Develop Bugs

[Rom][5.1.1]FLYME OS redmi note 2 / prime

XIAOMI REDMI NOTE 2 / PRIME
FLYME OS 4.5.4.5 MULTILANGUAGE
Code:
*** Disclaimer
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research and read my tutorials and instructions carefully.
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will ignore it.
*/.
Known bugs:
--google sync takes long to sync..better first export your contacts to your SD CARD and import in this rom.
--fm radio
INSTRUCTION TO INSTALL :
1. You must have ROOT and TWRP any version will work
2. Enter TWRP > Advanced Wipe > System, Data, Cache, Dalvik Cache > wipe.
3. Restart to Recovery and go straight to Install > select the ROM > install.
4.reboot
5-if you dont have root flash this:https://download.chainfire.eu/696/SuperSU/
DOWNLOADS:
http://smokermanxda.blogspot.pt/2016/03/flyme-os-redmi-note-2-prime.html
IF YOU LIKE MY WORK PLEASE CONSIDER A SMALL DONATION.
Click to expand...
Click to collapse
GPL:
The kernel included in this ROM is stock 5.1.1 with modifications to boot the rom.
ROM OS Version: 5.1.1
ROM Kernel: Linux 3.4.X
Version Information
Status: STABLE
Stable Release Date: 2016-03-28
Created 2015-12-01
Last Updated 2016-03-27
Click to expand...
Click to collapse
F.A.Q
a)can i flash this with TWRP even if i have MIUI 7?
-yes, just follow my installation instructions!!
b) i didnt like it and i want to go back to MIUI 7, how i do it?
-easy..just enter TWRP , make all wipes and restore your MIUI 7 rom or any other
Click to expand...
Click to collapse
CREDITS: vova.vafin, Breathe of fate , Raul,smokermanXDA,
.
original download thread here:https://multirom.me/index.php?m=app&a=view&id=5&app=roms

Can second sim use 4g/3g?
Sent from my Redmi Note 2 using Tapatalk

Good to see new ROM for RMN2

jerryshaw12 said:
Can second sim use 4g/3g?
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
you clearly miss my video preview of the rom..

Does xposed work on it and if so, which file do I need to install?

xposed works fine. (use xposed for cm12.1, search any redmi note 2 cm/moke thread).
can this flyme os use volume button to wake up the device ?
already use gravity box and even flymetools, not working.

I am using this rom and it has been very good and stable. However, I wanted to know if it possible to change the default homescreen page? How do I move the page. I do not want it between page A and page B.
Also thanks for the rom!

bilal002 said:
I am using this rom and it has been very good and stable. However, I wanted to know if it possible to change the default homescreen page? How do I move the page. I do not want it between page A and page B.
Also thanks for the rom!
Click to expand...
Click to collapse
that is how this launcher works..cant make any change on that..just delete all the things on A or move it to B..you still gonna have 2 pages..default and A..if you prefer use NOVA or APEX..

Hello. I have a question regarding the camera. In the settings why does it said 10 MP?
Sent from my Redmi Note 2 using XDA-Developers mobile app

fercaloandrei said:
Hello. I have a question regarding the camera. In the settings why does it said 10 MP?
Sent from my Redmi Note 2 using XDA-Developers mobile app
Click to expand...
Click to collapse
if you use fullscreen it says 10..it use default its 13 .. dont mind the values..just see the quality that is very good!:good:

Is the Gapps included in this ROM.........???

Do you know of it's possible to remap the hardware buttons? I would like to make them work as miui but it doesn't work with gravitybox.
Sent from my Redmi Note 2 using XDA-Developers mobile app

fercaloandrei said:
Do you know of it's possible to remap the hardware buttons? I would like to make them work as miui but it doesn't work with gravitybox.
Sent from my Redmi Note 2 using XDA-Developers mobile app
Click to expand...
Click to collapse
Use Xposed Additions.

no just install download from playstore the button remaper works fine foe me

It's a nice ROM. But, where is the stock mail app? Bcause i usually use it for exchange account.
And also, can we log in to Flyme Account?

for mail i use gmail that now supports exchange also..i have my hotmail and gmail account together..i have a flyme account for themes as i say in the video , but i dont use it for anything else..gapps are included..

Sir, can you please fix "CaptivePortalLogin"? Cause its always crash when i tried to connect to my college wifi *sorry for my bad english

Hi,
I tried to install this ROM but failed.
In TWRP log was written "updater process ended with error: 7".
What is the reason for his?
This is what I did:
1. Entered TWRP > Wipe > Advanced Wipe > selected System, Data, Cache, Dalvik/ART Cache.
2. Install > selected the ROM > swipe to install > got error "updater process ended with error: 7".
I'm using TWRP version 3.0.2.-1.
I used Xposed also with my MIUI. Does this has anything to do with this error?
Here is the link to my log if it helps.
http://www.filedropper.com/recovery_2
Thanks

Just install once again without wiping and it will work.

lesa84 said:
Just install once again without wiping and it will work.
Click to expand...
Click to collapse
Are you sure this will help??
So you mean I try installing and after I get an error I just repeat the installation but without wiping?

[ROM][10][C103/C106] [Pixel-Experience-20200312-1929-UNOFFICIAL] [TWRP]- PIXEL AOSP

