Hello guys, i have a mi mix 2. I want to install twrp and custom rom. When i put the device in fastboot mode, it isnt detected and i receive in device manager a yellow exlamation park (no driver found for device). Can you help me please?
I found some drivers on some sites but most of them are scams.
what windows u use ?? if win10 do u already off signature of try uninstall previous qualcomm driver reinstall and restart ur pc or laptop, i have same exp for 1st try to custom my chiron
Related
Hi! I'vs just bought a new computer and I have to migrate from my desktop PC to the new laptop. The problem comes after restart the PC. I've installed the Android SDK, the PCCompanion, the Gordon's Gate drivers and the fastboot drivers from flashtool, as on my desktop computer with the advanced reinstall to avoid the prohibition to install unsigned drivers. The problem comes here because with my PC I could flash kernels at this point, but, in my new laptop appears another unknow device called Sony Fastboot Interface inside Android Device in the Device Manager. Any ideas?
No one?
What happens when you try to install the drivers ?
Is it in any way colides with flashing and so on ?
IF not then don't worry.
When I finish, appears another unknow device (Android Bootloader Interface) and if I try to flash a kernel, the console gives me waiting for device
I recall installing few drivers.
1 Regular usb
2 Fastboot mode drivers
3 Flashtool drivers
Try googling "xperia fastboot drivers" and download any you can find, i remember downloading some from sony's official webiste.
Here:
http://developer.sonymobile.com/downloads/drivers/fastboot-driver/
Connect the device in normal mode and fastboot mode and manually select the path to the drivers.
I ended up doing it in windows safe mode, because my pc kept freezing.
GL
Have you tried using flashtool for kernel flash?
Sent from my Xperia X10 using xda premium
Which OS are you using?
I carelessly wiped the system in TWRP, now i have a big problem -"no OS ".Unfortunately,it can't mount USB driver by OTG and device can't be detected what ever in Recovery or bootloader mode . so I can't flash a new rom into it.What can I do now ?I have switched many PC with different OS ,windosw xp ,7 ,8 ,but none of them can recognize my device which make me can't install driver for it.What can I do now ?
lonelystar21 said:
I carelessly wiped the system in TWRP, now i have a big problem -"no OS ".Unfortunately,it can't mount USB driver by OTG and device can't be detected what ever in Recovery or bootloader mode . so I can't flash a new rom into it.What can I do now ?I have switched many PC with different OS ,windosw xp ,7 ,8 ,but none of them can recognize my device which make me can't install driver for it.What can I do now ?
Click to expand...
Click to collapse
Just flash the factory image and start from scratch.
http://forum.xda-developers.com/showthread.php?p=45671279#post45671279
You can also get drivers that will work with TWRP here:
http://forum.xda-developers.com/showthread.php?t=2391236
lonelystar21 said:
I carelessly wiped the system in TWRP, now i have a big problem -"no OS ".Unfortunately,it can't mount USB driver by OTG and device can't be detected what ever in Recovery or bootloader mode . so I can't flash a new rom into it.What can I do now ?I have switched many PC with different OS ,windosw xp ,7 ,8 ,but none of them can recognize my device which make me can't install driver for it.What can I do now ?
Click to expand...
Click to collapse
This is the driver you need in order to use ADB while in recovery in addition to the Google Driver or else you would see "Flo" under Unknown Devices in your computer device manager. Or you can restore the stock 4.3 ROM via fastboot.
the problem is it won't come out as "flo" or unknown devices when i connect to PC , it just nothing happen , that's the problem :crying::crying:
Yureka plus i have
All derives all installed .pd net also installed in phone and pc as tutorial
Windows driver Singnture* ennble but my phone not detected on pc
I want to flash recovery but tools say waiting for devices
Please helpppppp
Greetings every one ..
I have a half dead Oneplus 3 Unlocked + Rooted
here is my problem
there is no OS in it and i flash TWRP many times via ADB and wont boot to it
and i tried to flash the stock recovery V2.0 and done successfully
the sideload mode Recognize my OP3 but when i try to flash the Oxygen Rom it Gives me cannot read
also i tried the Unbrick Tool when the device is connect it showing me Qualcomm hs-usb qdloader 9008
but when i power up the tool as administrator it showing me (no device)
see here : https://www.youtube.com/watch?v=BIbagVAXJJk
Thanks .
on the unbrick guide try method 2 but completley power off the device and count to 10 when holding the vol up button THEN plug the device in. i had that issue also. if you get errors or for some reason it dosnt show up again try on a diffrent pc it will work
Try method 2. BTW "cannot read" error has to do with faulty ADB drivers, get the platform ones
I did instal the right ADB drivers in fact
still no luck
The ones from platform tools? Since that "cannot read" error has nothing to do with your device. Have you tried renaming it? Rebooting your PC? Last one did wonders for me for some stupid reason.
Hi,
I also had this message of "can not read" in sideload mode, this problem often happens with Windows 10, so I used Windows 7 on another pc and it was OK.
I tried Windows 10 & 8.1 & 7 & XP
still The same problem
What if you flash Twrp and boot into it? Then u can adb push the filemm
I tried via fastboot and its done right
but when i reboot into the new TWRP recovery its stuck in the boot oneplus as same like the Video shown up
book an appointment with oneplus live chat so a service tec can fix it and if they ask if it was rooted say no
Hi,
If you access TWRP, install the Official Oneplus Recovery 4.0.2
In TWRP click "intaller" then choose "install image" and select the file you will have to copy to the phone in recovery mode.
Then restart in recovery mode, choose english, then "adb sideload mode"
From there you should be able to flash your phone with an official Nougat zip.
Do the under windows 7.
It is necessary to install the Oneplus USB drivers and ADB tool on your PC before any manipulation.
Finally I solved the problem
like i said B4 my phone wont boot into TWRP by any chance
i traid all the Officials TWRP one and they stuck on the boot image or power the phone off
i flashed a modified twrp (blu_spark 3.0.3-x) thanks for this beautiful smart man eng.stk if im not wrong
and thank you all for the help
i had similar issue...with several phones.. download Malwarebytes trial version and run it...i had a few stealth root tool kit viruses.causing my system to have a hiccup....
Hi friends,
I recently installed a fresh windows 10 latest build (16299).. I have 64 bit windows 10.. The problem is i cant install moto z play drivers on this build. I was able to install drivers on the previous build of windows 10 but on this build i failed... Motorola Device Manager is stuck at step 2 (Installing USB drivers)... I waited for hours but it is stuck... I tried closing and opening the app but still no luck... Tried restarting and then installing drivers but still no luck.. Everything else is installed perfectly including adb but i am unable to install moto drivers.... Can someone help... Without drivers i wont be able to even flash my device
Anyone??? I need to flash my device...please help
1) Install drivers from this topic https://forum.xda-developers.com/showthread.php?t=2588979
2) After that you will be able to manually assign Android ADB Interface driver to your phone in Device Manager
freeman_g said:
1) Install drivers from this topic https://forum.xda-developers.com/showthread.php?t=2588979
2) After that you will be able to manually assign Android ADB Interface driver to your phone in Device Manager
Click to expand...
Click to collapse
I already have adb installed and it worls fine...its just i am unable to install moto drivers on my pc... I even tried after disabling driver signature bull**** that was introduced in windows...
Those pack also contains proper ADB driver. You do not need separate Moto drivers, original ADB driver from Google will work fine too.
After installation connect your phone in fastboot mode to PC and go to Device Manger. Then update the driver of your phone in manual mode (when you have to choose from the drivers already installed on your PC) and choose Android ADB driver from the list.