Related
I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
Hi, I have reflashed my ROM I dont know how many times. Yesterday I tried to connect via activesync on a new ROM and it wouldnt connect. These are some of the things that happened:
Device orange charging light flashes a few times then goes off [never seen THAT before]
Activesyc menu comes up on device but activesync doesnt connect
Get 'this device can perform faster' message on desktop
Sometimes get USB devce not recognized on desktop
SOmetimes device orange charging light it stays on if I plug direct into PC but still doesnt activesync
I have tried to connect as DISK DRIVE but I dont see the device on my PC.
Have tried different ROMS, 6.5, 6.51, sense 2.1 and 2.5 but all have same issue. Have also tried connecting to other computers. same issue.
Have played around with USB to PC menu options (enable / diable faster data sync etc) but doesnt make a difference.
Anyone had this problems? Thoughts?
Have you tried diselecting "ask me 1st about usb connection type when I connect the device to the pc" under USB to PC settings
It worked for me
This is the exact problem I am facing!
I tried everything - as diskdrive, activesync (with/without speedup), etc.
On many ROMs, even the original one (WM6.1)
Can't connect - every PC gives an 'unknown device' and on some ROMs I cannot charge via USB, only via mains...
I also tried without the question on connection.
Just some thoughts:
Do you have corruptions on screen sometimes? (Some graphical glitches)
Any .CAB files you cannot install?
Did you try to reflash the same ROM more than once?
tried to connect without card in the device and in flight mode? (Uses less power)
With me it started after a ROM flash from Miri... (I don't blame him!!)
The Hard SPL did not give me any problem, the radio was not flashed, just the OS. But reverting did not help.
I certainly hope you will find a solution, since I have the exact same problem!!
Do you stil know what ROM you flashed when this problem occured?
I reverted to original ROM 6.1 AND 6.5 which included everything - boot, radio, os, stardup image. But it did not change!
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
ekerbuddyeker said:
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
Click to expand...
Click to collapse
And how did you figured it out? Did you return the device to the shop?
I have this exact same issue except I am on AthineOS... I thought it was my PC until I read these posts. No OS updates or any other machine updates were performed except on my device. Any clues as to a fix?
Somehow I don't think this is just hardware.
I did drop my device once, but that was even before first flash. After that it still worked.
So, some weeks later I HSPLed without any problem. After that the device still worked.
Then, after investigating which ROM to use I flashed the ROM a few days later.
Right after the first flash it all still worked. So, had to flash another and from that moment on the device cannot be reckognised by any PC.
I still think it has something to do with the flashing. I think the device does not give correct feedback when it receives some commands from PC (eg. the command to reply the device type/number)
Does anyone know a program which can check the USB port for the HTC Touch Pro 2? Just to test wheather the connector pins are ok?
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
crazythunder said:
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
Click to expand...
Click to collapse
These are the first things done. And this was already written in here.
It happens with many PCs, including some on which the device never connected to.
Also tried different cables, ports, etc.
Also disabled the fast transfer etc. etc.
Even tried several other ROMs, inclusding original Dutch 6.1 and Dutch 6.5
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
waynehead05 said:
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
Click to expand...
Click to collapse
Some questions, to verify this is due to flashing or is a fault in the design of the device...
- Where did you get the device?
- Have you flashed the device?
- Did you accidentally drop the device?
hi just to say had a completely orignal o2 xda orbit 1 flashed with new rom everything worked perfect before now active sync plays up i can sometimes connect but get usb device not reconigsed then click cross then pull out usb then reinsert then active sync connects works fully functional then after 5 min it disconects this is driving me mad as use active sync for a fast internet connection on my pda as my wifi is crap
Help! I have 2 Mi Max Hydrogen devices.
Device 1: Mine running Lineage OS
Device 2: My wife's running with MIUI Global 7.3.11.0 which is having problem. Just stock when purchased.
Device 2 cant connect to any PC! I have tried different cables but still not working. device 1 can connect. The Device 2 can use OTG flash drives perfectly, i can access the files and copy paste so the micro USB port seems OK right?
I have tried the EDL method but computers(i have several) doesn't seem to respond to this device, it seems nothing is being plugged.
