Related
Hi everyone,
I really need your help, I need a tot file for F180K so that I could return to the official stock version.
So dump of me, I flashed KDZ to convert it to E975 but i don't get a network signal anymore. I flashed back to korean rom, f180k20g (jb version) but to no avail, still the same. If someone kindhearted would generously provide a tot file for this device, I would greatly appreciate it.
P.S.
Thanks to the guys at the forum, I learned a lot from you.
-fiddy619
-wifi
-autoprime
-shellnutt2
Hi,
I have the same problem with the mobile network. Now I try to download the new F180K201_00 and I'll flash it hoping that it helps....
But I have a copy of F180K10H_00 that suit you.
But a question. Did you try factory hard reset and wipe? Did you flash the right baseband?
Ciao
pgdg71 said:
Hi,
I have the same problem with the mobile network. Now I try to download the new F180K201_00 and I'll flash it hoping that it helps....
But I have a copy of F180K10H_00 that suit you.
But a question. Did you try factory hard reset and wipe? Did you flash the right baseband?
Ciao
Click to expand...
Click to collapse
Yes i tried factory hard reset only. I don't know how to wipe. I already tried F180K20G firmware but it is still not working. I haven't flashed any baseband because there is no available baseband img file yet for F180K. I already tried to flash anything from E97510a philippines or 10b HK version but still not working. I hope someone can provide a tot file so that we can boot back from scratch.
EDIT:
The only thing that I regretted is that I didn't back up the efs partition before I flash. If only I have learned about the freegee stuff earlier.
michaelgeorge said:
Yes i tried factory hard reset only. I don't know how to wipe. I already tried F180K20G firmware but it is still not working. I haven't flashed any baseband because there is no available baseband img file yet for F180K. I already tried to flash anything from E97510a philippines or 10b HK version but still not working. I hope someone can provide a tot file so that we can boot back from scratch.
EDIT:
The only thing that I regretted is that I didn't back up the efs partition before I flash. If only I have learned about the freegee stuff earlier.
Click to expand...
Click to collapse
Hi I just found the baseband for all F180 models in a Vietnamese website, there is a file .bat to execute for all models.
Source:http://www.tinhte.vn/threads/optimu...p-root-recovery-up-rom-4-1-2-fix-loi.1816719/
I droped the file on mediafire here: http://www.mediafire.com/?qbnu22y4sx7kf0n
I hope it works.
Wipe is easy with adb.
C:>adb reboot recovery
then waiting....waiting... waiting (it takes long times, also more than 10 minutes
If someone need F180K10H_00.kdz i can upload it. Tell me only where I can copy it....
You can get the KDZ from here: http://lg-phone-firmware.com/index.php?id_mod=20
LG Optimus G E971/3/5/7
benseoul said:
Hi I just found the baseband for all F180 models in a Vietnamese website, there is a file .bat to execute for all models.
Source:http://www.tinhte.vn/threads/optimu...p-root-recovery-up-rom-4-1-2-fix-loi.1816719/
I droped the file on mediafire here: http://www.mediafire.com/?qbnu22y4sx7kf0n
I hope it works.
Click to expand...
Click to collapse
Nice brother! We'll try and see if it works!
michaelgeorge said:
Nice brother! We'll try and see if it works!
Click to expand...
Click to collapse
little tutorial:
1: You need rooted phone
2: USB debugging actived
3: Copy "firmware_f180k.img" in your internal storage
4: Connect your phone in LG software
5: In your PC launche "Flash Baseband - F180K.bat" and press enter
6: Accept the root permission in your phone
7: Press enter again and the phone restart...
I tried and it works very well
benseoul said:
little tutorial:
1: You need rooted phone
2: USB debugging actived
3: Copy "firmware_f180k.img" in your internal storage
4: Connect your phone in LG software
5: In your PC launche "Flash Baseband - F180K.bat" and press enter
6: Accept the root permission in your phone
7: Press enter again and the phone restart...
I tried and it works very well
Click to expand...
