Develop Bugs

Simple Root and Custom Recovery Installation (testers needed)

Read carefully please!
Froyo and Windows users only at this moment, very busy this days, will make it work with linux and mac os!:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Click to expand...
Click to collapse
You dont need adb installed on your PC!
TIPs: pass MOTOBLUR SETUP.
When you are on the begining of motoblur setup after you flashed your phone, (long press menu) to use the keyboard then type: eebluroff.
You must be done now!
Click to expand...
Click to collapse
Download the zip file and unzip it wherever you want.
Enable "USB debugging" on the phone before proceeding.
Settings -> Applications -> Development -> USB debugging.
1 - Connect your phone to PC (wait for your PC to install drivers) and click on "Install Gingerbreak & 2ndInitDefy".
Note: When commands window closes automatically, check if Gingerbreak and Defy 2init are installed on the phone (MOTOROLA SIDELOADER IS INSTALLED TOO to enable non-market apps), if they are everything is going fine.
2 - Unplug the phone from your PC.
3 - Open Gingerbreak installed on your phone and click on "Root device", (it will take a while) later your phone will reboot when completed.
4 - When your phone boots, go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
5 - Turn off the phone and turn it on, when you see the led light is blue press volume down button.
You are alredy into bootmenu ready to flash!
Click to expand...
Click to collapse
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You wont need superoneclick anymore to root!
I will make a video later! I installed Ubuntu I will try it in linux to make this work for every OS and why not MAC OS!

josuearisty said:
Froyo users only:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Testers needed
You dont need adb installed on your PC!
Download the file, unzip it wherever you want.
Remember to enable "USB debugging" before proceding.
Settings -> Applications -> Development -> USB debugging.
Then click on "Install Gingerbreak & 2ndInitDefy"
1 - Open Gingerbreak installed on your phone and click on "Root device", your phone will reboot when completed.
2 - Go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You dont need superoneclick anymore to root!
Click to expand...
Click to collapse
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....

Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.

mataflakitas said:
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Click to expand...
Click to collapse
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
brucezyc said:
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
Click to expand...
Click to collapse
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!

I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.

gracias
josuearisty said:
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
Click to expand...
Click to collapse
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos

oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy

skeevy420 said:
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
Click to expand...
Click to collapse
I think it is still not that simple, I will post some tips and be more specif.
mataflakitas said:
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
Click to expand...
Click to collapse
Siempre mi amigo, cualquier cosa estamos aqui.
kevins547 said:
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
Click to expand...
Click to collapse
Maybe you did not follow steps as you should, I think I have to make steps easier to understand, so that noobs and advanced users can do it all.
Thanks for trying!

when unglug the phone from Pc, the box USB debugging is tick in or not ?

kevins547 said:
when unglug the phone from Pc, the box USB debugging is tick in or not ?
Click to expand...
Click to collapse
Of course it has to be enable.
Else it is not going to work.

gracias
josuearisty said:
Of course it has to be enable.
Else it is not going to work.
Click to expand...
Click to collapse
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...

mataflakitas said:
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
Click to expand...
Click to collapse
Esta semana estare algo ocupado, el video creo que lo hare la semana que viene.
Usar el adb del archivo no te va a ocasionar ningun problema, ni a tu telefono ni a la computadora.
La aplicacion gingerbreak tiene un exploit dentro y los antivirus lo identifican como un virus, solo desactivalo si lo vas a usar.
--------------------------------------------------------
If you have adb installed on your pc, using this one will cause no problem to the phone or your pc.
Your antivirus detects gingerbreak as a virus because of an exploit command inside the apk file, you can deactivate your antivirus and use it with no problem, no risk with it.

I'll add, s1c/rage against the cage/gingerbreak all show up as viruses because they are. Not kill you PC virus, but virus none the less. Technically they're exploits, but still get picked up by scanners.

Gonna need some testers for LINUX and MAC, when its ready I will you know people!

