Related
So, basically, I've done a stupid thing, I attempted to install Cyanogen, forgetting to enable USB debugging, and it didn't go too well, all I can do now is use Clockwork Recovery as there is no ROM on the phone, I'm not sure if there's anyway I can enable USB debugging and flash it via USB, with Odin, but whenever I try to flash via .zip through Clockworkmod Recovery I either get the status 7 error, or if I take steps to get rid of that the installation just aborts, any ideas on what I can do?
There is also a possiblity I installed Clockwork Recovery for the 3G edition, whereas I have the LTE edition of the phone, I'm not sure if that'll have contributed to the downfall of my smartphone adventures
Any suggestions would be greatly appreciated!
Tobiscuits said:
So, basically, I've done a stupid thing, I attempted to install Cyanogen, forgetting to enable USB debugging, and it didn't go too well, all I can do now is use Clockwork Recovery as there is no ROM on the phone, I'm not sure if there's anyway I can enable USB debugging and flash it via USB, with Odin, but whenever I try to flash via .zip through Clockworkmod Recovery I either get the status 7 error, or if I take steps to get rid of that the installation just aborts, any ideas on what I can do?
There is also a possiblity I installed Clockwork Recovery for the 3G edition, whereas I have the LTE edition of the phone, I'm not sure if that'll have contributed to the downfall of my smartphone adventures
Any suggestions would be greatly appreciated!
Click to expand...
Click to collapse
hi,
first of all, dont worry for that. its not really a brick.
reboot your device to download mode (press vol-down, home and power buttons)
install philz_touch_5.18.2-i9195.tar.md5 - 7.08 MB via odin and restart to your phone to philz recovery. (press vol-up, home and power button, if you see samsung logo release power button)
then install cm rom and reboot. if you dont have any rom file in your storage, then copy rom zip file to your external sdcard via your pc and put external card again to your phone and reboot recovery and try install your rom from external card. this recovery is for lte variant of s4 mini.
i hope you get your phone working again and tell me if it works
I can't use Odin to detect my phone, it just doesn't show up :c
There is another solution.
first - get philz recovery zip file for lte variant and extract it. (get it here http://d-h.st/qdn) open updater-script and remove this code and save file.(that installer will not stop because your device is show him you have 3g variant but you have lte one so simply remove this code and save file to your zip)
assert(getprop("ro.product.device") == "serranolte"
|| getprop("ro.build.product") == "serranolte");
make zip file and copy it to your sdk folder and install it via adb sideload. (google it when you dont know how to install with sideload)
after this you should have right recovery.
then install your rom with sideload and reboot.
Yeah, that did fix it, I now however have the issue of my Wifi won't turn on and I cannot install things as it states that there isn't enough storage space available, which there is, there is also 4.62 Gb used in my Misc files and nothing is listed as even close to that size, so my phone isn't particularly better off ¬.¬ But thanks for your help
Got all of the problems sorted now, for the storage space thing, I had to remove my external SD card and just go on a formatting blitz after reinstalling Clockworkmod and the wifi required a modded kernel to be installed
Hi can someone help me, I have the same issue as Tobiscuits. The link no longer worked but I managed to get the file needed for recovery Odin doesn't see my phone so I can't recover to stock that way I'm guessing USB debugging is off I'm stuck on the Odin mode screen everytime my phone starts. I'm new to this what do I do with the recovery zip I have, it's on my pc atm
Stevoo19 said:
Hi can someone help me, I have the same issue as Tobiscuits. The link no longer worked but I managed to get the file needed for recovery Odin doesn't see my phone so I can't recover to stock that way I'm guessing USB debugging is off I'm stuck on the Odin mode screen everytime my phone starts. I'm new to this what do I do with the recovery zip I have, it's on my pc atm
Click to expand...
Click to collapse
Have you installed latest Samsung drivers? Or try reinstall/update them, from Samsung website?
(in the past some people had to uninstall the Samsung sync software & it's drivers first if it had already been installed on PC, ie smartswitch/kies)
You must reboot PC between each operation above & check Samsung drivers uninstalled in program list (assuming Windows). Reboot after install as well.
Update to TWRP after fixed.
IronRoo said:
Have you installed latest Samsung drivers? Or try reinstall/update them, from Samsung website?