I don't want to make this post too long, so my question is, is my wife's Mi Max USB port have hardware problem? Is there a way to flash ROM or even just root for this device without connecting to PC?
Btw, warranty no more
Anyone? Is my Mi Max have hardware problem?
I have tried to update the OS using the default MIUI updater but it always fails, (cannot verify rom), have tried different ROMs using this method but still same error.
If you will convince me that my device have hardware problem, then i will have peace of mind! Knowing that I lost the only option to flash ROMS.
Otherwise, hope someone could point me to some solution as i would like to update/change the ROM of this device.
Thank you in advance for your kind assistance!
Have you tried an usb adapter to transfer files?
Sent from my MI MAX using XDA-Developers Legacy app
mongoload said:
Help! I have 2 Mi Max Hydrogen devices.
Device 1: Mine running Lineage OS
Device 2: My wife's running with MIUI Global 7.3.11.0 which is having problem. Just stock when purchased.
Device 2 cant connect to any PC! I have tried different cables but still not working. device 1 can connect. The Device 2 can use OTG flash drives perfectly, i can access the files and copy paste so the micro USB port seems OK right?
I have tried the EDL method but computers(i have several) doesn't seem to respond to this device, it seems nothing is being plugged.
I don't want to make this post too long, so my question is, is my wife's Mi Max USB port have hardware problem? Is there a way to flash ROM or even just root for this device without connecting to PC?
Btw, warranty no more
Click to expand...
Click to collapse
I don't think it's a hardware problem as OTG uses all usual +one ground wire on USB so if it's working all is. It's probably bad modified ROM by resellers & a ancient one.
Did you try to cut the man In the middle & update directly from the phone? Like this:
http://en.miui.com/a-232.html
It's basically a side load from a internal SD card method.
Naturaly you can download it directly to the phone and put into according required directory (no need for a PC at all). It's pretty much simple as it can get. Please be certain that you Download PROPER version of ROM for your device exact model!
http://en.miui.com/download-302.html
I recommend at least for now that you stick to the global stable ROM.
I hope that it works out like this for you & do me a favour & leave absolutely bad review to that reseller on Amazon.
Best regards.
Edit:
Actuality to make a process even more easy you can from Updater app chose download update option that should automatically start download of appropriate latest ROM versions (stable global) for a device & directly to the appropriate folder.
my a2 lite does not connet to my pc, I have installed drivers, put it on usb debug, but my pc does not recognize de phone, I have tried different usb ports and cables with no success, it does charge eventually with some cables, but I don't know if this is hardware problem or there is any setting I am missing, it does not give me any choice of chosing the usb kind of conection
it is a new phone just prepped for everyday use, not hacked or modded in any way
USB OTG is working but only reading, I cannot write in external usb drive with es file explorer, or the includer file aplication, it says unsupported operation
any help?
Set hardware id in the adb_usb.ini file perhaps
cpu004 said:
Set hardware id in the adb_usb.ini file perhaps
Click to expand...
Click to collapse
thank you, but I cannot acces from adb as there is absolutely no conection from my computer, it only starts charging but as if it were just a charger, there is no usb mode options avalaible y my phone, and the pc does not recognize anything conected
I have tried to connect with another computer with the same results, it only gets power, but no data comunication whatsoever
as nobody gives any clue or info about some hidden setting, I must assume this is another case of bad quality control in xiaomi products, I will check with the seller
Did you specifically set file transfer mode via the notification drawer or left it on charge only?
cpu004 said:
Did you specifically set file transfer mode via the notification drawer or left it on charge only?
Click to expand...
Click to collapse
the phone does not detect either that it is connected to a computer, so the notification to select the mode of connection does not even show
I have tried usb otg and I can read fine but I cannot write at all in a pendrive
I have installed also an sd card as internal memory and have storage errors all the time so I have removed it
I have tried also conection in fastboot mode but the computer still does not recognize anything connected
I have uses several cables, usb ports and even 2 different pc with same results
My only guess is that there were some hidden config setting that is messing with the phone, that's the reason I am asking before going to the seller.
Seems like a broken USB pin then
cpu004 said:
Seems like a broken USB pin then
Click to expand...