Working great!. Will flash a Rom right now . Thnx to make our life easier!.

Took a few flashes, but I got there in the end! Great stuff, thanks!!

Worked like a charm. Thanks!!

LG G Pad 10.1 LG V700 -- [ QHSUSB_BULK ] -- Need KitKat 4.4.x KDZ....

LG G Pad 10.1
LG V700
Kernal: 3.4.0+
Build: LRX22G
Software: V70020c
Android Version: 5.0.2
I guess I will ask here -- seems like this device has zero support, even from LG.
Need the 4.4.x KitKat KDZ if possible -- for this tablet. If someone will share it I will host it. There seem to be NO LINKS ANYWHERE THAT WORK. I have the KDZ for the software that was on the tablet, but I was trying to downgrade and ended up in QHSUSB_BULK mode and using the SRKTool2.1 & LGFirmwareExtractor I think I can fix it, but I would love to go right to 4.4x KitKAt instead of back to Lollipop...

I have the same issue. I can't find any help on it and LG still hasn't responded to my warranty claim yet (of course I gave them a different reason for it not working). If you know a way to go back to Lollipop please share. Trying to get this thing back to any sort of working condition.

Just an update. I sent in for repair (covered by warranty) and they fixed it no problem. It's even the same tablet. I just made sure to play dumb and not say anything about rooting or anything when I called in. Took about 2 weeks from shipping it to getting it back. I'm just going to stick with rooting this time and not try install xposed or install a new recovery.

mixelpixx said:
LG G Pad 10.1
LG V700
Kernal: 3.4.0+
Build: LRX22G
Software: V70020c
Android Version: 5.0.2
I guess I will ask here -- seems like this device has zero support, even from LG.
Need the 4.4.x KitKat KDZ if possible -- for this tablet. If someone will share it I will host it. There seem to be NO LINKS ANYWHERE THAT WORK. I have the KDZ for the software that was on the tablet, but I was trying to downgrade and ended up in QHSUSB_BULK mode and using the SRKTool2.1 & LGFirmwareExtractor I think I can fix it, but I would love to go right to 4.4x KitKAt instead of back to Lollipop...
Click to expand...
Click to collapse
any luck? I still can't find a KitKat kdz.

Yo tengo la ROM v70010c.kdz
Buenos días buscando en internet conseguí la ROM v70010c y la v70020a tengo el mismo problema con mi tablet primero era qhsusb_bulk y después de instalar los controladores de qualcomm pase a qdloader 9008 pero ya de ahí no he podido pasar la v70010c si mal no recuerdo es la 4.4.2 No recuerdo de donde la baje porque pasé todo un día buscando y fueron muchas páginas visitadas pero si te sirve para probar dime a dónde la subo y como para compartirla con todo el mundo y si logras solucionar el problema espero puedas ayudarme tambien.

icebergz12 said:
any luck? I still can't find a KitKat kdz.
Click to expand...
Click to collapse
You can find it here -> http://forum.xda-developers.com/showpost.php?p=68012665&postcount=6

Hi*
V700 USER PLEASE READ !!!!!!
We need an loader image from an working v700 Gpad 10.1 to unbrick" (required:*Root*+ Terminal emulator*App)
in terminal type :
su
(grant*Root)
dd if=/dev/block/mmcblk0 of=/sdcard/loader.img bs=1024 count=168960
Thx in Advance**!!!!