Android 10 Pixel Experience ROM with latest march android security patch. Most stable as far as i'm concered compared to other custom ROM's.
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What is this? Pixel Experience is an AOSP based ROM, with Google Pico packages installed. Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device Based on Android 10.0
Why this ROM? I have tried many rom's to cool 1 over many the period of many years and most of the ROM are not stable I have had problems mainly with speaker and network ie LTE was not working since I have recovered the phone from a brick. This ROM is currently the best and stable ROM in android 10 with doesn't need any patches for sound. Sound work automatically with this ROM. For users who wants to stay at Android 9 - The most stable ROM is Evolution X.
How to get this ROM? You need to flash the custom recovery on your existing TWRP or any Custom recovery as this pixel ROM needs the updated Recovery img so that it doesn't throw Error 7 while flashing this ROM. Installing this ROM is pretty straight forward, Wipe everything including Internal Storage and format data and force disable the encryption. Flash the Custom recovery .img file in exisitng TWRP and Flash the ROM + GCam Camera Fix. Users won't facing sound problem can flash the sound patch.
What's fixed in this ROM? Fixed all media errors, crashes and instability. Fixed camera operation. Other changes under the hood. Sound working fine without any patch. Network stability is good.
INSTRUCTIONS with Images:
Reboot to recovery
Take a backup - Must
Wipe everything including internal storage ie Dalvik, System, Cache, Data, Internal Storage
Download the custom recovery .img file and flash the .img file as install image
Reboot to new recovery again.
Flash the Pixel ROM and Camera Fix patch
Camera works after the first reboot.
Users who still faces sound problem can patch the sound fix patch
What's working?
Boots
Camera
Sound
Wifi
Calls, Messages, Data
Voice Recordings
Flash
Auto Rotate
Bluetooth
Google Voice Recognition
Google services
Fingerprint
Vibration
Sensors
LTE
Known Issues
Battery indicator not working when phone is off
DON'T FLASH GAPPS, ALREADY INCLUDED
Android Version : 10.0
Security Patch : 5 March 2020
Google Play System Update: 10
kernel version : 3.10.108-ineageos
Build number: 10.0-20200312-1929
Status : Stable
I will update if i face any problem in future.
Link to ROM files and Custom Recovery
Gdrive Link, As of many requests sometimes google doesn't let you download the files, make a copy to your drive and then download.
What's Included?
TWRP RECOVERY
CUSTOM RECOVERY .IMG
Pixel Experience ROM
Camera Fix patch.zip
Gcam Apk
Sound fix patch.zip
MiFlash
IMAGES : ROM INSTALLATION AND ROM UI PICTURES

So you think this ROM is better than LineageOS 17.1 in terms of stability, battery life and generaly speed?

The ROM stability is good than LineageOS 17.1, I have tried Lineageos 17.1 isn't happy about the stability and hence decided to reflash the pixel ROM. Pixel works fine the battery is stable and better than the rom i have tried over many months. I had tried LineageOS 17.1 and had issues with fingerprint and adaptive brightness. The Charging indicator light doesn't work while charging in lineagesOS 17.1,
A little bit about the Pixel 10 firmware. which was noticed during this short time, autonomous on average 10 percent of the charge per hour of screen time, when charging, the charge indicator lights up from yellow to green during notifications, the indicator blinks blue, YouTube, VK, OK applications work stable, I made video calls on Watts App, VK ,, Ok, I will update if i find any issues in the Pixel ROM.

MasterChief2 said:
So you think this ROM is better than LineageOS 17.1 in terms of stability, battery life and generaly speed?
Click to expand...
Click to collapse
Here is the link to LOS 17.1 ROM.

Fingerprint doesn't work
Hi,
Few roms ago my fingerprint sensor stopped working. In your rom its is still broken. When trying to add fingerprint touching sensor gives no feedback. Any ideas how to fix it?

I was using PixelExperience and ROM is great but there are some problems. When you start using device you can notice that device is getting warm under your hands and after some time device gets so warm that cpu starts throttling and as a result of that, system start to slowdownc sytem UI is crashing and similar things to that. Except this problem everything else works great (notifications, gestures, battery, gcam, etc.).
Also I tried LineageOS 17.1 and on that ROM everything works great except notifications. Hovever, there are some patches that needs to be applied in order to get sound, remote control, and LED light working. All that you can find on 4PDA forum. The only problem I have with this ROM is notifications. When I'm using phone notifications works fine but when display is turned off messages from viber, whatsapp etc. are being delayed for about 30 to 60 seconds, and sometimes SMS won't show up as long as display is powered off and phone is locked.
Qunetal said:
Hi,
Few roms ago my fingerprint sensor stopped working. In your rom its is still broken. When trying to add fingerprint touching sensor gives no feedback. Any ideas how to fix it?
Click to expand...
Click to collapse
Something is wrong with your fingerprint. On my Cool1 fingerprint works on PixelExperience and LineageOS.

Starting from JUI 7.1.1 V.13.2 CUOCO92 Rom
I almost bricked my phone starting from JUI 7.1.1 and TWRP 3.2.1-3 by geoanto555 and trying to install the recovery.img attached (file= TWRP_VENDOR1.img).
Please show me what I wrong and the correct steps for upgrading from JUI 7.1.1 to your Android 10 Rom.
Thank you.
Luigi

Albireo54 said:
I almost bricked my phone starting from JUI 7.1.1 and TWRP 3.2.1-3 by geoanto555 and trying to install the recovery.img attached (file= TWRP_VENDOR1.img).
Please show me what I wrong and the correct steps for upgrading from JUI 7.1.1 to your Android 10 Rom.
Thank you.
Luigi
Click to expand...
Click to collapse
You must be on EUI in order to be able to install Android 8.0+. Here is link how to upgrade to newer Android if you are on JUI ROM:
https://forum.xda-developers.com/cool1/how-to/guide-complete-guide-to-upgrade-to-t3954064

MasterChief2 said:
You must be on EUI in order to be able to install Android 8.0+. Here is link how to upgrade to newer Android if you are on JUI ROM:
https://forum.xda-developers.com/cool1/how-to/guide-complete-guide-to-upgrade-to-t3954064
Click to expand...
Click to collapse
Thank you very much, I am not able to download the Coolpad keys for Assistant (fine not found err. 404) and the Cuoco92 TWRP 3.1.0 (same reason); please would you like to send this file or post a valid link ?
Another question: if I am already in Android 9/10 and I would like to test different Android 9/10 roms I always have to go back to EUI before flashing new A9/10 roms ?
Thank you again

Albireo54 said:
Thank you very much, I am not able to download the Coolpad keys for Assistant (fine not found err. 404) and the Cuoco92 TWRP 3.1.0 (same reason); please would you like to send this file or post a valid link ?
Another question: if I am already in Android 9/10 and I would like to test different Android 9/10 roms I always have to go back to EUI before flashing new A9/10 roms ?
Thank you again
Click to expand...
Click to collapse
You need to register on 4PDA forum. No, you don't need to go back on EUI everytime. When you're back on EUI with TWRP before flashing ROM always do full wipe (Wipe Everything + Format Data)

MasterChief2 said:
You need to register on 4PDA forum. No, you don't need to go back on EUI everytime. When you're back on EUI with TWRP before flashing ROM always do full wipe (Wipe Everything + Format Data)
Click to expand...
Click to collapse
It was a bit tricky but finally I get registered on 4PDA forum and I downloaded the Coolpad Assistant keys. Thank you :good:

I have a problem. During the first start I have to do the access with an account Google. I insert the credentials of my account and it notifies me that the smartphone has been reset and so I have to do the access with an account Google already synchronized with the smartphone. I have tried to do a wipe data+cache but I don't have solved it.

