Related
I had flashed STOCK ROM on my HTC wildfire s a510e but my mobile gets stucked on HTC logo screen. I have tried installing ROM many times by wiping data, wiping factory data, wiping delvik cache but still gets problem.I tried to flash superwipe but gets error as Installation abandoned.
So I downloaded Indian RUU for my mobile and followed guide of another forum on how to install it. but when I run that, phone boots but gets 171 error and I am being asked to connect usb properly where as I have connected it properly.
Please help fried. What should I do now?
No one here who can help in regarding this problem. Please Friends.
anupdada said:
No one here who can help in regarding this problem. Please Friends.
Click to expand...
Click to collapse
hey bro , open that ruu , and when it comes to welcome screen. dont proceed with installation, when it comes to welcome screen it extracts the files in temporary folder this is where you will find the STOCK ROM , go to temporary folder by following these instructions
1-Go to start menu
2-Open Run
3-Write
Code:
%TEMP%
4-Hit enter
Now in that folder search for ROM.zip (use the search option , you may get ROM1.zip and ROM2.zip , In that case select ROM1.zip)
When you will get this zip file , extract it to a folder in desktop , name the folder ROM
Now if you have android-sdk with the adb drivers then skip this text in blue and copy the adb adbwinapi and fastboot files to ROM folder on desktop, if you dont know what i am talking about then read the text in blue,
Download this http://www.mediafire.com/?81ao1oct0g533uj n then extract it in ROM folder , so in rom folder you will have three new files, adb adbwinapi and fastboot..
now open Command prompt by these steps
1-Open start menu
2-Open run
3-Type
Code:
CMD
hit enter
Now in this cmd write each code and press enter
Code:
cd desktop
Code:
cd ROM
now put your cell phone in bootloader mode , then go to fastboot option ,
then go to ROM folder , and check if you have these files
BOOT.img
System.img(it can be system-yaffs.img or something similar , rename it to system.img)
Now affter going to fastboot menu in mobile connect it with pc .
Now write these commands , press enter after each commmand and wait till it flashes
Code:
fastboot flash boot boot.img
Code:
fastboot flash system system.img
after this , reboot to recovery (CWM recovery) and wipe your data then power it on :good: it will be working then
mhrsolanki2020 said:
hey bro , open that ruu , and when it comes to welcome screen. dont proceed with installation, when it comes to welcome screen it extracts the files in temporary folder this is where you will find the STOCK ROM , go to temporary folder by following these instructions
1-Go to start menu
2-Open Run
3-Write
Code:
%TEMP%
4-Hit enter
Now in that folder search for ROM.zip (use the search option , you may get ROM1.zip and ROM2.zip , In that case select ROM1.zip)
When you will get this zip file , extract it to a folder in desktop , name the folder ROM
Now if you have android-sdk with the adb drivers then skip this text in blue and copy the adb adbwinapi and fastboot files to ROM folder on desktop, if you dont know what i am talking about then read the text in blue,
Download this http://www.mediafire.com/?81ao1oct0g533uj n then extract it in ROM folder , so in rom folder you will have three new files, adb adbwinapi and fastboot..
now open Command prompt by these steps
1-Open start menu
2-Open run
3-Type
Code:
CMD
hit enter
Now in this cmd write each code and press enter
Code:
cd desktop
Code:
cd ROM
now put your cell phone in bootloader mode , then go to fastboot option ,
then go to ROM folder , and check if you have these files
BOOT.img
System.img(it can be system-yaffs.img or something similar , rename it to system.img)
Now affter going to fastboot menu in mobile connect it with pc .
Now write these commands , press enter after each commmand and wait till it flashes
Code:
fastboot flash boot boot.img
Code:
fastboot flash system system.img
after this , reboot to recovery (CWM recovery) and wipe your data then power it on :good: it will be working then
Click to expand...
Click to collapse
Oh my god. I am very much thankful to you my friend. It worked. Yahoo. Pls do one more favor. Pls Tell what can I do about flashable ROM of Marvel. Its get flashed properly but than it gets stucked to HTC logo screen. Thanks once again.
