{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IntroductionThis is the unofficial LineageOS 18.1 thread for the Sony Xperia Z3 DUAL D6633. Although Lineage is maintaining a device tree for the D6633 it is currently not supported officially, but this may change in the future.
If you own a Z3 single SIM D6603 go here.
If you own a Z3 Compact D5803 go here.
If you own a Z3 DUAL SIM Hongkong variant D6683 see post#2.
LineageOS 18.1 is an open-source Android distribution based on the Android Open Source Project (AOSP) version 11 (R).
InstallationIf you are on stock OS, you need a custom recovery first. You can get the recommended recovery with the download link below.
If you are coming from stock or other ROMs, you need to make a factory reset. You also will need a factory reset if you come from LineageOS 17.1 with encryption enabled.
As always, make sure to backup before installing this ROM.
Detailed installation instructionsPlease follow the installation instructions for LineageOS on z3. However, do not use the provided recovery and ROM links for the z3 but use the download links for the z3dual below.
Downloads
ROM (Update 25Sep2021):
https://hidrive.ionos.com/lnk/a3gqEpTM
MD5: d58325df7c763198a6f28394aefc8e2c for lineage-18.1-20210925-UNOFFICIAL-z3dual.zip
Recovery (LineageOS recovery for Z3dual):
https://hidrive.ionos.com/lnk/QpAKEmxp
Google Apps (optional): Recommended Google Apps can be found here.
Source CodeThe source code of LineageOS is available here. If you would like to contribute to LineageOS, please visit out Gerrit Code Review.
The z3dual device tree is available here.
The kernel is based on V3.4 and source code for this device is available here. The used configuration is lineageos_shinano_leo_defconfig available at arch/arm/configs/lineageos_shinano_leo_defconfig in the kernel source.
Spoiler: Changelog
14Jul2021 - Initial build with sources available at that date
25Sep2021 - Build with sources available at that date
See also: https://www.lineageoslog.com/18.1/z3
Plus pending active changes for z3 and shinano-common
See: https://review.lineageos.org/
ContributorsNeoArian, Mr.Tom_Tom
If you want to donate to support development:
Donate via PayPal to NeoArian
Donate via PayPal to LineageOS
What about the D6683?Compared to the D6633, the D6683 has a slightly different hardware and never got a .291 firmware update with an updated bootloader.
According to a letter from SONY submitted to the FCC in 2015, D6683 has different power amplifiers for UMTS and LTE. this explains why users which try to just use a D6633 ROM on a D6683 have trouble with LTE, see here for example.
With the support of @pi r I am trying to provide a solution for D6683 devices to run LOS18.1 and I will post that here if we are successful.
Mr.Tom_Tom said:
IntroductionLineageOS 18.1 is an open-source Android distribution based on the Android Open Source Project (AOSP) version 11 (R). This is the official LineageOS 18.1 thread for the Sony Xperia Z3 (D6603).
InstallationIf you are on stock OS, you need a custom recovery first. You can get the recommended recovery with the download link below.
If you are coming from stock or other ROMs, you need to make a factory reset. You also will need a factory reset if you come from LineageOS 17.1 with encryption enabled.
As always, make sure to backup before installing this ROM.
Detailed installation instructionsPlease follow the installation instructions for LineageOS on z3. However, do not use the provided recovery and ROM links for the z3 but use the download links for the z3dual below.
Downloads
ROM:
https://hidrive.ionos.com/lnk/ODgqEhd8
MD5: c94597a72188540e207857657cd05ae2 for lineage-18.1-20210715-UNOFFICIAL-z3dual.zip
Recovery (LineageOS recovery for Z3dual):
https://hidrive.ionos.com/lnk/QpAKEmxp
Google Apps (optional): Recommended Google Apps can be found here.
Source CodeThe source code of LineageOS is available here. If you would like to contribute to LineageOS, please visit out Gerrit Code Review.
The z3dual device tree is available here.
The kernel is based on V3.4 and source code for this device is available here. The used configuration is lineageos_shinano_leo_defconfig available at arch/arm/configs/lineageos_shinano_leo_defconfig in the kernel source.
Spoiler: Changelog
Initial build with sources available as of 14 July 2021
ContributorsNeoArian, Mr.Tom_Tom
If you want to donate to support development:
Donate via PayPal to NeoArian
Donate via PayPal to LineageOS
Click to expand...
Click to collapse
seems like the GPS doesn't work, i can't get my location in google maps, however, the location icon appears on status bar.
TheShadowOfAGhost20 said:
seems like the GPS doesn't work, i can't get my location in google maps, however, the location icon appears on status bar.
Click to expand...
Click to collapse
reflashed the rom 2 times. now it works
woo
I just broght it and try flash it later
thank you!
Hi i found that sometimes on this rom that enter storage is notthere and i have screen shot about it and i have some logs i think will help
I found that if you unmount microsdcard
And remount it internal storage had disappear
Mahmaod Rad said:
I found that if you unmount microsdcard
And remount it internal storage had disappear
Click to expand...
Click to collapse
try flashing the rom again, usually this would fix the problems
@Mr.Tom_Tom do i need chromecast dongle to use cast feature?
i connected my phone and tv to same wifi network but nothing gets found.
tried an application then my tv got detected but right after connecting to tv, my phone rebooted.