Pixel 10 copo 1 c103
A ROM é bastante agradável, só tenho problema ao gravar vídeos a câmera está escura,.

Hi, i installed this rom today and only one issue...tactil buttons dont works. I put 3 virtual buttons from the configuration of android and now i am looking for a solution for the tactil buttons.
PD: If u have problems with MiFlash just power off ur phone, hold up volumen button and down volumen button and plug usb to PC. If it works a red light still off and on all time, then MiFlash reconigzed phone.

For anyone who is interested: this ROM works perfectly on a Leree Le 3.
After flashing (and sweaty moments because of the flashing red light) it identifies as C106.
Sirase said:
Hi, i installed this rom today and only one issue...tactil buttons dont works. I put 3 virtual buttons from the configuration of android and now i am looking for a solution for the tactil buttons.
PD: If u have problems with MiFlash just power off ur phone, hold up volumen button and down volumen button and plug usb to PC. If it works a red light still off and on all time, then MiFlash reconigzed phone.
Click to expand...
Click to collapse
You can change the 'on-screen buttons' to tactile buttons in Settings -> System -> Buttons.

erica butson said:
Android 10 Pixel Experience ROM with latest march android security patch. Most stable as far as i'm concered compared to other custom ROM's.
What is this? Pixel Experience is an AOSP based ROM, with Google Pico packages installed. Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device Based on Android 10.0
Why this ROM? I have tried many rom's to cool 1 over many the period of many years and most of the ROM are not stable I have had problems mainly with speaker and network ie LTE was not working since I have recovered the phone from a brick. This ROM is currently the best and stable ROM in android 10 with doesn't need any patches for sound. Sound work automatically with this ROM. For users who wants to stay at Android 9 - The most stable ROM is Evolution X.
How to get this ROM? You need to flash the custom recovery on your existing TWRP or any Custom recovery as this pixel ROM needs the updated Recovery img so that it doesn't throw Error 7 while flashing this ROM. Installing this ROM is pretty straight forward, Wipe everything including Internal Storage and format data and force disable the encryption. Flash the Custom recovery .img file in exisitng TWRP and Flash the ROM + GCam Camera Fix. Users won't facing sound problem can flash the sound patch.
What's fixed in this ROM? Fixed all media errors, crashes and instability. Fixed camera operation. Other changes under the hood. Sound working fine without any patch. Network stability is good.
INSTRUCTIONS with Images:
Reboot to recovery
Take a backup - Must
Wipe everything including internal storage ie Dalvik, System, Cache, Data, Internal Storage
Download the custom recovery .img file and flash the .img file as install image
Reboot to new recovery again.
Flash the Pixel ROM and Camera Fix patch
Camera works after the first reboot.
Users who still faces sound problem can patch the sound fix patch
What's working?
Boots
Camera
Sound
Wifi
Calls, Messages, Data
Voice Recordings
Flash
Auto Rotate
Bluetooth
Google Voice Recognition
Google services
Fingerprint
Vibration
Sensors
LTE
Known Issues
Battery indicator not working when phone is off
DON'T FLASH GAPPS, ALREADY INCLUDED
Android Version : 10.0
Security Patch : 5 March 2020
Google Play System Update: 10
kernel version : 3.10.108-ineageos
Build number: 10.0-20200312-1929
Status : Stable
I will update if i face any problem in future.
Link to ROM files and Custom Recovery
Gdrive Link, As of many requests sometimes google doesn't let you download the files, make a copy to your drive and then download.
What's Included?
TWRP RECOVERY
CUSTOM RECOVERY .IMG
Pixel Experience ROM
Camera Fix patch.zip
Gcam Apk
Sound fix patch.zip
MiFlash
IMAGES : ROM INSTALLATION AND ROM UI PICTURES
Click to expand...
Click to collapse
Hey, i was able to find some bugs in this rom.... The sound has some bugs in it... It sometimes redirect the sound through earpiece while vice versa sometimes.... In some cases, the camera fails to open nd mi sound enhancer doesn't even open. Headphone mic not working in this rom nd whenever i press the switches on hesdphones to cjane track etc. It opens up Google assistant instead of changing the track. Speaker sounds tinny. Hope you'd patch these issues ASAP. this is my daily driver phone nd these issues concern me a lot.... P.S: phone heats up more than usual nd the battry drains a lot quiker now... Hope you'd fix these soon

Qunetal said:
Hi,
Few roms ago my fingerprint sensor stopped working. In your rom its is still broken. When trying to add fingerprint touching sensor gives no feedback. Any ideas how to fix it?
Click to expand...
Click to collapse
Try going back to suck rom nd then reflash this one... Worked out for me
---------- Post added at 02:13 PM ---------- Previous post was at 02:12 PM ----------
Albireo54 said:
Thank you very much, I am not able to download the Coolpad keys for Assistant (fine not found err. 404) and the Cuoco92 TWRP 3.1.0 (same reason); please would you like to send this file or post a valid link ?
Another question: if I am already in Android 9/10 and I would like to test different Android 9/10 roms I always have to go back to EUI before flashing new A9/10 roms ?
Thank you again
Click to expand...
Click to collapse
Nope
Just wipe system dalvik cache nd data nd then flash the new one

