Hi,
I recently bought the Galaxy Watch SMR 815Uzkv LTE in Greece. The watch works fine but i can not use the e sim card. Even though i managed to add the esim provider and enable it in the watch i can not make calls without the mobile.
I am in the latest firmware and from my understanding reading at this forum, i need to downgrade first and then change CSC for my country (EUR) and then add my network provider.
I have download the combination file '' COMBINATION-FT40_R815USQU1ARI2.tar '' and stock firmware '' R815USQU1CSL2_TIZEN 4 FILE_USA (OYN) (Tizen 4.0.0.7). Also NETODIN and SDBStarterKidv1 and i am going to follow this guide '' https://forum.xda-developers.com/t/sm-r825f-csc-change-tutorial.4061905 ''.
Since i am completely noob can someone confirm that i have the right files?
Thanks in advance and apologize if this question has been answered before.
Any advice? thanks again
Related
Hi All,
I've been following this prodigious forum for a long time, and, like many of us, i'm trying to change the default CSC of my galaxy watch 42 LTE.
I followed the procedure via SBD, formally it was successful, but like many of us, the watch did not show the list of countries.
So... this is the idea:
downgrade to first firmware via NetODIN (should be R815FXXU1CRK7), than use the SBD procedure in order to select my CSC (that should go on first firmware) then I proceed via OTA to update the latest available firmware.
This is my actual watch configuration:
AP: R815FXXU1FSL3
CP: R815FXXU1FSL3
CSC: R815FOXA1FSL3
Stock firmware I'm searching for: R815FXXU1CRK7
Should be a Europe free operatore device from DBT, desire to switch to ITV.
... and this is the issue:
I tried quite a lot but I still haven't been able to find the first firmware with which the watch was born, also on the XDA forum, but for the R815F version there doesn't seem to be my specific firmware ... could you help me?
In your opinion could it work this solution? Thanks for the contributions, so as to help the many of us who have the 42 LTE - R815F version.
Thank you,
Strategia
I dig up the subject, I have the same model and in 2 years I only received an update, I live in France but I received it with the csc oxa. I have the exact same firmware as you. And I never received an update.
Hi guys,
First post, so please let me off if I haven't followed protocol properly. I have been looking at all the other threads and posts and I have come to the conclusion that this is possible, but I need some guidance:
Bought the watch second hand. Samsung Pay isn't available. Samsung Tech help believe the watch isn't from the UK. I also believe this to be true, as when it is reset, the first language to appear is German, before it syncs with the phone and changes to English.
So I would like to change the region from Germany to England to get Samsung Pay enabled.
I have downloaded NetOdin3
I am capable of connecting to the watch in boot mode through wireless.
I have downloaded the combination firmware and stock firmware from https://forum.xda-developers.com/sm.../samsung-galaxy-watch-mactive-2-gwa2-t3968437 where adfree posted the links.
This is where I am stuck. I am unsure if these are the right files for the UK, because that thread was to change it from Germany to "ser"
From what I've read I need to change some text in the combination firmware, but how do I do this, in NetOdin3? or some other program.
Secondly what do I need to change it from and to? I understand its to get the region from Germany to UK, but what is the region code for the UK?
I appreciate I am a total beginner and have probably just asked some real basic questions, however after reading the thread about the guy who flashed his 820 with 830 firmware and bricked it, I'm a little more worried about getting something wrong.
Cheers in advance
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Mithos11 said:
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Click to expand...
Click to collapse
OK, thanks.
So do I need to edit the files that @adfree linked in SDP?
or are those files ready to go and do I need to edit some files off the watch somehow?
Cheers
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Mithos11 said:
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Click to expand...
Click to collapse
Thanks, the video on the last page made it much easier to understand the instructions, especially if you havent done this before. it was in russian, but its easy enough to follow.
all sorted now, samsung pay working. great stuff
Cheers
Pannatone
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
pannatone said:
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
Click to expand...
Click to collapse
You will normally receive the update via OTA!
I'm looking for latest R820XXU1BTA1 stock firmware.
Change region Samsung Active 2 with Tizen 5.5.0.1 for SM-R835 (LTE version)
Hello, I have recently purchesed and Samsung Active 2 but as soon as I have paired I got an update and I have updated without thinkning what will that mean , but any way I am looking for files to change the region for Samsung Active 2 with Tizen 5.5.0.1 and SM-R835 .
Please help !!!!
Where can I find Combination & Firmware file for R835 Active 2 LTE I am looking to change from German to UK ? thanks
Bro
I have watch active 2 SM-R820
And i change the region INU to BTU
After i change the region i still not get Samsung health Monitor app
And also try some region like XAR,Koo
But I still unable to get Samsung health Monitor app what I do
please help
Hello,
I am new to the unlocking stuff.
I just bought a used ATT Note10+ 5G in Malaysia, model SM-N976U
However the security patch was stuck in May 2020. It could not be updated over the internet or Smart Switch PC.
It says it is the latest s/w (the latest should be July 2020)
I checked Sammobile and discovered 2 firmware updates : USA(TMK) and USA (T-mobile)(TMB)
(tried to include sammobile link here but was disallowed due to new user status)
Which firmware is suitable for my phone?
