not working recovery - Lenovo Vibe K5 Plus Questions & Answers

guys, my lenovo vibe k5 plus got stuck on booting.its showing only lenovo logo.i tried to get into recovery mode , but nothing shows even i press vol up + power button.what should i do ? or can anyone explain what am i facing right now?

Nandu_K_S said:
guys, my lenovo vibe k5 plus got stuck on booting.its showing only lenovo logo.i tried to get into recovery mode , but nothing shows even i press vol up + power button.what should i do ? or can anyone explain what am i facing right now?
Click to expand...
Click to collapse
Are you sure you cannot enter the recovery? You should be able to do so if you have ended up in bootloop.

dedq said:
Are you sure you cannot enter the recovery? You should be able to do so if you have ended up in bootloop.
Click to expand...
Click to collapse
yes sir.i tried but not showing anything other than lenovo logo.And im sure about buttons that they are working properly.any solutions?

Not that I know of. You can maybe try booting to recovery over USB. Try searching for that on the XDA.

Related

[HELP][BRICKED]Stuck at the logo boot up screen!

i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
is b125 the newest one for the international version?
7OOKA said:
is b125 the newest one for the international version?
Click to expand...
Click to collapse
Yes, its latest.
Sent from my HUAWEI P6-U06 using xda app-developers app
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Does it everytime when you power up the phone? I sometimes had this issues, but then i turned the device off and on again and everything was fine
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
edit: i cant boot to recovery too (vol + and power button) it only reboots to the logo and stuck on that
7OOKA said:
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
Click to expand...
Click to collapse
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
husen4u said:
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
no luck
7OOKA said:
no luck
Click to expand...
Click to collapse
This is a longshot but since you dont have warranty you might give it a try.
Remove the back of the phone (there are tutorials on youtube for "disassembling ascend P6") and then remove the battery inside. Afterwards connect the phone to your ac charger, and retry to force update (power button while holding vol + and - buttons).
I really dont know if this works, but when i bricked my other huawei phone (u8800) where the battery was removable I managed to restore it using the aforementioned method..
Best of luck!
I had same problem last week, press volume up/down when phone boot. and keep pressing those buttons.
Dosnt work every time.. download firmware first and add it to external sd/dload folder..
i think i lost my stock recovery, i dont know why but i think that happened, but can anyone tell if the loss of the recovery will lead to the failure of force update? (in my case it won't start at all just stuck at logo)
if that happened i might try reflashing stock recovery with fastboot
ok i tried to flash stock recovery via fastboot, but the problem is my pc only reads my device when i connect it to it then hold power and vol - buttons till it reboots, then my pc reads it as an adb interface but it shows that it failed to install device drivers although i already installed the usb drivers and updated google usb drivers from android sdk, and everytime i try to flash recovery via adb (fastboot flash recovery recovery.img) it stuck with waiting for device
it seems its not recognized properly, am i hard bricked? :crying:
same problem with ascend mate
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
ens1986 said:
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
Click to expand...
Click to collapse
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Thanks
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
7OOKA said:
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Click to expand...
Click to collapse
ens1986 said:
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
Click to expand...
Click to collapse
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
7OOKA said:
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
Click to expand...
Click to collapse
ens1986 said:
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
Click to expand...
Click to collapse
not sure to be honest
823834511
Hey your file actually worked. Just tried couple of times and it worked.
Thanks a lot you are life saver
7OOKA said:
not sure to be honest
Click to expand...
Click to collapse