erica butson said:
Android 10 Pixel Experience ROM with latest march android security patch. Most stable as far as i'm concered compared to other custom ROM's.
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What is this? Pixel Experience is an AOSP based ROM, with Google Pico packages installed. Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device Based on Android 10.0
Why this ROM? I have tried many rom's to cool 1 over many the period of many years and most of the ROM are not stable I have had problems mainly with speaker and network ie LTE was not working since I have recovered the phone from a brick. This ROM is currently the best and stable ROM in android 10 with doesn't need any patches for sound. Sound work automatically with this ROM. For users who wants to stay at Android 9 - The most stable ROM is Evolution X.
How to get this ROM? You need to flash the custom recovery on your existing TWRP or any Custom recovery as this pixel ROM needs the updated Recovery img so that it doesn't throw Error 7 while flashing this ROM. Installing this ROM is pretty straight forward, Wipe everything including Internal Storage and format data and force disable the encryption. Flash the Custom recovery .img file in exisitng TWRP and Flash the ROM + GCam Camera Fix. Users won't facing sound problem can flash the sound patch.
What's fixed in this ROM? Fixed all media errors, crashes and instability. Fixed camera operation. Other changes under the hood. Sound working fine without any patch. Network stability is good.
INSTRUCTIONS with Images:
Reboot to recovery
Take a backup - Must
Wipe everything including internal storage ie Dalvik, System, Cache, Data, Internal Storage
Download the custom recovery .img file and flash the .img file as install image
Reboot to new recovery again.
Flash the Pixel ROM and Camera Fix patch
Camera works after the first reboot.
Users who still faces sound problem can patch the sound fix patch
What's working?
Boots
Camera
Sound
Wifi
Calls, Messages, Data
Voice Recordings
Flash
Auto Rotate
Bluetooth
Google Voice Recognition
Google services
Fingerprint
Vibration
Sensors
LTE
Known Issues
Battery indicator not working when phone is off
DON'T FLASH GAPPS, ALREADY INCLUDED
Android Version : 10.0
Security Patch : 5 March 2020
Google Play System Update: 10
kernel version : 3.10.108-ineageos
Build number: 10.0-20200312-1929
Status : Stable
I will update if i face any problem in future.
Link to ROM files and Custom Recovery
Gdrive Link, As of many requests sometimes google doesn't let you download the files, make a copy to your drive and then download.
What's Included?
TWRP RECOVERY
CUSTOM RECOVERY .IMG
Pixel Experience ROM
Camera Fix patch.zip
Gcam Apk
Sound fix patch.zip
MiFlash
IMAGES : ROM INSTALLATION AND ROM UI PICTURES
Click to expand...
Click to collapse
erica butson said:
Android 10 Pixel Experience ROM with latest march android security patch. Most stable as far as i'm concered compared to other custom ROM's.
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What is this? Pixel Experience is an AOSP based ROM, with Google Pico packages installed. Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device Based on Android 10.0
Why this ROM? I have tried many rom's to cool 1 over many the period of many years and most of the ROM are not stable I have had problems mainly with speaker and network ie LTE was not working since I have recovered the phone from a brick. This ROM is currently the best and stable ROM in android 10 with doesn't need any patches for sound. Sound work automatically with this ROM. For users who wants to stay at Android 9 - The most stable ROM is Evolution X.
How to get this ROM? You need to flash the custom recovery on your existing TWRP or any Custom recovery as this pixel ROM needs the updated Recovery img so that it doesn't throw Error 7 while flashing this ROM. Installing this ROM is pretty straight forward, Wipe everything including Internal Storage and format data and force disable the encryption. Flash the Custom recovery .img file in exisitng TWRP and Flash the ROM + GCam Camera Fix. Users won't facing sound problem can flash the sound patch.
What's fixed in this ROM? Fixed all media errors, crashes and instability. Fixed camera operation. Other changes under the hood. Sound working fine without any patch. Network stability is good.
INSTRUCTIONS with Images:
Reboot to recovery
Take a backup - Must
Wipe everything including internal storage ie Dalvik, System, Cache, Data, Internal Storage
Download the custom recovery .img file and flash the .img file as install image
Reboot to new recovery again.
Flash the Pixel ROM and Camera Fix patch
Camera works after the first reboot.
Users who still faces sound problem can patch the sound fix patch
What's working?
Boots
Camera
Sound
Wifi
Calls, Messages, Data
Voice Recordings
Flash
Auto Rotate
Bluetooth
Google Voice Recognition
Google services
Fingerprint
Vibration
Sensors
LTE
Known Issues
Battery indicator not working when phone is off
DON'T FLASH GAPPS, ALREADY INCLUDED
Android Version : 10.0
Security Patch : 5 March 2020
Google Play System Update: 10
kernel version : 3.10.108-ineageos
Build number: 10.0-20200312-1929
Status : Stable
I will update if i face any problem in future.
Link to ROM files and Custom Recovery
Gdrive Link, As of many requests sometimes google doesn't let you download the files, make a copy to your drive and then download.
What's Included?
TWRP RECOVERY
CUSTOM RECOVERY .IMG
Pixel Experience ROM
Camera Fix patch.zip
Gcam Apk
Sound fix patch.zip
MiFlash
IMAGES : ROM INSTALLATION AND ROM UI PICTURES
Click to expand...
Click to collapse
Good job Erica,b thankyou.
I've found that setting limitations for background activities to Pixel Suggest the phone doesn't warm .

IR BLASTER NOT WORKING
i got an error on LE remote control saids "unable to initialize"
how to fix this?

I installed this rom everything is working fine except IR blaster and one issue is that while I am taking video from google camera my mobile screen becomes dark, camera brightness becomes near to zero. But this issue only occur for Google camera, other camera app works fine...
Is there any way to fix this and why this is happening.

Serious Battery Drained issue

Hi Guys,
I have redmi note 8
Mui global 12.0.2 stable
Android 10
This phone has insane battery drained issue.
I turned off the phone while charging. After charging to 100 percent, i keep the phone turned off. What insane thing is the phone keeps warm in "shutdown" mode.
Two hours later I turn on the phone, the battery drained to 72 percent.
Then I let it idle at my house because i go outside cyling for two hours.
When I got back home, I check again, the battery got drain to 50 percent in idle mode.
FYI, I already did factory reset for this phone. The battery drained still occured in rapid state.
I have not do any root for this phone.
Rgiht now, the software i installed are kakao talk and whatsapp, I have to install this for communication purposes.
Please advise how to solve this issue.
Note : I have similiar issue with my redmi note 4x mediatec, charging 100 percent, battery drained to 0 percent in 10 minutes, without do anything.
That is why I trade in that redmi note 4x to get this redmi note 8.
Now the same battery drained issue affected my redmi note 8.