Click to collapse
an usb pin should not affect internal sd memory, and usb does not work like water pipes, one pin data in one pin data out, they need both data pins for reading also, so as it can read from pendrive the problem is somewhere else, not in the connector.
This could be a hardware problem. Have you tried to connect it to another computer?
I have already tried on 3 diferent computers with same results. The only diference so far is that it actually does not read either the content of a pendrive connected through OTG, the first day it read it, now it only detects but reads nothing.
Also when sd is configured as internal memory, instead of reading internal memory, that seems to be the normal result, I can read only the sd card with android file explorers
I have the same problem.
No connection data with pc/mac, it only charges.
I'm italian and like many other italians, I've also the problem with Sim slot 2 with no connect..
robiox said:
I have the same problem.
No connection data with pc/mac, it only charges.
I'm italian and like many other italians, I've also the problem with Sim slot 2 with no connect..
Click to expand...
Click to collapse
It is good to know I am not the only one.
F**k, this phone starts to look like a piece of garbage I dont connect to USB, I dont use SD not 2nd sim, so I did not experience these issues, but, f**k again..
Have you tried rebooting? Press the power button for 15secs. to power it off. Use another cable, use another PC, make sure the cable is plugged in properly... bla bla bla. Oh, have you tried placing the phone into a dry rice bowl? Haha (sorry, I had to). I'm sure you've tried it all.
So, I have not much to say. Only that I had a similar problem with a Moto G after I flashed a LineageOS ROM. It worked fine before, but with the new ROM, the USB didn't work at all (it could only read OTG). It was stuck in the "charging" mode. No notification nor option to turn it to file transfer. The PC didn't recognise it at all, either.
Solution? Initially, I turned on USB debuging option and the PC saw the phone (on windows device manager, it was there, but not on MyPc). It was some advance. I can't remember if adb detected it.
Final solution? Luckily my phone was rooted and had a custom recovery, so I could easily flash the same ROM from the TWRP recovery and everything works fine now.
You might try using Xiaomi's flash tool to try to flash the orginal ROM again IF the phone is recognised by the tool (try if it can see the phone) http://en.miui.com/download-354.html
And I suggest contacting Xiaomi for a warranty claim if needed, 'cause it looks like a harware problem (a pin the the microUSB port issue). But be ready to answer the questions posted above several times haha.
Good luck!
adriakus said:
Have you tried rebooting? Press the power button for 15secs. to power it off. Use another cable, use another PC, make sure the cable is plugged in properly... bla bla bla. Oh, have you tried placing the phone into a dry rice bowl? Haha (sorry, I had to). I'm sure you've tried it all.
So, I have not much to say. Only that I had a similar problem with a Moto G after I flashed a LineageOS ROM. It worked fine before, but with the new ROM, the USB didn't work at all (it could only read OTG). It was stuck in the "charging" mode. No notification nor option to turn it to file transfer. The PC didn't recognise it at all, either.
Solution? Initially, I turned on USB debuging option and the PC saw the phone (on windows device manager, it was there, but not on MyPc). It was some advance. I can't remember if adb detected it.
Final solution? Luckily my phone was rooted and had a custom recovery, so I could easily flash the same ROM from the TWRP recovery and everything works fine now.
You might try using Xiaomi's flash tool to try to flash the orginal ROM again IF the phone is recognised by the tool (try if it can see the phone) http://en.miui.com/download-354.html
And I suggest contacting Xiaomi for a warranty claim if needed, 'cause it looks like a harware problem (a pin the the microUSB port issue). But be ready to answer the questions posted above several times haha.
Good luck!
Click to expand...
Click to collapse
I have done all your sugestions previously, even reseting phone with a new gmail account so no config setting from other phone could interfere, I have also tried fastboot, but although phones goes to fast boot mode the pc does not recognize connection either
it is not an usb pin issue, tried 6 cables, 4 computers, 10 or more usb 2 an 3 ports, I am negotianting in aliexpress a refund, we'll see
If I go into recovery mode with power vol+ a broken android appears.
elsita said:
I have done all your sugestions previously, even reseting phone with a new gmail account so no config setting from other phone could interfere, I have also tried fastboot, but although phones goes to fast boot mode the pc does not recognize connection either
it is not an usb pin issue, tried 6 cables, 4 computers, 10 or more usb 2 an 3 ports, I am negotianting in aliexpress a refund, we'll see
If I go into recovery mode with power vol+ a broken android appears.
