[ROM] LineageOS 18.1 UNOFFICIAL [Updated 2022-03-23] [Discontinued] - Sony Xperia XZ Premium ROMs, Kernels, Recoveries,

[ROM] LineageOS 18.1 UNOFFICIAL [Updated 2022-03-23] [Discontinued] - Sony Xperia XZ Premium ROMs, Kernels, Recoveries,

LineageOS 18.1 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for fixing anything (preferably dmesg and logcat).
FEATURES
EAS kernel (thanks to @linckandrea )
Forced Encryption with FDE (Full Disk Encryption)
DOWNLOAD
Please check changelogs and download links at #2
maple (G8141):
twrp-3.5.0-0-20210117-maple
maple_dsds (G8142):
twrp-3.5.0-0-20210117-maple_dsds
INSTALLATION
Clean flash recommended when updating from Android 10 or stock:
1. Flash latest stock firmware (47.2.A.10.107) with newflasher.
2. Flash and boot the new twrp given in this thread.
3. Format data and wipe everything.
4. Flash the ROM, GApps (if needed) and root (if needed).
5. If you have IMS (VoLTE) working on stock, enable IMS in Settings - XperiaParts.
Note: If you are updating from Android 10 and can't boot the new TWRP, please backup your stuffs and format data by using either the old TWRP or fastboot -w. This is required because there are some adjusts in userdata image size to fix FDE encryption.
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
Google Apps
Both OpenGApps and NikGApps should work. You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. Open GApps for Android 11 is still in beta. You can download those releases here.
KNOWN ISSUES
WFD is not working
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Contributors
derf elot, modpunk, Rooted_Ansh, linckandrea
Telegram Group
[Tinder][EN/DE/♋] Xperia XZ Premium - Sticker Fightz Biatch
Development group for XZP - Lead by: Everyone Do not spam and cooperate with developers. Google first before asking any help
t.me
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Stable Release Date: 2022-03-23
Thread Information
Created 2021-01-21
Last Updated 2022-03-23

2022-03-23
Last build of Lineage 18.1 (and probably nobody needs this anymore)
Lineage 19.1 is already available, check this thread.
G8141: https://androidfilehost.com/?fid=14655340768118440781
G8142: https://androidfilehost.com/?fid=14655340768118440782
2021-10-7
irregular update
G8141: https://www.androidfilehost.com/?fid=7161016148664819265
G8142: https://www.androidfilehost.com/?fid=7161016148664819266
2021-6-29
irregular update
G8141: lineage-18.1-20210628-UNOFFICIAL-maple.zip
G8142: lineage-18.1-20210628-UNOFFICIAL-maple_dsds.zip
2021-3-31
March Security Update
Vulkan fix (thanks to @linckandrea )
New IMS implement (Please enable IMS option in Xperia Parts if you have IMS working on stock.)
EAS kernel (thanks to @linckandrea )
Forced Encryption since this release.
Download links:
G8141: lineage-18.1-20210331-UNOFFICIAL-maple.zip
G8142: lineage-18.1-20210331-UNOFFICIAL-maple_dsds.zip
2021-01-20
Initial release. Download links:
G8141:lineage-18.1-20210120-UNOFFICIAL-maple
G8142: lineage-18.1-20210119-UNOFFICIAL-maple_dsds

Reserved.

No1Alien said:
LineageOS 18.1 for Sony Xperia XZ Premium
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for fixing anything (preferably dmesg and logcat).
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
FDE Encryption support
DOWNLOAD
You can download the latest releases here:
maple (G8141):
twrp-3.5.0-0-20210117-maple
lineage-18.1-20210120-UNOFFICIAL-maple
maple_dsds (G8142):
twrp-3.5.0-0-20210117-maple_dsds
lineage-18.1-20210119-UNOFFICIAL-maple_dsds
INSTALLATION
Clean flash recommended when updating from Android 10 or stock:
1. Flash latest stock firmware (47.2.A.10.107) with newflasher.
2. Flash and boot the new twrp given in this post.
3. Flash the ROM, GApps (if needed) and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
Google Apps
Both OpenGApps and NikGApps should work. You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. Open GApps for Android 11 is still in beta. You can download those releases here.
KNOWN ISSUES
WFD is not working yet (waiting for new non-BSP blobs)
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Contributors
derf elot, modpunk, Rooted_Ansh
Telegram Group
[Tinder][EN/DE/♋] Xperia XZ Premium - Sticker Fightz Biatch
Development group for XZP - Lead by: Everyone Do not spam and cooperate with developers. Google first before asking any help
t.me
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Stable Release Date: 2021-01-21
Thread Information
Created 2021-01-21
Last Updated 2021-01-21
Click to expand...
Click to collapse
Awesome work mate!

just tried flashing twrp to my phone (single sim) running aosp 11, and it couldnt get past the splash screen.
also tried fastboot booting the image,and it just hangs on the sony logo.
it could be the kernel im using, ill try a complete wipe and reinstall of this rom and twrp tonight.
EDIT: flashing stock rom to start fixed it. everything works as it should now.

Gcam desteği?