satria150 said:
Hi Guys,
I have redmi note 8
Mui global 12.0.2 stable
Android 10
This phone has insane battery drained issue.
I turned off the phone while charging. After charging to 100 percent, i keep the phone turned off. What insane thing is the phone keeps warm in "shutdown" mode.
Two hours later I turn on the phone, the battery drained to 72 percent.
Then I let it idle at my house because i go outside cyling for two hours.
When I got back home, I check again, the battery got drain to 50 percent in idle mode.
FYI, I already did factory reset for this phone. The battery drained still occured in rapid state.
I have not do any root for this phone.
Rgiht now, the software i installed are kakao talk and whatsapp, I have to install this for communication purposes.
Please advise how to solve this issue.
Note : I have similiar issue with my redmi note 4x mediatec, charging 100 percent, battery drained to 0 percent in 10 minutes, without do anything.
That is why I trade in that redmi note 4x to get this redmi note 8.
Now the same battery drained issue affected my redmi note 8.
Click to expand...
Click to collapse
charging to 100% is already a mistake ...
but that is not the problem here
do you use the same charger for both devices ?
what kernel do you use ?
battery saving mode activated ?

loopypalm said:
charging to 100% is already a mistake ...
but that is not the problem here
do you use the same charger for both devices ?
what kernel do you use ?
battery saving mode activated ?
Click to expand...
Click to collapse
I usually charge only at 80 percent. but since this battery drained issue, i charge 100 percent. i turn it off. i sleep. tomorrow morning when i woke up, i turn on the phone. the battery is already drained to 40 percent left.
Redmi note 4x is already sold. i use the money to buy this redmi note 8.
kernel ? How to check ?
Battery saving mode activated but it does woork any good.
I am planning to downgrade to miui 11. this miui 12.0.2.0 is a disaster for me.
It will ruined my battery. I do not want to buy another again. but this things happened.

satria150 said:
i turn it off. i sleep. when i woke up,the battery is 40 percent.
Click to expand...
Click to collapse
this means it didn't shutdown imediatly
some (****ui) services keep runing even if the screen is off
(the phone consumption of battery when powered off is minimal)
satria150 said:
I am planning to downgrade to miui 11. this miui 12.0.2.0 is a disaster for me.
Click to expand...
Click to collapse
All miui are trash tbh , i think you should use a custom rom

loopypalm said:
this means it didn't shutdown imediatly
some (****ui) services keep runing even if the screen is off
(the phone consumption of battery when powered off is minimal)
All miui are trash tbh , i think you should use a custom rom
Click to expand...
Click to collapse
any recomendation for custom roms ? i need custom rom with long battery life. light recources. so many custom rom to picks.
I am just requesting unlock bootloader using miunlock.
Need to wait a week from now.

satria150 said:
any recomendation for custom roms ? i need custom rom with long battery life. light recources. so many custom rom to picks.
I am just requesting unlock bootloader using miunlock.
Need to wait a week from now.
Click to expand...
Click to collapse
All Custom roms have pretty much the same battery usage (it mostly depend on you)
and the worst is still better than miui ...
my recomendation are :
1-RRos
2-AEX 7.3
3-MSM Extended 12.5
4-Superior OS
(All A10)
Clean flash and use "Sixteen kernel"

loopypalm said:
All Custom roms have pretty much the same battery usage (it mostly depend on you)
and the worst is still better than miui ...
my recomendation are :
1-RRos
2-AEX 7.3
3-MSM Extended 12.5
4-Superior OS
(All A10)
Clean flash and use "Sixteen kernel"
Click to expand...
Click to collapse
hi loopypalm,
Could you give direct links for each of your recomendation ?

satria150 said:
hi loopypalm,
Could you give direct links for each of your recomendation ?
Click to expand...
Click to collapse
everything is available in this forum or in the rom homepage
do some work

loopypalm said:
everything is available in this forum or in the rom homepage
do some work
Click to expand...
Click to collapse
1-RRos
did u mean this ?
https://sourceforge.net/projects/resurrectionremix-ten/files/ginkgo/RROS-Q-8.6.5-20201211-ginkgo-Official.zip/download
2-AEX 7.3
Is this the one ?
[DEAD] [ROM] [Q] [Unofficial] AOSP Extended 7.3
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
3-MSM Extended 12.5
I do not see this version on the forum, or i may missed something. Please help me out.
4-Superior OS
is this the one ?
[10.0][ROM] Superior OS [Phoenix][OFFICIAL][ginkgo][19/07/2020]
About US: Superior OS is a AOSP based custom ROM with some minimal features to fulfill the users demands nowadays. * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs...
forum.xda-developers.com

satria150 said:
1-RRos
did u mean this ?
https://sourceforge.net/projects/resurrectionremix-ten/files/ginkgo/RROS-Q-8.6.5-20201211-ginkgo-Official.zip/download
2-AEX 7.3
Is this the one ?
[DEAD] [ROM] [Q] [Unofficial] AOSP Extended 7.3
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
3-MSM Extended 12.5
I do not see this version on the forum, or i may missed something. Please help me out.
4-Superior OS
is this the one ?
[10.0][ROM] Superior OS [Phoenix][OFFICIAL][ginkgo][19/07/2020]
About US: Superior OS is a AOSP based custom ROM with some minimal features to fulfill the users demands nowadays. * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs...
forum.xda-developers.com
Click to expand...
Click to collapse
RRos
AEX
MSM XQ
Superior

Hi Loopypalm,
I unlocked my rn8, finally.
Then I install twrp 3.5.2_9-1
also Magisk-v21.4
But I failed to install
no-verity-opt-encrypt-6.1
Now, I want to install your recommendation custom rom
RROS-Q-8.7.3-20210923-ginkgo-Milestone
Should i just install this rom via twrp or do i need to download more files like the latest OpenGapps package ?
like this one ?
NikGapps-infernom111-arm64-11-20211010-signed.zip (489.8 MB)
or opengapps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please advise which platform, android 10, and variant to choose
I am planning to install this custom rom today
Waiting for reply with best regards

satria150 said:
Hi Loopypalm,
I unlocked my rn8, finally.
Then I install twrp 3.5.2_9-1
also Magisk-v21.4
But I failed to install
no-verity-opt-encrypt-6.1
Now, I want to install your recommendation custom rom
RROS-Q-8.7.3-20210923-ginkgo-Milestone
Should i just install this rom via twrp or do i need to download more files like the latest OpenGapps package ?
like this one ?
NikGapps-infernom111-arm64-11-20211010-signed.zip (489.8 MB)
or opengapps
View attachment 5430333
Please advise which platform, android 10, and variant to choose
I am planning to install this custom rom today
Waiting for reply with best regards
Click to expand...
Click to collapse
Why you installed magisk before the rom ?
and why no-verity-opt ?
follow the clean flash steps
if you really need gapps use NikGapps core (flash after the rom)