Click to collapse
Yeah I tried it already but it's not working. Probably I need to erase everything first, CACHE and SYSTEM. How do I get to fastboot mode on the phone? Pressing Volume down + power only brings me to Factory Reset Mode.
michaelgeorge said:
Yeah I tried it already but it's not working. Probably I need to erase everything first, CACHE and SYSTEM. How do I get to fastboot mode on the phone? Pressing Volume down + power only brings me to Factory Reset Mode.
Click to expand...
Click to collapse
Do an Factory Reset, it's goog for clean your firmware, so after root again your phone and following the steps I indicates
Tried almost every option and still optimistic
benseoul said:
Do an Factory Reset, it's goog for clean your firmware, so after root again your phone and following the steps I indicates
Click to expand...
Click to collapse
Yeah I tried everything man, still not working. Hehe! I think I really need to clear my cache and system data before I flash new KDZ.
pgdg71 said:
Wipe is easy with adb.
C:>adb reboot recovery
then waiting....waiting... waiting (it takes long times, also more than 10 minutes
If someone need F180K10H_00.kdz i can upload it. Tell me only where I can copy it....
Click to expand...
Click to collapse
Yes bro, I think I need the ICS kdz first so that I can unlock my bootloader using the freegee. I can't unlock it using the freegee-beta for JB. I already tried the adb reboot recovery, factory reset, still nothing. Appreciate it bro if you can upload it.
I just convert my F180K to E975 EU , rooted the phone and flash the baseband , all is OK :good:
I need f180K10H ICS
pgdg71 said:
Wipe is easy with adb.
C:>adb reboot recovery
then waiting....waiting... waiting (it takes long times, also more than 10 minutes
If someone need F180K10H_00.kdz i can upload it. Tell me only where I can copy it....
Click to expand...
Click to collapse
Yes man, I badly need it. Can you upload it for me since it's not available anymore from LG.
F180K
Hi,
benseoul, did you try LTE baseband? Can enyone call to you? I have Korean JB and when I,m logged to LTE, some calls to me are dropped.
Is WCDMA 900 baseband enabled? (don't know is it possible...)
And last: can u tell me what type of firmware did You flash and how? I tried to follow topic:
http://forum.xda-developers.com/showthread.php?t=1060121
but I have "extracting error" and my phone is in "Installer mode" (via USB) only for a short moment and it's switching itself into "LG software"
hi there,
can anyone upgrade the F180K20G please?
in the firmware list posted before, that link is forbidden for some reason n I can't download it.
Help me guys
Hi. I am also having the same problem. I tried everything in here, but the network is still down. And in the lockscreen, it says "service disabled" in the network/usim protion. Please help me guys!
Hi bro.. im planning to convert my f180k to e975...
whats you current build number and android version before you started the conversion from f180k to e975? TIA
benseoul said:
I just convert my F180K to E975 EU , rooted the phone and flash the baseband , all is OK :good:
Click to expand...
Click to collapse
I successfully converted international versioon but Wifi not working ? any idea ?
neversomeday said:
I successfully converted international versioon but Wifi not working ? any idea ?
Click to expand...
Click to collapse
Same issuse, tried differend baseband`s, no luck...:crying:
[email protected] said:
Same issuse, tried differend baseband`s, no luck...:crying:
Click to expand...
Click to collapse
Wi-Fi works untill original baseband flashed-back.
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img ,
{{{ bootloader "NO NEED" This Work Before Just Because v48 and v56 have the same bootloader version }}} , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
EDIT HELLO
Things Have Changed Dont Try To Downgrade Bootloader or The Phone Will Get Hard Bricked , Why well bootloader versions on new firmwares have been upgraded please check all the information on the Bootloader/Fastboot
MODE Of The Phone Which Version You Have , Now For Example If You Are On Version NCQS26.69-64-5 you will need SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml full package then extract and now you will need SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml extract it too , Now Just Move The 2 Oems Images And 4 System Images And Boot Image To SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml Folder Next Look for RSD_Lite_Motorola_XML_To_Batch_Script on Google Download it And Watch The Video Of Rootjunky on how to use it. Very Simple Wish All Of You Luck And im Not Responsible Of Any Damage Of Your Phone Use This Guide On Your Own Terms.
ozmage said:
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img , bootloader , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
Click to expand...