The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.

ted5300 said:
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
Click to expand...
Click to collapse
On my g8141 all things work. I have flash twrp 3.5 with old 3.4 . Format data,reboot twrp,format data,reboot back to twrp. After this 2 format,i flash the rom+gapps mini.(no reflash stock)All runs good. But i miss the PixelExp

ted5300 said:
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
Click to expand...
Click to collapse
i was having the same issue, i fixed it by flashing back to stock firmware before flashing twrp and this rom.
now running twrp 3.5.0 and lineageos 18.1 rooted with magisk 21.4 with no issues.

born2bkilled said:
just tried flashing twrp to my phone (single sim) running aosp 11, and it couldnt get past the splash screen.
also tried fastboot booting the image,and it just hangs on the sony logo.
it could be the kernel im using, ill try a complete wipe and reinstall of this rom and twrp tonight.
EDIT: flashing stock rom to start fixed it. everything works as it should now.
Click to expand...
Click to collapse
ted5300 said:
The twrp-3.5.0-0-20210117-maple isn't working well on G8141 model with this ROM. I've using twrp 3.2.1 and I can say that it is more stable. I've seen that after the flashing I cannot reach the TWRP after reboot and I need to reinstalling the TWRP again. With others ROM's the issue not exist.
Click to expand...
Click to collapse
No1Alien said:
Note: If you are updating from Android 10 and can't boot the new TWRP, please backup your stuffs and format data by using either the old TWRP or fastboot -w. This is required because there are some adjusts in userdata image size to fix FDE encryption.
Click to expand...
Click to collapse

Thank you for your feedback, but the situation is the same with TWRP. I've used fastboot -w. nothing changed. Then I format data from the new TWRP 3.5 and after reboot I can't go to TWRP again. Some other ideas what I can try? Regards

ted5300 said:
Thank you for your feedback, but the situation is the same with TWRP. I've used fastboot -w. nothing changed. Then I format data from the new TWRP 3.5 and after reboot I can't go to TWRP again. Some other ideas what I can try? Regards
Click to expand...
Click to collapse
Start from stock ROM. Use xperifirm to download the latest stock Rom and use newflasher to flash it. Then flash twrp, lineage and magisk.
Thats how I did it.

Thanks for your hard work on this. Flashed this, working great, love having 2 day battery life. With NO gapps. It’s all about privacy
Hopefully you are still working on is

First of all: Many thanks for spending all the effort to create this ROM for the old Sony XZ Premium!!!
So far I was using Bliss ROM but the new Android security issues made me to wake up and look for something fresher ;-)
I do have a G8141 (German) device. Flashing worked quite well and the system was booting up quickly. (ROM+TWRP 3.5+openGApps nano+Magist 21.4)
So far I detected just one issue yet which I would like to report:
WLAN and mobile connection not stable. I required me 4 reboot attempts to get a more stable connection. WLAN was constantly dropping out and only a reboot at the end made the device to reconnect. Same for cellular connection. After around 4 reboots I have a stable connection now.
I will monitor the behaviour and hopefully it will become stable after all Google Apps are installed etc..
I will let you know.

NFec__ said:
First of all: Many thanks for spending all the effort to create this ROM for the old Sony XZ Premium!!!
So far I was using Bliss ROM but the new Android security issues made me to wake up and look for something fresher ;-)
I do have a G8141 (German) device. Flashing worked quite well and the system was booting up quickly. (ROM+TWRP 3.5+openGApps nano+Magist 21.4)
So far I detected just one issue yet which I would like to report:
WLAN and mobile connection not stable. I required me 4 reboot attempts to get a more stable connection. WLAN was constantly dropping out and only a reboot at the end made the device to reconnect. Same for cellular connection. After around 4 reboots I have a stable connection now.
I will monitor the behaviour and hopefully it will become stable after all Google Apps are installed etc..
I will let you know.
Click to expand...
Click to collapse
Finally I am giving up. I am not able to get a stable WLAN or cellular connection. After installing it again and again (format data twice, factory reset etc., starting all over with latest stock FW) am not getting it working properly. After 1-2 hours, WLAN is not able to connect anymore and cellular is detected incl. carrier but dropping off and data connection not possible to establish.
Really strange was the latest/ last Sony FW everything works. With other ROMS I am running into similar problems. Sometimes cellular is not detected, but WLAN works and sometimes both are not working. Last fully working alternative ROM was Bliss from late September 2020. After reading that several of you are successfully using this ROM I start to believe that this is perhaps a problem with my device made for the German market...

Is there an option to hide the "hide keyboard" button at the bottom while typing? I've already used full gesture but it still shows a bar with hide keyboard button at the bottom while typing.
Thanks OP for bringing LOS18 to maple!!

The best Android 11 ROM. Using it for over a week and everything works. Battery life is two days with regular use.

Weird, after installation and enter the SIM pin and connect to the Wi-Fi network, it take me charge directly from the carrier network for data. Sould be better what connection I will choose during the first installation as primary (Wi-Fi or mobile ) and not connecting by default directly to the mobile internet. With others Android 11 ROMs this issue not exits. Some thoughts?

fastboot -w
install twrp-3.5.0-0-20210117-maple
install lineage-18.1-20210120-UNOFFICIAL-maple from twrp
I want to install gapps but after first run i cannot back to twrp - when I try to run in recovery mode I only see black screen.
I try to install oldest twrp - no results.
Any idea what is the problem ?