Situación similar.
Hola
Mi Jefe compró en China una Lg GPad 10.1 y no funcionaba con el SIM de acá (Costa Rica). Antes había cambiado el software de algunos teléfonos y lo intenté con este. Lo logré bien con FlashTools, pero el firmware era el mismo original, conseguí otro (KDZ) pero al parecer no era para ese aparato. Ahora no entra en ninguno de los modos especiales, tampoco parece cargar y aparece como QHSUSB_BULK. ¿Puedes ayudarme?
luisjo05 said:
Buenos días buscando en internet conseguí la ROM v70010c y la v70020a tengo el mismo problema con mi tablet primero era qhsusb_bulk y después de instalar los controladores de qualcomm pase a qdloader 9008 pero ya de ahí no he podido pasar la v70010c si mal no recuerdo es la 4.4.2 No recuerdo de donde la baje porque pasé todo un día buscando y fueron muchas páginas visitadas pero si te sirve para probar dime a dónde la subo y como para compartirla con todo el mundo y si logras solucionar el problema espero puedas ayudarme tambien.
Click to expand...
Click to collapse

There is no Room for KYD?

Hello friends, I've been looking for the forum for several days and I can not find the right room for my device.
Update for MCU if I find it. (KYD-V2.83)
Room I found for KLG / KLD / SG / RM / JY / MD system but for my KYD system I did not find anything.
I do not risk putting another and I break my own.
Can you help me please?
The data of my team are:
Model number:
S07
S / N:
000D18A153AD
MCU version:
MTCB-KYD-V2.83
Nov 26 2015 18:50:54
Android Version:
4.4.4_21122015
Kernel Version:
3.0.36+
Root @ chun # 2837
Mon Dec 21 10:23:34 2015
Number of compilations:
Rk-3066-eng4.4.4 21122015. 17:55
CPU:
ARM Cortex-A9 @ 1.6GHz (x2)
Memory:
1024 MB
I'm getting a little crazy looking, I need help .....
Hola amigos, llevo varios dias buscando por el foro y no encuentro la Room adecuada para mi dispositivo.
Actualizacion para MCU si que la encontre. (KYD-V2.83)
Room encontre para sistema KLG/KLD/SG/RM/JY/MD pero para mi sistema KYD no encontre nada.
No me arriesgo a poner otra y se me rompa la mia.
¿Me podeis ayudar por favor?
Los datos de mi equipo son:
Model number:
S07
S / N:
000D18A153AD
MCU version:
MTCB-KYD-V2.83
Nov 26 2015 18:50:54
Android Version:
4.4.4_21122015
Kernel Version:
3.0.36+
Root @ chun # 2837
Mon Dec 21 10:23:34 2015
Number of compilations:
Rk-3066-eng4.4.4 21122015. 17:55
CPU:
ARM Cortex-A9 @ 1.6GHz (x2)
Memory:
1024 MB
Me estoy volviendo un poco loco buscando, necesito ayuda.....

You see the "MTCB" bit before your MCU number ? - it means you have an MTCB unit, you are in the "MTCB" forums, so you are in the correct place.
The manufacturer of your unit is not important because all versions from all 10+ manufacturers are virtually identical, please read the wiki in my signature for more info.
MCUs are here :
https://forum.xda-developers.com/showthread.php?t=3246386
You already have the latest for your unit.

typos1 said:
You see the "MTCB" bit before your MCU number ? - it means you have an MTCB unit, you are in the "MTCB" forums, so you are in the correct place.
The manufacturer of your unit is not important because all versions from all 10+ manufacturers are virtually identical, please read the wiki in my signature for more info.
MCUs are here :
https://forum.xda-developers.com/showthread.php?t=3246386
You already have the latest for your unit.
Click to expand...
Click to collapse
Thank you very much for your answer.
The MCU got it OK
My question is the following:
If I put a room "manufactured" android 4.4.4, if I do not like I can switch to Android from Witson factory?
Does any Room 4.4.4 made for my model?
Sorry for not explaining well, the translation is painful for me.
Thanks for the help.
Muchas gracias por tu respuesta.
El MCU lo tengo OK
Mi duda es la siguiente:
¿Si pongo una Room "fabricada" de android 4.4.4, si no me gusta puedo cambiar a Android de fabrica Witson?
¿Sirve cualquier Room 4.4.4 fabricada para mi modelo?
Perdon por no explicarme bien, la traduccion es penosa por mi parte.
Gracias por la ayuda.