Click to expand...
Click to collapse
I don't know if you already did this, but try using a PC with Linux (you can use Ubuntu without installing it on the PC, then install the fastboot package).
Hi,
I had no problem with fastboot and adb with Mac!
Phone recognized by the machine and do transfer boot.img for magisk...
Now I Win!
I can see the internal memory with Android File Transfer (Trasferimento File Android in italian!) - this is the link https://www.android.com/filetransfer/.
My version of Build is V.9.6.8.0.
Solution:
- Connect the phone to pc/mac;
- Go to: Settings -> System -> Developer Options -> Select USB Configuration -> select first "Charge" and then "MTP" (Media Transfer Protocol)
- The system recognize the phone!
[for italian, like me, andare su Impostazioni -> Opzioni Sviluppatore -> Seleziona Configurazione USB -> scegliere "Ricarica" e poi "MTP" (Media Transfer Protocol) ]
robiox said:
Hi,
I had no problem with fastboot and adb with Mac!
Phone recognized by the machine and do transfer boot.img for magisk...
Now I Win!
I can see the internal memory with Android File Transfer (Trasferimento File Android in italian!) - this is the link https://www.android.com/filetransfer/.
My version of Build is V.9.6.8.0.
Solution:
- Connect the phone to pc/mac;
- Go to: Settings -> System -> Developer Options -> Select USB Configuration -> select first "Charge" and then "MTP" (Media Transfer Protocol)
- The system recognize the phone!
[for italian, like me, andare su Impostazioni -> Opzioni Sviluppatore -> Seleziona Configurazione USB -> scegliere "Ricarica" e poi "MTP" (Media Transfer Protocol) ]
Click to expand...
Click to collapse
somehow i was able to connect through fastboot with the help os some advanced users, I unlocked boot and managed to flash original firmware using fastboot mode, the result: no usb connection, no pendrive otg, sd card as internal memory gives storage errors all the time ...
so the phone is faulty, now I am at aliexpress hands claiming for a refund and send back phone
elsita said:
somehow i was able to connect through fastboot with the help os some advanced users, I unlocked boot and managed to flash original firmware using fastboot mode, the result: no usb connection, no pendrive otg, sd card as internal memory gives storage errors all the time ...
so the phone is faulty, now I am at aliexpress hands claiming for a refund and send back phone
Click to expand...
Click to collapse
Where are you from? Where did did you purchase the phone (the actual store, is it in China)? Depending on where are you from and what country did you buy the phone from, by law, you'll get manufacturer warranty. So, any "official" distributor in your country will have to provide a warranty solution for you. If Ali Express is unable to provide you with a solution, look into that.
Let us know how it work out for you
adriakus said:
Where are you from? Where did did you purchase the phone (the actual store, is it in China)? Depending on where are you from and what country did you buy the phone from, by law, you'll get manufacturer warranty. So, any "official" distributor in your country will have to provide a warranty solution for you. If Ali Express is unable to provide you with a solution, look into that.
Let us know how it work out for you
Click to expand...
Click to collapse
I am from Spain, and the aliexpress seller has store in Spain, but you know how chinese vendors act ... no agreement so far, and now aliexpress decides, whenever they turn back to work, because China as you may know is a whole year vacation place for workers ...
My first Poco F3 is completely unlocked and running a custom rom, still able to connect to PC even now.
I have a second Poco F3 that I was able to originally connect to my PC to debloat, hadn't needed to connect it to a PC till now. Today was the day I could unlock it but when I connect it via USB cable, original or otherwise, no usb options appear on phone and nothing shows on PC. I can use the same cable on my first Poco F3 and everything works fine. I've tried multiple cables, reinstalling drivers, restarting phone and PC, trying a different PC, enabling debugging tools, etc.
Nothing shows in "My Computer"
Nothing shows in Device Manager
No usb options on phone (default is set to File Transfer)
Nothing shows in CMD with "adb devices"
Charging still works
Is there anything I can do to at the very least unlock the bootloader? Or is this not fixable?
long shot... check the usb C port for dirt/dust/fluff blocking connection...