Thanks for porting Lineage 18.1 to D6633. I'm trying to install this to a D6683 which has had the following already done:
1. Flashed D6633 23.5.A.1.291 stock OS using FlashTool (in the downloaded XperiFirm files, I deleted fwinfo.xml and manually selected D6683 in the FlashTool > Bundles > Create )
2. Got root access with SuperSU with locked bootloader then backed up TA partition to preserve DRM keys.
3. reboot into temporary TWRP (still with locked bootloader) and attempt adb sideload lineage 18.1 D6633
When attempting to adb sideload Lineage 18.1 for the D6633 onto the D6683 device, TWRP returns an error: "E3004: This package is for device: z3dual; this device is ." (see attached screenshot).
The other screenshot of the About Phone screen is for general reference. Despite the phone actually being a D6683, the Model Number shows D6633. Also, to get a temporary TWRP running, the kernel was downgraded from 23.5.A.1.291 to 23.5.A.0.575 despite showing 23.5.A.1.291 in the Build Number. Under Kernel Version, it shows Apr 22 instead of June which supposedly means it is actually running 23.5.A.0.575
A couple of questions: Is it possible for me to get this Lineage 18.1 for D6633 image to work on this D6683 device somehow?
My main question:
Do I have to unlock the bootloader first and install TWRP permanently to the recovery partition? This question is why I'm writing this post here as I will only unlock the bootloader if I have to, assuming Lineage18.1 for D6633 can work on a D6683
zpunout said:
Thanks for porting Lineage 18.1 to D6633. I'm trying to install this to a D6683 which has had the following already done:
1. Flashed D6633 23.5.A.1.291 stock OS using FlashTool (in the downloaded XperiFirm files, I deleted fwinfo.xml and manually selected D6683 in the FlashTool > Bundles > Create )
2. Got root access with SuperSU with locked bootloader then backed up TA partition to preserve DRM keys.
3. reboot into temporary TWRP (still with locked bootloader) and attempt adb sideload lineage 18.1 D6633
When attempting to adb sideload Lineage 18.1 for the D6633 onto the D6683 device, TWRP returns an error: "E3004: This package is for device: z3dual; this device is ." (see attached screenshot).
The other screenshot of the About Phone screen is for general reference. Despite the phone actually being a D6683, the Model Number shows D6633. Also, to get a temporary TWRP running, the kernel was downgraded from 23.5.A.1.291 to 23.5.A.0.575 despite showing 23.5.A.1.291 in the Build Number. Under Kernel Version, it shows Apr 22 instead of June which supposedly means it is actually running 23.5.A.0.575
A couple of questions: Is it possible for me to get this Lineage 18.1 for D6633 image to work on this D6683 device somehow?
My main question:
Do I have to unlock the bootloader first and install TWRP permanently to the recovery partition? This question is why I'm writing this post here as I will only unlock the bootloader if I have to, assuming Lineage18.1 for D6633 can work on a D6683
Click to expand...
Click to collapse
as far as i know, you must be on the latest official firmware available for your device, then use lineage recovery, not the twrp.
then you can install this rom. i could install D6603 roms on my dual device so i guess you can install this rom on your device too.
Thanks TheShadowOfAGhost20 for your help. Got Lineage 18.1 z3dual running with the recovery image you provided.
Worth noting here in case others have an issue: The only hiccup I had with trying to flash and boot into the new Lineage recovery was this error: "fastboot: error: Couldn't parse partition size '0x'"
I tried "fastboot flash:raw boot recovery.img" and was then able to reboot into Lineage custom recovery.
Have now successfully installed Lineage 18.1 D6633 onto a D6683 and will test if the device works normally with LTE bands etc...
Hi zpunout to flash the rom just flash the recovery on 1st post but not in recovery so type fastboot flash boot
Or in recovery put the recovery.img in internal storage or sdcard and got to install image and go to where you put the file and flash it on boot and then reboot you will see los recovery and go to flash adb and side load and side load it from pc with gapps and magisk root
Don't ues 23 build but ues this one https://github.com/topjohnwu/Magisk/files/6330986/Magisk-v22.1_mod_sony.zip and there you go
I installed this rom on my Z3. Both simcards are recognized. But WIFI is not connecting.
Ermann123 said:
I installed this rom on my Z3. Both simcards are recognized. But WIFI is not connecting.
Click to expand...
Click to collapse
I just found out the reason for Wifi not working after switching my guest network back to wpa2 security. Obviously, the ROM or the Z3 Device does not support wpa3 encryption for wifi connections.
Is there at all a possibility to fix this?
deleted
Ermann123 said:
I just found out the reason for Wifi not working after switching my guest network back to wpa2 security. Obviously, the ROM or the Z3 Device does not support wpa3 encryption for wifi connections.
Is there at all a possibility to fix this?
Click to expand...
Click to collapse
WPA3 is not supported at the moment, and likely it won't be supportet at all due to lack of radio firmware capabilities. Would be happy to be proven wrong here...
Mahmaod Rad said:
Hi zpunout to flash the rom just flash the recovery on 1st post but not in recovery so type fastboot flash boot
Or in recovery put the recovery.img in internal storage or sdcard and got to install image and go to where you put the file and flash it on boot and then reboot you will see los recovery and go to flash adb and side load and side load it from pc with gapps and magisk root
Don't ues 23 build but ues this one https://github.com/topjohnwu/Magisk/files/6330986/Magisk-v22.1_mod_sony.zip and there you go
Click to expand...
Click to collapse
Sir I tried this file but error occurs while installing. i can't root the phone. can you help me?
hidden.hero said:
Sir I tried this file but error occurs while installing. i can't root the phone. can you help me?
Click to expand...