(in the past some people had to uninstall the Samsung sync software & it's drivers first if it had already been installed on PC, ie smartswitch/kies)
You must reboot PC between each operation above & check Samsung drivers uninstalled in program list (assuming Windows). Reboot after install as well.
Update to TWRP after fixed.
Click to expand...
Click to collapse
Hi thanks for replying, yes I installed Samsung usb drivers still doesn't recognise my device, I do have the same phone again and that works but that phone doesn't recognise on Odin or pc either maybe it's a cable issue or USB driver issue like you said. I'm pretty new to all this but TWRP is the recovery zip right? When I try factory reset it goes through the motions then nothing happens goes back to Odin mode automatically.i should mention I uninstalled magisk before my phone decided to not boot back up I'm guessing I uninstalled it wrong. I'll try uninstalling the Samsung drivers and reinstalling.
Hello there,
I have a problem with my samsung gio device. I decided to update the unofficial cyanogenmod, but the install interrupts and aborted.
Now I can boot until the Samsung logo came. An other Forum gave me the hint, that the devica has a softbrick.
They gave me also the hint to the following manual.
http://forum.xda-developers.com/showthread.php?t=1573628
I tried to do this manual, but I dont undersstand what to do in Point 3.
Could anyone help me and try out a step by step manual for me, that I can unbrick my Samsung mobile?
Thanks a lot! :fingers-crossed:
just flash a cwm 5.0.2.8 or a newer one because you use cyanomod rom use ext4 only
download one,put your phone in download mode power menu and volume down togetter.
connect phone with computer
start odin see that phone is recognised
insert the cwm clicking one package and put the package in odin(see odin how to)
flash...
devrieshh said:
just flash a cwm 5.0.2.8 or a newer one because you use cyanomod rom use ext4 only
download one,put your phone in download mode power menu and volume down togetter.
connect phone with computer
start odin see that phone is recognised
insert the cwm clicking one package and put the package in odin(see odin how to)
flash...
Click to expand...
Click to collapse
Hello,
I got the error, you could see on the attached picture.
Do you know why?
EDIT:
I tried rhe following instruction and it works until the reboot. The gio interrupt the rebbot. There is only the samsung logo shown.
see this link,you should insert the cwm as one package
also dont forget to insert the gio_v1.0. ops file(not cooper ofcourse )see example this file is in the odin 4. version if not in odin3
http://androidworld.nl/forum/samsun...to-one-package-firmware-flashen-via-odin.html
can u give downloaded cyogenmod package full name?
if cy7.x flash this cwm: px-cwm
if cy9.x flash this cwm: cwm6 itisichan
if cy10.x flash this cwm: ma6kernel cm10.1
and if not unbreak wipe data + format system + format dalvik
and flash another rom...
Hi everybody,
sorry for bothering you, but I think I might need some help.
I tried to flash ParanoidAndroid (first try ever to flash a smartphone) but failed 'somehow'.
Initial steps to create the problem
Initial Status: Gingerbread on a Galaxy W; Pretty old and pretty messed up
Download the update.zip to root the smartphone => Becoming root worked!
Download ParanoidAndroid
Download Clockwork Recovery
Created backups using Titanium Backup as root.
Copied ParanoidAndroid to the GalaxyWs internal sd card (yes, this was my mistake)
Wipe cach partition => It said, it worked, I don't know if it did
Rebooted phone => all fine
Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Status of the problem
Bootup shows Samsung Logo
Bootup than shows GalaxyW-Screen Logo
Bootup than shows the android recovery symbol OR directly reboots
When trying to open the recovery menu, every second time I get the message "Updating (...) Installing MultiCSC... Can't access /system/csc/DBT/system"
If opening recovery menu works, I can only acces the internal storage of the galaxy to install an update (tried the paranoidandroid several times, it doesn't work)
When plugging in the galaxy w to my USB port, I don't get an USB storage shown on my 2 laptops (1 "Windows 7", 1 "Ubuntu 14.0?" )
neither odin (4.43) nor Heimdall are able to flash any files.
So, simple question, what can I do next?
-I cannot copy clockworkmod to my smartphone
-I don't know if I can easily overwrite the kernel or the bootloader.
I searched the forum but didn't find a clear solution, so sorry if this special configuration was already asked.