Black screen with red and blue flashing LED

Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
I need help as well
droids4lyfe99 said:
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
I tried to Flash twrp-2.8.0.0_d855-signed.img for TWRP Bootlader and got the same problem. Did i done some thing wrong pls I need an assist.
droids4lyfe99 said:
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
Worked for me also! I just exited the factory reset menu and it booted up normally! Thanks for the help!
you're skating on very thin ice if you are flashing anything to your device that is not specifically for that model..
Cant fix the issue
Hello, i rooted a LG G3 D855, lollipop, installed flashify and then flashed twrp (last version) now i cant enter into recovery mode (red blue led blinks) i tried the factory reset without any results.
thanks
Download mode?
freddyjgv said:
Hello, i rooted a LG G3 D855, lollipop, installed flashify and then flashed twrp (last version) now i cant enter into recovery mode (red blue led blinks) i tried the factory reset without any results.
thanks
Click to expand...
Click to collapse
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
lazzarusbr said:
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
Click to expand...
Click to collapse
didnt tried but i want to get into recovery mode so i can full backup and flash cloudyg3
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
any solution?
linux_svk said:
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
Click to expand...
Click to collapse
Did you fix the issue?
linux_svk said:
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
Click to expand...
Click to collapse
You can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
lazzarusbr said:
yoy can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
Click to expand...
Click to collapse
it doesnt matter if i already have my phone rooted and with the red blue led issue??? thx
okey so im gonna try this http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767
GUYS DO IT LIKE HERE http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
WORK PERFECT!!!
Hi,
droids4lyfe99 said:
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
Any solutions yet?
Thank You lazzarusbr!
You Sir saved me a lot of reading
This method helped me get out from the red-blue blinking, black screen Recovery ****up. I believe I got into it because I should have flashed the TWRP using KitKat, but my device came with Lollipop installed....
---------- Post added at 04:38 PM ---------- Previous post was at 04:34 PM ----------
You Sir saved me a lot of reading !
This method helped me get out from the red-blue blinking, black screen Recovery ****up. I believe I got into it because I should have flashed the TWRP using KitKat, but my device came with Lollipop installed....
Had the same problem few minutes ago, then I just hold power button to reset the phone and it worked but I dont know if TWRP is installed now..?
did you try factory mode..
lazzarusbr said:
You can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
Click to expand...
Click to collapse
This saved the day for me! Thank you so much!!!!!
freddyjgv said:
it doesnt matter if i already have my phone rooted and with the red blue led issue??? thx
Click to expand...
Click to collapse
Mate, thank you a lot, you just saved my life.
I can't even express how thankful I am because my device almost got bricked and you just saved me. Thanks a lot !
It means not fully load.
Try to install the AUTORECAR in the Play Store.
Lol. The same thing happened to me on LG-D855. I flashed the TWRP recovery zip and new my phone is literally unusable. It doesn't boot into recovery or into anything else. Sigh.

Cant boot into recovery mode

Hi,
I need some help.
So i rooted my D855 G3 using the avioch's 1 click method.
I then flashed the TWRP recovery image on the phone. Now every time i try to boot to recovery mode , my phone shows a "boot certification verify error" in the top left corner and then goes to a black screen with the LED flashing blue and red.
I am able to get back into my regular phone OS , so its not bricked. I have tried several methods of getting into recovery mode (apps, holding power + vol down, adb)
Please can someone help me with this , ive read soo many threads but cannot find a straight answer on how to get passed the error
Thanks
krishin316 said:
Hi,
I need some help.
So i rooted my D855 G3 using the avioch's 1 click method.
I then flashed the TWRP recovery image on the phone. Now every time i try to boot to recovery mode , my phone shows a "boot certification verify error" in the top left corner and then goes to a black screen with the LED flashing blue and red.
I am able to get back into my regular phone OS , so its not bricked. I have tried several methods of getting into recovery mode (apps, holding power + vol down, adb)
Please can someone help me with this , ive read soo many threads but cannot find a straight answer on how to get passed the error
Thanks
Click to expand...
Click to collapse
have you try autorec for g3 in playstore?! that app let you install the TWRP without problems...try it...go to playstore and search for it, its a must have!
copy2050 said:
have you try autorec for g3 in playstore?! that app let you install the TWRP without problems...try it...go to playstore and search for it, its a must have!
Click to expand...
Click to collapse
Yeah i have tried that app before i flashed twrp...
I'm having the same problem. UK G3 D855 running 5.0
krishin316 said:
Hi,
I need some help.
So i rooted my D855 G3 using the avioch's 1 click method.
I then flashed the TWRP recovery image on the phone. Now every time i try to boot to recovery mode , my phone shows a "boot certification verify error" in the top left corner and then goes to a black screen with the LED flashing blue and red.
I am able to get back into my regular phone OS , so its not bricked. I have tried several methods of getting into recovery mode (apps, holding power + vol down, adb)
Please can someone help me with this , ive read soo many threads but cannot find a straight answer on how to get passed the error
Thanks
Click to expand...
Click to collapse
Same problem here my friend D855 stock rom 20i
Install TWRP Manager from the Play Store, and see if it recognizes that TWRP is installed. If not, you can use the same app to install the latest version 2.8.7.0
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
krishin316 said:
Yeah i have tried that app before i flashed twrp...
Click to expand...
Click to collapse
If it didn't work then you are not on stock rom or you are not rooted (or don't have supersu app)