Click to collapse
extract the apk inside the zip file, rename it to .zip then flash it through recovery, it gives an error, ignore it and click yes then it shows success, you can also install version 23 after the flash, choose direct install option in it, it will update magisk's version
TheShadowOfAGhost20 said:
extract the apk inside the zip file, rename it to .zip then flash it through recovery, it gives an error, ignore it and click yes then it shows success, you can also install version 23 after the flash, choose direct install option in it, it will update magisk's version
Click to expand...
Click to collapse
thank you sir. It worked
Related
LineageOS 18.1 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for fixing anything (preferably dmesg and logcat).
FEATURES
EAS kernel (thanks to @linckandrea )
Forced Encryption with FDE (Full Disk Encryption)
DOWNLOAD
Please check changelogs and download links at #2
maple (G8141):
twrp-3.5.0-0-20210117-maple
maple_dsds (G8142):
twrp-3.5.0-0-20210117-maple_dsds
INSTALLATION
Clean flash recommended when updating from Android 10 or stock:
1. Flash latest stock firmware (47.2.A.10.107) with newflasher.
2. Flash and boot the new twrp given in this thread.
3. Format data and wipe everything.
4. Flash the ROM, GApps (if needed) and root (if needed).
5. If you have IMS (VoLTE) working on stock, enable IMS in Settings - XperiaParts.
Note: If you are updating from Android 10 and can't boot the new TWRP, please backup your stuffs and format data by using either the old TWRP or fastboot -w. This is required because there are some adjusts in userdata image size to fix FDE encryption.
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
Google Apps
Both OpenGApps and NikGApps should work. You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. Open GApps for Android 11 is still in beta. You can download those releases here.
KNOWN ISSUES
WFD is not working
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Contributors
derf elot, modpunk, Rooted_Ansh, linckandrea
Telegram Group
[Tinder][EN/DE/♋] Xperia XZ Premium - Sticker Fightz Biatch
Development group for XZP - Lead by: Everyone Do not spam and cooperate with developers. Google first before asking any help
t.me
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Stable Release Date: 2022-03-23
Thread Information
Created 2021-01-21
Last Updated 2022-03-23
2022-03-23
Last build of Lineage 18.1 (and probably nobody needs this anymore)
Lineage 19.1 is already available, check this thread.
G8141: https://androidfilehost.com/?fid=14655340768118440781
G8142: https://androidfilehost.com/?fid=14655340768118440782
2021-10-7
irregular update
G8141: https://www.androidfilehost.com/?fid=7161016148664819265
G8142: https://www.androidfilehost.com/?fid=7161016148664819266
2021-6-29
irregular update
G8141: lineage-18.1-20210628-UNOFFICIAL-maple.zip
G8142: lineage-18.1-20210628-UNOFFICIAL-maple_dsds.zip
2021-3-31
March Security Update
Vulkan fix (thanks to @linckandrea )
New IMS implement (Please enable IMS option in Xperia Parts if you have IMS working on stock.)
EAS kernel (thanks to @linckandrea )
Forced Encryption since this release.
Download links:
G8141: lineage-18.1-20210331-UNOFFICIAL-maple.zip
G8142: lineage-18.1-20210331-UNOFFICIAL-maple_dsds.zip
2021-01-20
Initial release. Download links:
G8141:lineage-18.1-20210120-UNOFFICIAL-maple
G8142: lineage-18.1-20210119-UNOFFICIAL-maple_dsds
Reserved.
No1Alien said:
LineageOS 18.1 for Sony Xperia XZ Premium
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for fixing anything (preferably dmesg and logcat).
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
FDE Encryption support
DOWNLOAD
You can download the latest releases here:
maple (G8141):
twrp-3.5.0-0-20210117-maple
lineage-18.1-20210120-UNOFFICIAL-maple
maple_dsds (G8142):
twrp-3.5.0-0-20210117-maple_dsds
lineage-18.1-20210119-UNOFFICIAL-maple_dsds
INSTALLATION
Clean flash recommended when updating from Android 10 or stock:
1. Flash latest stock firmware (47.2.A.10.107) with newflasher.
2. Flash and boot the new twrp given in this post.
3. Flash the ROM, GApps (if needed) and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
Google Apps
Both OpenGApps and NikGApps should work. You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. Open GApps for Android 11 is still in beta. You can download those releases here.
KNOWN ISSUES
WFD is not working yet (waiting for new non-BSP blobs)
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Contributors
derf elot, modpunk, Rooted_Ansh
Telegram Group
[Tinder][EN/DE/♋] Xperia XZ Premium - Sticker Fightz Biatch
Development group for XZP - Lead by: Everyone Do not spam and cooperate with developers. Google first before asking any help
t.me
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Stable Release Date: 2021-01-21
Thread Information
Created 2021-01-21
Last Updated 2021-01-21
Click to expand...
Click to collapse
Awesome work mate!
just tried flashing twrp to my phone (single sim) running aosp 11, and it couldnt get past the splash screen.
also tried fastboot booting the image,and it just hangs on the sony logo.
it could be the kernel im using, ill try a complete wipe and reinstall of this rom and twrp tonight.
EDIT: flashing stock rom to start fixed it. everything works as it should now.
Gcam desteği?
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
ted5300 said:
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
Click to expand...
Click to collapse
On my g8141 all things work. I have flash twrp 3.5 with old 3.4 . Format data,reboot twrp,format data,reboot back to twrp. After this 2 format,i flash the rom+gapps mini.(no reflash stock)All runs good. But i miss the PixelExp
ted5300 said:
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
Click to expand...
Click to collapse
i was having the same issue, i fixed it by flashing back to stock firmware before flashing twrp and this rom.
now running twrp 3.5.0 and lineageos 18.1 rooted with magisk 21.4 with no issues.
born2bkilled said:
just tried flashing twrp to my phone (single sim) running aosp 11, and it couldnt get past the splash screen.
also tried fastboot booting the image,and it just hangs on the sony logo.
it could be the kernel im using, ill try a complete wipe and reinstall of this rom and twrp tonight.