Margiel said:
fastboot -w
install twrp-3.5.0-0-20210117-maple
install lineage-18.1-20210120-UNOFFICIAL-maple from twrp
I want to install gapps but after first run i cannot back to twrp - when I try to run in recovery mode I only see black screen.
I try to install oldest twrp - no results.
Any idea what is the problem ?
Click to expand...
Click to collapse
That’s what just happened to me. But I didn’t install gapps. Just went black screen, won’t boot up. Also I’ve had it running for about 3-4 weeks with no issues. Now this. Can’t even get into twrp

Related

[ROM][TAIMEN][10.0][UNOFFICIAL]crDroid[V6.9][2020-08-08]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Unofficial crDroid v6.9*
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
<<< WARNING >>> <<< WARNING >>> <<< WARNING >>>
Please note that this is still under development,
so don't install unless you want to live with some bugs
crDroid is designed to increase performance and reliability over stock
Android for your device also attempting to bringing
many of the best features existent today
Rom Features !!!!!
What's working
RIL (Calls, SMS, Data)
Bluetooth
Wi-Fi
Camera
Video Recording
Video Playback
Audio ( Record and Playback )
Sensors
Flash
Led
What's not working ?????
........
.........
Downloads
Rom's with PixelGrapps
Pixel Factory Images
TWRP for Pixel 2 XL
su-addon or Magisk
Installation
1. Download the latest supported Android Q Factory Images, crDroid build and TWRP installer
( 2.) Execute ./flash-all.sh (Unix) or flash-all.bat (Windows) inside the extracted factory image archive.
3. Fastboot into TWRP recovery
4. Swipe to Factory Reset
5. Flash the latest build of crDroid
6. Flash the latest TWRP installer
7. Reboot to recovery in TWRP (this will reboot you into the other slot)
8. Flash a custom kernel (optional)
9. Reboot to system
Updates
Update to the latest factory images and repeat steps 5 - 10.
Credits
Sultanxda
razorloves
Lunarixus
LineageOS Team
DirtyUnicorns
Version Information
Status: Stable
Current Version: 6.9
Created 2019-10-16
Last Updated 2020-08-08

Reserved

How should gapps be flashed on this?
Can't get it to boot
Edit- new build works great

New Build up
Rom with PixelGrapps

error code 20 when installing openGapps cannot be installed always gives that error the gapps

ismael47 said:
error code 20 when installing openGapps cannot be installed always gives that error the gapps
Click to expand...
Click to collapse
You don’t need gapps.
Pixel Gapps Are at the Rom

Blackjubel said:
You don’t need gapps.
Pixel Gapps Are at the Rom
Click to expand...
Click to collapse
what features this rom has? will it be supported through the year, maybe become official? Thanks @Blackjubel

Blackjubel said:
* Unofficial crDroid v6.0*
crDroid is designed to increase performance and reliability over stock
Android for your device also attempting to bringing
many of the best features existent today
Rom Features !!!!!
What's working
RIL (Calls, SMS, Data)
Bluetooth
Wi-Fi
Camera
Video Recording
Video Playback
Audio ( Record and Playback )
Sensors
Flash
Led
What's not working ?????
........
.........
Downloads
Rom with PixelGrapps
Pixel Factory Images (QP1A.191005.007.A1)
TWRP for Pixel 2 XL
su-addon or Magisk
Installation
1. Download the latest supported Android Q Factory Images, crDroid build and TWRP installer
( 2.) Execute ./flash-all.sh (Unix) or flash-all.bat (Windows) inside the extracted factory image archive.
3. Fastboot into TWRP recovery
4. Swipe to Factory Reset
5. Flash the latest build of crDroid
6. Flash the latest TWRP installer
7. Reboot to recovery in TWRP (this will reboot you into the other slot)
8. Flash a custom kernel (optional)
9. Reboot to system
Updates
Update to the latest factory images and repeat steps 5 - 10.
Credits
Sultanxda
razorloves
Lunarixus
LineageOS Team
DirtyUnicorns
Version Information
Status: Beta
Current Version: 6.0
Created 2019-10-16
Last Updated 2019-10-18
Click to expand...
Click to collapse
How to unlock system files?

Awesome. Was wondering if this Rom enables wifi calling?

Very encouraged to see custom Android 10 ROMs for our trusty Pixel2 XLs. Here is my experience. I first flashed crDroid clean over stock Android 10, rebooted, installed Magisk 20.0. I cannot get root. Everything else looked beautiful. Repeated. No success with root. Reflashed October stock and fully configured phone and restored data with Titanium Backup. Everything in order. Then I dirty flashed crDroid over stock and I repeatedly got stuck at the boot animation "eye". I let it sit for a half and hour and it never finished booting. So I went back to stock until you can work this out. It is hard not to feel discouraged, but I realize this is a beta. But it looks very promising! I'll eagerly anticipate and try your next build.