pacoanaykiko said:
Thank you very much for your answer.
The MCU got it OK
My question is the following:
If I put a room "manufactured" android 4.4.4, if I do not like I can switch to Android from Witson factory?
Does any Room 4.4.4 made for my model?
Sorry for not explaining well, the translation is painful for me.
Thanks for the help.
Muchas gracias por tu respuesta.
El MCU lo tengo OK
Mi duda es la siguiente:
¿Si pongo una Room "fabricada" de android 4.4.4, si no me gusta puedo cambiar a Android de fabrica Witson?
¿Sirve cualquier Room 4.4.4 fabricada para mi modelo?
Perdon por no explicarme bien, la traduccion es penosa por mi parte.
Gracias por la ayuda.
Click to expand...
Click to collapse
You can use any MTCB or MTCC ROM that matches your processor type and screen resolution.

typos1 said:
You can use any MTCB or MTCC ROM that matches your processor type and screen resolution.
Click to expand...
Click to collapse
Well ... with that I think I'm going to be brave and I'll try.
Thanks for the help, if I have doubts I ask again. If I do well, I'll tell you how it goes.
Thanks again.
Bueno....con eso creo que me voy a ser valiente y lo voy a intentar.
Gracias por la ayuda, si tengo dudas vuelvo a preguntar. Si me sale bien os cuento como me va.
Gracias de nuevo.

De momento todo salio bien, me lio un poco con las aplicaciones, pero va bien.
Facil la instalacion y bastante rapida.
Se relentiza un poco con el uso de programas con gps.

rom for KYD
I have the rom for KYD head unit, engineer rom, which the KYD engineer sent to me after I phoned them up.
XDA not allow me to send the link unless i have post or repied over 10 thread.
if you cant wait, you can leave your email to me, i will send you the download link.

Necesito ayuda para cambiarle la rom a mi telefono MotoG7 Play/I need help changing the rom on my MotoG7 Play phone

Hola, quiero cambiarle la rom a mi telefono por una mas mejor, pero no encuentro la version de twrp para el telefono, ademas eh intentado aplicarle root pero no he tenido exito, cualquier ayuda o sugerencia es bienvenida.
Hello, I want to change the rom on my phone for a better one, but I can't find the twrp version for the phone, also I've tried to apply root but I haven't been successful, any help or suggestion is welcome.

Mystery Mx said:
Hola, quiero cambiarle la rom a mi telefono por una mas mejor, pero no encuentro la version de twrp para el telefono, ademas eh intentado aplicarle root pero no he tenido exito, cualquier ayuda o sugerencia es bienvenida.
Hello, I want to change the rom on my phone for a better one, but I can't find the twrp version for the phone, also I've tried to apply root but I haven't been successful, any help or suggestion is welcome.
Click to expand...
Click to collapse
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?

sd_shadow said:
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?
Click to expand...
Click to collapse
Esto es lo que me aparece
This is what appears to me

sd_shadow said:
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?
Click to expand...
Click to collapse
Esto es lo que me aparece
This is what appears to me

Mystery Mx said:
Esto es lo que me aparece
This is what appears to me
Click to expand...
Click to collapse
Yes so you are looking for TWRP for "channel" which is you device's codename

sd_shadow said:
Yes so you are looking for TWRP for "channel" which is you device's codename
Click to expand...
Click to collapse
¿Descargo la version channel de TWRP?
Me aparecio la version TWRP river para el G7 normal, ¿me puede servir esa?
Did you download the channel version of TWRP?
The TWRP river version appeared for the normal G7, can that help me?