EDIT: flashing stock rom to start fixed it. everything works as it should now.
Click to expand...
Click to collapse
ted5300 said:
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
Click to expand...
Click to collapse
No1Alien said:
Note: If you are updating from Android 10 and can't boot the new TWRP, please backup your stuffs and format data by using either the old TWRP or fastboot -w. This is required because there are some adjusts in userdata image size to fix FDE encryption.
Click to expand...
Click to collapse
Thank you for your feedback, but the situation is the same with TWRP. I've used fastboot -w. nothing changed. Then I format data from the new TWRP 3.5 and after reboot I can't go to TWRP again. Some other ideas what I can try? Regards
ted5300 said:
Thank you for your feedback, but the situation is the same with TWRP. I've used fastboot -w. nothing changed. Then I format data from the new TWRP 3.5 and after reboot I can't go to TWRP again. Some other ideas what I can try? Regards
Click to expand...
Click to collapse
Start from stock ROM. Use xperifirm to download the latest stock Rom and use newflasher to flash it. Then flash twrp, lineage and magisk.
Thats how I did it.
Thanks for your hard work on this. Flashed this, working great, love having 2 day battery life. With NO gapps. It’s all about privacy
Hopefully you are still working on is
First of all: Many thanks for spending all the effort to create this ROM for the old Sony XZ Premium!!!
So far I was using Bliss ROM but the new Android security issues made me to wake up and look for something fresher ;-)
I do have a G8141 (German) device. Flashing worked quite well and the system was booting up quickly. (ROM+TWRP 3.5+openGApps nano+Magist 21.4)
So far I detected just one issue yet which I would like to report:
WLAN and mobile connection not stable. I required me 4 reboot attempts to get a more stable connection. WLAN was constantly dropping out and only a reboot at the end made the device to reconnect. Same for cellular connection. After around 4 reboots I have a stable connection now.
I will monitor the behaviour and hopefully it will become stable after all Google Apps are installed etc..
I will let you know.
NFec__ said:
First of all: Many thanks for spending all the effort to create this ROM for the old Sony XZ Premium!!!
So far I was using Bliss ROM but the new Android security issues made me to wake up and look for something fresher ;-)
I do have a G8141 (German) device. Flashing worked quite well and the system was booting up quickly. (ROM+TWRP 3.5+openGApps nano+Magist 21.4)
So far I detected just one issue yet which I would like to report:
WLAN and mobile connection not stable. I required me 4 reboot attempts to get a more stable connection. WLAN was constantly dropping out and only a reboot at the end made the device to reconnect. Same for cellular connection. After around 4 reboots I have a stable connection now.
I will monitor the behaviour and hopefully it will become stable after all Google Apps are installed etc..
I will let you know.
Click to expand...
Click to collapse
Finally I am giving up. I am not able to get a stable WLAN or cellular connection. After installing it again and again (format data twice, factory reset etc., starting all over with latest stock FW) am not getting it working properly. After 1-2 hours, WLAN is not able to connect anymore and cellular is detected incl. carrier but dropping off and data connection not possible to establish.
Really strange was the latest/ last Sony FW everything works. With other ROMS I am running into similar problems. Sometimes cellular is not detected, but WLAN works and sometimes both are not working. Last fully working alternative ROM was Bliss from late September 2020. After reading that several of you are successfully using this ROM I start to believe that this is perhaps a problem with my device made for the German market...
Is there an option to hide the "hide keyboard" button at the bottom while typing? I've already used full gesture but it still shows a bar with hide keyboard button at the bottom while typing.
Thanks OP for bringing LOS18 to maple!!
The best Android 11 ROM. Using it for over a week and everything works. Battery life is two days with regular use.
Weird, after installation and enter the SIM pin and connect to the Wi-Fi network, it take me charge directly from the carrier network for data. Sould be better what connection I will choose during the first installation as primary (Wi-Fi or mobile ) and not connecting by default directly to the mobile internet. With others Android 11 ROMs this issue not exits. Some thoughts?
fastboot -w
install twrp-3.5.0-0-20210117-maple
install lineage-18.1-20210120-UNOFFICIAL-maple from twrp
I want to install gapps but after first run i cannot back to twrp - when I try to run in recovery mode I only see black screen.
I try to install oldest twrp - no results.
Any idea what is the problem ?
Margiel said:
fastboot -w
install twrp-3.5.0-0-20210117-maple
install lineage-18.1-20210120-UNOFFICIAL-maple from twrp
I want to install gapps but after first run i cannot back to twrp - when I try to run in recovery mode I only see black screen.
I try to install oldest twrp - no results.
Any idea what is the problem ?
Click to expand...
Click to collapse
That’s what just happened to me. But I didn’t install gapps. Just went black screen, won’t boot up. Also I’ve had it running for about 3-4 weeks with no issues. Now this. Can’t even get into twrp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
GPS
RIL (VoLTE calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Known issues:
You tell me the rest
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
Follow Instructions Carefully otherwise you will get error :
fastboot boot recovery-twrp64-nora.img (ONLY BOOT IT!! TOO BIG TO FLASH!)