Bverns88 said:
Awesome. Was wondering if this Rom enables wifi calling?
Click to expand...
Click to collapse
Yes

almahix said:
Very encouraged to see custom Android 10 ROMs for our trusty Pixel2 XLs. Here is my experience. I first flashed crDroid clean over stock Android 10, rebooted, installed Magisk 20.0. I cannot get root. Everything else looked beautiful. Repeated. No success with root. Reflashed October stock and fully configured phone and restored data with Titanium Backup. Everything in order. Then I dirty flashed crDroid over stock and I repeatedly got stuck at the boot animation "eye". I let it sit for a half and hour and it never finished booting. So I went back to stock until you can work this out. It is hard not to feel discouraged, but I realize this is a beta. But it looks very promising! I'll eagerly anticipate and try your next build.
Click to expand...
Click to collapse
Boot into twrp and flash cr Droid Rom and custom kernel (if you have one). Reboot and let it load. Boot back into twrp and flash magisk 20.0 zip and reboot.

almahix said:
Very encouraged to see custom Android 10 ROMs for our trusty Pixel2 XLs. Here is my experience. I first flashed crDroid clean over stock Android 10, rebooted, installed Magisk 20.0. I cannot get root. Everything else looked beautiful. Repeated. No success with root. Reflashed October stock and fully configured phone and restored data with Titanium Backup. Everything in order. Then I dirty flashed crDroid over stock and I repeatedly got stuck at the boot animation "eye". I let it sit for a half and hour and it never finished booting. So I went back to stock until you can work this out. It is hard not to feel discouraged, but I realize this is a beta. But it looks very promising! I'll eagerly anticipate and try your next build.
Click to expand...
Click to collapse
I'm trying this tomorrow. But from what I understand. After you are on stock ROM and reset. You flash ROM and TWRP 3.3, then reboot and let it load. Then flash magisk and reboot to system.

What about Goole Pay? Is it work?

So I've installed the rom everything seems to work, flashed a clean factory image
didn't setup the phone after a install but got enough done to enable developer options
transferred crdroid image / twrp zip / Elemental Kernal / magisk
cts & basicintegrity fail... anything i can do to fix this or is this just something I would have to live with?

co4 said:
So I've installed the rom everything seems to work, flashed a clean factory image
didn't setup the phone after a install but got enough done to enable developer options
transferred crdroid image / twrp zip / Elemental Kernal / magisk
cts & basicintegrity fail... anything i can do to fix this or is this just something I would have to live with?
Click to expand...
Click to collapse
Trying using MagiskHide Props Config module.
Sent from my Pixel 2 XL using Tapatalk

Is there an option to swipe down to clear all?
Ok Google working?

Bverns88 said:
Boot into twrp and flash cr Droid Rom and custom kernel (if you have one). Reboot and let it load. Boot back into twrp and flash magisk 20.0 zip and reboot.
Click to expand...
Click to collapse
That is what I have done. No root even with magisk. (I tried 19.3 and 20.0.)

Hi,
Thank you for the Rom!
Is working very good on my device
I encountered no issues yet.
I have one question, ist there a possibility to enable q gestures?

Cydras said:
Hi,
Thank you for the Rom!
Is working very good on my device
I encountered no issues yet.
I have one question, ist there a possibility to enable q gestures?
Click to expand...
Click to collapse
Stock navbar settings. In there

[ROM][UNOFFICIAL][Android 11] LineageOS 18.1 [joyeuse/miatol][22/01/21]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....

Perfect will try tonight

Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?

There are so many Joyeuse LineageOS ROMs I don't even know where to start.

i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours

Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?

sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.

Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk

Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!

Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?

gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.

Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too

does magisk 21 work on the latest build? really excited for android 11

So this will not be compatible with curtana devices?

Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??

everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use

Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse

there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge

Why is today's build 590MB while all others are 1.1GB?

pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager

[ROM][11.0][Miatoll] DerpFest ROM -EVERY WORKS [Unofficial][2021-01-17]

Changelogs:
2021. 01.17.
* 2021. jan security patch with updated fingerprint. Use Kdragon magisk patch for working cts.
* many new customizations /edge lighting + etc.../
2021. 01.03.
* Bluetotth fixed
* many new customizations
2020.12.22.
*Initial build /bluetooth bugs/

Screenshoots:

How to be decrypt??do I need to format all the time when I flash a rom??

ZeroVirus said:
How to be decrypt??do I need to format all the time when I flash a rom??
Click to expand...
Click to collapse
Which recovery use you?

Note::: @ A11 ROMS in Orangefox recovery always disable lockscreen and fingerpsint, so you can enter the recovery and will visible files..............

Will Bluetooth audio work?

bezke said:
First time installation:
If coming from any other ROM, it's recommended to flash MIUI 12 and boot to it once in order to update firmware.
Backup your data to PC, OTG flash drive
Reboot to recovery
Factory reset from recovery and format data (where you type "yes")
Reboot to recovery
Flash crDroid zip and TWRP installer zip
Reboot to recovery
Flash gapps and reboot to system
After passed setup screen, reboot to TWRP and flash Magisk zip
Enjoy
Update installation:
Through recovery:
Boot to recovery (optional make a backup)
Flash updated Derp rom zip and TWRP installer zip then reboot to recovery
Flash gapps, Magisk and reboot to system
Enjoy
Click to expand...
Click to collapse
Your steps don't make sense, the first install steps refer to crDroid when this is Derpfest, it also says to flash twrp via recovery when the default MIUI recovery does NOT have any option to do so or to flash any other zips (when in fact your link is of OrangeFox, that isn't TWRP) and both the "first time" and "update instructions" steps say to flash gapps when in bold letters above the link you say not to flash them.
clean up your post bruh, because these steps look like a copypaste ya took from a crDroid thread you grabbed

Update added!
Fixed bluetoth..
& Many new settings

I'm facing an issue. Gboard has a bad layout. I like the ROM but that bug is annoying to me

bezke said:
Update added!
Fixed bluetoth..
& Many new settings
Click to expand...
Click to collapse
You may wish to update the "TWRP" link in your OP to point to the "miatoll" folder (instead of "curtana" - which will only lead to a dead link).

is there a version of your rom without GAPPS?