Thanks for your help and best regards
FrankyDroid
FrankyDroid said:
[*]Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Click to expand...
Click to collapse
Your ROM's download has been cut either by a connection issue or by you, That is why I always have a backup rom in my SD Card. Also For kitkat, make sure you got CWM 6.0.4.5 or higher. Personally i use PhilZ Touch Recovery. It is simple enough for me. And odin recognizes your phone only in download mode. So make sure you go to download mode then plug the phone in. And also make sure while working with odin, unplug all USBs and other phones
Hey MayB4ck,
thank you for the tips, I finally got it running Using Philz Touch Recovery. Works like hell
Best regards
FrankyDroid
Hello everybody,
Here my problem :
I tried to install a custom rom, I failed. Now, my smartphone stay on the Asus logo screen. I tried to follow this - http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835 - to fix the problem, but when I connect phone and laptop, adb doesn't find the device.
If I continue and go in recovery mode (using TWRP), laptop can access the phone (I can see internal memory but not external).
And if I try the ADB sideload, there is no device again...
It's the first step, I don't see any other way to unbrick the phone...
Thanks in advance
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 be lucky your phone is recognized
Hello,
Frist, thank you for your answer. I had already tried this way but nothing. Finally, I fixed the problems (detect phone and unbrick phone).
1-In TWRP, I loaded recovery.img, boot.img and droidboot.img. Reboot in recovery mod, but I had the dead droid... so I pushed on power and volume up till I have a new screen.
2-In this part, I did a Wipe/Factory reset (useless I think), reboot in recovery mode (still dead droid). This time I selected the line "update with adb" (with an ASUS firmware). Then I had a message who told me update adb sideload. I did it and it installed the firmware. The smartphone reboot correctly.
Now, I have the same problem I had yesterday. In TWRP, my external storage isn't detected...
you use stock recovery or custom recovery, if you use stock recovery external-storage won't detected
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Edit : I guess custom, TWRP. It's why I don't understand why it doesn't allow me to mount SD card or doesn't detect this same SD Card.
Mara Udé said:
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Click to expand...
Click to collapse
i use twrp 3.0 too, but external sd detected. no need to put on external storage, you can flash Cm 13 through internal storage
if you want to install custom rom it's better if you make a backup first, so if happen you failed when installing new rom or maybe you don't like it (new rom) you can go back to stock rom through TWRP restore
Ok, failed again...
Try a different rom or redownload the rom it might have been a bad download.
The error message says there is no updater script in the zip meaning it can't install anything as the updater script tells what directories to install the files if I seen it correctly that is.
Sent from my ASUS_Z00AD using Tapatalk
Mara Udé said:
Ok, failed again...
Click to expand...
Click to collapse
maybe the CM 13 zip file you have download corrupted, try to re-download and re-flash it again. if still failed try another rom
( i'm using AICP Rom "based on CM 13 too") try it, it's awesome Rom ---> do clean install wipe all except internal storage and external storage
http://forum.xda-developers.com/zenfone2/development/rom-c-p-t3285951/post64645756#post64645756
http://opengapps.org/ ( select x86-6.0-nano )
Hi,
Sorry for this late answer. As I failed to install those roms (CM13, Bliss), I'm going to stop here and wait for the Marsmallow update. But I'm happy my phone isn't brik anymore.
Thank you all.
Hello,
i tryed to put the newsest Miui on my Redmi 1 via recovery mode. it stucked at 90 percent and crashed.
Now i cant boot anymore and also the computer does not recognize the Device anymore. THat means i cant put a new Update.zip on it.
I tryed to put the update.zip on sdcard and to install it via recovery mode but i am getting a erro that that the update.zip can't be found.
I downloaded following rom: en.miui.com/download-226.html
Is it possble to install from sdcard? where excatly do i have to place it then?
What options do i have ?
Thank you for helping. I m struggeling no for 2 days already...
Salujan
i think you got soft brick
download and install the mi flash http://xiaomitips.com/download/miui-rom-flashing-tool/
you can find the fastboot Rom (firmware) here http://en.miui.com/thread-21812-1-1.html
good luck
Hello,
i have tryed mi flsh already. maybe it was a wrong rom version. Now its working. Thank yu for your quick help!
Salujan