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/a0f6b6cc9f19468bb6c24278361a3044/532549ec/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
i can't download Huawei Update Extractor
Azharla08 said:
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/07eee0ca707d998e0074fe7066df2e1b/5324e778/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
Click to expand...
Click to collapse
i can't download Huawei Update Extractor,there is something wrong with the link?
enlove said:
i can't download huawei update extractor,there is something wrong with the link?
Click to expand...
Click to collapse
link updated
Azharla08 said:
link updated
Click to expand...
Click to collapse
i can't download also
enlove said:
i can't download also
Click to expand...
Click to collapse
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
svvv said:
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
thinks!
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
kllnn8 said:
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
Click to expand...
Click to collapse
Yes you can do it provided if you have update.app file for your mobile and boot.img/recovery.img extracted from your update.app
where can i find update.app for huawei y320-u10?
Huawei ascend mate -
I rooted the device few days back and i also intastalled few fonts and was working like charm, i wanted to change the font and downloaded new font, apply -- restart--- disaster.... gone.. Now my PHONE is not starting up .. it stays awake in start up screen.. i tried Hard RESET .. but there were no files in cache as well recovery ..when i try to charge the update.app into sd in recovery mode, the phone don't see the file inside...plz help me.
No help for me? Please, i'm desperate.....
cloche said:
No help for me? Please, i'm desperate.....
Click to expand...
Click to collapse
Jus try this rom http://forum.xda-developers.com/showthread.php?t=2688699
Its b923 emui 2.0 beta version
Install as per the steps provided in the link
Make sure you put ur phone in Bootloader mode(Power + Vol down) before executing the .bat file.
Once installed and booted to OS copy the update.app file to dload folder in ur external sdcard goto settings and update using local mode that should install automatically.
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
cloche said:
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
Click to expand...
Click to collapse
Just put the mobile in bootloader mode and run the bat file. No need to enable debugging mode.
ignore first three installation steps in the above link...u start from step 4
no need to have unlocked bootloader
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
Press and hold the Power button and then press and hold the volume UP button to enter into fast recovery mode.
Then, download and extract the file Bootloader unlock from the link "http://goo.im/devs/joestone/Mate/MT1_BL_unlock.EXE" and Flash the files in fastboot.
Doesnt' work for me...
Out an errore message, Can not find the unlock.bat file...
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
first u have to connect the USB cable then switch off the mobile, now press the power button along with the volume down button the screen should say Huawei Ascend and will stay in that screen. Make sure all the drivers are installed only then it will get detected in ur PC check the Device manager in ur PC for android device if its there then ur mobile is detected. After all these steps execute the batch file.
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
cloche said:
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
Click to expand...
Click to collapse
Thats great...
Jus copy the update.app file to dload folder in ur external sdcard goto settings->about and update using local mode that should install automatically.
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Ctrl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Followed everything, but not able to install recovery
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
jagdish1747 said:
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Click to expand...
Click to collapse
Go to fastboot .connect pc
Enter fastboot -w
it will wipe everything thing including data
Reboot to fastboot again
Connect pc
Enter fastboot flash recovery recovery.img (download any recovery)
Reboot to recovery ..flash any os zip
Use volume down+power for fastboot
Use volume up+power for recovery
Where should i enter fastboot -w ???
Kiranshyd said:
Where should i enter fastboot -w ???
Click to expand...
Click to collapse
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Ubd debugging not enabled, mobile dead
light, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
joshi1 said:
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Click to expand...
Click to collapse
My mobile dead, only red light coming, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
https://docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE/view
Download this and extract to your desktop go to the folder
Hold left shift+ right click mouse u will get open command here it will open command window
Disconnect pc and mobile.
Switchoff mobile
Hold volume down +power u will enter fastboot mode
Connect pc now ... Pc will download drivers and install
If u never heard of oem lock ... First install adb drivers from here https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Then preloader by this guide
https://forum.xda-developers.com/showthread.php?t=2180436
Now open command prompt .. type
fastboot devices
U will get ur mobile there
Type
Fastboot oem unlock
It will unlock ur device ..