@bezke
Hi, master.
I have a joyeuse and unfortunately it doesn't flash.
I think it's bad access to /system.
No Android 11 works on my joyeuse here on xda and unfortunately there aren't many phones here.
I tried your Android 10 RR, which works like a charm.
But unfortunately I'm not lucky with Android 11. I think the problem is in the dynamic partition (/system_root, /vendor, /product). Twrp can't mount it.

LiberteCzech said:
@bezke
Hi, master.
I have a joyeuse and unfortunately it doesn't flash.
I think it's bad access to /system.
No Android 11 works on my joyeuse here on xda and unfortunately there aren't many phones here.
I tried your Android 10 RR, which works like a charm.
But unfortunately I'm not lucky with Android 11. I think the problem is in the dynamic partition (/system_root, /vendor, /product). Twrp can't mount it.
Click to expand...
Click to collapse
which TWRP are you using?
i have installed the OrangeFox Recovery project and it works.
you must follow certain procedure and should be fine.
Not every Android 11 works for me but it is not due to access to the partitions (at least i believe)
i had problems with SimCards which were not recoginized.
at this moment i had installed the Legion Rom based on the Android 11.
works well, Magisk installed, Fdroid with all apps too.
Safetynet passed.
netflix runs w/o issues.
i followed this procedure:
1- install TWRP (Russian one exe file) and enter TWRP.
2 - click on Wipe, then on Format Data -> type "yes" (this will decrypt the phone)
3 - restart the phone to TWRP
4 - In TWRP, i installed the OrangeFox Recovery Project (Version 11 Alpha)
5 - Restart to System
you can find all links to download below:
TWRP / Orangefox recovery for Redmi Note 9 Pro (Joyeuse)
Edit April 29, 2023: - Latest MIUI.EU ROM MIUI14 based on Android 12: V14.0.3.0 - Fastboot install file, because Android 12 recovery was not yet available at the time of production...
xiaomi.eu
btw, i tried:
- Carbon (there were some missing features) - https://forum.xda-developers.com/t/rom-unofficial-11-0-carbonrom-cr-9-0-miatoll.4210823/
- Fluid (worked more than well) - https://forum.xda-developers.com/t/...-fluid-1-1-for-miatoll.4212633/#post-84226211
- LegionOS - https://forum.xda-developers.com/t/...rtana-excalibur-gram-joyuese-unified.4188403/
i had problems with:
- Pixel Experience (not recognized SimCards)
- LineageOS (crashing)
hope it helps you a bit.

@Seba_Poland
I tried these.
I didn't try OrangeFox because I think there is a problem with encryption, as Bezke wrote, if I understand it good..
twrp-3.4.0-14-curtana-unified-mauronofrio
PBRPMiatoll20201014
PBRP-miatoll-3.0.0-20201101-1929-BETA
TWRP-3.4.1B-joyeuse-fix.img
I'll probably try.
*I use magisk hide, magisk hide props and gpay fix, so the safety net works well for me. I do not use Netflix, I cannot confirm.

LiberteCzech said:
@Seba_Poland
I tried these.
I didn't try OrangeFox because I think there is a problem with encryption, as Bezke wrote, if I understand it good...
Click to expand...
Click to collapse
OrangeFox has no problem with encryption.

DarthJabba9 said:
OrangeFox has no problem with encryption.
Click to expand...
Click to collapse
I noticed there is a new version, beta R11.0.1 of the OrangeFox. is it worth to install?

LiberteCzech said:
@Seba_Poland
I tried these.
I didn't try OrangeFox because I think there is a problem with encryption, as Bezke wrote, if I understand it good..
Click to expand...
Click to collapse
Try latest OrangeFox ( 30 December 2020 ), the "decryption issues with custom Android 11 ROMs" fixed, you can find here: https://orangefox.download/device/miatoll
I have experience with Orangefox recovery on my previous phone, is the best recovery for Redmi note 7, using now on my note 9pro too, DarthJabba9 is a great developer.

vlouis said:
Try latest OrangeFox ( 30 December 2020 ), the "decryption issues with custom Android 11 ROMs" fixed, you can find here: https://orangefox.download/device/miatoll
I have experience with Orangefox recovery on my previous phone, is the best recovery for Redmi note 7, using now on my note 9pro too, DarthJabba9 is a great developer.
Click to expand...
Click to collapse
exectly, i updated and it has encrypted the partitions w/o issues.
btw. i have same experience with RN7 and OrangeFox.
the only bottleneck is the backup restore. it took some time until i released how to proceed.

@Seba_Poland @vlouis @DarthJabba9
All right, guys!
So OrangeFox the only recovery with which I can flash Android 11 and the system will boot!
Other recoveries must have a problem on Joyeuse.
Thanks for the help!