Mystery Mx said:
¿Descargo la version channel de TWRP?
Me aparecio la version TWRP river para el G7 normal, ¿me puede servir esa?
Did you download the channel version of TWRP?
The TWRP river version appeared for the normal G7, can that help me?
Click to expand...
Click to collapse
Ya di con la versión correcta de twrp, es esa la que dijiste, pense que era un error en la traduccion ya que uso el traductor de google, no se ingles
I already found the correct version of twrp, is that the one you said, I thought it was an error in the translation since I use the google translator, I don't know English

Mystery Mx said:
Ya di con la versión correcta de twrp, es esa la que dijiste, pense que era un error en la traduccion ya que uso el traductor de google, no se ingles
I already found the correct version of twrp, is that the one you said, I thought it was an error in the translation since I use the google translator, I don't know English
Click to expand...
Click to collapse
Surgio un problema, instale el twrp channel pero cuando intento acceder desde el telefono, este hace bootloop, despues de 3 reinicios vuelve a iniciar normal, tengo que iniciarlo desde el pc ya que no puedo desde el telefono
A problem arose, I installed the twrp channel but when I try to access from the phone, it does bootloop, after 3 reboots it starts again normally, I have to start it from the pc since I can't from the phone

Question security test error no root

I have an error in the CTS profile match that gives me an error and I have not rooted the mobile...the support team tells me that it is not your original room...and I changed from room cn to room eu.... the McDonald's app doesn't work for me because of that..any solution to fix it without root?

jaimele said:
I have an error in the CTS profile match that gives me an error and I have not rooted the mobile...the support team tells me that it is not your original room...and I changed from room cn to room eu.... the McDonald's app doesn't work for me because of that..any solution to fix it without root?
Click to expand...
Click to collapse
Root it then..lol

Decrypted data, flashed modified super.img that is r/w with modified fstab, deleted some system apps, flashed 676.22 system drivers, gpu undervolted and slight overclocked to 692 mhz, twrp recovery, magisk and still I pass

Also didn't you flash custom recovery? Maybe because bootloader unlocked.. Not sure As soon as I received my device I unlocked bootloader and rooted.

JWnSC said:
No flasheé nada, solo recibió el terminal con la sala CN y lo cambió a través de la configuración y actualicé el archivo eu original de la sala ... y luego reinicié el móvil con el botón y el botón apagar - y me sale bloqueo del gestor de arranque. ..
Click to expand...
Click to collapse
Así que no sé por qué me sale ese error.

jaimele said:
Así que no sé por qué me sale ese error.
Click to expand...
Click to collapse
Reflash firmware to see if issue persist.

Just root it and bypass safteynet once and for all and free your device from 3rd party handcuffs and this type of nonesense. You own your device, not them.

No quiero rootearlo todavía... es difícil para mí instalar todas mis aplicaciones... incluso si hago una copia de seguridad, no copia todos los datos de todas las aplicaciones si no está rooteado

jaimele said:
No quiero rootearlo todavía... es difícil para mí instalar todas mis aplicaciones... incluso si hago una copia de seguridad, no copia todos los datos de todas las aplicaciones si no está rooteado
Click to expand...
Click to collapse
Hmm.. Well if you find out why it won't pass safety net even though your not rooted please let us know. I don't see how a stock device wouldn't pass it.. Like I say before, I think your bootloader being unlocked is affecting it.

Your bootloader is unlocked, that's why you're getting the error. Either install Magisk and patch the error, or go back to your original ROM and relock your bootloader (of course, without root, otherwise your smartphone won't work anymore).

Mitesoro said:
Su cargador de arranque está desbloqueado, por eso está recibiendo el error. Instale Magisk y corrija el error, o vuelva a su ROM original y vuelva a bloquear su cargador de arranque (por supuesto, sin root, de lo contrario su teléfono inteligente ya no funcionará).
Click to expand...
Click to collapse
It does not have root... Its original rom, I don't even know what it is... Last time I downloaded the one that came from the Red Magic website on 4.28 Europe/Asia and it doesn't work... I even installed a 3.18 version and it It left the phone useless and I had to format data..