Click to collapse
I flashed the Sprint firmware and had data working on my XT1766 after it got it's carrier update, the Sprint firmware does not soft brick the phone as I flashed it and can confirm it doesn't soft brick it, so you are incorrect in saying that.
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
dlinderaz said:
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
Click to expand...
Click to collapse
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
madbat99 said:
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
Click to expand...
Click to collapse
I restored the entire thing after flashed the indicated files causing the error message.
dlinderaz said:
I restored the entire thing after flashed the indicated files causing the error message.
Click to expand...
Click to collapse
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
madbat99 said:
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
Click to expand...
Click to collapse
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
dlinderaz said:
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
Click to expand...
Click to collapse
Keep in mind I have the virgin mobile version (sprint xt1766). Don't know which one you have. Some have had trouble with rsdlite on Windows 10, it worked fine for me though.
I used rsdlite from here
The newest one, 6.2.4 I think
Apn Xt1766
I just want to add apn and want to use hot spot again
As the phone is updated on latest build ..
I don't want the root access..
What's should I try then from previous build , can anyone
Guide me easy steps plz.
Xt1766 how to get working apn
Will anyone confirm
danishamini.saifi said:
Will anyone confirm
Click to expand...
Click to collapse
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
madbat99 said:
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
Click to expand...
Click to collapse
Thanks, ill try and share the result.
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
danishamini.saifi said:
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
Click to expand...
Click to collapse
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
madbat99 said:
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
Click to expand...
Click to collapse
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
danishamini.saifi said:
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
Click to expand...
Click to collapse
N/A will be there. But you can flash a new boot logo to kinda hide it. Instead of a black screen, any logo you want, maybe with a white strip at the top to hide it. I'll get you a link.
Here are some good ones. https://forum.xda-developers.com/mo...om-boot-logos-converted-t3759320/post75787882
And here is the guide to make your own
https://forum.xda-developers.com/moto-e4/how-to/replace-n-boot-image-t3687212/post74118155
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
danishamini.saifi said:
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
Click to expand...
Click to collapse
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
madbat99 said:
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
Click to expand...
Click to collapse
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
dlinderaz said:
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
Click to expand...
Click to collapse
Ota updates will likely always fail if you have twrp, or have modified the system in any way. The ota performs many checks (assert props) to see if the system is clean. If any asserts fail, the ota will fail. Even restoring the stock recovery doesn't guarantee the ota will work.
I had this issue last night so thought id save people some trouble and share the the file needed incase you need to flash over 20D's KDZ file either to go back or forward.
Please unzip and put in C:\Program Files (x86)\LG Electronics\LGUP\model\common
Works with LGUP 1.14
Whiskeyomega said:
I had this issue last night so thought id save people some trouble and share the the file needed incase you need to flash over 20D's KDZ file either to go back or forward.
Please unzip and put in C:\Program Files (x86)\LG Electronics\LGUP\model\common
Works with LGUP 1.4
Click to expand...
Click to collapse
Do you happen to have a link to LGUP 1.4? I can only find 1.14.3.
Thanks
Interesting. Looks like they updated the KDZ format again.
*Sigh*
-- Brian
dvgb173 said:
Do you happen to have a link to LGUP 1.4? I can only find 1.14.3.
Thanks
Click to expand...
Click to collapse
sorry i meant 1.14 just missed a 1 out.
dvgb173 said:
Do you happen to have a link to LGUP 1.4? I can only find 1.14.3.
Thanks
Click to expand...
Click to collapse
1.14 is the latest. I found some other typos in other LG threads also calling it "1.4".
Sent via open market LG US998 V30/V30+
Damn.
I had it working with 1.14, but I thought I had the wrong version. So I uninstalled it.
Now I can't get it to load - wrong dll for VS99620a.
Plus I wanted the developer version of LGUP.
Pretty sure I need the Partition option to flash other-model KDZ.
Hi there,
I need some help because i fell so stupid.... I cannot use the patched DLL for uppercut in order to flash the newest Oreo KDZ for H930...