[Q] P2a42 keeps stuck on first bootlogo

My dear P2a42 keeps stock on the first boot-logo :crying:
I've already tries to recover boot and system with TWRP 3.0.3 and TWRP 3.0.3-3. Also tried to wipe the whole phone and reinstall the ROM (the modded newest stock ROM), this also didn't work.
Strange problem IMHO... What's the best way to completely reset the phone to stock, flashing it with fastboot?? Or is there a possible other solution?
Thanks in advance :good:
Have a nice day y'all.
ilmervanhattem said:
My dear P2a42 keeps stock on the first boot-logo :crying:
I've already tries to recover boot and system with TWRP 3.0.3 and TWRP 3.0.3-3. Also tried to wipe the whole phone and reinstall the ROM (the modded newest stock ROM), this also didn't work.
Strange problem IMHO... What's the best way to completely reset the phone to stock, flashing it with fastboot?? Or is there a possible other solution?
Thanks in advance :good:
Have a nice day y'all.
Click to expand...
Click to collapse
try this not sure if it will work for you
https://www.youtube.com/watch?v=ixnZMM5FRIs
abhayruparel said:
try this not sure if it will work for you
https://www.youtube.com/watch?v=ixnZMM5FRIs
Click to expand...
Click to collapse
Thank you, but I don't want to downgrade. Why should I.
Either way I'm not able to watch youtube here.
ilmervanhattem said:
Thank you, but I don't want to downgrade. Why should I.
Either way I'm not able to watch youtube here.
Click to expand...
Click to collapse
Actually in video it's fastboot method only i didn't read the article of yours properly.
Sent from my Lenovo P2 using Tapatalk
Lenovo p2a42 stuck on logo
Lenovo P2 is stuck in a boot loop.
I can't enter the recovery menu. If I press Volume up and power, it tries to start normally. If I press Volume Down and Up and Power, Phone enters "Bootmode is 'recovery'". After 14 seconds, it tries to restart in the normal startup.
If I press power + Volume Down, it enters a menu to swich between "Start", "Barcodes" and "Power Off". it shows dthe device parameters like serial number, storage, ram and the date of the installed software.
What can I do?
The only fix to get back into TWRP,
when the phone reboots, in the short moment of a blank screen you need to press Volume Up + Power.
The only catch is you have to press the Volume Up for a very short time.
It took me many attemps untill i got back into TWRP !!
Do not wipe anything or the phone boots again and you might get stuck in the same shizzle.
So install your favorite Rom & GApps and hopelly all works fine again.

