacer

OoOoO buy another forget
Leo77mza said:
Hello friends, I installed a firm JETER on my MOTO g XT1922-4 and now it does not start, it only starts in Fastboot mode and then it shuts down. Then I discovered that the Firm that I had to install is an ALJETER .. I try to install an ALJETER Firm and it does not start .. Does anyone know anything? :crying:
Sorry for my English
Click to expand...
Click to collapse
If with all the content you have on the internet you have achieved nothing.
Buy another or take in a specialized assistance.

Ronaldch said:
Mi telefono es un moto g6 play dice SKU XT1601 .VARIANT SKU XT1922-4 JETER el botloader esta bloqueado la opcion oem no la active flashee una rom y cuando reinicio quedo en logo , no lo rotee y no pude desbloquear el botloader ya que no active la casilla en opciones de desarrollado la de desbloqueo oem , tengo mi telelfono en logo tarte de flashear una rom aljeter latam pero nada me arroja failed , mi modelo es el Moto g6 play 3gb Ram 32gb Almacenamiento pero dice jeter , que me recomendarian hacer
Click to expand...
Click to collapse
English only on XDA
Sent from my mata using XDA Labs

I can't unlock moto z2 force bootloader ONLY ONE CODE IS OUT / No puedo desbloquear bootloader de moto z2 force SOLO SALE UN CODIGO

Hello, I would like to know if you can help me for days that I want to unlock the bootloader of my moto z2 force model: xt1789-05, the problem I have is when I put the command fastboot oem get_unlock_data it only throws me a code of the 3 or 4 that me They have to come out when I put that code on the motorola page it says that it is not valid, my device is supposed to be able to unlock it, check it with the fastboot getvar command there, I hope you can help me, thanks
Hola, quisiera saber si me pueden ayudar hace dias que quiero desbloquear el bootloader de mi moto z2 force modelo: xt1789-05, el problema que tengo es cuando pongo el comando fastboot oem get_unlock_data solo me arroja un codigo de los 3 o 4 que me tienen que salir cuando pongo ese codigo en la pagina de motorola dice que no es valido, mi dispositivo se supone que si puede desbloquear lo cheque con el comando fastboot getvar all espero me puedan ayudar, gracias

yaelflores said:
Hello, I would like to know if you can help me for days that I want to unlock the bootloader of my moto z2 force model: xt1789-05, the problem I have is when I put the command fastboot oem get_unlock_data it only throws me a code of the 3 or 4
Click to expand...
Click to collapse
Code of 3 or 4 ? digits or lines?
It should be like
Code:
3A95150789279853#5A593332343538514234006D6F746F7067280000#26D7FCE37879FA22B14F17C1ABEC777EE3652E88#8EB67CA4000000000000000000000000
yaelflores said:
that me They have to come out when I put that code on the motorola page it says that it is not valid, my device is supposed to be able to unlock it, check it with the fastboot getvar command there, I hope you can help me, thanks
Click to expand...
Click to collapse
Try a different computer or USB port

sd_shadow said:
¿Código de 3 o 4? dígitos o líneas?
Debería ser como
[Código] 3A95150789279853 # 5A593332343538514234006D6F746F7067280000 # 26D7FCE37879FA22B14F17C1ABEC777EE3652E88 # 8EB67CA400000000000000000000000000000000000000000000 [/ Código]
Conveniente con una computadora o puerto USB diferente
Click to expand...
Click to collapse
sd_shadow said:
¿Código de 3 o 4? dígitos o líneas?
Debería ser como
[Código] 3A95150789279853 # 5A593332343538514234006D6F746F7067280000 # 26D7FCE37879FA22B14F17C1ABEC777EE3652E88 # 8EB67CA4000000000000000000000000000000000000 [/ Código]
Conveniente con una computadora o puerto USB diferente
Click to expand...
Click to collapse
Me refiero que en vez de salirme asi
(gestor de arranque) Desbloquear datos:
(cargador de arranque) 3A35130108459723 # 5A59323234394A
cargador de arranque 544A33004D6F746F205A200000 # 25CA
(cargador de arranque) 29846918508991D0B44C533FA455CE7
(cargador de arranque) EF956 # E896E03900000000000000000
(cargador de arranque) 0000000
BIEN [0,018 s]
Terminado. Tiempo total: 0.019s
Me sale asi
(gestor de arranque) Desbloquear datos:
(cargador de arranque) 3A3513010845972 # 3C
y no me dice
BIEN [0,018 s]
Terminado. Tiempo total: 0.019s
solo se queda la rayita

How To Guide Root Moto G20.