Wipe -> ADVANCED -> Format Data - type yes
Wipe -> ADVANCED -- select system + vendor -> SWIPE TO WIPE
reboot bootloader
fastboot flash recovery nora-rec.img
fastboot boot nora-rec.img
Factory reset
Flash ROM, Gapps 10 arm64 pico together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
64bit Downloads:
ROM:
Moto E5 (Nora) XT-1944
TWRP RECOVERY: twrp-nora-bootonly.img
LOS RECOVERY: nora-rec.img
GAPPS: Gapps 10 arm64
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/motoe5/android_kernel_motorola_msm8937/tree/twerk-X
CREDITS:
LineageOS
Team Hyper
CAF
Special thanks to @amaterasushen for helping make this possible :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/brickjungle
XDA:DevDB Information
LineageOS-Nora, 64BIT ROM for the Moto E5
Contributors
whodat711, karthick mostwanted, JarlPenguin, amaterasushen, wiktor140
Source Code: http://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
hi, amazing job for porting this rom
tho i'm a bit confused with the steps to flash the zip files, am i supposed to use "nora-rec.img" recovery to flash the rom and the gapps? i can't find the option to flash zip files in that recovery
Isra_Perez said:
hi, amazing job for porting this rom
tho i'm a bit confused with the steps to flash the zip files, am i supposed to use "nora-rec.img" recovery to flash the rom and the gapps? i can't find the option to flash zip files in that recovery
Click to expand...
Click to collapse
Not a port, rom was actually built properly based off hannah trees (Credits to @karthick mostwanted) , however TWRP was a port from hannah , made by @amaterasushen
The problem is Nora and james both have tiny recovery partition sizes so its gonna require some more work before twrp will be flashable , For now just use it to wipe system and vendor only , and use lineage recovery for the rest, you can goto the 'update' menu in lineage recovery to flash zips for now.
whodat711 said:
Not a port, rom was actually built properly based off hannah trees (Credits to @karthick mostwanted) , however TWRP was a port from hannah , made by @amaterasushen
The problem is Nora and james both have tiny recovery partition sizes so its gonna require some more work before twrp will be flashable , For now just use it to wipe system and vendor only , and use lineage recovery for the rest, you can goto the 'update' menu in lineage recovery to flash zips for now.
Click to expand...
Click to collapse
I already flashed it, after I did a factory reset with the lineage recovery, I rebooted into twrp and flashed both files + magisk, everything is working really well, I'm actually surprised of how fluid this rom is
Nice! , yeah as I said , no port rig job.. its the real deal
Glad you enjoying it
I manage to successfully install this ROM even though I deviated slightly from the instructions. I did the following:
fastboot boot recovery-twrp64-nora.img
Wipe -> ADVANCED -> Format Data - type yes
Wipe -> ADVANCED -- select system + vendor
reboot bootloader
fastboot flash recovery nora-rec.img
fastboot boot nora-rec.img
Factory reset
reboot to bootloader
fastboot boot recovery-twrp64-nora.img
Copied the Lineage and OpenGapps zips to the internal memory and flashed via TWRP without errors
excellent
I have seen in other ROMs that there are graphical bugs and the audio equalizer does not work correctly. Are these bugs present in this ROM?
Nora never had a rom until now
I do not have a nora , however i do not believe it has such bugs
whodat711 said:
Nora never had a rom until now
I do not have a nora , however i do not believe it has such bugs
Click to expand...
Click to collapse
Hello. Thanks for the ROM, I already downloaded it. I'm a bit of a layman about installing ROMs. I was confused to read your instructions. Can I install your ROM in this way (https://tecnoblog.net/283069/como-instalar-lineageos-e-atualizar-o-seu-android/)?
Do you have any other instructions on installation, like a tutorial? Grateful
FERRETTO said:
Hello. Thanks for the ROM, I already downloaded it. I'm a bit of a layman about installing ROMs. I was confused to read your instructions. Can I install your ROM in this way (https://tecnoblog.net/283069/como-instalar-lineageos-e-atualizar-o-seu-android/)?
Do you have any other instructions on installation, like a tutorial? Grateful
Click to expand...
Click to collapse
Nope , instructions are pretty clear .. take your time
FERRETTO said:
Hello. Thanks for the ROM, I already downloaded it. I'm a bit of a layman about installing ROMs. I was confused to read your instructions. Can I install your ROM in this way (https://tecnoblog.net/283069/como-instalar-lineageos-e-atualizar-o-seu-android/)?
Do you have any other instructions on installation, like a tutorial? Grateful
Click to expand...
Click to collapse
Try with this instructions.
Tiki Thorsen said:
Try with this instructions.
Click to expand...
Click to collapse
Sorry for the ignorance, but the procedure is done by the cell phone or the computer?
FERRETTO said:
Sorry for the ignorance, but the procedure is done by the cell phone or the computer?
Click to expand...
Click to collapse
EDIT: You need both, a PC with ADB and the phone.
Tiki Thorsen said:
Cellphone.
Click to expand...
Click to collapse
Thanks, I'll try
Tiki Thorsen said:
EDIT: You need both, a PC with ADB and the phone.
Click to expand...
Click to collapse
Thanks
whodat711 said:
Nope , instructions are pretty clear .. take your time
Click to expand...
Click to collapse
The instructions are clear yes. Thanks
Tiki Thorsen said:
EDIT: You need both, a PC with ADB and the phone.
Click to expand...
Click to collapse
How do you unlock the Bootloader. I did all the steps until I got the key.
fastboot oem get_unlock_data
(bootloader) Unlock data: Key
But on the Motorola website it says "Your device does not qualify for bootloader unlocking.". What to do ?
Mine is the Motorola XT-1944-4
FERRETTO said:
How do you unlock the Bootloader. I did all the steps until I got the key.
fastboot oem get_unlock_data
(bootloader) Unlock data: Key
But on the Motorola website it says "Your device does not qualify for bootloader unlocking.". What to do ?
