Develop Bugs

[Q] Bricked Galaxy Nexus

Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.

Have you tried booting into Odin mode

ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.

have you your warranty on it?
return it and get a new one

It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.

I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?

Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.

same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks

Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!

Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.

After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys

galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.

[Q] T-Mobile S2 T989 - hardbricked / can jtag fix it?

I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!

Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on

Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:

Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?

sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.

Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess

sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though

I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....

The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.

Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir

sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?

sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...

[Q] Official software upgrade - probably bricked my galaxy grand :'(

Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated

Are u able to enter recovery mode!

nick2408 said:
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Click to expand...
Click to collapse
Bro, hava read here....hopefully this will fix for u, FULL UNBRICKING TUT
http://forum.xda-developers.com/showthread.php?t=2725706

bodmar said:
Bro, hava read here....hopefully this will fix for u, FULL UNBRICKING TUT
http://forum.xda-developers.com/showthread.php?t=2725706
Click to expand...
Click to collapse
I was unable to go to recovery or download mode..
I took my phone to samsung service center and they told my motherboard has problems and it needs to be replaced.. huh

nick2408 said:
I was unable to go to recovery or download mode..
I took my phone to samsung service center and they told my motherboard has problems and it needs to be replaced.. huh
Click to expand...
Click to collapse
So its under warranty? Right? Or do u have to pay for the mess samsung created

doctor_droid said:
So its under warranty? Right? Or do u have to pay for the mess samsung created
Click to expand...
Click to collapse
I had to pay for it. It was out of warranty

nick2408 said:
I had to pay for it. It was out of warranty
Click to expand...
Click to collapse
Thats a really bad consumer behavior from an intl oem...

doctor_droid said:
Thats a really bad consumer behavior from an intl oem...
Click to expand...
Click to collapse
Why do you think so. I am quite sure my phone was hard bricked

nick2408 said:
Why do you think so. I am quite sure my phone was hard bricked
Click to expand...
Click to collapse
I meant behavior towards consumer... not ur fault mate...i knw how pathetic it can be to give away hard earned money when its nt our fault

Ridiculous move from Samsung IMO.

nick2408 said:
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Click to expand...
Click to collapse
Dear friend, Did you repair your phone my case is similar to yours.

agsao said:
Dear friend, Did you repair your phone my case is similar to yours.
Click to expand...
Click to collapse
Dear friend, just download your latest firmware at sammobile and flash it thru odin. Its the easiest and safest way to upgrade in my experience.

kaiserlourdes said:
Dear friend, just download your latest firmware at sammobile and flash it thru odin. Its the easiest and safest way to upgrade in my experience.
Click to expand...
Click to collapse
I could not open my phone and PC recognized it as unknown device.

agsao said:
I could not open my phone and PC recognized it as unknown device.
Click to expand...
Click to collapse
Search the forum on how to root and u can find there the Samsung USB drivers link. Download that

kaiserlourdes said:
Search the forum on how to root and u can find there the Samsung USB drivers link. Download that
Click to expand...
Click to collapse
Previously the PC was able to detect the phone (that mean the driver is installed successfully) but after this problem I can't turn on my phone ,and the screen is always blank.

agsao said:
Previously the PC was able to detect the phone (that mean the driver is installed successfully) but after this problem I can't turn on my phone ,and the screen is always blank.
Click to expand...
Click to collapse
can u explain how did you end up with blank screen when plug into PC?
did u go to download mode?
because mine was perfectly fine when plug into the PC.

kaiserlourdes said:
can u explain how did you end up with blank screen when plug into PC?
did u go to download mode?
because mine was perfectly fine when plug into the PC.
Click to expand...
Click to collapse
Dear friend,
My phone was stuck on logo screen.
I tried to full flash it using Odin I chooses all files except PDA files.
The phone accepted the flashing successfully
Phone restated and showing the android robot for updating
During this screen became black.
The result:
No response from phone it cann' be charged nor be turned on
I can't open the phone in any mode even download mode
When I plug my phone to the PC it's recognized as unknown device not as previous.
Thanks

agsao said:
Dear friend,
My phone was stuck on logo screen.
I tried to full flash it using Odin I chooses all files except PDA files.
The phone accepted the flashing successfully
Phone restated and showing the android robot for updating
During this screen became black.
The result:
No response from phone it cann' be charged nor be turned on
I can't open the phone in any mode even download mode
When I plug my phone to the PC it's recognized as unknown device not as previous.
Thanks
Click to expand...
Click to collapse
After successful flash the phone will reboot automatically and will stay on bootloop, while rebooting press and hols home+vol.up+power button. Then factory reset, wipe dalvik, wipe cache. Then reboot system..
Why not PDA? When i flashed stock rom i choose PDA and choose the file.
Auto reboot and f.reset time are the only checked boxes