Guide to Rooting using a BOOT.IMG patched with Magisk.
ONLY WORKS WITH "MINIMAL ADB & FASTBOOT" - USING "PLATAFORM TOOLS" DOES NOT INSTALL.
It must be updated to the latest version "RTA31.68-25"
Turn off your phone. After power off, enter FASTBOOT mode, press volume + button and power button.
fastboot flash boot_a Boot_Root.img
Once it is done, type fastboot reboot and when it starts you will have to install magisk.apk.
(BOOT_ROOT.IMG FILE SHARED IN A TELEGRAM GROUP, AN ATTEMPTED TO PATCH THE BOOT.IMG FILE WITH THE MAGISK APPLICATION BUT DOES NOT BOOT. FOR NOW IT IS THE ONLY METHOD THAT WORKS.)
WE CONTINUE INVESTIGATING METHODS TO INSTALL GSI PERMANENTLY.
UNTIL NOW THE GSI ARE INSTALLED ONLY TEMPORARILY USING DSU.
_---------------------------
Guía para Rootear usando un BOOT.IMG parchado con Magisk.
SOLO FUNCIONA CON "MINIMAL ADB & FASTBOOT" - USANDO "PLATAFORM TOOLS" NO INSTALA.
Debe estar actualizado a la última versión "RTA31.68-25"
Apaga tu teléfono. Una vez apagado, ingrese al modo FASTBOOT, presione el botón de volumen + y el botón de encendido.
fastboot flash boot_a Boot_Root.img
Una vez que termine, escriba fastboot reboot y cuando comience, tendrá que instalar magisk.apk.
(ARCHIVO BOOT_ROOT.IMG COMPARTIDO EN UN GRUPO DE TELEGRAM, SE INTENTO PARCHAR EL ARCHIVO BOOT.IMG CON LA APLICACIÓN DE MAGISK PERO NO BOOTEA. POR AHORA ES EL ÚNICO MÉTODO QUE FUNCIONA.)
SEGUIMOS INVESTIGANDO MÉTODOS PARA INSTALAR GSI DE FORMA PERMANENTE.
HASTA AHORA LAS GSI SE INSTALAN SOLO TEMPORALMENTE USANDO DSU.
DOTOS 5.2 Y PIXEL EXPERIENCE A12 SUPER ESTABLES.

Grom9A said:
Guía para Rootear usando un BOOT.IMG parchado con Magisk.
SOLO FUNCIONA CON "MINIMAL ADB & FASTBOOT" - USANDO "PLATAFORM TOOLS" NO INSTALA.
Debe estar actualizado a la última versión "RTA31.68-25"
Apaga tu teléfono. Una vez apagado, ingrese al modo FASTBOOT, presione el botón de volumen + y el botón de encendido.
fastboot flash boot_a Boot_Root.img
Una vez que termine, escriba fastboot reboot y cuando comience, tendrá que instalar magisk.apk.
(ARCHIVO BOOT_ROOT.IMG COMPARTIDO EN UN GRUPO DE TELEGRAM, SE INTENTO PARCHAR EL ARCHIVO BOOT.IMG CON LA APLICACIÓN DE MAGISK PERO NO BOOTEA. POR AHORA ES EL ÚNICO MÉTODO QUE FUNCIONA.)
SEGUIMOS INVESTIGANDO MÉTODOS PARA INSTALAR GSI DE FORMA PERMANENTE.
HASTA AHORA LAS GSI SE INSTALAN SOLO TEMPORALMENTE USANDO DSU.
DOTOS 5.2 Y PIXEL EXPERIENCE A12 SUPER ESTABLES.
Click to expand...
Click to collapse
Spoiler: Please use English on XDA
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
📚 XDA Developers Forum Rules 📚
XDA-Developers FORUM RULES List of Forum Moderators, click HERE Delete Your XDA Account HERE 1. Search before posting. Use one of our search functions before posting or creating a new thread. Whether you have a question or just something new...
forum.xda-developers.com
Google translation below
Guide to Rooting using a BOOT.IMG patched with Magisk.
ONLY WORKS WITH "MINIMAL ADB & FASTBOOT" - USING "PLATAFORM TOOLS" DOES NOT INSTALL.
It must be updated to the latest version "RTA31.68-25"
Turn off your phone. After power off, enter FASTBOOT mode, press volume + button and power button.
fastboot flash boot_a Boot_Root.img
Once it is done, type fastboot reboot and when it starts you will have to install magisk.apk.
(BOOT_ROOT.IMG FILE SHARED IN A TELEGRAM GROUP, AN ATTEMPTED TO PATCH THE BOOT.IMG FILE WITH THE MAGISK APPLICATION BUT DOES NOT BOOT. FOR NOW IT IS THE ONLY METHOD THAT WORKS.)
WE CONTINUE INVESTIGATING METHODS TO INSTALL GSI PERMANENTLY.
UNTIL NOW THE GSI ARE INSTALLED ONLY TEMPORARILY USING DSU.
DOTOS 5.2 AND PIXEL EXPERIENCE A12 SUPER STABLE.
Click to expand...
Click to collapse