I installed LGUP 1.14, USB DRiervs, etc... Download and uncompress uppercut 1.0.0.0. I downloaded the patched DLL 1.0.31.9. Even if I copy that dll on the uppercut folder or wherever i copy, the version shown on LGUP is always the 1.0.28.9... SO I cannot flash the latest Oreo KDZ
Help please?
thx in advance
you have to run lgup.exe not uppercut shortcut.
Dizzyrul3z said:
you have to run lgup.exe not uppercut shortcut.
Click to expand...
Click to collapse
****...!!! You're right...
I didn't create the common folder. I thought yes, but no...
Thx a lot!!!!
wont let me create common folder after created disapears
suckme69 said:
wont let me create common folder after created disapears
Click to expand...
Click to collapse
Check permissions. It was my previous fault
kherio said:
Check permissions. It was my previous fault
Click to expand...
Click to collapse
My bad my folders in setting was hidden
Hi, has anyone been able to revert back to N from O, please? I upgraded my H930DS (Hong Kong) to the Open Euro 20d ROM, but haven't been able to go back to N using either the patched LGUP or UPPERCUT (… I'm not happy with the limitation on the use of the dual SIM). With the phone in download mode, the error I get is "DLL for H93020d is invalid. Please install valid DLL package(*.msi) for the model". I get the same message if I try both methods with the phone in its normal operating mode. Thanks for any help.
peterjcar said:
Hi, has anyone been able to revert back to N from O, please?
Click to expand...
Click to collapse
Yes. I saw a report yesterday of someone who had downgraded. Just flash the KDZ:
autoprime said:
to downgrade just use the new oreo lgup_common.dll and you should be able to flash previous N KDZs again in LGUP.
Click to expand...
Click to collapse
peterjcar said:
Hi, has anyone been able to revert back to N from O, please? I upgraded my H930DS (Hong Kong) to the Open Euro 20d ROM, but haven't been able to go back to N using either the patched LGUP or UPPERCUT (… I'm not happy with the limitation on the use of the dual SIM). With the phone in download mode, the error I get is "DLL for H93020d is invalid. Please install valid DLL package(*.msi) for the model". I get the same message if I try both methods with the phone in its normal operating mode. Thanks for any help.
Click to expand...
Click to collapse
hi, I am using H930DS (Hong Kong) too.
Could you please tell me how flash the Open Euro 20d ROM?
Thanks!!!
kimball said:
hi, I am using H930DS (Hong Kong) too.
Could you please tell me how flash the Open Euro 20d ROM?
Thanks!!!
Click to expand...
Click to collapse
ROM or the KDZ? You probably mean the stock open European KDZ.
For the KDZ, go to the thread. Instructions are there.
https://forum.xda-developers.com/showthread.php?t=3779076
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Yes. I saw a report yesterday of someone who had downgraded. Just flash the KDZ:
Click to expand...
Click to collapse
Thanks, but I think the operative word in that quote is "should". I've tried that method with the phone in download mode and with it in its normal operating mode, but LGUP no longer recognises my phone model. I can get the LGUP pop-up with the serial port but the pop-up shows the phone as an unknown model, which I guess is the issue preventing the firmware update.
The version of LGUP_common.dll that I'm using is 1.0.35.3, which should be the latest. Its digital signature is dated Tuesday, 19 December 2017 3:33:29 PM. Its MD5# is c3df15812c1294028bfd330eb725519b.
i doesn't work for me on my ls998 v30+ sprint. do i need to make new folder (common) in the model folder? i tried with and without...
Looks like there's no going back...
peterjcar said:
Thanks, but I think the operative word in that quote is "should". I've tried that method with the phone in download mode and with it in its normal operating mode, but LGUP no longer recognises my phone model. I can get the LGUP pop-up with the serial port but the pop-up shows the phone as an unknown model, which I guess is the issue preventing the firmware update.
The version of LGUP_common.dll that I'm using is 1.0.35.3, which should be the latest. Its digital signature is dated Tuesday, 19 December 2017 3:33:29 PM. Its MD5# is c3df15812c1294028bfd330eb725519b.
Click to expand...
