I was on ViperX 3.2 this morning and I got the OTA update message, so I downloaded and installed 3.2.1, 3.2.2, 3.2.3 in succession. Problem occurred when I got the 4th message. Selected install now. Aroma installer said it was flashing ViperX 3.2.1. Rebooted and got the same 3.2.4 update available message. I check system and apparently it didn't update. So I try installing the zip from ROM manager manually, that didn't work, installs 3.2.1 again. Tried booting into recovery, installs 3.2.1 without even going to recov. (I just get the Team Win window and then couple of lines of md5 checksum not found, etc and then straight to aroma) Went to the bootloader, flashed TWRP again, booted into recov again and same thing. What's going on here? Anyone else facing this issue? Can't seem to find anything online.
When you installed an ota you have to delete it from the download folder on the sdcard
Mr Hofs said:
When you installed an ota you have to delete it from the download folder on the sdcard
Click to expand...
Click to collapse
Aff, didn't know that. Thanks!
Hi all, I have just recently purchased a new OnePlus 3 from one of the distributors listed under OnePlus's website. I've been waiting for the 3.2.1 OTA update for a while and its finally in my region. However after it finishes downloading and I press install, the phone reboots and after a while it would appear a screen which says "Installation Failed" with nothing else but a Reboot button. Can anyone shed any light on this potential problem or is it isolated to just my device? Is it possible for me to completely reinstall OxygenOS on the phone again? (wipe the phone and reinstall android + oxygen's). Also when I bought the device and first booted it, I noticed that there was some apps already installed( apart from stock google ones). These looked like malware to me and it doesn't allow me to uninstall them(from app drawer or from settings), is there anyway i can uninstall them as well?
Thanks in advance
I see no one replied to this topic, sadly. I am experiencing exact the same issue. Currenty I am on OxygenOS 3.1.3. When I go to system updates it says OxygenOS 3.2.6 is ready to download. I hit download, it downloads, reboots but then it says the update failed and I can only reboot.
Anyone knows a solution? Would be nice if I could update my phone
if your bootloader is locked and you dont want to unlock it, then you can download the full rom from oneplus's official website and sideload through command prompt. instructions are available there on their website.
If your bootloader is unlocked and you have latest twrp, just use the below link to download the full rom and flash it via twrp.
if you want to do a clean install with twrp go to wipe the select everything and wipe. this will delete everything on your phone including the os. remain in twrp and connect your phone to your pc and copy paste the rom in twrp folder in your phone and flash it.
https://www.androidfilehost.com/?fid=457095661767098500
My oneplus 3, 3.2.8 ota will not update and fails. Device was rooted but is now unrooted w/ stock 3.2.7 w/ twrp recovery. I also flashed back stock recovery and still the ota fails to install. Any idea how to fix this or why it is happening? Bootloader is unlocked as well.
jamjr74 said:
My oneplus 3, 3.2.8 ota will not update and fails. Device was rooted but is now unrooted w/ stock 3.2.7 w/ twrp recovery. I also flashed back stock recovery and still the ota fails to install. Any idea how to fix this or why it is happening? Bootloader is unlocked as well.
Click to expand...
Click to collapse
Try using moded twrp from this post http://forum.xda-developers.com/oneplus-3/how-to/guide-how-to-flash-3-5-4-cb-breaking-t3482572
Installed trwp and flashed multiple times my wileyfox swift to lineage 14.1
Swift wont boot gets stuck in bootloader....
Found a 14.0 image (linage) somewhere.... this works with no problems but seems an older built (buggy)
Anyone has 14.1 lineage on a swift with no problems ???
You can try installing Lineage 14.1. from CM13, see posts #155/#156 in thread 'Nightly 14.1 lineageOS Rom For Crackling'
went back to cyanogen the original firmware
Found the original firmware and twrp flashed back to that one...
https://forum.xda-developers.com/showpost.php?p=70510585&postcount=19
Old firmware but was happy with that one so.... problem solved....