loopypalm said:
Why you installed magisk before the rom ?
and why no-verity-opt ?
follow the clean flash steps
if you really need gapps use NikGapps core (flash after the rom)
Click to expand...
Click to collapse
Ok, i repeat again the process
please follow instruction and do not add/remove a step
-ftwrp 3.5.2_9-1 (already installed)
-reboot to twrp recovery
-format data (not wipe) (this will erase internal storage!)
-wipe 5 (cache/dalvik/system/vendor/data)
-flash the rom you want - RROS-Q-8.7.3-20210923-ginkgo-Milestone
-flash kernel (if you have any) - i have no idea about this
-flash Magisk-v21.4
-flash DFE
-reboot to system
just realize, this rom has no playstore.
back to twrp
flash NikGapps-core-arm64-10-20210918-signed
Reboot system
install whatapp
have to allow all the permissions
install kakaotalk
have to allow all the permissions
Done for now, let's see if this custome drain my battery worse than mui or not.
Anyway, how do u charge your battery to make it last longer ?
I am trying to charge if the battery goes down under 20 percent and will stop charging above 81 percent.
Is this correct method or u have better opinion ?

satria150 said:
-ftwrp 3.5.2_9-1 (already installed)
-reboot to twrp recovery
Click to expand...
Click to collapse
-OrangeFox is a better recovery
satria150 said:
Anyway, how do u charge your battery to make it last longer ?
Click to expand...
Click to collapse
-normal users use battery saver under settings/battery
-advanced users debloat the system ...
satria150 said:
I am trying to charge if the battery goes down under 20 percent and will stop charging above 81 percent.
Click to expand...
Click to collapse
stop at 79 or 80%
you can set it in :
settings/RRtools/Misc.../Charging

loopypalm said:
-OrangeFox is a better recovery
-normal users use battery saver under settings/battery
-advanced users debloat the system ...
stop at 79 or 80%
you can set it in :
settings/RRtools/Misc.../Charging
Click to expand...
Click to collapse
Hi loopypalm,
I use this custom rom for the past two days.
Battery drained still occured.
I charge 100 percent. smartphone turned off.
I use xiaomi fast charger from redmi note 8 pro (belongs to my cousin)
After 100 percent I unplug the charger and I let it off for 15 - 20 minutes.
When i turned on the smartphone, the battery is already decreased to 74 percent (while the smartphone sleeps)
When I type this reply on my laptop, the battery decreased again to 71 percent (idle, do nothing)
I only install, whatsapp and kakaotalk for working purposes (communicating with my team and others)
I will installed orange recovery using twrp
then, I'm planning to install other custom rom which is
MiuiLiteCNRedefined_12.5.2_A11
Android: 11
MIUI: 12.5.2 Enhanced
Accoring to this topic:
[ROM][A11][MIUI 12.0.2][Official] MiuiLite Minimal aka Debloated
MiuiLite Minimal aka Debloated Official Before reading, you must read this * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). * Please do some...
forum.xda-developers.com
I have to do this:
How to flash rom
WIPE
-Cache/Dalvik
-System
-Data
-Vendor
INSTALL
-Flash rom zip
-Magisk zip (optional)
-Dmverity zip (decrypted devices)
-Vbmeta zip
-Reboot
-Done
how to check if i have decrypted or encrypted devices ?

satria150 said:
I use this custom rom for the past two days.
Battery drained still occured.
Click to expand...
Click to collapse
if you have this problem in RR this mean that's a battery hardware problem
look for a battery replacment ...
satria150 said:
then, I'm planning to install other custom rom which is
MiuiLiteCNRedefined_12.5.2_A11
Click to expand...
Click to collapse
the problem is not the rom ...
satria150 said:
how to check if i have decrypted or encrypted devices ?
Click to expand...
Click to collapse
If you want to stay encrypted = do nothing (A11 are not very stable encrypted)
If you want to decrypt = Install DFE
(Clean flash steps are the same for all roms)

loopypalm said:
if you have this problem in RR this mean that's a battery hardware problem
look for a battery replacment ...
the problem is not the rom ...
If you want to stay encrypted = do nothing (A11 are not very stable encrypted)
If you want to decrypt = Install DFE
(Clean flash steps are the same for all roms)
Click to expand...
Click to collapse
Hi Loopypalm,
I do not know what is going on with my cellphone.
I just remove MiuiLiteCNRedefined_12.5.2_A11 using orangefox and reinstall
miui_GINKGOIDGlobal_V10.3.2.0.PCOIDXM_f2b4961dd5_9.0 using orangefox
1st try I just using two steps
INSTALL
-Flash rom zip
-Magisk zip (optional)
But when i rebbot the system, it went back to orange fox. So I did full steps below
INSTALL
-Flash rom zip
-Magisk zip (optional)
-Dmverity zip (decrypted devices)
-Vbmeta zip
-Reboot
-Done
It boots normally.
But the phone temperature is really hot like an iron that connected to electricirty, even I use the silicon case.
What shoul I do ?
I want my life back
I am sure there's a battery bug in my RN8.
I want to format my RN8 and starts as new phone.
Can miflash do this kind of job ?

satria150 said:
But the phone temperature is really hot
Click to expand...
Click to collapse
because miui is trash
satria150 said:
I want to format my RN8 and starts as new phone.
Click to expand...
Click to collapse
if you followed the clean flash instruction on RRos = that's the best you can get
Other than that is worst
satria150 said:
Can miflash do this kind of job ?
Click to expand...
Click to collapse
i already said it is a battery hardware problem and can't be fixed with software
you can try but don't relock the bootloader and keep the custom recovery ...

loopypalm said:
because miui is trash
if you followed the clean flash instruction on RRos = that's the best you can get
Other than that is worst
i already said it is a battery hardware problem and can't be fixed with software
you can try but don't relock the bootloader and keep the custom recovery ...
Click to expand...
Click to collapse
You were right, I just open the silicon case, the back smartphone case already bent because the force made by the broken battery.
This is the 1st time I experience broken battery of xiaomi smartphone like this. Gonna find a new battery soon.

satria150 said:
This is the 1st time I experience broken battery of xiaomi smartphone like this
Click to expand...
Click to collapse
this is not xiaomi specific , it can happen to any phone if you don't know how to take care of it
bad charger/variable amperage/bad cable/bad kernel/charge over 80%/using while charging ...
lot of factor can cause it ...