Mine is the Motorola XT-1944-4
Click to expand...
Click to collapse
If you follow the steps in the motorola website and it says is not unlockable, you are out of luck.
I sugguest you re-redo the firts steps since I had that same model and I was able to unlock de bootloader.
Sorry, double post.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions here
Downloads:
Builds: https://exynoobs.github.io/OTA/
GApps: MindTheGapps
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
DO NOT Report bugs if you're using TWRP
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
DeHuMaNiZeD
Linux4
Synt4x.93
Alastor89
Device tree and kernel source code:
Exynoobs github
Requirements:
S based firmware (OneUI4)
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and magisk by repeating above step
with their zip/apk
Known issues:
VoLTE/VoWiFi
Google maps
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Gonna try this out later. Nice!
Looks awesome!
NOTE: z3s (Galaxy s20 ultra) and y2s (galaxy s20 plus) builds are still uploading, hold tight
Nice ! Thank you so much for the great work and effort put into this
Two questions:
1. Is 5G working as it is not anymore in the "known issues" section ?
2. When using the latest S firmware is a dirty flash from LOS 18.1 possible ?
Cheers !
flunkyball said:
Nice ! Thank you so much for the great work and effort put into this
Two questions:
1. Is 5G working as it is not anymore in the "known issues" section ?
2. When using the latest S firmware is a dirty flash from LOS 18.1 possible ?
Cheers !
Click to expand...
Click to collapse
I am not sure about 5G as i only have a 4G device. Otherwise the devices are same
about 2. Dirty flashing could Theoretically work but i really cannot guarantee it. You can always try updating only the firmware for your device by going here https://github.com/Linux4/firmware-update/releases and finding your device and flashing everything with heimdall with the provided command, then try dirty flashing without wiping.
All three builds are uploaded now, enjoy!
Exelent ROM for people like me that dislike oneui and all its bloatware. Beside that this rom work so mutch better then the current oneui4 that feels slow and sluggish compared with los12.
Thanks Sent from my Nokia 3310 exynos 5g
Do anyone use lineageos rom to eyestrain but rom one ui not eyestrain ?
Impressive! Fingerprint scaner is working better then stock OneUI. Thank you!
DeHuMaNiZeD said:
Known issues:
High refresh rate
VoLTE/VoWiFi
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Click to expand...
Click to collapse
In your personal opinion, will we ever see 120Hz working on Los for S20?
Prosafe said:
Exelent ROM for people like me that dislike oneui and all its bloatware. Beside that this rom work so mutch better then the current oneui4 that feels slow and sluggish compared with los12.
Thanks Sent from my Nokia 3310 exynos 5g
Click to expand...
Click to collapse
how about camera? quality is good? gcam compatible?
Darkstriker said:
In your personal opinion, will we ever see 120Hz working on Los for S20?
Click to expand...
Click to collapse
I cannot say.
I can confirm that 5G is NOT working on the ROM
Also, VOLTE, VOWIFI, and Google assistant responding to my voice, are all broken
Can I get the lineage os 19 rom. It says I need authorization
DeHuMaNiZeD said:
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Click to expand...
Click to collapse
Thanks again to the team for your work.
I'm on G980FXXSCDUJ5 (S20 4G - x1s).
I was trying to upgrade to latest firmware G980FXXSCEUL9 before to load your 'lineage-19.0-20220111-UNOFFICIAL-x1s' but I have a problem.
According to me, two firmwares on your GitHub link are not corresponding to their designation:
-firmware-SM-G980F-G980FXXSCEUL9
-firmware-SM-G980F-G980FXXSCEUL7
(after download, sha256 hash controls are ok)
I've flashed these firmwares and the result for both is:
-G980FXXUCEUL6
-bootloader relocked
-On Download Mode screen, additional Japanese texts appear
I loaded back G980FXXSCDUJ5 from my datas.
Can you have a look ?
Thanks
seujo said:
Thanks again to the team for your work.
I'm on G980FXXSCDUJ5 (S20 4G - x1s).
I was trying to upgrade to latest firmware G980FXXSCEUL9 before to load your 'lineage-19.0-20220111-UNOFFICIAL-x1s' but I have a problem.
According to me, two firmwares on your GitHub link are not corresponding to their designation:
-firmware-SM-G980F-G980FXXSCEUL9
-firmware-SM-G980F-G980FXXSCEUL7
(after download, sha256 hash controls are ok)
I've flashed these firmwares and the result for both is:
-G980FXXUCEUL6
-bootloader relocked
-On Download Mode screen, additional Japanese texts appear
View attachment 5519777
I loaded back G980FXXSCDUJ5 from my datas.
Can you have a look ?
Thanks
Click to expand...
Click to collapse
Baseband version does not correspond to firmware upgrades. That means it doesnt need to be same as the firmware you flashed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS
ABOUTArrowOS is an AOSP based project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day, aiming to deliver smooth performance with better battery life.
Website : https://arrowos.net
Telegram Group : https://t.me/arrowos
Telegram Channel : https://t.me/arrow_os
Github : https://github.com/ArrowOS
Code Review : https://review.arrowos.net
Email : [email protected]
Blog : https://blog.arrowos.net
Paypal : https://www.paypal.me/TeamArrowOS
WHAT WORKS?Everything should works except the one mentioned in the bug list.
BUGS-TWRP can't decrypt data.
-You tell me.
INSTALLATIONCLEAN FLASH
-Flash latest 47.2.A.10.107 firmware with newflasher.
-Enter fastboot mode.
-Flash latest official TWRP.