Same bootloop on Wileyfox Swift, how did you...
...install the old COS on your Swift?
I downloaded all the files from G4liant's MEGA cloud storage but don't know how to continue.
Please, help if you can (see my reply to his post, too (as of today 25. June 2017)).
Thanks!
jwalesch
__________________________________________________________________________
eskodisk said:
Found the original firmware and twrp flashed back to that one...
https://forum.xda-developers.com/showpost.php?p=70510585&postcount=19
Old firmware but was happy with that one so.... problem solved....
Click to expand...
Click to collapse
original firmware
jwalesch said:
...install the old COS on your Swift?
I downloaded all the files from G4liant's MEGA cloud storage but don't know how to continue.
Please, help if you can (see my reply to his post, too (as of today 25. June 2017)).
Thanks!
jwalesch
__________________________________________________________________________
Click to expand...
Click to collapse
Do you have TWRP recovery installed on your wileyfox ?
Via the twrp recovery, you can install what is in one of the zipfiles
I guess this one :
cm-13.1.2-ZNH2KAS3LG-crackling-signed-42f2b8e414.zip
MD5: 0AEF4E4A468EF34A6DA65712156ECB2C
contains the twrp installable original firmware....
Installing works the same as you would eg install a lineage custom rom.... TWRP is rather fool proof... I tried to install some of the other files, in the other zipfiles and twrp just refused... so ... try.... no need to install google apps here, everything is in the image... As you will see in the filesize of het image, it is rather big, compared to the lineage custom roms... Everthing is there....
If you are so far... Let me know, i learned that you will have to disable the wileyfox to keep looking for updates, wileyfox will download over and over again the upgrade files, was kind of annoying...
TWRP recovery cannot be loaded on Wileyfox Swift
Hi!
I had TWRP installed, in fact in different versions.
But for whatever reason I cannot boot into TWRP anymore which is precisely one of the problems I'm having now that I wanted to flash the Lineage OS again on a second Swift (I might have erased the partition that I installed TWRP to). But I cannot install TWRP again either...
All I can reach is the bootloader which does give you an option to restart recovery but it doesn't work. The phone is stuck in a bootloop returning whatever you do to the bootloader.
So, I hoped to find some help in treating the phone to a new or its original bootloader...
Thanks for helping!
jwalesch
__________________________________________________________________________
eskodisk said:
Do you have TWRP recovery installed on your wileyfox ?
Via the twrp recovery, you can install what is in one of the zipfiles
I guess this one :
cm-13.1.2-ZNH2KAS3LG-crackling-signed-42f2b8e414.zip
MD5: 0AEF4E4A468EF34A6DA65712156ECB2C
contains the twrp installable original firmware....
Installing works the same as you would eg install a lineage custom rom.... TWRP is rather fool proof... I tried to install some of the other files, in the other zipfiles and twrp just refused... so ... try.... no need to install google apps here, everything is in the image... As you will see in the filesize of het image, it is rather big, compared to the lineage custom roms... Everthing is there....
If you are so far... Let me know, i learned that you will have to disable the wileyfox to keep looking for updates, wileyfox will download over and over again the upgrade files, was kind of annoying...
Click to expand...
Click to collapse
I have found a way to install TWRP (different versions) but didn't know how to start it.
In this post I found how to:
https://forum.xda-developers.com/wileyfox-swift/help/foolproof-twrp-guide-wileyfox-swift-t3616571
It's keeping the volume down button held down until TWRP starts, then you can do everything from there.
Everything?
I installed Lineage OS 14.1 (nightly as of 2017/06/19) as well as GApps, wiped Cache/DALVIK and restarted the system.
The OS wouldn't start, only the bootloader could I get the phone to start.
So, TWRP is there, the OS is there, even GApps are there, I just cannot boot into the OS to use the phone.