[ROM][UNOFFICIAL][PORT] LineageOS 13.0 for Lenovo A1000

LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github Repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Device-specific source code:
Kernel source: https://github.com/Lehkeda/kernel_lenovo_sp7731ge
Downloads:
ROM: https://drive.google.com/file/d/1F_dTLQGIspPb4LI8jNmnrE-iVovkSaKa/view?usp=sharing
Gapps: http://opengapps.org
Extras (su or Weather Provider): https://download.lineageos.org/extras
What works?
Wi-Fi
RIL (partially)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera
Video (playback & recording)
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues:
Bluetooth doesn't work
You'll get "CM audio error" on boot. Just ignore that.
Keyboard error when booting the system up, workaround is to install an another keyboard software like OpenBoard.
Incorrect RIL signal. Shouldn't be a problem .
WiFi doesn't get disabled on sleep mode, and it's draining the battery
Installation Instructions:
Download TWRP 3.0.3 here: https://www.androidfilehost.com/?fid=15664248565197185286
Root your phone!
Flash TWRP 3.0.3 to your phone using Rashr/Flashify
If you did flash the recovery, copy the ROM to your phone, then reboot to recovery
In the recovery, wipe: Data, Dalvik/ART cache, System, Cache
Install the ROM, and GApps! (optional)
When you did finish installing the ROM, reboot!
Woala! You installed LineageOS to your Lenovo A1000
​

What is the base ROM?

TriDiscord said:
What is the base ROM?
Click to expand...
Click to collapse
grandprimeve3g

hello!
my old phone is a dual sim a1000.
~2 years ago i wanted to flash a newer android cuz the stock was a slow piece of **** but i was not successful.
ive flashed twrp 3.2.1-0 on it somehow (i dont remember, was a long time ago) then ive tried to install a custom rom but didnt work, it got stuck on the lenovo screen. since i havent found any other custom rom ive just put it into my drawer and forget about it.
today i wanted to try it again so after a quick search ive found your rom and it worked. finally the phone can start and basically its not a brick anymore. but that bluetooth problem is severe.
since your post is from the summer, can i ask if you abandoned the project or not? did you manage to get the BT working eventually? is there any new build i can try that may work?
if not, do you know how should i restore the stock rom to this phone? is it worth it tho? or the broken custom lineage is still better than the bloated stock in 2022?
thank you

kwallet said:
hello!
my old phone is a dual sim a1000.
~2 years ago i wanted to flash a newer android cuz the stock was a slow piece of **** but i was not successful.
ive flashed twrp 3.2.1-0 on it somehow (i dont remember, was a long time ago) then ive tried to install a custom rom but didnt work, it got stuck on the lenovo screen. since i havent found any other custom rom ive just put it into my drawer and forget about it.
today i wanted to try it again so after a quick search ive found your rom and it worked. finally the phone can start and basically its not a brick anymore. but that bluetooth problem is severe.
since your post is from the summer, can i ask if you abandoned the project or not? did you manage to get the BT working eventually? is there any new build i can try that may work?
if not, do you know how should i restore the stock rom to this phone? is it worth it tho? or the broken custom lineage is still better than the bloated stock in 2022?
thank you
Click to expand...
Click to collapse
hi, let's answer to these questions!
kwallet said:
since your post is from the summer, can i ask if you abandoned the project or not? did you manage to get the BT working eventually? is there any new build i can try that may work?
if not, do you know how should i restore the stock rom to this phone? is it worth it tho? or the broken custom lineage is still better than the bloated stock in 2022?
Click to expand...
Click to collapse
1. yes, i did abandon the project, since i didnt have any testers.
2. No, I didn't get it working, I don't own this device. I ported it and guess it boots. D
3. Nope, sorry. I might try to port LOS14.1 if you can test the ROM of course.
4. I don't know. But it's definitely NOT worth it to install stock rom back since it's full of bloatware. It's better to use LineageOS

Headset is Reversed, How to fix this ?

AetherTF said:
Headset is Reversed, How to fix this ?
Click to expand...
Click to collapse
What do you mean "reversed"

notnoelchannel said:
What do you mean "reversed"
Click to expand...
Click to collapse
Im sorry my english is broken i mean Left audio coming from right headset and vice versa

AetherTF said:
Im sorry my english is broken i mean Left audio coming from right headset and vice versa
Click to expand...
Click to collapse
I think it's not a rom-related problem, can you try with an other headset?

notnoelchannel said:
I think it's not a rom-related problem, can you try with
Click to expand...
Click to collapse
I already try this headset with 2 different phone and its work correctly

notnoelchannel said:
hi, let's answer to these questions!
1. yes, i did abandon the project, since i didnt have any testers.
2. No, I didn't get it working, I don't own this device. I ported it and guess it boots. D
3. Nope, sorry. I might try to port LOS14.1 if you can test the ROM of course.
4. I don't know. But it's definitely NOT worth it to install stock rom back since it's full of bloatware. It's better to use LineageOS
Click to expand...
Click to collapse
hello. thank you for replying.
if you want i can test any build you throw at me just i dont wanna flash another bootloader cuz i dont wanna risk permabricking the phone. right now that twrp 3.2.1 is installed and working properly.