kaiserlourdes said:
After successful flash the phone will reboot automatically and will stay on bootloop, while rebooting press and hols home+vol.up+power button. Then factory reset, wipe dalvik, wipe cache. Then reboot system..
Why not PDA? When i flashed stock rom i choose PDA and choose the file.
Auto reboot and f.reset time are the only checked boxes
Click to expand...
Click to collapse
Now I cannot flash it any more because the phone can't start in any mode neither download download mode nor recovery mode. ( may be hard bricked)

agsao said:
Now I cannot flash it any more because the phone can't start in any mode neither download download mode nor recovery mode. ( may be hard bricked)
Click to expand...
Click to collapse
one cannot hard bricked thru OTA update of official samsung. because i once update thru OTA and it updated successfully.
maybe it hard bricked when you flashed thru odin, maybe a wrong step.
i cant help you anymore brother, you can search this forum on how to unbricked device, u can try it. goodluck!

SGH-i747m only boots to recovery mode with 16gb sd card

Hello, I purchased a phone off kijiji fully knowing it was not functional - For the 40 dollars my curiosity got the best of me; and if I can fix it well I can get myself a new phone for cheap. I was informed that this phone: Samsung Galaxy sgh-i747m had the latest update (not custom rom). The phone suddenly would not boot past Samsung logo and by the time I bought it, would not boot up at all. So after doing extensive research I decided I would give the 16gb class 10 sd card boot a chance. While somewhat of a success, the only thing it boots me to is this.
BOOT RECOVERY MODE (IN GREEN)
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 159488 SECTORS
FLASH WRITE FAILURE (RED)
ODIN MODE (RED)
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER AP SWERV: 1
I should note that with the debrick-SGH-I747M-UEMK5 image that I used, the phone will boot to recovery mode without holding any buttons(While Plugged in). It will also boot to recovery if it is unplugged and I simply hold and release the power button when I feel the vibrate. I have also tried volume down + home + power. Same thing. If I take the sd card out I cannot get any sign of life / no recovery mode.
The computer does not see the device at all, even in device manager as a random name. There are no signs of life on the computer end. ODIN also does not detect it even when in boot recovery mode. Will not boot to download mode. A red light comes on if I pull the battery out and plug in the usb cable.

Do you have access to a USB jig to see if you can get into download mode?

audit13 said:
Do you have access to a USB jig to see if you can get into download mode?
Click to expand...
Click to collapse
No, I was contemplating making one or ordering one online but was unsure if that would make any difference. But I am willing to try anything even if there is a slight possibility it could work.

Where are you located? I recall seeing a thread on XDA about people that has a USB job for use by other XDA members.

audit13 said:
Where are you located? I recall seeing a thread on XDA about people that has a USB job for use by other XDA members.
Click to expand...
Click to collapse
I am in Thunder Bay, ON

I'm in Toronto which doesn't help you right now. Maybe order a USB jib and see what happens.
If you decide to sell the phone, let me know as I need to try and repair a phone that has a defective lcd and digitizer.

audit13 said:
I'm in Toronto which doesn't help you right now. Maybe order a USB jib and see what happens.
If you decide to sell the phone, let me know as I need to try and repair a phone that has a defective lcd and digitizer.
Click to expand...
Click to collapse
Will do. Going to build jig today and test it out

Another solution may be to have the firmware flashed via jtag.

You should be able to flash with Odin from there if I'm not mistaken. (Been a long time since I've been through this part myself). You may need to try different drivers, different cables, usb ports, etc.

audit13 said:
Another solution may be to have the firmware flashed via jtag.
Click to expand...
Click to collapse
Yea I didn't want to have to go that route if possible as my goal was to gain experience and knowledge from this little project. If I got the phone working then I would just replace my old Samsung infuse. I made the USB Jig using the 301K ohm's and it still does not work. I know the jig works because I tested it on my wife sgh-i747m and also on my infuse. Both of which boot into download mode immediately. My concern is there is something wrong with the main board because it really doesn't seem like it was rooted at all.
I am just going to see what I can get for it at this point, I paid 70 so would be looking to get at least 60

DocHoliday77 said:
You should be able to flash with Odin from there if I'm not mistaken. (Been a long time since I've been through this part myself). You may need to try different drivers, different cables, usb ports, etc.
Click to expand...
Click to collapse
I have tried 5 different cords, and two different computers on all usb ports. Nothing

You said it'll boot recovery, is it stock or a custom one? Also, are you familiar with ADB?
When you plug it into the computer, is it detected by odin? If so, what does it say in the message box when you try to flash?
Look in device manager too. What does it detect the device as?

gravitysdepth said:
Yea I didn't want to have to go that route if possible as my goal was to gain experience and knowledge from this little project. If I got the phone working then I would just replace my old Samsung infuse. I made the USB Jig using the 301K ohm's and it still does not work. I know the jig works because I tested it on my wife sgh-i747m and also on my infuse. Both of which boot into download mode immediately. My concern is there is something wrong with the main board because it really doesn't seem like it was rooted at all.
I am just going to see what I can get for it at this point, I paid 70 so would be looking to get at least 60
Click to expand...
Click to collapse
Hi,
Send me a message of you want to sell your s3.
Cheers.