Any new ideas?
jwalesch
jwalesch said:
Hi!
I had TWRP installed, in fact in different versions.
But for whatever reason I cannot boot into TWRP anymore which is precisely one of the problems I'm having now that I wanted to flash the Lineage OS again on a second Swift (I might have erased the partition that I installed TWRP to). But I cannot install TWRP again either...
All I can reach is the bootloader which does give you an option to restart recovery but it doesn't work. The phone is stuck in a bootloop returning whatever you do to the bootloader.
So, I hoped to find some help in treating the phone to a new or its original bootloader...
Thanks for helping!
jwalesch
__________________________________________________________________________
Click to expand...
Click to collapse
jwalesch said:
[...]
So, TWRP is there, the OS is there, even GApps are there, I just cannot boot into the OS to use the phone.
Any new ideas?
jwalesch
Click to expand...
Click to collapse
Try installing the system and the GApps separately:
Wipe again, install system, then boot to system, when Lineage has successfully booted for the first time (may take a couple of minutes), go back to TWRP and install GApps.
jwalesch said:
I have found a way to install TWRP (different versions) but didn't know how to start it.
In this post I found how to:
https://forum.xda-developers.com/wileyfox-swift/help/foolproof-twrp-guide-wileyfox-swift-t3616571
It's keeping the volume down button held down until TWRP starts, then you can do everything from there.
Everything?
I installed Lineage OS 14.1 (nightly as of 2017/06/19) as well as GApps, wiped Cache/DALVIK and restarted the system.
The OS wouldn't start, only the bootloader could I get the phone to start.
So, TWRP is there, the OS is there, even GApps are there, I just cannot boot into the OS to use the phone.
Any new ideas?
jwalesch
Click to expand...
Click to collapse
I had the same problem with lineage.... only bootloader when powering on.... That is the reason why I went back to the original firmware because that solved my problem.... I once found an older lineage rom suggested somewhere on the forum that worked and got me out of the bootloader but that version was buggy... Updating from there to a the latest linage got me back to the bootloader only problem....
I will stay on the cyonogenmod now.... Until perhaps someone can tell me how to really solve the bootloader only by power up problem....
eskodisk said:
[...]
I will stay on the cyonogenmod now.... Until perhaps someone can tell me how to really solve the bootloader only by power up problem....
Click to expand...
Click to collapse
Are you back on the cm-13.1.2-ZNH2KAS3LG-crackling-signed-fastboot-84f0d5200b.zip?
If so, you should be able to install and run TWRP 3.1.1.0.
TWRP then should be able to mount all partitions, including 'system'.
Then you can install the current Lineage via TWRP, wipe and restart system.
When Lineage has booted once, you can go back to TWRP and install the GApps.
Let me know if you get stuck at one point.
total backup of existing system ?
kabu83 said:
Are you back on the cm-13.1.2-ZNH2KAS3LG-crackling-signed-fastboot-84f0d5200b.zip?
If so, you should be able to install and run TWRP 3.1.1.0.
TWRP then should be able to mount all partitions, including 'system'.
Then you can install the current Lineage via TWRP, wipe and restart system.
When Lineage has booted once, you can go back to TWRP and install the GApps.
Let me know if you get stuck at one point.
Click to expand...
Click to collapse
Can i backup my existing system in twrp... I tried lineage a dozen times before and always got stuck on bootloader. So can I backup my current setup because at the moment everything works as it should.... ????? I formatted my sd card as system memory so... ????
If TWPR is running and you can mount the system partition, you should be able to make a back-up via TWRP. (Not of your pictures, music and so on, see TWRP disclaimer.)
Install LineageOS from a running cm-13.1.2-ZNH2KAS3LG-crackling
Hi there!
Yes, my Wileyfox Swift is running the CyanogenMOD version cm-13.1.2-ZNH2KAS3LG-crackling.
