No SPO2 monitoring while sleeping on Watch 4 - Samsung Galaxy Watch

Been trying to get this to work for a few days now, but my new Watch 4 will simply not record SPO2 while sleeping. I've followed the instructions to the letter, but no luck. The Snore detection in combination with my phone works fine. Anyone have any luck getting this to work on the Watch 4 or Watch 4 Classic?

Related

Google maps navigation is lagging

Hi,
I have a very annoying problem with the navigation with Google maps on my Huawei Watch in combination with my Xperia Z3. When I open maps without navigating somewhere, the map shows my location and is scrolling more or less in real-time.
As soon as I start navigating, the map does not show my location in real-time anymore. Every 10 seconds the map gets updated and in between nothing happens or moves.
Is do not expect this to be a feature so I suppose something is not working properly.
I have already tried to factory reset the watch and re-sync apps. Did not help. Maps on the smartphone is working flawlessly.
Does anybody else have this problem?
I think it just work that way. Annoying.
Wysłane z mojego HTC One M9 przy użyciu Tapatalka
SpoOokY1983 said:
Hi,
I have a very annoying problem with the navigation with Google maps on my Huawei Watch in combination with my Xperia Z3. When I open maps without navigating somewhere, the map shows my location and is scrolling more or less in real-time.
As soon as I start navigating, the map does not show my location in real-time anymore. Every 10 seconds the map gets updated and in between nothing happens or moves.
Is do not expect this to be a feature so I suppose something is not working properly.
I have already tried to factory reset the watch and re-sync apps. Did not help. Maps on the smartphone is working flawlessly.
Does anybody else have this problem?
Click to expand...
Click to collapse
Just a thought, have you tried using the android app 1.3? I know calls are delayed with the 1.4 app update and have read that 1.3apk will work. I personally haven't tried it, but it's worth a shot. Check to see if the apk will work below...
http://www.apkmirror.com/apk/google-inc/android-wear/
SpoOokY1983 said:
Hi,
I have a very annoying problem with the navigation with Google maps on my Huawei Watch in combination with my Xperia Z3. When I open maps without navigating somewhere, the map shows my location and is scrolling more or less in real-time.
As soon as I start navigating, the map does not show my location in real-time anymore. Every 10 seconds the map gets updated and in between nothing happens or moves.
Is do not expect this to be a feature so I suppose something is not working properly.
I have already tried to factory reset the watch and re-sync apps. Did not help. Maps on the smartphone is working flawlessly.
Does anybody else have this problem?
Click to expand...
Click to collapse
As far as I know navigation on watch is depending on two factors:
1. Bluetooth connection between phone and watch
2. The position of the phone becoause the gps function is performed by the phone, not the watch.
So, please try to keep your phone in a good position to "see" the sky AND close to your watch.
My Watch is lagging everywhere..
Force close 2/3 times a day..
every day at least 1 time is not reconnecting to the phone..
Any clue?
sartan said:
My Watch is lagging everywhere..
Force close 2/3 times a day..
every day at least 1 time is not reconnecting to the phone..
Any clue?
Click to expand...
Click to collapse
1.Factory reset your watch
2.check to have the latest version of android wear installed on your phone and watch
3. Is your watch heating?
calinormy said:
1.Factory reset your watch
2.check to have the latest version of android wear installed on your phone and watch
3. Is your watch heating?
Click to expand...
Click to collapse
No is not heating..
I try the reset..
sartan said:
My Watch is lagging everywhere..
Force close 2/3 times a day..
every day at least 1 time is not reconnecting to the phone..
Any clue?
Click to expand...
Click to collapse
I have the same problem!
I cant even use maps on my huawei watch because it rotates all the time.
I have tried everything but cannot get maps to work smooth in navigation mode. I will wait for firmware 1.4. Hope it will fix it.
It just does not work. commands are not communicated on time to be aware about direction. For car it is useless. Maybe if you walk it is fast enough, but i don't find it useful.

Huawei watch forgetting apps?

Hi all,
I appear to have a strange issue. When I had the Nexus 6p there was no issue whatsoever, I then moved to the s7 edge and for some reason when either the battery dies or when the phone disconnects from the phone it forgets certain apps like unified remote and watchface premium resetting all my watch faces over and over again.
Anyone else had this issue? Or similar issues? Any thoughts?
Thanks,
Could mods move this to the general section so it can get more views?
I'm using Watchmaker Pro faces on my Watch Classic running stock MM and I've never lost the selected face after turning off the watch or my S7 Edge.
But I've never let the watch discharge completely or voluntarily unpaired the Bluetooth connection with the phone.

Camera 4k mode causes phone to crash + get very hot

My phone is stock and updated, purchased day 1 of release. I have videos set to record in 4k but after a few minutes use the phone starts to get pretty warm, few minutes more and its hot and then maybe a few mins more (say 6-10) it will lock up. The only thing I can do is reset the phone....
Does anyone else get this problem using the stock camera app ?
NX3 said:
My phone is stock and updated, purchased day 1 of release. I have videos set to record in 4k but after a few minutes use the phone starts to get pretty warm, few minutes more and its hot and then maybe a few mins more (say 6-10) it will lock up. The only thing I can do is reset the phone....
Does anyone else get this problem using the stock camera app ?
Click to expand...
Click to collapse
Are you running out of storage space by chance? I read that 4k videos are limited to 5 minutes but I've not tested that myself.
Sent from my Nexus 5X using XDA-Developers mobile app
Loads of space as got the 32gb version of the phone. Its not complaining I'm out of space and I use google photos so just clears photos and videos once uploaded (it pops up and asks when I am low).
The heat lock up issue is the problem, everything else is working fine for me.

Samsung Gear S3 Connection Issues

I recently purchased a Redmi Note 8, and have owned a Samsung Gear S3 watch from before, fully functioning. However after making the switch and resetting my watch and trying to pair it with my phone through bluetooth, a few moments in each time, a consistent error popped up: 'Connection Failed, try again'
All plugins and apps have been installed, the watch has been reset, the watch shows up and stays on the bluetooth list just fine, however the issue arises when I try to pair the two. Can anyone help me out? I use this watch a lot and I need it to work with this.
floopydisk said:
I recently purchased a Redmi Note 8, and have owned a Samsung Gear S3 watch from before, fully functioning. However after making the switch and resetting my watch and trying to pair it with my phone through bluetooth, a few moments in each time, a consistent error popped up: 'Connection Failed, try again'
All plugins and apps have been installed, the watch has been reset, the watch shows up and stays on the bluetooth list just fine, however the issue arises when I try to pair the two. Can anyone help me out? I use this watch a lot and I need it to work with this.
Click to expand...
Click to collapse
Same problem. It is the ReNo8 problem. I use the galaxy watch and never can pair. No issues on A20 or Realme C2 which I tested on. Seems no solution so far so will most likely sell this phone
i am trying to connect a Samsung S3 frontier to a Xiaomi Redmi note 8T , but i can't. Same problem as above. Any ideas?

Question Galaxy watch issue

I recently started wearing my galaxy watch that I've had for a couple years and I have a rooted stock OnePlus 9 pro on the latest firmware and version and the watch initially connected to my phone and did the whole set up, got notifications and everything then I opened the wearable app and it's now giving me an issue with needing to update the watch plugin but when it goes to the playstore it only gives me the option to uninstall is the update only for Galaxy phones? Anyone know of a way to fix it?

Categories

Resources