Then type
Fastboot -w
It will wipe everything
Download twrp.img from forum and rename it as recovery
https://dl.twrp.me/x3/twrp-3.1.1-0-x3.img.html
Place it in the same folder of fastboot
Type
Fastboot flash recovery recovery.img
It will show writing done or okay
Now hold volume up+power this will lead u to recovery
Download any rom and flash it
Thanks , My device is X500. Can i flash it?
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
hypermaster said:
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
Click to expand...
Click to collapse
Yes change updater script or just find 19s twrp flashable file
phone is dead after flash model x509
nrisnadeem said:
phone is dead after flash model x509
Click to expand...
Click to collapse
Cool, now buy a new phone
mannuelectronics said:
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
Click to expand...
Click to collapse
getting same error
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Sanjay354 said:
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Click to expand...
Click to collapse
Your screen is the problem. 3rd Party displays
Abhi_ said:
Your screen is the problem. 3rd Party displays
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
any idea on how to solve it? {im thinking i might be able to use my phone with a mouse and otg,although i haven't tried it yet}
Help
i am currently on Eui 5.5.014s and cannot update to latest Eui version please help !!!!!!!!!
NO Update Coming
naeem210 said:
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Cntl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition90
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
Click to expand...
Click to collapse
Can Anyone tell me why there is no update coming or when i try to install the update from the recovery of local update it says Failed to update -- cause : error with signature help me i want to update eui 5.5 to 5.8 pls
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Is your bootloader (still) unlocked and do you have access to fastboot?
Veran125 said:
Is your bootloader (still) unlocked and do you have access to fastboot?
Click to expand...
Click to collapse
Yes, bootloader's still unlocked and i have acces to fastboot.
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Thanks for your magic answer, but i can't find your toolkit, BUT i found this https://forum.xda-developers.com/mi...ol-tool-one-driversunlocktwrpfactory-t3866191. Is it good also ?
You can just get newest fastboot rom, and then flash with Miflash
Veran125 said:
You can just get newest fastboot rom, and then flash with Miflash
Click to expand...
Click to collapse
If it was too simply ... I think i did that already, But fastboot room, what do you mean with that ?
I just want, now, to be sure, can i save my phone ? It's not dead ?
Cause it's a very good phone and i don't want to loose it, really.
Nope, it's not dead, even with locked bootloader it wouldn't be. But now that you've got an unlocked bootloader, it's very easy to restore
I'm more happy so, 5 hours ( no fake really ) i search a solution .... SO
I found a global rom without .bat files in this folder so i got an error with Mi Flash Tool .. Tell me more about your idea
What's the error if I may ask?
Veran125 said:
What's the error if I may ask?
Click to expand...
Click to collapse
Can not found ( don't remember the file name).bat
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
-Tente isso:
Download this official rom: https://en.miui.com/download-354.html
Download this Mi Flash Tool: http://api.en.miui.com/url/MiFlashTool
*I'm assuming you already have the ADB drivers installed on your PC
*Remember to check the CLEAN ALL option
-If the above method does not work, do the following:
* It will only work if you do not have TWRP installed, if it is with twrp installed, I recommend reinstalling the original recovery *
1-Turn off the device and press (POWER BUTTON + VOLUME UP). At that point, the android doll will appear and spelled 'NO COMMAND'
2-Press only (POWER BUTTON) and click quickly (VOLUME UP BUTTON). In this screen you will see the recovery options, use the volume buttons to go to the WIPE DATA/FACTORY RESET option, confirm with YES and restart the device.
3- Wait patiently for 3/5 minutes.
-If none of this works and you can still access twrp, I recommend you try installing a GSI rom using this method: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-functional-twrp-magisk-pie-gsi-t3900119
I recommend this GSI rom (I'm using this now): https://get.resurrectionremix.com/?dir=gsi (choose 'arm64-ab')
This will give you a working system and make it easier to return to stock.
Hope one of these methods helped!
Hi all,
The problem was my PC i had not the .bat files so it couldn't work ...