Everything seems to be OK, it just wants to keep downloading an update which I can save but when I'm asked to install it the normally automatic installation process doesn't work:
The phone reboots back to TWRP but doesn't show the just downloaded .zip file (which normally would happen) and doesn't install it either. Installation stops in TWRP, when I tap on REBOOT > SYSTEM the OS reboots normally but shows the OS version I had before.
Can you tell me where these update .zip files are saved so that I could install it maybe from the TWRP's file manager?
If that doesn't work I would try to update TWRP and after that install the current Lineage OS over the CM 13.1.2 as you suggested.
Thanks for helping!
jwalesch
________________________________________________________________________________________________
kabu83 said:
Are you back on the cm-13.1.2-ZNH2KAS3LG-crackling-signed-fastboot-84f0d5200b.zip?
If so, you should be able to install and run TWRP 3.1.1.0.
TWRP then should be able to mount all partitions, including 'system'.
Then you can install the current Lineage via TWRP, wipe and restart system.
When Lineage has booted once, you can go back to TWRP and install the GApps.
Let me know if you get stuck at one point.
Click to expand...
Click to collapse
jwalesch said:
Hi there!
Yes, my Wileyfox Swift is running the CyanogenMOD version cm-13.1.2-ZNH2KAS3LG-crackling.
Everything seems to be OK, it just wants to keep downloading an update which I can save but when I'm asked to install it the normally automatic installation process doesn't work:
The phone reboots back to TWRP but doesn't show the just downloaded .zip file (which normally would happen) and doesn't install it either. Installation stops in TWRP, when I tap on REBOOT > SYSTEM the OS reboots normally but shows the OS version I had before.
Can you tell me where these update .zip files are saved so that I could install it maybe from the TWRP's file manager?
If that doesn't work I would try to update TWRP and after that install the current Lineage OS over the CM 13.1.2 as you suggested.
Thanks for helping!
jwalesch
________________________________________________________________________________________________
Click to expand...
Click to collapse
What update does it want to keep downloading? I guess it might be the official stock 7.1.1..
You probably need to download the Lineage.zip manually from official Lineage downloads.
Then restart to TWRP and install the Lineage.zip.
TWRP has a toggle button in the lower left corner, where you can switch from 'Install image' to 'Install zip'. With 'install zip', you should find the zip.
The update is cm-13.1.2-ZNH2KAS7EB-crackling.
I have it ready to be installed on the phone but it won't show in any filemanager, be it in TWRP nor the system's filemanager nor AMAZE filemanager which I also installed.
So, I assume the download either isn't actually saved properly or it's a hidden file or something of that sort.
In other threads they say that updates were saved to a folder called "cmupdater". I cannot find any folder with that name either.
I also have the latest LineageOS .zip file ready to be installed on my phone and have tried to install that from TWRP (by the way: Now running the latest version for the Wileyfox Swift, ie. twrp-3.1.1-0-crackling). All it does is it produces an error saying something like "Error 7... cannot be installed".
SOLVED for now:
From here https://cyanogenupdatetracker.com/downloads/ I downloaded the latest available CM version (SW27-WF-CRACKLING-CM-13.1.5-ZNH2KAS7EB-RECOVERY.zip) which seemed to be exactly the one that my phone kept downloading and couldn't install.
I copied it to my external sd card and installed it from there via TWRP.
After that the system rebooted normally, Android then updated all my installed apps and now the system is downloading yet another update:
Android 7.1.1 (Nougat) - TOS111B
As I know that version of Android on the Wileyfox it's not actually something I would want to install myself. But I shall try to install the latest Lineage OS instead.
Let's keep each other posted (in German?)!
___________________________________________________________________________________________________
kabu83 said:
What update does it want to keep downloading? I guess it might be the official stock 7.1.1..
You probably need to download the Lineage.zip manually from official Lineage downloads.
Then restart to TWRP and install the Lineage.zip.
TWRP has a toggle button in the lower left corner, where you can switch from 'Install image' to 'Install zip'. With 'install zip', you should find the zip.
