Related
So i have the drivers installed and when i connect my phone my computer pops out a little message that it didnt install or that usb device not recognized so then odin dosent recognize it either in download mode. Any ideas? sorry if this got poster somewhere else. I am trying different cables and different usb slots. This is happening on my laptop and pc.
t3moc said:
So i have the drivers installed and when i connect my phone my computer pops out a little message that it didnt install or that usb device not recognized so then odin dosent recognize it either in download mode. Any ideas? sorry if this got poster somewhere else. I am trying different cables and different usb slots. This is happening on my laptop and pc.
Click to expand...
Click to collapse
Your USB plug, or the micro end on the phone..very sensitive right there I hate it, and try switching ports on the compt'r. I am on my 4th USB chord from sprint?
Flash away!lol
Also with device connected go into control panel, device manager, find samsung Android under other or in USB ports. Click it and click update drivers...may take 20 minutes or so to get all the drivers from Windows Update.
t3moc said:
So i have the drivers installed and when i connect my phone my computer pops out a little message that it didnt install or that usb device not recognized so then odin dosent recognize it either in download mode. Any ideas? sorry if this got poster somewhere else. I am trying different cables and different usb slots. This is happening on my laptop and pc.
Click to expand...
Click to collapse
Did you get the drivers from Samsung or some place else?
Uninstall your drivers and download this
https://www.dropbox.com/s/l7s0a7chxftn4st/Samsung_Mobile_Driver_V1.3.800_For_SPH-d700_Epic_4G.zip
tazfanatic said:
Did you get the drivers from Samsung or some place else?
Uninstall your drivers and download this
https://www.dropbox.com/s/l7s0a7chxftn4st/Samsung_Mobile_Driver_V1.3.800_For_SPH-d700_Epic_4G.zip
Click to expand...
Click to collapse
Link is broken.
My drivers failed to install but I am still able to flash it and access my memory card with the usb cable. I tried the samsung drivers directly from there site, also tried others from links in the forum all to no luck. Just let the computer do its thing when you first plug it in, reboot and then try to do what you want.
Michowski said:
My drivers failed to install but I am still able to flash it and access my memory card with the usb cable. I tried the samsung drivers directly from there site, also tried others from links in the forum all to no luck. Just let the computer do its thing when you first plug it in, reboot and then try to do what you want.
Click to expand...
Click to collapse
This one is for the 32bit O/S, it's working I loaded it there. IF you have a 64bit O/S let me know will upload it and post up for you. "DUDe change the chord too!"
http://www.multiupload.com/3BBADK1GAM
i got an S3.. and my computer has xp pro. i had to restore my computer recently from a saved image of my system. before i restored my computer, i was able to connect my S3 to it via USB with no problem. but after i restored it, i'm unable to.
i downloaded and installed the MTP driver, which got my computer to recognize my phone before i restore it. but now its not working and i dont see it listed in Device Manager. whats weird is that when i connect my S3 to my computer, the phone doesnt give any notifications that the phone is connected to USB like it used to before. and it also doesnt give me the 2 options of connecting by either MTP or Camera. all it does is charge my phone. how do i fix this?
iranz said:
i got an S3.. and my computer has xp pro. i had to restore my computer recently from a saved image of my system. before i restored my computer, i was able to connect my S3 to it via USB with no problem. but after i restored it, i'm unable to.
i installed the MTP driver. but i dont see it listed in Device Manager. whats weird is that when i connect my S3 to my computer, the phone doesnt give any notifications that the phone is connected to USB like it used to before. and it also doesnt give me the 2 options of connecting by either MTP or Camera. how do i fix this?
Click to expand...
Click to collapse
Try a different USB cable. I had a similar problem and using another cable fixed it for me.
bigtom624 said:
Try a different USB cable. I had a similar problem and using another cable fixed it for me.
Click to expand...
Click to collapse
hi bigtom.. i tried that and it doesnt work. and like i said before, when i connect my phone to the laptop, all it does is charge the phone.. the phone doenst give me a notification that its being connected via USB. and i think its important to get this notification.
Make sure that USB Debugging is ticked.
Settings>Developer Options> USB Debugging.
USB Tethering
iranz said:
i got an S3.. and my computer has xp pro. i had to restore my computer recently from a saved image of my system. before i restored my computer, i was able to connect my S3 to it via USB with no problem. but after i restored it, i'm unable to.
i downloaded and installed the MTP driver, which got my computer to recognize my phone before i restore it. but now its not working and i dont see it listed in Device Manager. whats weird is that when i connect my S3 to my computer, the phone doesnt give any notifications that the phone is connected to USB like it used to before. and it also doesnt give me the 2 options of connecting by either MTP or Camera. all it does is charge my phone. how do i fix this?
