Hey guys,
As the title suggests, I'm looking for help in flashing GSI's(Generic System Images). I was looking through the Android developer website for Android 12 today and the 'Get a Generic System Image' tab caught my eye. I was wondering if any of you guys have experience in installing GSI's and could briefly outline the steps needed.
Here's the link of the Android 12 GSI if you're interested.
I guess I should post this is the general questions section but this is the device(Redmi Note 8) I can afford to experiment with at the moment so here I am.
Thanks in advance.
22naresn said:
I'm looking for help in flashing GSI
Click to expand...
Click to collapse
here is the guide
(GSI img for RN8 tend to be less stable, i suggest you use a normal rom)
22naresn said:
Android 12
Click to expand...
Click to collapse
there is already a complete A12 build for RN8 that you can flash directly
(be carefull in what firmware to flash)
loopypalm said:
here is the guide
(GSI img for RN8 tend to be less stable, i suggest you use a normal rom)
there is already a complete A12 build for RN8 that you can flash directly
(be carefull in what firmware to flash)
Click to expand...
Click to collapse
Wow, thanks man. This helps a lot.
Related
Hi,
Has anyone been successful in flashing the Android 10 GSI? Especially if you are using the Chinese RN8. Would like to hear how you've done it.
Thanks in advance.
Edit:
Managed to do it using resources from the Redmi Note 8 Discussions Telegram Channel. Just do a search for it and you'd likely find it.
Currently running PE Android 10 Unofficial. Some bugs but as this is a secondary phone not a big deal to me.
Same question here. I can see in phhusson's Github documentation that Redmi Note 8 is one of the devices which has successfully booted his AOSP GSI and I can't see any indepth guide and discussion on how it can be done here in XDA.
Some do claim that they were able to run it while here I am trying to make it work with no success. Be it AOSP 9 GSI or 10 it just won't work at all. I followed the GSI installation tutorial for the Mi 8 here with the same old results. The Redmi logo just keeps on bootlooping after following all instructions.
If there's anyone who were really able to boot these GSIs to their Ginkgos, do leave a reply here on what worked for you so that we can also give it a try. Much appreciated.
Hey,
I've try to flash GSI (phh-treble 10 V208) But the phone direct reboot in TWRP after that.... I wipe everything except vendor and flash gsi throught system but nothing work...
Also I have 8T (Willow) but it should works the same as Ginko... Any helps ?
I'm still waiting to get my ginkgo, but I found this, could it help?
HijoProdigo said:
I'm still waiting to get my ginkgo, but I found this, could it help?
Click to expand...
Click to collapse
Will definitely let you know how this goes
Lyves said:
Will definitely let you know how this goes
Click to expand...
Click to collapse
Stay safe over there! Just saw the news...
HijoProdigo said:
Stay safe over there! Just saw the news...
Click to expand...
Click to collapse
Thanks man. I'm miles away from the scene hence why I'm safe.
Going back, I still can't figure out how to make those GSIs work. I'll ask those on the Telegram group where that link originated from so that I can check whether someone was really able to make it work.
Good idea, I'm checking it too. Just got my RN8, and once I get back home I'll unlock it and give it a try.
Important! On this device run only Arm64 AB gsi rom!!!
https://t.me/ginkgo_dev/45
Vendor and kernel to flash gsi.
Giving a bump here as I've managed to do this. See OP for info.
Uwai yan said:
https://t.me/ginkgo_dev/45
Vendor and kernel to flash gsi.
Click to expand...
Click to collapse
Even trying that, I can't boot the Android 10 gsis :crying:
Hello,
Has anyone tried installing a GSI rom on MI10T?
I'm interested in getting feedback and if it works for you.
Thanks
Tried and failed. Don't know what I did wrong and I'm pretty new to this stuff so don't have that much experience. I'm sure it's possible.
TWRP for this phone doesn't support installing GSI, I bricked my phone because of it
If you tried ab that's probably why you failed - ab has different partition layout than aonly which is this device... Somebody should try aonly gsi and check...
Can you install system gsi? Because there is only a super partition in TWRP.
Novladek said:
Can you install system gsi? Because there is only a super partition in TWRP.
Click to expand...
Click to collapse
When new TWRP 3.5.0 gets fixed it will work good because it supports dynamic partitions properly
So
calinorg said:
When new TWRP 3.5.0 gets fixed it will work good because it supports dynamic partitions properly
Click to expand...
Click to collapse
So both 10t and 10t pro have a only ?
[email protected] said:
So
So both 10t and 10t pro have a only ?
Click to expand...
Click to collapse
Yes. If you do fastboot getvar all you won't get boot slot etc which is normal on a/b roms
calinorg said:
Yes. If you do fastboot getvar all you won't get boot slot etc which is normal on a/b roms
Click to expand...