Click to expand...
Click to collapse
jwalesch said:
The update is cm-13.1.2-ZNH2KAS7EB-crackling.
I have it ready to be installed on the phone but it won't show in any filemanager, be it in TWRP nor the system's filemanager nor AMAZE filemanager which I also installed.
So, I assume the download either isn't actually saved properly or it's a hidden file or something of that sort.
In other threads they say that updates were saved to a folder called "cmupdater". I cannot find any folder with that name either.
I also have the latest LineageOS .zip file ready to be installed on my phone and have tried to install that from TWRP (by the way: Now running the latest version for the Wileyfox Swift, ie. twrp-3.1.1-0-crackling). All it does is it produces an error saying something like "Error 7... cannot be installed".
SOLVED for now:
From here https://cyanogenupdatetracker.com/downloads/ I downloaded the latest available CM version (SW27-WF-CRACKLING-CM-13.1.5-ZNH2KAS7EB-RECOVERY.zip) which seemed to be exactly the one that my phone kept downloading and couldn't install.
I copied it to my external sd card and installed it from there via TWRP.
After that the system rebooted normally, Android then updated all my installed apps and now the system is downloading yet another update:
Android 7.1.1 (Nougat) - TOS111B
As I know that version of Android on the Wileyfox it's not actually something I would want to install myself. But I shall try to install the latest Lineage OS instead.
Let's keep each other posted (in German?)!
___________________________________________________________________________________________________
Click to expand...
Click to collapse
English is forum language I guess, you could probably send me a private message to clarify anything in German.
I also had the error 7 issue when installing Lineage, you need to wipe system (you will loose everything though, it is not possible to install Lineage over Cyanogen, like a dirty flash).
In TWRP, choose Wipe/advanced Wipe/ tick system only / repair, 2F2S. After that, format data.
Then the installation of Lineage with TWRP should run through. Let the system boot for the first time, if it runs, boot back to TWRP and install GApps.
With that method, I am on LOS nigthly 20170626 now and happy.
Hi kabu83!
Thanks a lot for your last reply - it helped me to finally get Lineage OS 14.1 installed!
At the moment the phone is rebooting the system after installing the GApps, everything seems to run smoothly and - guess what - I'm happy, too, now!
How about sending me a PM? (As I have no clue as to how that works it would be nice if you could send me that one more reply to let me know.)
hey guys, so i have a 64GBs Oneplus 5T and i rooted my phone 1 year ago with magisk using fastboot And TWRP. i used to get OTA updates and i was able to update my phone always. when i recieve an update i would remove TWRP , flash back the stock recovery and remove the root, update my phone then get them back. and this method worked many times.
right now i cant do this anymore. when i download the OTA update and it finishes the reboot the upgrade button doesnt work anymore. tried aswell to update it manually using local update the local update button doesnt work. tried putting the zip file to the internal storage and flasing it with the stock recovery from internal storage , it doesnt work aswell it doesnt even browse my phone .. tried flashing the ota zip files with TWRP it gives me "updater process ended with error 7"
right now phone works perfectelly fine, i have access to stock recovery and TWRP aswell. BUT iam unable to update my phone anymore.. any advices?
mastrok said:
hey guys, so i have a 64GBs Oneplus 5T and i rooted my phone 1 year ago with magisk using fastboot And TWRP. i used to get OTA updates and i was able to update my phone always. when i recieve an update i would remove TWRP , flash back the stock recovery and remove the root, update my phone then get them back. and this method worked many times.
right now i cant do this anymore. when i download the OTA update and it finishes the reboot the upgrade button doesnt work anymore. tried aswell to update it manually using local update the local update button doesnt work. tried putting the zip file to the internal storage and flasing it with the stock recovery from internal storage , it doesnt work aswell it doesnt even browse my phone .. tried flashing the ota zip files with TWRP it gives me "updater process ended with error 7"
right now phone works perfectelly fine, i have access to stock recovery and TWRP aswell. BUT iam unable to update my phone anymore.. any advices?