Click to expand...
Click to collapse
You also might get the pdanet usb driver and install that in your PC in order to get the usb to recognize an internet access via USB.
You should be able to download the USB driver from PDANet's website.
Just a "maybe" thought. Hope it helps!
You might first want to check this link out:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Aloha
bobolinko said:
You also might get the pdanet usb driver and install that in your PC in order to get the usb to recognize an internet access via USB.
You should be able to download the USB driver from PDANet's website.
Just a "maybe" thought. Hope it helps!
You might first want to check this link out:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Aloha
Click to expand...
Click to collapse
i'll take a look at this and let you know..
but i believe the problem is my Windows Driver Foundation driver.. the service wont start. this driver worked to get my phone recognized by my PC before i restored it. but when i try to start the service, i get this error:
"Error 31: a device attached to the system is not functioning windows driver foundation - user-mode driver framework."
does anyone know how to start this service?
iranz said:
i'll take a look at this and let you know..
but i believe the problem is my Windows Driver Foundation driver.. the service wont start. this driver worked to get my phone recognized by my PC before i restored it. but when i try to start the service, i get this error:
"Error 31: a device attached to the system is not functioning windows driver foundation - user-mode driver framework."
does anyone know how to start this service?
Click to expand...
Click to collapse
Install kies if that doesn't do it then reflash the ROM
hey everyone,
first of all this is my first post and im new to this so please bear with me
I just bought a T-Mobile SGH-T889 Samsung Galaxy Note II running on Android 4.1.1 with build # JRO03C.T889UVALJ1
I am having some troubles connecting my phone to my computer via the the included usb cable
whenever I connect try to connect my phone to the computer, it would search for updates to install drivers but it would always say that the driver software was not installed due to no drivers found. from what I understand, they should be Samsung drivers but for some reason, mine says:
Qualcomm CDMA Technologies MSM X No driver found
Qualcomm CDMA Technologies MSM X No driver found
I did several searches on the forums but have yet to find a solution or driver for my phone. please help!
I have looked into this thread but the driver provided for the root kit is for Samsung V 1.5.9.0
Thanks!
Welcome to the forum!
I'd say to try uninstalling any Samsung drivers from your pc, then restart it. Go to the Samsung site and download the latest USB drivers. The ones provided in the kit usually work, and I'm not sure the ones on the site are any newer.
Once that is done, if you are still having problems, try a different USB cable.
Sent from my SGH-T889 using xda app-developers app
I had similar issues all I did was Change to another USB port.
Also I did a complete shutdown of the PC & phone not just a reboot.
thanks for the quick replies
I have tried several times or rebooting both the phone and the computer after installing the drivers but to no avail...
I have also tried changing to all the different usb ports on my computer but still no luck
I will try to find another cable in the house to see if that will work.
Will the samsung usb drivers work though? because i have tried those several times, the ones from the root kit as well as the ones from the samsung website but it still doesnt detect it. Are there qualcomm drivers available?
some other information that I forgot to mention earlier, I am running Windows 7 64-bit
sometimes when I connect the phone to the pc, it would load up this driver --> Qualcomm HS-USB Modem 9004 Driver
but then when i disconnect it, it wont detect it again...
a solution im thinking is maybe i should reset the phone to factory default settings? would that help?
For whatever reason, your pc is not recognizing the phone correctly. Can I ask, have you installed drivers for another phone on that pc in the past? What flavor of Windows are you running? Are you up-to-date? Have you tried disabling your firewall temporarily? Finally, try booting up in safe-mode and connecting the phone. That should let you see what it thinks your phone is when no drivers are installed.
Sent from my SGH-T889 using xda app-developers app
I had a Blackberry before but I had already removed all the software and drivers for it before getting the note 2 and I am currently running Windows 7 Home Premium 64-bit and they are up to date. I will try disabling my firewall and safe mode once i get home.
I re-read the tool-kit instructions and noticed i missed something. Am I supposed to put the phone into download or recovery mode before connecting the USB to the computer (after installing the USB drivers)?
I will have to try that once i get home as well... but I still dont understand why it shows up as qualcomm drivers instead of Samsung drivers
anyways thanks for the suggestions I will let you know how it turns out.
This problem is likely due to Samsung's USB cable, as noted in other threads.
Change the usb cable before trying anything else....
ok so i got the drivers to install finally...what i did was boot the phone in to download mode then connect the phone to my computer via usb cable and it worked...but for some reason it doesnt detect it when i launch the rootkit it does not detect my serial number
If i restart my phone normally, and then try to detect the phone again on the computer it will not detect it and goes back to saying the qualcomm CDMA technologies MSM is missing drivers again...