Stuck on "powered by android logo" , PLEASE HELP

so i have an m30 , i flashed root successfully for the first time , then i decided to download a modded version of play store thats when my phone got stuck on the samsung logo , or whats called a boot loop , so i flashed a stock rom and it worked , i want to check if the oem unlock option in developer mode and it was there , i forget to check the usb debuging option so im not sure if its on or off , but i flashed root again and now im stuck on " SAMSUNG GALAXY M30
POWERED BY Android " logo , the phone just keeps restarting , rebooting not able to stop it or to boot to download mode , please please please help me
Manahzak said:
so i have an m30 , i flashed root successfully for the first time , then i decided to download a modded version of play store thats when my phone got stuck on the samsung logo , or whats called a boot loop , so i flashed a stock rom and it worked , i want to check if the oem unlock option in developer mode and it was there , i forget to check the usb debuging option so im not sure if its on or off , but i flashed root again and now im stuck on " SAMSUNG GALAXY M30
POWERED BY Android " logo , the phone just keeps restarting , rebooting not able to stop it or to boot to download mode , please please please help me
Click to expand...
Click to collapse
Does it have battery removal ?
DankMemz said:
Does it have battery removal ?
Click to expand...
Click to collapse
Nope
Manahzak said:
Nope
Click to expand...
Click to collapse
Then you're pretty much screwed
DankMemz said:
Then you're pretty much screwed
Click to expand...
Click to collapse
Give me some hope
Manahzak said:
Give me some hope
Click to expand...
Click to collapse
Dude, try holding volume down plus home button (if it has one) for 30 sec. If this doesn't work try holding volume up and home button (only if it has one).
DankMemz said:
Dude, try holding volume down plus home button (if it has one) for 30 sec. If this doesn't work try holding volume up and home button (only if it has one).
Click to expand...
Click to collapse
no it doesn't have a home button , and nothing will stop it , what i noticed tho that if i hold vol down and the power button the next time the logo will disappear way faster but only once each hold and ill get a delay of 2 seconds before that logo appearing again and the phone rebooting , its been literally 62 hours since it started doing this , it started with a battery fully charged meaning a 5000ma , about that delay i tried using it but nothing worked , i tried clicking vol up and power button which is supposed to put the phone in recovery mode but nothing happens , i went as far as spamming random buttons to holding them for more than a minute , nothing stops it
Manahzak said:
no it doesn't have a home button , and nothing will stop it , what i noticed tho that if i hold vol down and the power button the next time the logo will disappear way faster but only once each hold and ill get a delay of 2 seconds before that logo appearing again and the phone rebooting , its been literally 62 hours since it started doing this , it started with a battery fully charged meaning a 5000ma , about that delay i tried using it but nothing worked , i tried clicking vol up and power button which is supposed to put the phone in recovery mode but nothing happens , i went as far as spamming random buttons to holding them for more than a minute , nothing stops it
Click to expand...
Click to collapse
Then you hard bricked your device, sorry to tell you that. Take it to a service, and see if they can do anything to it, but you most surely bricked the hell out of your device, up to the point of no return.
DankMemz said:
Then you hard bricked your device, sorry to tell you that. Take it to a service, and see if they can do anything to it, but you most surely bricked the hell out of your device, up to the point of no return.
Click to expand...
Click to collapse
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
ashubais said:
if you want to boot into download mode try this:
When you see samsung logo immediately press volume up + down and while holding connect the phone to pc using type-c.
A warning screen will appear now press volume up button to boot into download mode.
Click to expand...
Click to collapse
thank youuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
i love u and i greatly apprecciate it
Manahzak said:
thank youuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
i love u and i greatly apprecciate it
Click to expand...
Click to collapse
I am glad that this worked for you and your welcome.
ashubais said:
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
Click to expand...
Click to collapse
My samsung M30S was stuck at boot screen for no reason and tried everything until I came upon your post and did as described. I was able to get into safe mode and reboot the phone. Thanks very much.
technofast said:
My samsung M30S was stuck at boot screen for no reason and tried everything until I came upon your post and did as described. I was able to get into safe mode and reboot the phone. Thanks very much.
Click to expand...
Click to collapse
Great. Good to hear that it worked for you.
ashubais said:
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
Click to expand...
Click to collapse
Download mode not open for me :crying: :crying: :crying:
If you are stuck on Samsung Logo, connect to PC and press Vol Down + Power for 7 seconds. It will go to charge mode. Disconnect from PC and it will power off automatically. After that press Volume Up + Down and connect to PC while holding and you will enter download mode. It will ask for confirmation.
Useful. Works
ashubais said:
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
Click to expand...
Click to collapse
Thank you for this post. I did this and my phone booted to TWRP. (I was flashing TWRP when I encountered the bootloop)
After booting to TWRP, I did an advanced wipe (I left System unchecked). After the wipe, the phone booted normally.
verisence said:
Thank you for this post. I did this and my phone booted to TWRP. (I was flashing TWRP when I encountered the bootloop)
After booting to TWRP, I did an advanced wipe (I left System unchecked). After the wipe, the phone booted normally.
Click to expand...
Click to collapse
TWRP on M305F, Android 10?
vdbhb59 said:
TWRP on M305F, Android 10?
Click to expand...
Click to collapse
Mine is M307FN, android 10
verisence said:
Mine is M307FN, android 10
Click to expand...
Click to collapse
Cool. TWRP for Android 10 came for M305F, and I am on GSI now.

Categories

Resources