Thanks @Bruno_Designer for your message, but i hate RROS but you're solution was good
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
If u alredy used twrp den u have adb.
U need mi flash tool.
Download any one of the full fastboot roms for Mi A2 Lie below:
9.6.4.0: https://xiaomifirmware.com/download/10399/
9.6.10.0: https://xiaomifirmware.com/download/10867/
10.0.3: https://xiaomifirmware.com/download/11586/
So to revive ur fone, u do dis. Dis was how i did mine.
1. After downloading a rom of choice, u extract on ur pc using winrar, 7zip or izarc. U basically open the archive using any of these software n copy out the folder contained. The name usually starts with "daisy global ...."
2. U open the extracted rom folder. U will see a bunch of files including "flash_all.bat" etc and a folder called "images".
3. Click on the address bar of d rom folder and copy the address. Den open "mi flash tool" and paste d copied address in the mi flash tool address bar n click on refresh.
4. Boot ur phone to fastboot mode, using "power" & "volume down" buttons together.
connect d phone to ur pc via usb cable.
5. Open ur adb folder and open the adb command window.
Type in the following, one after the other n click enter:
" fastboot devices " dis to confirm the adb connection
" fastboot oem edl " dis to enter edl mode. Ur fone led starts blinking at 1sec intervals.
6. Back to mi flash tool, u click on "refresh". After a second ur fone should be seen as a COM port "COM 10"
7. At d bottom right, u shd find 3 options. Selct "clean all". This shd leave ur bootloader unlocked after the process.
8. U click on "flash" button at the top right. All things going well, within 10 mins the process shd be done and u will see "green" indicator with "success".
9. Hold ur fone n press d power botton for 10 secs. Then ur fone shd power up. Give ur fone exactly about 5 mins to come up "look at the clock & dnt assume"
Dis is an edit of others tutorials. But this is exactly how it worked for me. As long as u use any of the 3 roms i linked u.
Unless i use edl mode, it jus doesnt work for me.
Good luck. Leta know how it goes. And pls click thanks if i helped u.
Problem solved
Thread closed at OP request
Basically I have rooted my old Redmi Note 4 but that was past guarantee so I did not care that much.
My current RN 8 Pro is still 1 year in guarantee so I literally do not have the balls to do it on my own.
Is there any good soul who would help me out with rooting it, pretty please? Thanks very much in advance
btw. I do know stuff about Unlocking Boot Loader, installing TWRP trough Command Window and Flashing Magisk...that should be potentially enough but as I said above no balls and do not want to F things up and brick it.
Redmi Note 8 Pro Guide [Firmwares | ROOT CN/GLOBAL | TWRP Recovery]
Redmi Note 8 Pro [Begonia] [Global Version Only] WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT...
forum.xda-developers.com
A great guide is here :3
Not sure you need my help for that but yeah if ya run into any problems, ill be here to help ya
Ty for responding. I read that but Im still not sure about what TWRP use on my phone (im not sure if i have to use special one or just latest version) and because I want to only root my phone Im also not sure, if I need to get a different ROM or I can do that on this STOCK ONE I have.
I bought my RN 8 Pro in EU. Im gonna try to give you more information about my phone, if you would be able to link me TWRP what I need and other files to root it...that would be awesome (its not like i cant read or im lazy f**k, its more like i dont want to F things up).
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
Thank you very much
1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Your device’s bootloader is unlocked
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Done!
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP
Hello once again...I might need some help
I was following these steps but after flashing this TWRP I cant enter into the TWRP...so far Ive tried holding power button then pressing Volume +; holding power button and then holding Volume+; even holding them both but still without any result...any chance you might help me here, please?
*EDIT: Im flashing stock ROM
Go to the system then do
adb reboot recovery
I flashed TWRP recovery once again, then I went for "adb reboot recovery". This is what happened after I used "adb reboot recovery" (attached picture). There is no sign about TWRP. What am I doing wrong? I literally followed the guide the flash of the recovery TWRP is successful. Is there any chance that Im flashing wrong TWRP recovery? Or that Im doing it on stock ROM? Usually its problem between chair and keyboard but I dont know :-/.