LineageOS 14.1 is ready for testing!!
Can someone test it please?
You can find the download link here.

notnoelchannel said:
LineageOS 14.1 is ready for testing!!
Can someone test it please?
You can find the download link here.
Click to expand...
Click to collapse
ill install it when i get home

kwallet said:
ill install it when i get home
Click to expand...
Click to collapse
Make sure to make a backup of your current os!!

notnoelchannel said:
Make sure to make a backup of your current os!!
Click to expand...
Click to collapse
no joy

kwallet said:
no joy
Click to expand...
Click to collapse
Oops sorry the partitions are wrong lemme fix that

Go into the zip, delete everything inside the META-INF folder, and replace them with this. Then repack the zip and try to install the rom again.

notnoelchannel said:
Go into the zip, delete everything inside the META-INF folder, and replace them with this. Then repack the zip and try to install the rom again.
Click to expand...
Click to collapse
installer finishes but after reboot nothing happens, its stuck on lenovo logo. ive waited 10 minutes but nothing. maybe ive f..ed up the zip?
didnt unzip, just opened with winrar, copypasted the inf and saved the zip.

kwallet said:
installer finishes but after reboot nothing happens, its stuck on lenovo logo. ive waited 10 minutes but nothing. maybe ive f..ed up the zip?
didnt unzip, just opened with winrar, copypasted the inf and saved the zip.
Click to expand...
Click to collapse
this means that lineage 14.1 doesn't boot, you can reflash the 13.0 version instead. i got a new stable pacrom build that has only have the bluetooth bug, i'll post it soon.

notnoelchannel said:
this means that lineage 14.1 doesn't boot, you can reflash the 13.0 version instead. i got a new stable pacrom build that has only have the bluetooth bug, i'll post it soon.
Click to expand...
Click to collapse
thank you, will waiting for that.
btw this A1000 is such a crap phone, i cant even enter the recovery properly. it should work fine with volume up + power (until lenovo logo then release power) but sometimes it just stuck at lenovo logo. its annyoing.
edit: actually its volume down + power lol.

Question how to upgrade to miui 14

hello all,
can i upgrade now to miui 14
any advice and how i can do it
i want to install the china version
thanks

use xiaomi.eu

hemainsider said:
hello all,
can i upgrade now to miui 14
any advice and how i can do it
i want to install the china version
thanks
Click to expand...
Click to collapse
Hi,
The easy way is download MIUI 14 from https://androidfilehost.com/?w=files&flid=337557 unzip the folder, start your F3 in FASTBOOT Mode,
Install using the "FASTBOOT" instruction are found on the Xiaomi.eu site,
https://xiaomi.eu/community/threads/23-2-13.68319/,
If you are rooted i suggest to backup you apps and data with Migrate-GPE.
I tried MIUI 14 Briefly before switching back to the Amazing Evo-X rom.

johnr64 said:
Hi,
The easy way is download MIUI 14 from https://androidfilehost.com/?w=files&flid=337557 unzip the folder, start your F3 in FASTBOOT Mode,
Install using the "FASTBOOT" instruction are found on the Xiaomi.eu site,
https://xiaomi.eu/community/threads/23-2-13.68319/,
If you are rooted i suggest to backup you apps and data with Migrate-GPE.
I tried MIUI 14 Briefly before switching back to the Amazing Evo-X rom.
Click to expand...
Click to collapse
thanks John for your reply
how did you find miui 14 ? so that you switch back to EVO-X rom

MIUI 14 - 23.2.13
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu

Hi,
I am a patron on the Evo-X Early release group and have just been updated to V7.6.1, i think Xiaomi.eu roms look good but it lacks all the latest extras that come with the newest "Custom Rom".
I use my Samsung smartwatch as a trusted device to keep my F3 unlocked, MIUI Roms will only except Xiaomi Devices, i am also a fan of SMART CHARGING, this is included in EVO-X.
Aggelos, always waits to perfect Evo-X before he release them into the public domain, i don`t use all the bells and whistles that this great rom has on offer but it is perfect for me, i like to try other roms to see how they compare but i always eventually return back to Evo-X,
If you fancy a try you could always look at Evo-X thread on page 1, post 20.
One thing i have learnt when i have been playing with other roms and things start to go a bit strange, like magisk not playing ball, Google Wallet detecting root and apps force closing, is to return to a almost stock rom using a Xiaomi.eu rom and install it via FASTBOOT mode as this normally fixes most issues.
Last weekend after installing some different roms (4 in total) , Magisk started playing up and apps were also force closing even though i formatted the data in recovery in between roms.
I decided to return to stock and re-install a MIUI V13.0.9.0 STOCK Rom and installed via FASTBOOT, after 10 minutes of waiting it wouldn`t complete, i tried to install it twice but i was still faced with the same issue.
I started to panic a bit but then i remembered my "Failsafe" option,
the "xiaomi.eu_multi_HMK40_POCOF3_22.1.19_v13-12-fastboot" rom.
I installed this via FASTBOOT and it completed as normal and it returned my F3 back to working order.

hemainsider said:
hello all,
can i upgrade now to miui 14
any advice and how i can do it
i want to install the china version
thanks
Click to expand...
Click to collapse
Xiaomi.eu, since we don't have Global MIUI 14 yet, and you wouldn't use a GMS-less Chinese MIUI version.
I'd go about it like this.
I download the ROM from Xiaomi.eu
I use OrangeFox Recovery: https://orangefox.download/device/alioth
I flash the ROM in Recovery.
Format data
Xiaomi.eu ROM ZIPs are now both Fastboot AND Recovery ROMs. I personally always prefer Recovery, since it's more convenient. No PC needed.

johnr64 said:
Hi,
I am a patron on the Evo-X Early release group and have just been updated to V7.6.1, i think Xiaomi.eu roms look good but it lacks all the latest extras that come with the newest "Custom Rom".
I use my Samsung smartwatch as a trusted device to keep my F3 unlocked, MIUI Roms will only except Xiaomi Devices, i am also a fan of SMART CHARGING, this is included in EVO-X.
Aggelos, always waits to perfect Evo-X before he release them into the public domain, i don`t use all the bells and whistles that this great rom has on offer but it is perfect for me, i like to try other roms to see how they compare but i always eventually return back to Evo-X,
If you fancy a try you could always look at Evo-X thread on page 1, post 20.
...
Click to expand...
Click to collapse
Evo-X is definitely reliable/trustable.
I think your issues may not be ROM-related, but Magisk-related. The ROM you used before, doesn't matter. What matters is your firmware. Better to not use v14 Dev Firmware, causes the fingerprint-scanner to not work. Better to simply the devs' recommended v13 firmware or your regions' latest firmware, or Global.
Apps in Magisk DenyList can force-close, if you use a Magisk Module that 'cannot be hidden'. And Google has done changes, so that Vanilla Magisk causes issues for some people now, like me. Some apps started being unavailable in Play Store (e.g. Instagram). Fix for me was to use Magisk Alpha + Zygisk + Disabled Enforce DenyList + Shamiko Magisk Module.