Click to collapse
Here is the reply I received from LG about reverting to Nougat (I asked them to do it for a fee):
"Dear Peter,
Thank you for contacting LG Customer Support. I apologise, but please be advised that we cannot put back your the previous software of your phone.
We suggest that you perform Factory Reset to your phone. This will not restore its previous software, but can fix issues of your phone. However, this will delete everything saved in your phone memory. You may back up first your files.
To reset:
Go to Settings
Select Backup & Reset
Select Factory Data Reset
If the issue will still continue, please let us know so we can assist you further.
Thank you. Have a great day ahead.
If you have any further questions or concerns, you can click on the link below to respond via email.
To help improve our Quality of Service, w e would appreciate it if you could complete our Customer Service Survey using the Survey link below.
Yours Sincerely,
Allen B.
Customer Care Representative
LG Electronics Australia & New Zealand"
… However, I was able to flash my LGH930DS to Oreo for the LGH930DS using LG Bridge after a few attempts (I couldn't get UPPERCUT to revert my phone to Nougat), resolving my issue with using the dual-SIM with the cross-flashed firmware and thus obviating my need to revert to Nougat.
Looking for some guidance please & thanks.
I have a H933, converted using the Frankenstein method to a US998. Then Unlocked BL, TWRP and rooted. Upgraded to US99820d
I would now like to flash back to stock H933. I have installed the Patched version of LGUP. I have extracted the DLL here into a common folder inside the model folder. I put the phone in Download mode, plug it in and then launch LGUP (patched). it finds the device but then errors saying the DLL is not valid for US98820d and to get a compatible DLL.
Please can someone help me with their full firmware backup so I could restore mine. I mistakenly wiped both slot A / B and now my phone won't boot up. I just bought the phone and to my surprise AT & T doesn't work in Europe.
blumix said:
Please can someone help me with their full firmware backup so I could restore mine. I mistakenly wiped both slot A / B and now my phone won't boot up. I just bought the phone and to my surprise AT & T doesn't work in Europe.
Click to expand...
Click to collapse
I too would like those files
@blumix @Ratty696 did you have any luck finding these? I need them as well.
No not yet. I am considering buying another second hand just to get them
gunnerone007 said:
@blumix @Ratty696 did you have any luck finding these? I need them as well.
Click to expand...
Click to collapse
Not yet
gunnerone007 said:
@blumix @Ratty696 did you have any luck finding these? I need them as well.
Click to expand...
Click to collapse
No still hoping someone would upload it.
Guys just crossflash with lgup, somewhere on XDA are instructions. Then at least the phone would be working.
It won't work I have tried it except you know another way. It's lock to AT&T America.
Hi I came by this post about an LG g8 att model. So I have such model and going to wipe it and flash a custom rom on it.
Perhaps before I do that I can put the original file here. Can someone guide me and point me to the proper page to do this?
BR
Deveric86 said:
Hi I came by this post about an LG g8 att model. So I have such model and going to wipe it and flash a custom rom on it.
Perhaps before I do that I can put the original file here. Can someone guide me and point me to the proper page to do this?
BR
Click to expand...
Click to collapse
Thanks, Deveric86 that would be really great. At the moment I am looking for the information you want.
Deveric86 said:
Hi I came by this post about an LG g8 att model. So I have such model and going to wipe it and flash a custom rom on it.
Perhaps before I do that I can put the original file here. Can someone guide me and point me to the proper page to do this?
BR
Click to expand...
Click to collapse
Hi! Below is the link, I found for now. Thanks again for your help.
ATT G8x Firmware Dumps
As the title implies , this thread will contain g8x att firmware backs ups for people to use, since we don't have kdz for our version of the g8x, these backups will hopefully help people recover phones. If you have a backup please pm me or post...
forum.xda-developers.com
Deveric86 said:
Hi I came by this post about an LG g8 att model. So I have such model and going to wipe it and flash a custom rom on it.
Perhaps before I do that I can put the original file here. Can someone guide me and point me to the proper page to do this?
BR
Click to expand...
