Develop Bugs

E-signature verification failed and struggling for a flashing of stockROM

I am facing typical problem and struggling for a solution. My Samsung grand 4.2.2 (build no. JDQ39.I9082XXUBNG3) is definitely going to recovery mode by various method ( by pressing keys or, adb recovery reboot ) but showing only options which is its stock rom option is giving as earlier . When phone is in normal mode ( i.e kept ON ), Odin is sensing it but flashing with any philz_touch_5.15.0-i9082.tar ,CWM-touch_i9082_chotu.tar.md5 OR, any other recovery_20120412.tar is not passed through completely and when run it in Odin shows as below and when flashed directly from device through stock ROM option with above tar file /md5 file in recovery mode it shows E-signature verification failed & does not happen any thing further. I am able to boot my device in stock recovery mode of samsung ( e 3) which is having very limited option and my device is also in working condition.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.15.0-i9082.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 1) or failed 0.
all other command adb reboot recovery, adb system etc, are working but fastboot system is not giving any return values instead it is returning to same command prompt .
ODIN IS ALSO NOT WORKING AND SENSING DEVICES WHEN DEVICE IS KEPT IN RECOVERY MODE
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Hello,
Did you ever find a solution for your problem?

Mohdhamm said:
Hello,
Did you ever find a solution for your problem?
Click to expand...
Click to collapse
Hi dear
I find the solution. First I was doing flashing ROM for first time for mobile and due to some confusion I was not able to differentiate between Recovery mode and Download mode in Grand -i9082 and hence I was going to recovery mode always by pressing Volume Up +Home +Power instead of going to Download mode Volume Down +Home +Power. This mistake was saved in my mind and hence I was not able to do flashing through Odin or , other way. Now this is not needed and hence problem solved.
Sent from my GT-I9082 using Tapatalk

Bricked Samsung S4 Mini (UK VODAFONE) GT-I9195I

Hi all im on my last hopes here so please help if you can, I recently tried to root my phone, unscusessfully. Phone soft bricked, so fired up odin (as a novice) and checked all boxes including NAND Erase and format partition !!
Now my phone does nothing other than boot into download mode, recovery mode appears to be non existent all i have is download mode. The phone does occasionally boot into OS but comes up with a message saying internal memory damaged, reboot doing so will erase all data... I click restore button and all it does is reboots me into download mode !!!
I've tried kies, which failes to convert into mode
ODIN which fails to do anything this is the message from the most recent attempt using advise given in this thread ... http://forum.xda-developers.com/showthread.php?t=2751224
this is the message odin gave me...
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
really stuck with what to do with this phone, i want it working as i need to donate it to a relatve that has no phone
any help appreciated.

nice! if you have exactly! gt-i9195i why you flash rom for gt-i9195? This is different models!
i9195i has SoC Qualcomm Snapdragon 410
i9195 has SoC Qualcomm Snapdragon 400
If you realy have gt-i9195i download ROM from here : http://www.sammobile.com/firmwares/database/GT-I9195I/
and flash it via Odin

Changing frimware from UAE to India

I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)

Changing frimware from UAE to India - Resolved
Issue resolved. I first uploaded only the India specific CSC using Odin, then factory reset the phone, then I uploaded only the AP file, again factory reset the phone as soon as it booted, then uploaded the BL & CS file and again factory reset the phone. Now the CSC has been changed to INS.
Bala_R said:
I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me

roshan_dubey- said:
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
Click to expand...
Click to collapse
Download Samsung latest usb driver on your pc

aarush.chaurasiya said:
Download Samsung latest usb driver on your pc
Click to expand...
Click to collapse
I tried but whenever I connect it via USB my computer says it connot recognize the last plugged in device and after that my phone is just charging I tried installing latest drivers from Samsung but I didn't work what should I do?

Errors with odin in Tab 3 7.0 t210r

I've been trying for a long time to unlock the bootloader of my SM-T210R, to install twrp and change the rom, but odin doesn't work at all.
I have already downloaded my rom stock, but it doesn't even install properly, here is the error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> T210RUES0CQA1_T210RXAR0CQA1_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> T210RUES0CQA1_T210RXAR0CQA1_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COI1_T210RXAR0COI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried dozens of solutions and etc., with different versions of odin and even different recoverys, but none will. There's this guy rootjunky(.com) who has made several videos with this model, so it works, but he never mentions bootloader and does not favor.
I am not a novice in this area, I had a moto g3 osprey and exchanged direct rom and kernel on it, however motorola facilitates the unlocking of the bootloader.
An important information is that it has root king root, I don't even remember how I did it, but the system status is as custom, and the rom is from the factory.
I once used odin on it and installed the rom stock to remove a flawed root, and did not delete anything, just removed the root.
Dude I'm going crazy I don't know what to do lol
I await a salvation

I made a profile just so I could respond to this. I've been searching the internet over for 6 years - so many so close, but sm-t210r will be made a fool of by no man!! I've seriously spent 100s of hours, even acquired EXTRA tablets just so I could break them in different ways. You can't put the baby back in the mother. Even with the heroics of gr8nol - t210r's true firmware remains exit only :-(

Secure Fail:Kernel

Hi, i'm a noob..i wanted to flash LineageOS/Android 11 on my samsung galaxy note 4 n910f so i rooted but was finding difficulties with twrp booting after a successful flash so i tried flashing back stock firmware of the note 4 via odin but failed every time,because of that i couldn't boot into recovery anymore but could boot into odin mode.I tried repairing the recovery so i flashed the boot img of the lineageOS via twrp mobile app which flashed successfully by surprise..now phone bricked with secure fail:Kernel,Start Up Failed,i've used the verizon repair assistant and various repair tools i could find but to no avail. Everything is gone but i can boot into download mode...I've tried Full Firmware N910FXXU1DRI2_N910FOXX1DSB1_6.0.1 with it's pit file to repair via odin too but fail all the time.Please i need help anyone here?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4409 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)