-Boot into TWRP.
-Wipe data, cache & dalvik.
-Flash the ROM.zip followed by additional flashable like gapps/magisk.
-Format data and type "yes".
-Reboot system.
IF YOU'RE ALREADY ON ANDROID 12L ROMS
-Boot into TWRP.
-Wipe data, cache & dalvik.
-Flash the ROM.zip followed by additional flashable like gapps/magisk.
-Reboot system.
UPDATES
-Boot into TWRP.
-Wipe cache & dalvik.
-Flash ROM.zip.
-Reboot system.
CHANGELOGS07/04/2022
-Initial release.
DOWNLOADSROM
AFH Link
GAPPS RECOMMENDATION
MindTheGapps (12.1 ARM64).
MAGISK
HERE
SOURCESROM
Device Sources
Device Configurations (Maple)
Device Configurations (Yoshino)
Kernel Tree
Vendor Tree
Local Manifests
THANKS TOTux111, Rooted_Ansh, derf_elot, everyone in the Telegram Group.
Sorry if I missed someone.
ArrowOS for Sony Xperia XZ Premium
Device : Maple.
Build Type : Unofficial.
Build Variant : Vanilla, userdebug.
ROM Android OS Version : 12L.
ROM Kernel : 4.4.
ROM Firmware Required : 47.2.A.10.107.
Based On : AOSP.
Security Patch Level : March 2022.
Version Information
Status : Stable.
Current Stable Version : 12.1.
SELinux : Enforcing.
Created : 08/04/2022.
Last Updated : 04/04/2022.
Tested Rom, works well, but Android Auto Not working, Says connected to Car but wont Start.
hi,
i have a sony xperia xz premium (g8141) still running stock firmware and android 9, battery and phone in good shape, so why get a new one... Not sure if this is the right place to ask, but ... i'll give it a try ;-)
1) build is unofficial, but is it considered stable? e.g. crashes, freezes or the like?
2) is signature spoofing enabled? i want to avoid google apps and install microg instead.
Signature Spoofing
Free implementation of Play Services. Contribute to microg/GmsCore development by creating an account on GitHub.
github.com
3) one needs this TWRP version?
Sony Xperia XZ Premium
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Download TWRP for maple
Download TWRP Open Recovery for maple
dl.twrp.me
thx
m00ns0rr0w said:
hi,
i have a sony xperia xz premium (g8141) still running stock firmware and android 9, battery and phone in good shape, so why get a new one... Not sure if this is the right place to ask, but ... i'll give it a try ;-)
1) build is unofficial, but is it considered stable? e.g. crashes, freezes or the like?
2) is signature spoofing enabled? i want to avoid google apps and install microg instead.
Signature Spoofing
Free implementation of Play Services. Contribute to microg/GmsCore development by creating an account on GitHub.
github.com
3) one needs this TWRP version?
Sony Xperia XZ Premium
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Download TWRP for maple
Download TWRP Open Recovery for maple
dl.twrp.me
thx
Click to expand...
Click to collapse
hi!
1. yes it is stable like any other a12L roms beacuse it uses the same device, kernel, and vendor tree. even though it's unofficial.
2. yes arrowos have signature spoofing enabled. so it supports microg.
3. i personally use the latest twrp from the official website. https://dl.twrp.me/maple/twrp-3.6.1_9-0-maple.img.html
isosceleshampa said:
Tested Rom, works well, but Android Auto Not working, Says connected to Car but wont Start.
Click to expand...
Click to collapse
what gapps are you using? can you please provide a logcat?
hey,
wow, cool, what a fast answer thx!
ok, so it's stable (based on whatawurst iirc, clicked a while through the many pages), signature spoofing is enabled which allows microg (will be enough for me, just a couple of apps via aurora store, nothing fancy, and google apps stuff finally gone). sounds great!
last question: how often will there will be updates/releases? every x weeks/months? and if A12L is installed: OTA updates or flash always necessary? Just curious.
well, i think i'll give it a try, maybe easter weekend. flashed only one rom (/e/OS on a samsung s5) before, but, hey, what could possibly go wrong?
is there a mirror link? I can not visit google drive in my region. Thanks guys.
Hmm... just read this thread:
[ROM] LineageOS 19.1 UNOFFICIAL - 1.6 [2022-09-18]
LineageOS 19.1 for Sony Xperia XZ1 RELEASE This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features. Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything...
forum.xda-developers.com
Do i need a microSD card to flash? Or via adb sideload?
m00ns0rr0w said:
hey,
wow, cool, what a fast answer thx!
ok, so it's stable (based on whatawurst iirc, clicked a while through the many pages), signature spoofing is enabled which allows microg (will be enough for me, just a couple of apps via aurora store, nothing fancy, and google apps stuff finally gone). sounds great!
last question: how often will there will be updates/releases? every x weeks/months? and if A12L is installed: OTA updates or flash always necessary? Just curious.
well, i think i'll give it a try, maybe easter weekend. flashed only one rom (/e/OS on a samsung s5) before, but, hey, what could possibly go wrong?
Click to expand...
Click to collapse
rom will be updated accordingly to arrowos source. maybe it's monthly or when a new security patch is up.
m00ns0rr0w said:
Hmm... just read this thread:
[ROM] LineageOS 19.1 UNOFFICIAL - 1.6 [2022-09-18]
LineageOS 19.1 for Sony Xperia XZ1 RELEASE This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features. Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything...
forum.xda-developers.com
Do i need a microSD card to flash? Or via adb sideload?
Click to expand...