[ROM] LineageOS 19.1 UNOFFICIAL - 1.3 [vendor & FBE] [2022-04-20]

LineageOS 19.1 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
Real vendor partition
FBE instead of FDE encryption
DOWNLOAD
You can download the latest releases and TWRP here:
https://androidfilehost.com/?w=files&flid=333825
Check the ChangeLog below for firmware requirements!
INSTALLATION
This build uses a real vendor partition in place for the (now) useless oem partition. You will therefore need the modified TWRP with vendor/FBE support linked above.
Before first install: flash and boot into TWRP, format data, reboot to recovery and wipe all internal partitions.
After above step / any subsequent dirty flashes: Boot into recovery, put the ROM, GApps and root (if needed) on sdcard and flash.
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM, together with any GApps and/or other modifications - addon.d will not work due to currently unavailable TWRP decryption.
Recommended GApps: MindTheGapps-12.1.0
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, No1Alien, sohrab1985
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 12.1 / 12L
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.3
Stable Release Date: 2022-04-20

SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.

REQUIRED FIRMWARE: 47.2.A.10.107 (47.2.A.11.239 should also work as there isn't any real changes)
CHANGELOG
2022-04-20 | 1.3| 47.2.A.10.107
Initial release

Thanks for your work. And can the kernel support f2fs filesystem？ Does the camera work if i use another gpu driver？

ssdsw said:
Thanks for your work. And can the kernel support f2fs filesystem？ Does the camera work if i use another gpu driver？
Click to expand...
Click to collapse
f2fs is enabled in the kernel ( https://github.com/whatawurst/andro...8998-yoshino-maple_dsds_defconfig#L4632-L4636 ), but that doesn't mean you can use it as is. You would have to adjust the fstab's. No that I would recommend it, seeing as f2fs hasn't really received a lot of updates/(security) fixes for 4.4 kernels in recent times.
And no, you cannot update the gpu drivers. The Sony stock camera blobs are quite dependent on a specific tag.

derf elot said:
f2fs is enabled in the kernel ( https://github.com/whatawurst/andro...8998-yoshino-maple_dsds_defconfig#L4632-L4636 ), but that doesn't mean you can use it as is. You would have to adjust the fstab's. No that I would recommend it, seeing as f2fs hasn't really received a lot of updates/(security) fixes for 4.4 kernels in recent times.
And no, you cannot update the gpu drivers. The Sony stock camera blobs are quite dependent on a specific tag.
Click to expand...
Click to collapse
is there any clues/guide on how to edit the fstab?
so we can use f2fs on data & cache

is signature spoofing (for microg) enabled?
and as i already have installed the ArrowOS build of avl.callista which is based on your work: flash Stock ROM and then install your twrp+rom? or is stock rom step not necessary and it's enough to flash twrp+rom?

m00ns0rr0w said:
is signature spoofing (for microg) enabled?
and as i already have installed the ArrowOS build of avl.callista which is based on your work: flash Stock ROM and then install your twrp+rom? or is stock rom step not necessary and it's enough to flash twrp+rom?
Click to expand...
Click to collapse
no, spoofing is not enabled. I have made builds for 19 before with spoofing enabled, so it works. but rebuilding with spoofing enabled takes a while every time, since it includes changes in fw/b and that's a hefty compile.
as for flashing over another rom: it may or may not work. upgrading from los 18 should work by flashing rom together with 12.1 microg, but no idea about migrating from one rom to another.

derf elot said:
no, spoofing is not enabled. I have made builds for 19 before with spoofing enabled, so it works. but rebuilding with spoofing enabled takes a while every time, since it includes changes in fw/b and that's a hefty compile.
as for flashing over another rom: it may or may not work. upgrading from los 18 should work by flashing rom together with 12.1 microg, but no idea about migrating from one rom to another.
Click to expand...
Click to collapse
hi,
thx for your answer. i was just curious, as the arrowos build is based on your work and has signature spoofing enabled. But if, as you write, that's a lot of work then ... no problem. the arrowos version is stable
And, without signature spoofing, the part with "howto best migrate from rom A to rom B" is obsolete Self-building doesn't seem to be an option, as the hardware requirements seem a bit ... ambitious

Thanks for the great ROM.
I did a few tests today and I couldn't find anything broken.
The only issue I have found so far is when I take a picture or video with Open Camera and try to open it for preview inside the app. It does not work.

Thanks for your working on the ROM.
I found that LOS installed on my G8142 seems to have screen always on when charging, both on 18.1 and 19.1 (which is this one). How to turn it off?

Very nice, THANK YOU for great rom, i am testing it rn, so far so good.
To save someone a troubles i encountered:
I am comming from rooted stock .107, please all do flash correct TWRP!!! , i was slopy but have experience in flashing so i just dirtyflashed it on old TWRP, phone hanged prior to accessing twrp, could not hardreset or annything haha and i had to pull my battery so please just in case FLASH CORRECT TWRP
I like it alot, am switching to daily

stipi69 said:
Very nice, THANK YOU for great rom, i am testing it rn, so far so good.
To save someone a troubles i encountered:
I am comming from rooted stock .107, please all do flash correct TWRP!!! , i was slopy but have experience in flashing so i just dirtyflashed it on old TWRP, phone hanged prior to accessing twrp, could not hardreset or annything haha and i had to pull my battery so please just in case FLASH CORRECT TWRP
I like it alot, am switching to daily
Click to expand...
Click to collapse
Great, yes it needs the twrp I uploaded because of vendor partition and change from fde to fbe.
But just for reference, pulling the battery should not be necessary if it gets stuck. it should be enough to press and hold vol up (or down, I forget because I haven't needed it in a while) + power. it'll vibrate once, but keep holding it until it vibrates twice in quick succession. that should power it off. you can then enter fastboot to flash twrp or flash mode to flash stock.

