Hi, i'm a noob..i wanted to flash LineageOS/Android 11 on my samsung galaxy note 4 n910f so i rooted but was finding difficulties with twrp booting after a successful flash so i tried flashing back stock firmware of the note 4 via odin but failed every time,because of that i couldn't boot into recovery anymore but could boot into odin mode.I tried repairing the recovery so i flashed the boot img of the lineageOS via twrp mobile app which flashed successfully by surprise..now phone bricked with secure fail:Kernel,Start Up Failed,i've used the verizon repair assistant and various repair tools i could find but to no avail. Everything is gone but i can boot into download mode...I've tried Full Firmware N910FXXU1DRI2_N910FOXX1DSB1_6.0.1 with it's pit file to repair via odin too but fail all the time.Please i need help anyone here?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4409 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hey guys,
i have a serious phone damage/brick over here.
I can start the device only in download mode, which is probably not that bad.
Anything i flash through Odin is not working:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOE4_I9195OXACOE1_I9195XXUCOE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I tried flashing the stock firmware, only the stock recovery, firmware with pit file, because of missing pit file on phone and of course Odin 1.85, 3.09 and 3.10.7
3.09 and 3.10.7 are not working at all:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
So, is there any possibility left, or the phone really dead?
Background information: phone was working the other day and then turned black. Bootlooping for a while, and then even the visual effects (samsung logo) didn't even show up. At this point, only download mode is working.
Hope someone knows a solution, or even a possibility to check if emmc is still working?
Hello, I have been trying to fix my samsung galaxy s6 edge for it was damaged by someone in an attempt to unlock the phone.
(Custom binary blocked by FRP Lock) then the phone is not booting anymore, not even charging as well. Just giving boot loop then the error message on the upper left corner.
Samsung said they don't have the S/W for my device since it has been purchased in another country. I'm from the PH and the phone came from US(T-mobile)
Model #- Sm-G925T
Now I'm trying to Flash Stock ROM and it's giving me this error. I've tried multiple .tar.md5 file and I don't think the firmwares are the problem.
I'm guessing that ROM that he flashed is G925TUVU3EPD1(as shown in Recovery mode)
I have been trying to do this for the whole day. I am desperate for help. I never had a smartphone for 2 years after my Samsung GS3 got lost until when Someone sent me this as a gift.
Here is the Odin Log.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925TUVU1AOCG_CL4351282_QB4489203_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925TUVU1AOCG_CL4351282_QB4489203_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G925TTMB1AOCG_CL4351282_QB4489203_REV02_us er_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925TUVU1AOCG_CL4351282_QB4489203_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I appreciate ANYONE who will help. Thank you in advance.
My S3 Neo is a Uzbekistan CAC version & i am currently residing in India is a on earlier 4.4.4 now suddenly it wasn't working so i have to install stock 4.3. GT-I9300IXXUAND1
Now when i downloaded the new os
I9300IXWSBQB1_I9300IOXEBOK1_CAC
I9300IXWUBOF1_I9300IOXEBOF1_CAC
both of these are not flashing it showing
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IXWUBOF1_I9300IOXEBOF1_I9300IXXUBOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Try rooting with kingroot Now when its rooted tried custom recovery by TWRP it stucked in the downloading mode.
Now again trying to flash using
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300IXXUAND1_2566126_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300IXXUAND1_2566126_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9300IXXUAND1_REV00_CL_1528638.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OJV_I9300IOJVAND1_2566126_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any other way to flash custom ROM or Any other stock rom.
what ever just to run games & internet usage.
earlier my phone get dead so i tried with the help from here so debricked the phone & get it working condition.
Its IMEI is lost both sims not working & back camera is gone as well.
Thanks In Advance.
I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Changing frimware from UAE to India - Resolved
Issue resolved. I first uploaded only the India specific CSC using Odin, then factory reset the phone, then I uploaded only the AP file, again factory reset the phone as soon as it booted, then uploaded the BL & CS file and again factory reset the phone. Now the CSC has been changed to INS.
Bala_R said:
I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
roshan_dubey- said:
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
Click to expand...
Click to collapse
Download Samsung latest usb driver on your pc
aarush.chaurasiya said:
Download Samsung latest usb driver on your pc
Click to expand...
Click to collapse
I tried but whenever I connect it via USB my computer says it connot recognize the last plugged in device and after that my phone is just charging I tried installing latest drivers from Samsung but I didn't work what should I do?
So I data reset my phone and then tried to use Odin to flash my phone to the USA version of the firmware (trying to go to verizon today). One thing I've noticed is that Secure Download is Enabled and FRP Lock is Off.. I've got USB debugging on and the software is installed on the PC (I can copy files off of the device and on to the pc). Here's what I get. Any help is appriciated.
Flashing G965USQS4CSC8_G965UOYN4CSC8_USC
Running as Admin using the CSC file.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5341 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ran as admin with the Home CSC file.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> dqmdbg.img.ext4
<ID:0/005> carrier.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 5367 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sigh, looks like a different USB port did it.
Hi, i have same problem with my S9 plus. Odin cannot flash.
I get this error message: only official released binaries are allowed to be flashed(RECOVERY)
What can i do ?