Click to collapse
if you have flashed a12 before, you need to put the files in microsd/usb otg/temp directory or install through adb sideload because the twrp can't decrypt data for now (in a12 roms). but if you're on stock rom or any stock based rom that isn't a12, then you can use the internal storage in twrp.
Cool, thank you. Yes, still stock rom. So only copy it to the internal storage and flash. Sounds easy
edit: ok, i think i can remember why - with one of the android9-followers encryption was introduced...
ok, couldn't wait and did the install. some problems during the installation, will report maybe later, but the boot into the system then succeeded. did some settings (clock, timezone etc.); the problem now: the system boot seems to hang.
i tried to transfer some files (contacts and apk for f-droid) but the copy somehow got stuck. I then tried a reboot, but after sony logo and the android robot head i see the moving/glowing arrow symbol. And that's it. boot process doesn't proceed. Well... what could be wrong?
LOL... i think i know what went wrong: for login i wanted to have a PIN, and the system offered me to secure the system boot with that PIN as well. I think the system got stuck when the PIN has to be entered - but i never get offered to enter the PIN. Great
hanlincn said:
is there a mirror link? I can not visit google drive in my region. Thanks guys.
Click to expand...
Click to collapse
sorry for taking a long time, here you go
Arrow-v12.1-maple-UNOFFICIAL-20220407-VANILLA.zip | by Aviellyan for Xperia XZ Premium
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
m00ns0rr0w said:
LOL... i think i know what went wrong: for login i wanted to have a PIN, and the system offered me to secure the system boot with that PIN as well. I think the system got stuck when the PIN has to be entered - but i never get offered to enter the PIN. Great
Click to expand...
Click to collapse
did you enable secure boot?
hm, no, never saw smth like "secure boot". As i said, the only thing that i can remember: i was asked for setting a PIN for screen unlocking, and there it was offered to use that PIN for system boot as well. Nothing else.
avl.callistá said:
sorry for taking a long time, here you go
Arrow-v12.1-maple-UNOFFICIAL-20220407-VANILLA.zip | by Aviellyan for Xperia XZ Premium
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
thx bro, you did a great thing.
strange, still having problems with my SIM card. System boots, asks for SIM PIN, but then says: "Service not available". German provider congstar (telekom daughter). By default no APN is elected (available: lebara internet and telekom internet); i added the congstar apn manually -> no difference, doesn't work.
i tried a different phone, a samsung galaxy s5, with lineageOS 18.1 - no problems there. Any related issues known? someone else has this problem?
created a logcat.txt via 'adb logcat -d > logcat.txt', is attached here. some congstar related messages, not sure if they help.
i can see a couple of error messages, probably not related, not sure if interesting ;-)
strange, now it works, phone calls work... the small radio cell icon shows 3-4 bars, but with an ! - very strange... i don't trust it at the moment, will check it regularly the next days.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions here
Downloads:
Builds: https://lineage.linux4.de
GApps: MindTheGapps
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
DO NOT Report bugs if you're using TWRP
DO NOT Report bugs while having Magisk installed (especially with Zygisk enabled)
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/Linux4/android_kernel_samsung_exynos9820/tree/lineage-20.0
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Bixby and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up, Bixby and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and Lygisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.
Features
SELinux enforcing
AES-256-XTS FBE encryption
All cameras are working
Ramdisk is working
Known issues
VoLTE/VoWiFi
You tell me
Likely more
My English is not very good, so I don't understand some things. My phone is Samsung Galaxy S10 (SM-G973F), Android 12, (HVG4). The bootloader is unlocked. I am confused by these instructions, and I would like to try this.
ZmisiS said:
My English is not very good, so I don't understand some things. My phone is Samsung Galaxy S10 (SM-G973F), Android 12, (HVG4). The bootloader is unlocked. I am confused by these instructions, and I would like to try this.
Click to expand...
Click to collapse
maybe to write what you don't understand
I don't understand:
Any Q, R or S based firmware installed on your device.
Flash lineage recovery (Get from here)
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
where i can find gapps 13 android?
kolyan2282 said:
where i can find gapps 13 android?
Click to expand...
Click to collapse
Google apps | LineageOS Wiki
wiki.lineageos.org
Thanks so much for working on our device, so exited to see this new version on Android on the s10, I will wait though for it to get more mature.
DOGASP said:
Google apps | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
Thanks... Should I try the one for Lineage 19? Ie (12L)?
Can few screenshots of the interface of this android?
ZmisiS said:
Can few screenshots of the interface of this android?
Click to expand...
Click to collapse
It looks mostly the same as AOSP Android 12-based ROMs.
ThePS4Gamer said:
It looks mostly the same as AOSP Android 12-based ROMs.
Click to expand...
Click to collapse
I never had AOSP installed, and I couldn't get to the images.
Has anyone installed this ROM? If it is, please write something about it for those of us who intend to install it. I hope that's not a problem?
I installed this and I need some samsung apps as well as google apps. I installed Gaaps 12.1. I don't have Google Play Store.
good morning, yes.
I reverted to stock ROM.
ZmisiS said:
I installed this and I need some samsung apps as well as google apps. I installed Gaaps 12.1. I don't have Google Play Store.
Click to expand...
Click to collapse
you can't install gaaps A12.1 on OS Android 13, i.e. you can, but it won't work, you need gaaps 13
ZmisiS said:
I installed this and I need some samsung apps as well as google apps. I installed Gaaps 12.1. I don't have Google Play Store.
Click to expand...
Click to collapse
unfortunately, you cannot have both on the AOSP system, you install gaaps for Google services, and you cannot run Samsung applications on AOSP or a pure Android system
@Linux4 will it work on G977N ?