Most probably u debloated an app responsable for media transfer. If u can, revert what u debloated.
Alin45 said:
Most probably u debloated an app responsable for media transfer. If u can, revert what u debloated.
Click to expand...
Click to collapse
Did a factory reset thinking that may have been the case, still no good.
Tried cleaning out the port and still no good either
I still think it's Windows. Please can you try putting Ubuntu (or another Linux distro) on a USB, booting from that, installing platform tools (ADB/fastboot etc) and then running ADB devices. Windows is very finiky sometimes.
Edit: when you plug in your phone to the PC do you get a notification saying charging? Or is there no notification? Also does it start charging the phone?
There is a delay before it begins charging and the charging animation plays but yes it does. But then there is no usb notification. Will try ubuntu and report back
Booting into Ubuntu, before installing platform tools the first phone that I knew worked showed up and showed up in adb devices when platform tools was used. The second still didn't show up, exactly the same as on windows
Try downloading the installed stock miui rom from the update menu in the miui update menu and re-install it on the phone
Unfortunately reinstalling latest package didn't help
Can't think of anything else to suggest. Sorry
If the usb connection continues to be nonexistent, is there any way to at least unlock the bootloader without using the Xiaomi Unlock tool on the PC?
Are you sure the USB cable you're using support transfert file?
Cjayy said:
If the usb connection continues to be nonexistent, is there any way to at least unlock the bootloader without using the Xiaomi Unlock tool on the PC?
Click to expand...
Click to collapse
Nope
Hmmmmm.....strange! I'm running out of ideas....try different USB ports on PC. Maybe it's a faulty USB-C port on phone after all.
do you have a type c usb-otg?
If yes then see if it is detected by the phone
X0PIRAT3 said:
Are you sure the USB cable you're using support transfert file?
Click to expand...
Click to collapse
Yes. Used 4 different cables, 1 of which is the cable that comes with the phone. None work on this phone but do on the first phone.
Alin45 said:
Hmmmmm.....strange! I'm running out of ideas....try different USB ports on PC. Maybe it's a faulty USB-C port on phone after all.
Click to expand...
Click to collapse
Tried different ports across 2 PCs. I'm starting to think it is a faulty port, though it worked fine a week ago.
arifqur said:
do you have a type c usb-otg?
If yes then see if it is detected by the phone
Click to expand...
Click to collapse
I honestly don't know if any of my cables are usb-otg, how would I check?
Try to use this version of Mi FLash Tool (only for drivers) : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
Extract and launch the executable then drivers install
Something like this. You can plug in any usb stick and see if it is detected. Another way to check whether the port on the phone is working for data as well
X0PIRAT3 said:
Try to use this version of Mi FLash Tool (only for drivers) : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
Extract and launch the executable then drivers install
Click to expand...
Click to collapse
Tried this and still no good.
arifqur said:
Something like this. You can plug in any usb stick and see if it is detected. Another way to check whether the port on the phone is working for data as well
Click to expand...
Click to collapse
I don't have anything like this but that reminded me of the usb-c to headphone adapter and that also doesn't work. Sound just plays out of the speakers.
Trying with Android Auto in the car, the car doesn't register a device connecting at all either.
Either the data transfer portion is somehow disabled on the device itself (which I would love to know how to enable it again if that's the case) or it's a damaged usb port. Just strange that it worked a week ago.
Something I forgot to mention, when I went to unlock the bootloader yesterday the phone did not show up anywhere except for in the ADBFastbootTools to debloat the software as a OnePlus device but then never showed up again.
Cjayy said:
Tried this and still no good.
I don't have anything like this but that reminded me of the usb-c to headphone adapter and that also doesn't work. Sound just plays out of the speakers.
Trying with Android Auto in the car, the car doesn't register a device connecting at all either.
Either the data transfer portion is somehow disabled on the device itself (which I would love to know how to enable it again if that's the case) or it's a damaged usb port. Just strange that it worked a week ago.
Something I forgot to mention, when I went to unlock the bootloader yesterday the phone did not show up anywhere except for in the ADBFastbootTools to debloat the software as a OnePlus device but then never showed up again.
Click to expand...
Click to collapse
I have the same problem, did you solve it ? I replaced the usb board of the phone, still not working.