It must be updated to the latest version "RTA31.68-25"
Click to expand...
Click to collapse
Hi, I've upgraded my system but it's only RTA31.68-20 -> I can't upgrade to 25, because there is no such option.
Should it work if I use your Boot_Root.img?

iolk said:
Hi, I've upgraded my system but it's only RTA31.68-20 -> I can't upgrade to 25, because there is no such option.
Should it work if I use your Boot_Root.img?
Click to expand...
Click to collapse
I don't know, now I'm using Android 12 GSI

iolk said:
Hi, I've upgraded my system but it's only RTA31.68-20 -> I can't upgrade to 25, because there is no such option.
Should it work if I use your Boot_Root.img?
Click to expand...
Click to collapse
There's no more updates? Should be one more

Grom9A said:
There's no more updates? Should be one more
Click to expand...
Click to collapse
I think version 25 is available only for Brasil & Latin America - see this link:
MOTO G20 | Firmware Down
www.firmwaredown.com.br
As I have an European version I have only ver 20-2
How was the Boot_Root.img file produced? I could use Magisk to patch my ver-20-2 system but you wrote that it didn't work with Magisk.

iolk said:
I think version 25 is available only for Brasil & Latin America - see this link:
MOTO G20 | Firmware Down
www.firmwaredown.com.br
As I have an European version I have only ver 20-2
How was the Boot_Root.img file produced? I could use Magisk to patch my ver-20-2 system but you wrote that it didn't work with Magisk.
Click to expand...
Click to collapse
Some people try that on the telegram group, and they share the boot_root file

iolk said:
I think version 25 is available only for Brasil & Latin America - see this link:
MOTO G20 | Firmware Down
www.firmwaredown.com.br
As I have an European version I have only ver 20-2
Click to expand...
Click to collapse
I have to revise what I've written: after one day ver 20 changed to 20-2, and then one day later, it offered to upgrade to ver 25. So now I have ver 25. Sorry for misinformation.

Grom9A said:
fastboot flash boot_a Boot_Root.img
Click to expand...
Click to collapse
Hi again, I tried today to flash, but I got this error:
fastboot: error: boot partition is smaller than boot image
I'm on linux and I'm using regular platform tools. Can this be the reason?
You said "ONLY WORKS WITH "MINIMAL ADB & FASTBOOT" - USING "PLATAFORM TOOLS" DOES NOT INSTALL."
Was that the error that you experienced when using platform tools?
-------- EDIT
I found some Windows machine and can confirm that the Grom9A's method works with Minimal Adb & Fastboot.
I couldn't find any alternative for Linux.

I flashed the boot_root.img but when I reboot the phone magisk says its isn't installed, tried to patch boot.img but same thing, also my pc dosend recognize my device when it's on fastboot, have to enter on bootloader
also I have another problem, i cant unlock bootloader, because when i run the get_oem_data comand the numbers don't shown, it dont have any error mensage just the number are missing