Click to expand...
Click to collapse
hi, without knowing your device-status, i recommend updating TWRP & dont forget 'disabling' MAGISK inkl modules before flashing (possibility of bootloop)!!
OREO - twrp-3.2.2-x_blu_spark_v8.83_treble-op5_op5t - flashing PIE with this TWRP will end up in an "compatibility error" [you have to remove compatibility.zip inside the OTA]
PIE - twrp-3.2.3-x_blu_spark_v9.91_treble-op5_op5t
my steps are: download OTA > go to MagiskManager -- 'restore images' > reboot into TWRP -- flash OTA.zip (wipe C/D)+Magisk18.1+[Kernerl] > reboot -- updated and MagiskModules are enabled
Hi All 1st new here and just joined.
What I need is some help and advice, looked through but cant really find anything to help me.
I have a Samsung Galaxy S20 which was rooted by a well known online rooting place.
What I need is, I want to update the software but this has been disabled and it is not even showing in the settings. When I search its there but cant do anything with it. The root is oem firmware not custom it has mgdsk on not sure about twrp. Root checker pro and is all green confirming root.
What I want to be able to do is update the software as still on 10 and some of my apps are saying i need to update. I cant do this as the Software Update is Disabled and not actually in the list. Any advice on how and what I can do to update the phone? Or put back on the Software Update as I have looked all day and found nothing to help me.
Rooted Galaxy S20, wanting to update firmware, mgdsk, not sure how to get Software Update back.
TY
I have seen multiple post about people loosing root access after the OTA.. I have jotted down the below the instructions on how to retain root access after OTA updates.
Follow this steps... 1.Magisk Manager → Uninstall → Restore Images). Do not reboot or you will have Magisk uninstalled.
2. Now Update the system and let it install completely. Do not press the reboot button.
3. Now install TWRP A/B Retention Script from Magisk Manger. This module is available on Magisk (if you have twrp as custom recovery) Skip this if you do not have TWRP installed
4. Go to (Magisk Manager → Install → Install to Inactive Slot) and install Magisk.
5.Once Magisk installation is done, press the reboot button in Magisk Manager.
Your phone may get into bootloop once, if that happens just restart the phone again.
Voila now you have your OnePlus updated and You also have Magisk installed with root access
WILL THIS WORK PLEASE? EVEN TOUGH I HAVE SOFTWARE UPDATE DISABLED?
Dj-Clubber-UK said:
I have seen multiple post about people loosing root access after the OTA.. I have jotted down the below the instructions on how to retain root access after OTA updates.
Follow this steps... 1.Magisk Manager → Uninstall → Restore Images). Do not reboot or you will have Magisk uninstalled.
2. Now Update the system and let it install completely. Do not press the reboot button.
3. Now install TWRP A/B Retention Script from Magisk Manger. This module is available on Magisk (if you have twrp as custom recovery) Skip this if you do not have TWRP installed
4. Go to (Magisk Manager → Install → Install to Inactive Slot) and install Magisk.
5.Once Magisk installation is done, press the reboot button in Magisk Manager.
Your phone may get into bootloop once, if that happens just restart the phone again.
Voila now you have your OnePlus updated and You also have Magisk installed with root access
WILL THIS WORK PLEASE? EVEN TOUGH I HAVE SOFTWARE UPDATE DISABLED?
Click to expand...
Click to collapse
Does the S20 have a/b partitions?
Found the answer - https://www.androidpolice.com/2020/...ung-phones-support-androids-seamless-updates/
No it doesn't
If so then yes it would work if you could download and install updates.
If the phone was rooted with a patched Odin install then you most likely have to wait for the newer version patched and update the same way as last time.
Sent from my ONEPLUS A6010 using Tapatalk