So Ive tried to boot TWRP through after flashing it with "fastboot boot twrp.img". It went through but it booted like normal so I ended up in system like when you turn on your phone normally.
Anybody, anything please?
N00B92 said:
Anybody, anything please?
Click to expand...
Click to collapse
First: what version of miui?
If you're on miui 12.5 this method will cause reboot.
If your phone is < 12.0.X its okay.
It looks like flashing recovery worked.
Instead of trying to adb reboot recovery after flashing recovery try this:
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
I was already trying that, if I do it how you typed the screen is gonna keep blinking with MIUI logo.
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
N00B92 said:
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
Click to expand...
Click to collapse
First you need to enter recovery, i think you didn't flash boot.
Follow the method below exactly.
Original post and files can be found here.
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
I dont have any boot.img in my folder so I cant flash the boot.img. Having stock ROM and I have no clue where to get it.
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Id appreciate any help
Everything I did try is above.
N00B92 said:
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Click to expand...
Click to collapse
madsponge26 said:
Redmi Note 8 Pro
[Begonia]
[Global Version Only]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Firmwares
Global Stable
V10.4.1.0.PGGMIXM
V10.4.2.0 to V11.0.10
V11.0.1.0 PGGMIXM
V11.0.3.0 PGGMIXM
V11.0.4.0 PGGMIXM
V11.0.6.0
China Stable
V10.4.4.0.PGGCNXM
V10.4.6.0.PGGCNXM
V10.4.8.0.PGGCNXM
V10.4.9.0.PGGCNXM
V10.4.10.0.PGGCNXM
V10.4.11.0.PGGCNXM
V11.0.1.0QGGCNXM
China Beta
V9.9.25
V9.10.17
India Stable
V10.4.3.0.PGGINXM
V11.0.1.0 PGGINXM
Europe (EEA)
V10.4.5.0.PGGEUXM
Indonesia
V10.4.2.0.PGGIDXM
V11.0.1.0PGGIDXM
Russia
V10.4.2.0.PGGRUXM
USB Drivers
Download
Unlock Bootloader
Enable OEM Unlocking
Unlock Here
Installing TWRP Recovery and ROOT
Enable USB Debugging - Goto Settings / Additional settings / Developer options / USB Debugging & USB debugging (Security settings) - Enable (If you have not activated Developer options, then Goto Settings / About phone / tap MIUI version 7 times - now developer options enabled.
Global Version
GLOBAL firmware V10.4.5.0.PGGEUXM only
Drivers installed properly
Enabled USB Debugging (enabled developers menu)
1. Turn Off
2. Go to Fastboot mode (Volume - + Power)
3. Connect to the PC
4. Download and extract in C drive, "Run as administrator" and execute "ifelixit+FLASHER+TOOLKIT+Begonia.bat".
5. Choose 1 (TWRP recovery) and enter or Choose 2 (Root Only)
Immediately disconnect the phone from the PC, otherwise it will go to reboot on command and the stock recovery will be restored.
6. Put the Minimal ADB and Fastboot in C: of your PC.
Transfer the Recovery.img in Fastboot folder
Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
7. Type fastboot flash recovery recovery.img and enter (TWRP will be installed)
8. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Stock boot IMG for V10.4.5.0.PGGEUXM just in case bootloop
TWRP for Begonia
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Proof of Video that Redmi Note 8 Pro Rooted
Contributors
Nikas
esleer
Xakep1993
SPIRITic
m3lbrunton
Lyelik74
@topjohnwu
TWRP Community
XDA Community
Xiaomi Community
Click to expand...
Click to collapse
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Kenora_I said:
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Click to expand...
Click to collapse
Thanks. I used the boot.img and I was following the guide which "donkyshot" sent. But I got stucked right after I did those commands in command Window. I disconnected the phone went for the power button hold and then when it was blank I stopped holding power button and I started holding the Volume+ button. The phone was bootlooped on Xiaomi logo...I was waiting several times but nothing. At the end I had to flash the phone with stock ROM I downloaded through MiFlash...I really dont know what I was doing wrong.