derf elot said:
Great, yes it needs the twrp I uploaded because of vendor partition and change from fde to fbe.
But just for reference, pulling the battery should not be necessary if it gets stuck. it should be enough to press and hold vol up (or down, I forget because I haven't needed it in a while) + power. it'll vibrate once, but keep holding it until it vibrates twice in quick succession. that should power it off. you can then enter fastboot to flash twrp or flash mode to flash stock.
Click to expand...
Click to collapse
I agree, but i have faulty vol+ key so i was having a hard part sadlly.
Can i ask you something i see this problem 1+ years on all Lineage roms and i am not a developer:
SETTINGS / DISPLAY / LIVE DISPLAY / COLOR PROFILE / VIVID
If i choose this profile i get like 8 bit colors after a while of use, but realy like this profile... i adjusted it manualy now its good looking and stable but wondering if it is XZ P specific or all lineage

short message: my SIM card isn't working with this ROM.
long message: today i installed this ROM. I first flashed stock ROM, booted into it once, and then flashed this ROM. But, as with the ArrowOS ROM, my SIM card isn't working.
More Details: after fresh install of this ROM and during boot i enter the SIM PIN (so that works), but after boot it says: "service not available" (Dienst nicht verfügbar). I'm unable to get it working.
Provider: congstar (telekom daughter). The SIM worked with stock ROM, and it works in an older Samsung S5. Just for curiosity i flashed stock ROM again and
Yeah, i know, no warranty, but... someone had such a problem before?
thx

geee... getting crazy here... after the next (test) flash of this ROM the SIM suddenly works, as well as phone calls, SMS, ...
what's the difference to the first flash? after latest stock ROM flash i left the SIM inside, and the stock ROM (or the telekom software) did some settings, rebooted, and then i started the last flash. Is there something magic that is happening here?
if i had more hair all of it would be bright gray...

OK, after almost a week... no SIM card problems anymore. ROM is running stable.
Just some apps that somehow rely on Google Play Services (or microg maybe) don't run: apps that warn regarding severe weather conditions or catastrophes, like 'DWD Warnwetter', 'NINA KatWarn' etc.. Push notifications...

ROM is stable, and i finally managed the signature spoofing + microg stuff. Thx to @Yokurt815 and his little list in the XZ1C thread - going step by step, writing it all down, finally succeeded.
Am i right that the magisk/lygisk stuff has to be done again after flashing an possibly upcoming ROM update?

Big thanks to @derf elot for this rom
A couple of things though . . .
Anyone got this setting to turn on?
All languages set to English AU
Mind the gapps 12.1 installed
Google set to default assistant
Also, trying to search in settings causes a crash.

shoey63 said:
Big thanks to @derf elot for this rom
A couple of things though . . .
Anyone got this setting to turn on?
All languages set to English AU
Mind the gapps 12.1 installed
Google set to default assistant
Also, trying to search in settings causes a crash.
View attachment 5643169
Click to expand...
Click to collapse
Edited: NVM, seems like it won't work neither.
You need to set Ok Google/Hey Google at first boot; otherwise, it won't work.

[ROM] LineageOS 20.0 UNOFFICIAL - 1.2 [2023-05-10]

LineageOS 20.0 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
You can download the latest releases and TWRP here:
ROM:
https://sourceforge.net/projects/yoshino/files/maple/lineage-20.0/
TWRP:
https://sourceforge.net/projects/yoshino/files/maple/twrp/
Suggested Gapps (MindTheGapps) - choose 13.0.0/arm64:
https://androidfilehost.com/?w=files&flid=322935
or
http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Check the ChangeLog below for firmware requirements!
INSTALLATION
Before first install: flash and boot into the TWRP provided in this thread, format data, reboot to recovery and wipe all internal partitions, then flash the ROM, GApps and root (if needed).
Or if you are coming from Lineage 19.x, dirty flash to 20.0 is possible too: flash the new TWRP, ROM, and GApps, su addons (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM is enough, decryption in new TWRP works now
Recommended GApps: MindTheGapps provided in this thread. (Important to flash with rom)
KNOWN ISSUES
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2023-05-10
All credits goes to derf elot and all the other developers involved, I only post it.

SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.

