Related
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.
My k01n has soft bricked
but it can enter droidboot
It has these options in droidboot :
REBOOT DROIDBOOT
REBOOT
FACTORY RESET
SD DOWNLOAD
POWER OFF
I change the stock firmware name from UL-K01N-WW-5.4.0.0-user.zip to ASUS_BUNDLE.zip and push into extsd and select SD DOWNLOAD but its not work .
Now .I need the raw firmware to use in AFT . AFT supports FE171CG Model .
I need,need,need raw file . Plz plz develop ver 5.4.0.0 and upload plz plz:crying::crying::crying::cryinglz
Help me help :crying:
I believe if we fix the partition for k01n then we can flash the firmware normally.
There is an instruction given in a Japanese forum: http://onehallyu.com/topic/294288-a-fluke-that-save-my-phone-fonepad-7fe171cg-from-hard-brick/
It seems possible to unbricked the device and repair the partition. I have tried the solution but it doesn't work. There is the same error mentioned by other people in that forum.
Anyone know how to solve this ? I'm willing to pay using paypal. I found no solution over the internet on how to fix the corrupt partition.
hi .. can you guys plz help me i have nova 2 plus and it is in bootloop after trying to root, can you guys plz help me flash the stock firmware , i cant find the stock firmware , my device model is BAC-L21, plz plz plz help
i really appreciate it
updated.. i found the firmware but i cant post the link but it is in a website called combinefile .com if u want to download it.
i downloaded the firmware and extracted the zip file till i got update.app but the update.app is over 4 GB in size and i cant copy it to my sdcard if FAT32 formatted, and when i reformatted the sdcard to NTFS and tried to force flash the firmware pressing VOLUME UP+DOWN+POWER KEY it says install system failed, so i dont know if it is because of the NTFS formatting which is not recognized by the phone or the phone is just dead totally.. i also extracted the Update.app file and flashed the boot.img , recovery.img and system.img but still the phone is not booting up.. can anyone answer or help plz
Try this firmware instead
https://drive.google.com/open?id=1tGuu5Y6Qfo5baHjEO_-tJ3irXAXIWa53
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Albanheraibi said:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Click to expand...
Click to collapse
Erecovery has started working for some people. you can try that
mrmazak said:
Erecovery has started working for some people. you can try that
Click to expand...
Click to collapse
Nope .. nothing work ..
Anyone know how to unbrick ? ..
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Albanheraibi said:
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Click to expand...
Click to collapse
Shouldn't be, at least not from that, not completely.
Was this the first condition, or an added problem?
I think best thing to try is the service ROM.
This one is BND-L21C432..
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.. If this is not the correct version for your honor 7x
Now with dc phoenix i have restore the fastboot and the erecovery, i can flash all i want but nothing happens, just boot loop at "your phone is not trusted" screen.
I was on catuva's rom before brick and now i have the catuva splashboot screen even after full firmware retore by dc phoenix.
When i try to flash in twrp i see lot of errors related to partition table (invalid argument cust, odm, sytsem etc) it seems the partition table have a problem..
The DLOAD can restore this ?
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Albanheraibi said:
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Click to expand...
Click to collapse
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
mrmazak said:
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
Click to expand...
Click to collapse
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Albanheraibi said:
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Click to expand...
Click to collapse
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
mrmazak said:
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
Click to expand...
Click to collapse
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Albanheraibi said:
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Click to expand...
Click to collapse
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
mrmazak said:
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
Click to expand...
Click to collapse
Ok after update with hurupdater via twrp (he flashed the correct radio.img file) the phone have income from death !
Thank you for trying to help me !
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Did you got the solution? Please help me!!!!!!!
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Hi,
I have the same problem.
Any chance you could share the method of how you managed to connect otg to transfer the ozip file? I also only have access to stock recovery and the fastboot mode.
I have the stock rom in zip file version which i am absolutely certain works because i have used it before but i can't install a custom recovery no matter what i try.
If possible could you also share the ozip file and the odp file?
Thank You!
I just wrote unbrick instruction here:
[GUIDE] [RMX1901] Unbrick & Install Android 13 Custom ROM
The guide is for a Chinese version of the phone. But might give you an idea for the global version. History: I was on the latest official ROM. But I was already unlocked the boot. Then I tried to install a custom ROM and failed. Because TWRP for...
forum.xda-developers.com
And you could find some information that I found from there.