Click to collapse
This link here says it could be down using the TWRP:
Lg G8 TWRP and backup for sprint
TWRP installation: There should be magisk and an unlocked bootloader. Installation instructions in the archive Backup for Sprint: Unpack archive, restore, make wipe data https://mega.nz/file/lPJyGRKT#AL7bS5g1noVREgvJnCQMI4tJFIYBO7Q6gLO13OCR7J4
forum.xda-developers.com
Deveric86 said:
Hi I came by this post about an LG g8 att model. So I have such model and going to wipe it and flash a custom rom on it.
Perhaps before I do that I can put the original file here. Can someone guide me and point me to the proper page to do this?
BR
Click to expand...
Click to collapse
Hi Deveric86, I think this is the link you are looking for :
[Tutorial] Full Flash Backup And Restore
This tutorial shows how to make a full backup of the phone flash and how to restore it. Codes fit LG G8 which with some minor modifications they can be used for any other Qualcomm based devices. If you provide me the "PartitionsList.xml" of other...
forum.xda-developers.com
Another utility to use for backup and flashing back would be the bkerler edl python utilities.
Search for it and you'll find his github page, and on it, he even provides a bootable image you can flash to a usb drive, boot it and it's ubuntu with all the utilities and all dependencies resolved.
I've used them many times and it's the first thing I do is use them to backup original rom on the device. Sorry, don't have at&t, just sprint.
Keep in mind there are some partitions you NEVER want to flash from someones backup, they contain imei and s/n.
AsItLies said:
Another utility to use for backup and flashing back would be the bkerler edl python utilities.
Search for it and you'll find his github page, and on it, he even provides a bootable image you can flash to a usb drive, boot it and it's ubuntu with all the utilities and all dependencies resolved.
I've used them many times and it's the first thing I do is use them to backup original rom on the device. Sorry, don't have at&t, just sprint.
Keep in mind there are some partitions you NEVER want to flash from someones backup, they contain imei and s/n.
Click to expand...
Click to collapse
Please do you know the names of the partition files that contains those things?
blumix said:
Please do you know the names of the partition files that contains those things?
Click to expand...
Click to collapse
ftm, fsg, fsc, modemst1 and modemst2
AsItLies said:
ftm, fsg, fsc, modemst1 and modemst2
Click to expand...
Click to collapse
Thanks AsltLies.
Does anyone have firmware for ATT G8?
So I tried many ways, as an unexperieced rom flasher, and so far had no luck.
The LG G8 ATT phone doenst even want to boot into recovery mode.
Also connected to a PC via USB and entered some commands via ADB tools and even then it will just reboot the phone.
Anyone got a clue what I am doing wrong?
I have AT&T LG G8 (LM-G820) and here are boot_a/b files that I've saved before flashing my phone with Lineageos download
vrolok_us said:
I have AT&T LG G8 (LM-G820) and here are boot_a/b files that I've saved before flashing my phone with Lineageos download
Click to expand...
Click to collapse
Do you have the abl_a and abl_b files too? Could you please share those?
Hello guys, so after spending a lot of time doing research on which partitions to extract to flash. I found out that the partitions on the link did the trick. I have 2 Sprint V50 same model one is rooted, the other is not, made the backup with Qfil from the non rooted and flashed those onto the rooted, that did the trick. Only use Qfil to flash partitions, do not use TWRP, it'll fail and your data will be erased to get it to work again!
The files are the one's I used, so I upload those to you guys! Hope it helps someone, if you have a doubt, just ask I'll be happy to help.
When I have some time I'll try to make a guide of it. If a new update arrives I'll update this post with the new files!
PARTITIONS 20N - Google Drive
drive.google.com
thx bro.
Strange I've never had any issue with flashing these in TWRP as long as I clear data/userdata. Then again I prefer starting fresh on a new OTA.
Thanks
Am I supposed to flash these files on just slot b or both slots
Merlve said:
Am I supposed to flash these files on just slot b or both slots
Click to expand...
Click to collapse
these are to be flashed on your current slot.. so A if you're on A
THANK YOU!
cloud1250000 said:
these are to be flashed on your current slot.. so A if you're on A
Click to expand...
Click to collapse
How can this be viewed on the phone?
i flashed these, but when i reboot to system it gets stuck on the lg logo. any idea?