REQUIRED FIRMWARE:
CHANGELOG
2023-05-10 | 1.2 | 47.2.A.10.107
Updated to T QPR2 release (LineageOS upstream)
Updated to May 2023 Security updates (both ROM and kernel)
Our kernel now includes updates by CIP and is up-to-date with tag st40 - thanks also to Flamefire for help with some of these (1)
Reduced zram size to 25% (1gb) of out total RAM to have more to use freely
Updated BT stuff for QPR2 (maybe offloading is working again? needs confirmation)
Added the option to reflash the mbn via OpenCS (see Xperia Parts) - thanks also to shank03 & Flamefire (2)
Fully enabled IMS on Congstar Germany via overlay on lilac
Possibly some battery/performance optimizations here and there
Fixed Android Auto support
Added new LineageOS "Charging control hal" for battery charging care (3)
Maybe more I forgot...
(1) The CIP kernel includes fixes for issues and security vulnerabilities from 4.14 kernel (see https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git)
(2) A somehwat lengthy explanation: This option is off by default on fresh installs. When upgrading, this should be enabled because we enforced this for everybody previously. However, this option is only required for certain carrier mbns that enable IMS. Personally, I know that the O2/Telefonica Germany mbn needs this, otherwise you get a crashing modem at every boot (unless you switch to 3g before rebooting and back to LTE after boot). I generally recommend playing with this option, and if you don't need it (e.g. modem doesn't crash on boot), just keep it off - like mentioned before, this is now the default behavior of OpenCS on fresh installs anyway.
(3) This is not finalized or merged upstream in LineageOS yet, but seems like a nice feature to have and test drive already. Some bugs may be possible.
2023-01-08 | 1.1 | 47.2.A.10.107
Updated to T QPR1 release (LineageOS upstream)
New default camera app (LineageOS upstream) - yes, we cannot change video fps currently (thanks Sony!)
Any other updates by LineageOS upstream
Kernel security updates (also thanks to Flamefire)
Dropped keyprovd service - it is useless on unlocked BL anyway
Show 4G instead of LTE icon - saves some space too
Enable IMS by default - this still only works if carrier is supported
Fix some selinux denials (also thanks to Flamefire)
Fixup ViLTE dependencies - this might in theory work again, but it's not enabled yet
2022-10-03 | 1.0 | 47.2.A.10.107
Initial release

Is it the same procedure as always?
first flash latest available Stock ROM(47.2.A.10.107) and boot into it once.
Then flash the twrp,
then flash the rom?

Gordon1979 said:
Is it the same procedure as always?
first flash latest available Stock ROM(47.2.A.10.107) and boot into it once.
Then flash the twrp,
then flash the rom?
Click to expand...
Click to collapse
Yes, That's it.
Flash gapps as well and maybe magisk if you want root.

Try it yesterday, it work fine.
But dirty flash from los19.1 lead boot loop
Nothing bug so far.
But light theme with white text bug seem fix from los 19.1.

THANK YOU for your Great Work

patrriot said:
THANK YOU for your Great Work . IT is perfect.
Click to expand...
Click to collapse

Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.

juanantofb said:
Hola a todos.
flash sucio, ........
Click to expand...
Click to collapse
It seems you don't know the first thing about xda

Can you put the network speed indicator ① in position ②?

juanantofb said:
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
Click to expand...
Click to collapse
You should not wipe those partitions. They are not wipeable in the GUI for a reason.
You should be bale to recovery this by going into flash mode and re-flashing stock.

juanantofb said:
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
Click to expand...
Click to collapse
Do a TWRP install again in Fastboot mode. Hold down the VOL + key and then connect the data cable to the PC. Led Blue ON .
Install the Universal ADB drivers.

Bbb

Hi all, not posible to enter in fastmode or flashmode, i waiting to discharge battery, if i can not enter in fastmode i think that this Sony is in the finale of your life.

juanantofb said:
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
Click to expand...
Click to collapse
I'm sorry that this happened to your device.
As other friends mentioned in other posts you can recover from this by flashing the stock firmware IF you can get it to flash mode.

Hi, do not worry, the battery in this phone is the end of your life, more rom has been flashed.
The problem is that i can not put phone in flash mode, only the last posibility is to wait tha the phone discharge battery and i can enter in flash mode.
Thank.
sohrab1985 said:
I'm sorry that this happened to your device.
As other friends mentioned in other posts you can recover from this by flashing the stock firmware IF you can get it to flash mode.
Click to expand...
Click to collapse

Found a small bug but not effect daily use.
When choose font or icon shapes.
It always default to last option.
The change effect normally through.

Installation complete, with minor difficulties.
My instructions:
1. flash last firmware (47.2.A.10.107) --> green LED
2. reboot once completely, Play Store not required to set up
3. reboot to fastboot --> blue LED
Link driver: https://developer.android.com/studio/run/win-usb
4. flash twrp: fastboot flash recovery twrp-3.6.2_12-0-20221002-maple
5. reboot to twrp
6. format data + restart in recovery
7. format dalvic , system , cache , data , internal storage + restart in recovery [ NOT Vendor Format !!!!! ]
8. flash the ROM,
8.1 Flash theGApps
8.2 Format Dalvic, Cache
9. reboooooooot
Have Fun

Hello,
This is the first rom I installed on my phone ever. I took me all day to figure it out how to unlock bootloader, install TWRP and then ROMS. I tried three roms: crDroid, Nusantara, and this one. I like this one best. It is amazing that one person can make such an OS and a whole sony corporation can not make an update
P.S. It works very well, but on my phone icons do not have bubbles when for example a message arrives. Maybe that is a bug or simply I do not know how to enable them (Notification dot on app icon is enabled).
At first I thought that there is a bug then I could not access files on a phone from a computer, but later I find out that it is a new security feature of newer android OS (I changed it to file transfer always on in Developers options)
Thank you

Develop Bugs

welcome