So the only way for it to detect the drivers is in download mode but i cant seem to get the rootkit to detect my phones serial number
1ns0mn1a said:
ok so i got the drivers to install finally...what i did was boot the phone in to download mode then connect the phone to my computer via usb cable and it worked...but for some reason it doesnt detect it when i launch the rootkit it does not detect my serial number
If i restart my phone normally, and then try to detect the phone again on the computer it will not detect it and goes back to saying the qualcomm CDMA technologies MSM is missing drivers again...
So the only way for it to detect the drivers is in download mode but i cant seem to get the rootkit to detect my phones serial number
Click to expand...
Click to collapse
EDIT: another question...so once i have the drivers installed, am i supposed to reboot the phone back normally (not download mode) for it to detect the serial number?
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I have had issues connecting the Note 4 to my PCs. I have tried multiple cables and computers. A usb error appears "Usb Device not recognized" "The last USB device you connected to this computer malfunctioned and WIndows does not recognize it." All PC's are running windows 8. I have tried connecting it via fastboot to flash to stock as well as through ADB and I cannot get anything to read the device.
Are you using the oem cable? Sometimes cheap generic cables give errors. Enable usb debugging and see if that helps. Good luck.
dteze88 said:
Are you using the oem cable? Sometimes cheap generic cables give errors. Enable usb debugging and see if that helps. Good luck.
Click to expand...
Click to collapse
Thanks but I've tried multiple. OEM and aftermakert cables. I found that when I put it in the charger it doesn't detect it as AC. I believe for some reason when the phone is connected to the PC it doesn't switch to MTP, which could cause the issue. I have wiped the phone, tried different roms, and installing plasma kernel. I am at my wits end. I have tried finding sprint's seceret number to dial, supposedly there's a menu to force MTP but I can't find it anywhere.
OK. So I couldn't connect via cable I tried flashing the stock image though mobile odin and now I lost recovery and the phone bootloops. Does anyone know a way to boot into recovery from the external SD card?
I would just flash the OF5 tar and start from scratch. http://forum.xda-developers.com/not...om-sm-n910p-stock-of5-odin-flashable-t3158114
Sounds like it's your computer.
Edit: Any other phone's Samsung or not able to connect? Does your phone charge with any or all of your cables? Hopefully the stock cable.
You need to go to Device Manager and Uninstall/reinstall the drivers pertaining to USB
Uninstall the samsung drivers
After that, unplug your powercord from the laptop
connect the phone to your usb port first and then replug your powercord and turn on your laptop
let the usb and samsung drivers reinstall(auto or manual)(if it detects it normally))
dteze88 said:
I would just flash the OF5 tar and start from scratch. http://forum.xda-developers.com/not...om-sm-n910p-stock-of5-odin-flashable-t3158114
Click to expand...
Click to collapse
I wish I could, the issue is that since I get this USB error, I can't get ODIN to detect my phone.
w7excursion said:
Sounds like it's your computer.
Edit: Any other phone's Samsung or not able to connect? Does your phone charge with any or all of your cables? Hopefully the stock cable.
Click to expand...
Click to collapse
I was able to get my Note 3 to connect with no problem, I was even able to get ODIN to detect it in Fastboot. I have one more cable I am going to try tonight, I have my girlfriend bringing it with her. I may have switched an S4 cable with the Note 4 cable. I hope this is the case.
xxSTARBUCKSxx said:
You need to go to Device Manager and Uninstall/reinstall the drivers pertaining to USB
Uninstall the samsung drivers
After that, unplug your powercord from the laptop
connect the phone to your usb port first and then replug your powercord and turn on your laptop
let the usb and samsung drivers reinstall(auto or manual)(if it detects it normally))
Click to expand...
Click to collapse
I was using my desktop, and I tried this on my laptop. Didn't work. Thanks though! I am wondering if this possibly could be a Windows 8.1 issue...
Anyways, 5.50 to anyone who gets this working.
I accidentally switched cables with my son's s4 and nothing would work. Figured it out and then I could connect to my computer. Could be the same thing lol.
w7excursion said:
I accidentally switched cables with my son's s4 and nothing would work. Figured it out and then I could connect to my computer. Could be the same thing lol.
Click to expand...
Click to collapse
I wish that was the case. I am wondering if it's a windows 8 issue now.
I'm on 8.1 pro, and my devices detects fine under cm12.1.
Have you tried going into Settings > Storage. select the 3 dot menu on the top right and force MTP or PTP detection while device is connected to PC / Laptop?