1maaax said:
i flashed these, but when i reboot to system it gets stuck on the lg logo. any idea?
Click to expand...
Click to collapse
Did you ever figure this out? I can't seem to gain root anymore with magisk flashed images... the system sticks at the lg logo... once I restore boot_a it boots fine
q-killer said:
Did you ever figure this out? I can't seem to gain root anymore with magisk flashed images... the system sticks at the lg logo... once I restore boot_a it boots fine
Click to expand...
Click to collapse
I've never figured it out, sorry
1maaax said:
I've never figured it out, sorry
Click to expand...
Click to collapse
I just got mine fixed by remote unlock service in Ukraine in v50 telegram channel.... He only has internet on tues-wed but its a reasonable $28 to restore this device. Good luck
q-killer said:
I just got mine fixed by remote unlock service in Ukraine in v50 telegram channel.... He only has internet on tues-wed but its a reasonable $28 to restore this device. Good luck
Click to expand...
Click to collapse
I just flashed kdz with lgup to restore original firmware, in case it happens to you again
1maaax said:
I just flashed kdz with lgup to restore original firmware, in case it happens to you again
Click to expand...
Click to collapse
1maaax said:
I just flashed kdz with lgup to restore original firmware, in case it happens to you again
Click to expand...
Click to collapse
But... My phone won't go into download mode any longer. It did prior to the restore service. Also, I was not able to locate a kdz image for this phone.... Only the international version. Any ideas on how to restore download mode and flash a custom rom?
q-killer said:
But... My phone won't go into download mode any longer. It did prior to the restore service. Also, I was not able to locate a kdz image for this phone.... Only the international version. Any ideas on how to restore download mode and flash a custom rom?
Click to expand...
Click to collapse
What happens when you try to boot download mode? I'm not sure which kdz you are looking for. If it is sprint, I recommend looking for the v50 sprint backup files shared on xda. It isn't kdz, but result should be more or less the same.
Since the original link is dead, I've mirrored the files in case anyone needs them:
V450PM20n
C D said:
Since the original link is dead, I've mirrored the files in case anyone needs them:
V450PM20n
Click to expand...
Click to collapse
THX a lot, btw, is your V50 Still working on t-mobile?
rrhhuutt said:
THX a lot, btw, is your V50 Still working on t-mobile?
Click to expand...
Click to collapse
Nowadays, I can only connect via Wi-Fi calling while the cellular connection no longer works, so I'm guessing that T-Mobile is doing some IMEI-based blocking on their end.
Hrhigher said:
Hello guys, so after spending a lot of time doing research on which partitions to extract to flash. I found out that the partitions on the link did the trick. I have 2 Sprint V50 same model one is rooted, the other is not, made the backup with Qfil from the non rooted and flashed those onto the rooted, that did the trick. Only use Qfil to flash partitions, do not use TWRP, it'll fail and your data will be erased to get it to work again!
The files are the one's I used, so I upload those to you guys! Hope it helps someone, if you have a doubt, just ask I'll be happy to help.
When I have some time I'll try to make a guide of it. If a new update arrives I'll update this post with the new files!
PARTITIONS 20N - Google Drive
drive.google.com
Click to expand...
Click to collapse
Hrhigher said:
Hello guys, so after spending a lot of time doing research on which partitions to extract to flash. I found out that the partitions on the link did the trick. I have 2 Sprint V50 same model one is rooted, the other is not, made the backup with Qfil from the non rooted and flashed those onto the rooted, that did the trick. Only use Qfil to flash partitions, do not use TWRP, it'll fail and your data will be erased to get it to work again!
The files are the one's I used, so I upload those to you guys! Hope it helps someone, if you have a doubt, just ask I'll be happy to help.
When I have some time I'll try to make a guide of it. If a new update arrives I'll update this post with the new files!
PARTITIONS 20N - Google Drive
drive.google.com
Click to expand...
Click to collapse
My friend ask me to changer firmware lg v450 to v500 but messed up some files and now phone is just showing logo and i didn't find stock firmware could you please re-upload your rom
i need your help