I have an SGH-i747m and I'm having the same problem. Was a solution ever found?

Black Adam said:
I have an SGH-i747m and I'm having the same problem. Was a solution ever found?
Click to expand...
Click to collapse
You have the Canadian version of the s3? Will you phone boot into download mode without the sd card installed?

Sorry, I have the SGH-i747. The phone only boots with the SD card and just stays in download mode. Odin doesn't recognize it.

Black Adam said:
Sorry, I have the SGH-i747. The phone only boots with the SD card and just stays in download mode. Odin doesn't recognize it.
Click to expand...
Click to collapse
What was the last stock ATT ROM on the phone? Can the phone boot into download mode without the external SD card?
When you connect the phone to you computer in download mode, are you prompted to install drivers? If you are using Windows, any unrecognized devices in device manager?

And don't forget to try different cables and every USB port on the computer. Cables go bad much more easily than most people think, and many charging cables cannot be used for data transfer.
I've seen a number of times where people found that only one of the USB ports would allow it to connect.
You might also want to try several different driver versions. (I'd start with the oldest that was release along with the S3.) You can find several in the link in my signature.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

I am in big mess! Please help!!

I was doing some experiment with DriveDroid and now I am in big mess.
I think I messed up with drivedroid settings and I was not able to see my phone (oneplus 3 rooted LOS 15.1 ) on my computers.
I have tried different computers but all cant detect my phone.
I have tried drivedroid wizard, different usb systems, different usb settings and no luck.
I have tried uninstalling the drivedroid and still no luck.
The phone was going in charging mode only. Its was not going to MTP mode so I can see the phone internal storage in computer
I have tried to do factory reset also but no luck.
Now I mistakenly wiped data partition also and now the phone is with
No OS
No USB detection on phone while in TWRP
No OTG detection
No any ROM.zip file in phone memory.
When I am on TWRP and connect my phone in computer I am seeing same error message and cant see my phone interenal storage.
Now what to do? Any way to flash ROM ?
I am in big mess, and I dont want to spend money on new phone as of now
I hope someone will be my angle and suggest me something to recover and save me from this mess...
Crying out loud now...

Hi, i think you can use adb sideload with twrp

Uruloki64 said:
Hi, i think you can use adb sideload with twrp
Click to expand...
Click to collapse
Phone is not recognized in computer while in twrp mode so it is not able to connct to adb via USB.

Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.

aj141 said:
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
Click to expand...
Click to collapse
Ya.. going there tomorrow. Lets see what they say about it.

amit3880 said:
Ya.. going there tomorrow. Lets see what they say about it.
Click to expand...
Click to collapse
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700

Hayatzada said:
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .

amit3880 said:
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
Click to expand...
Click to collapse
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.

tnsmani said:
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
Click to expand...
Click to collapse
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,

Hayatzada said:
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Click to expand...
Click to collapse
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.

amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.

amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
reviewed post

tnsmani said:
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
Click to expand...
Click to collapse
tried to follow the unbrick guide on windows 10 but phone is not seen as QSBULK device in device manager.
I am going to try on windows 7 as few post said that windows 7 would be better for unbricking than windows 10.
finger crossed, right now flashing windows 7 live iso on USB.

so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...

amit3880 said:
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
Click to expand...
Click to collapse
So sorry about that .... Sad news

@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always

BADA 187 said:
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
Click to expand...
Click to collapse
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...

amit3880 said:
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
Click to expand...
Click to collapse
damn sorry to hear man.

BADA 187 said:
damn sorry to hear man.
Click to expand...
Click to collapse
Got 6T yesterday.... .. Yay!!
Couldnt find other phone competative in the price range.
Time to change the xda signature...

Although I bought 6T now and am kind of happy with that, but I am still missing my oneplus 3 and want to experiment on getting it revived.
By any chance someone can help me answering my doubts.. I would be greatful..
1. Is it ok to replace oneplus3's motherboard with oneplus 3t motherboard ? If by any chance i get any resell op3 or op3t in dirt cheap price I want to know if its ok to use 3T's motherboard.
2. Is there any way I can turn on the wifi from within TWRP and so I can connect to phone via adb over wifi/tcpip ??
Thank you all in advance.