Click to collapse
You seem quite knowledgeable. Is there a chance you will make a gsi flashing guide later on ? Maybe trying out some ROMs like pixel experience or havoc
[email protected] said:
You seem quite knowledgeable. Is there a chance you will make a gsi flashing guide later on ? Maybe trying out some ROMs like pixel experience or havoc
Click to expand...
Click to collapse
I've tried couple of them without success, so no guides until i find one that works
Hi guys! Any news?
As the title suggests. I recently bought my 7T and wanted to install XTended but it appearently built on Android 11 while my device is still on 10 (OxygenOS v10.0.15 HD65BA).
Just want to make sure. This will be the first time I attempt to flash a custom ROM and I don't want to mess up because of stuff like this.
Of course
Lossyx said:
Of course
Click to expand...
Click to collapse
Really?
I just want to make sure because I saw on the post of Ressurection Remix this point and it got me worried
"1. In general, you want to have the SAME version of OOS on both sides. Im not going to go into detail on how to MSM, and flash a full OTA locally, reboot, then flash the same OTA locally again and reboot."
Is this step already covered when installing a Android 11 ROM or is that something I can disregard? Or should I make sure I do that as well?
CardinalKyle said:
Really?
I just want to make sure because I saw on the post of Ressurection Remix this point and it got me worried
"1. In general, you want to have the SAME version of OOS on both sides. Im not going to go into detail on how to MSM, and flash a full OTA locally, reboot, then flash the same OTA locally again and reboot."
Is this step already covered when installing a Android 11 ROM or is that something I can disregard? Or should I make sure I do that as well?
Click to expand...
Click to collapse
Well, it first depends if the ROM is using OOS10 or OOS11 blobs. I've seen lots of people install A11 ROMs before OOS11 were even out.
But I'd go into the ROMs telegram group or something and ask just to be safe.
Lossyx said:
Well, it first depends if the ROM is using OOS10 or OOS11 blobs. I've seen lots of people install A11 ROMs before OOS11 were even out.
But I'd go into the ROMs telegram group or something and ask just to be safe.
Click to expand...
Click to collapse
Alright thanks! I'm gonna try and ask them
Of course
It works perfectly
hi
im currently on ArrowOS A11. wanted move to XIAOMI EU A12. the problem is i will lose TWRP and TWRP for A12 isnt available yet .
so i was wondering what's the best way to flash ? via fastboot or twrp ?
thx ya'll
The only way to install A12 is via fastboot at the moment.
dotzi75 said:
The only way to install A12 is via fastboot at the moment.
Click to expand...
Click to collapse
thx. could you give me a link to tutorial ?
jewsus1337 said:
thx. could you give me a link to tutorial ?
Click to expand...
Click to collapse
There are many tutorials in the www. Google is your friend ;-)
You need the fastboot rom from xiaomi.eu and adb platform tools...
Search for this via google...
Good luck
dotzi75 said:
There are many tutorials in the www. Google is your friend ;-)
You need the fastboot rom from xiaomi.eu and adb platform tools...
Search for this via google...
Good luck
Click to expand...
Click to collapse
since you use One OS. is that better than Xiaomi eu
jewsus1337 said:
since you use One OS. is that better than Xiaomi eu
Click to expand...
Click to collapse
I think One OS is based on Xiaomi.eu but with few added features and changes.
I tried it, and it's very similar to Xiaomi.eu. but I still use Xiaomi eu for faster updates and perhaps more stability(?).
dreamytom said:
I think One OS is based on Xiaomi.eu but with few added features and changes.
I tried it, and it's very similar to Xiaomi.eu. but I still use Xiaomi eu for faster updates and perhaps more stability(?).
Click to expand...
Click to collapse
alright im about to flash to xiaomii eu android 12. wish me luck
jewsus1337 said:
alright im about to flash to xiaomii eu android 12. wish me luck
Click to expand...
Click to collapse
I want to mention I don't use Xiaomi.eu Android 12 yet. I'm still on 21.9.15. I will update when an Android 12 build comes out that starts to be mostly bugfree.
jewsus1337 said:
since you use One OS. is that better than Xiaomi eu
Click to expand...
Click to collapse
For me One OS is better than xiaomi.eu. A little more costumization, better battery life. For other people is xiaomi.eu the better choice, but for me is one OS.
im wondering if its possible to use twrp to flash stock oos on op9 pro?
if it is, does anyone have a flashible rom for 11.2.10.10?
this.guy.lol said:
im wondering if its possible to use twrp to flash stock oos on op9 pro?
if it is, does anyone have a flashible rom for 11.2.10.10?
Click to expand...
Click to collapse
that flashable zip and others our collected here:
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
I have not flashed them in TWRP, but may be possible now. I did sideload via twrp successfully a few months ago
this.guy.lol said:
im wondering if its possible to use twrp to flash stock oos on op9 pro?
if it is, does anyone have a flashible rom for 11.2.10.10?
Click to expand...
Click to collapse
Mate, you are posting a lot of threads with a lot of questions about stuff that has already been posted.
Please do some research. Use the search function, read, learn...