As I have also seen, changing the text payload properties, deleting the "_un" file, it is configured to the global room, but of course I don't know if it is clean and it will continue with the error...

jaimele said:
It does not have root... Its original rom, I don't even know what it is... Last time I downloaded the one that came from the Red Magic website on 4.28 Europe/Asia and it doesn't work... I even installed a 3.18 version and it It left the phone useless and I had to format data..
Click to expand...
Click to collapse
Is OEM unlocking enabled on your device and you're unable to turn it off? If so, then your smartphone is unlocked, and you need to lock it; otherwise, the error will persist.
[ fastboot flashing unlock ] for unlocking bootloader
[ fastboot flashing lock ] for locking bootloader

The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked

jaimele said:
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
Click to expand...
Click to collapse
"Okay, that's really stupid. I thought maybe it would be the same mistake as mine. Maybe just open BL once and then close it again "

Mitesoro said:
"Okay, that's really stupid. I thought maybe it would be the same mistake as mine. Maybe just open BL once and then close it again "
Click to expand...
Click to collapse
I don't know what your problem is...

jaimele said:
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
Click to expand...
Click to collapse
I am confused. Have you installed a new ROM or not?
You said you changed from "cn" to "eu". You said one ROM left the phone unusable. You must have "flashed" a new ROM, several times. Maybe the problem is that the original ROM's identity is somehow known, and anything else will cause this mismatch. Try restoring the "cn" ROM.
Mostly out of curiosity: Have you enabled Developer Options? Do they show any kind of entry for "OEM unlock", even if greyed-out?
Maybe you should install one of the idiot "root checkers", like Momo or TBChecker. You might get a more detailed explanation of what it doesn't like, which *might* be related to what is making "CTS Profile" not pass.

J.Michael said:
Estoy confundido. ¿Has instalado una nueva ROM o no?
Dijiste que cambiaste de "cn" a "eu". Dijiste que una ROM dejó el teléfono inutilizable. Debe haber "flasheado" una nueva ROM, varias veces. Tal vez el problema es que la identidad de la ROM original se conoce de alguna manera, y cualquier otra cosa causará esta falta de coincidencia. Intenta restaurar la ROM "cn".
Principalmente por curiosidad: ¿Ha habilitado las Opciones de desarrollador? ¿Muestran algún tipo de entrada para "Desbloqueo OEM", incluso si están en gris?
Tal vez deberías instalar uno de los tontos "verificadores raíz", como Momo o TBChecker. Es posible que obtenga una explicación más detallada de lo que no le gusta, que *podría* estar relacionado con lo que hace que el "Perfil CTS" no pase.
Click to expand...
Click to collapse
If l change from rom uncommon to eucomon and it works correctly but does not pass the cts profile. The oem is grayed out and the bootloader is locked.

jaimele said:
If l change from rom uncommon to eucomon and it works correctly but does not pass the cts profile. The oem is grayed out and the bootloader is locked.
Click to expand...
Click to collapse
I thought you said that you started with "cn" and changed to "eu". I'm saying maybe that's what's wrong. Maybe the device somehow identifies itself as "naturally cn", so if it is not "cn", and you are not using a Magisk module to "spoof" its properties, it fails CTS Profile.
Even if you don't want to install Magisk, you might gain some insight by reading in the Magisk thread. I'm not sure what affects CTS Profile.

J.Michael said:
Pensé que dijiste que comenzaste con "cn" y cambiaste a "eu". Estoy diciendo que tal vez eso es lo que está mal. Tal vez el dispositivo de alguna manera se identifique como "naturalmente cn", por lo que si no es "cn", y no está utilizando un módulo Magisk para "falsificar" sus propiedades, falla el perfil CTS.
Incluso si no desea instalar Magisk, puede obtener información leyendo el hilo de Magisk. No estoy seguro de qué afecta al perfil CTS.
Click to expand...
Click to collapse
Pero antes recuerdo que funcionaba sin ser cn