Is there a way to unlock ATT and receive the normal monthly security update over the internet automatically?
(i saw Odin in youtube and have basic idea how to flash it)
Appreciate any advice. Thank you
SCitta said:
Hello,
I am new to the unlocking stuff.
I just bought a used ATT Note10+ 5G in Malaysia, model SM-N976U
However the security patch was stuck in May 2020. It could not be updated over the internet or Smart Switch PC.
It says it is the latest s/w (the latest should be July 2020)
I checked Sammobile and discovered 2 firmware updates : USA(TMK) and USA (T-mobile)(TMB)
(tried to include sammobile link here but was disallowed due to new user status)
Which firmware is suitable for my phone?
Is there a way to unlock ATT and receive the normal monthly security update over the internet automatically?
(i saw Odin in youtube and have basic idea how to flash it)
Appreciate any advice. Thank you
Click to expand...
Click to collapse
A thread already exists with the answers to your questions.
https://forum.xda-developers.com/galaxy-note-10+/how-to/att-note-10-5g-n976u-firmware-files-t4059721
No unbranded firmware version exists as of yet.. so you will have to flash a carrier specific firmware.
https://forum.xda-developers.com/showpost.php?p=81981925&postcount=3
Thank for for the link provided.
Based on the link information, i can download the 4 base files from sammobile (either TMK or TMB) and add USERDATA ATT N976USQS3BTF4 to flash it.
Is that correct?
I could find USERDATA ATT N976USQS3BTF4 in easy-firmware website with a purchase fee.
(editied: My phone Active CSC Code is XAA, CSC Country is USA)
SCitta said:
Hello,
I am new to the unlocking stuff.
I just bought a used ATT Note10+ 5G in Malaysia, model SM-N976U
However the security patch was stuck in May 2020. It could not be updated over the internet or Smart Switch PC.
It says it is the latest s/w (the latest should be July 2020)
I checked Sammobile and discovered 2 firmware updates : USA(TMK) and USA (T-mobile)(TMB)
(tried to include sammobile link here but was disallowed due to new user status)
Which firmware is suitable for my phone?
Is there a way to unlock ATT and receive the normal monthly security update over the internet automatically?
(i saw Odin in youtube and have basic idea how to flash it)
Appreciate any advice. Thank you
Click to expand...
Click to collapse
Hi SCitta,
Fellow Malaysian having the same problem as you. But my problem now is that I have Odin and the latest firmware (XAA) but Odin is showing failed to establish connection. How did you do it with yours?
Am using the AT&T version of the Note 10+.
KhairilH said:
Hi SCitta,
Fellow Malaysian having the same problem as you. But my problem now is that I have Odin and the latest firmware (XAA) but Odin is showing failed to establish connection. How did you do it with yours?
Am using the AT&T version of the Note 10+.
Click to expand...
Click to collapse
Never experienced the failed connection before.
Have you installed the SAMSUNG-drivers ? The Samsung Smart Switch PC installation might help to fix the drivers.
Hello everyone I am Malian and I live in Mali I recently bought a n976U locked by at & t since when I was putting a chip from an operator from here I was getting network unlock code So I looked for a way to unlock it for free if possible its like that I stumbled across your forum and read your posts and saw the code * # 272 * Imei # like we could try to change d 'operator with therefore when I put my chip it says "Invalid Sim card inserted" if I try to retype * # 272 * ... # it comes out nothing I'm lost please help me s 'please if possible of course Thank you
#123
Just want to share my experience in this. Bought an ATT N976U from the US and using in Malaysia. Phone came with XAA/XAA/ATT and never received OTA updates.
Downloaded Google phone app and changed CSC to TMB/TMB/ATT using *#*#27262826#*#*
Voila. Received the OTA updates one by one since May2020. Am now on N976USQU5EUC2.
Volte is also working on Celcom.
Did not have to flash firmware. Data not wiped. Everything seemed to be working normal apart from "Tips and Help" in settings crashes every time I click it. Also phone boots with T-Mobile logo now.
Hi I have the LTE Galaxy Watch Active 2 SM-R825F .
I have the R825FSSADBT s/w version.. I have issues with local esim compatibility here in Greece and I want to test a Greek CSC. Can anyone help with EU/COS version of this watch to flash? And if it is uploaded somewhere can anyone provide me with a link or the files?
Thanks in advance
https://forum.xda-developers.com/smartwatch/galaxy-watch/sm-r825f-csc-change-tutorial-t4061905
orbitech said:
Hi I have the LTE Galaxy Watch Active 2 SM-R825F .
I have the R825FSSADBT s/w version.. I have issues with local esim compatibility here in Greece and I want to test a Greek CSC. Can anyone help with EU/COS version of this watch to flash? And if it is uploaded somewhere can anyone provide me with a link or the files?
Thanks in advance
Click to expand...
Click to collapse
Y u want to try i can help you
do you know how to use net odin and r u ready to take risk.
Thanks for your time man yeah I've been doing this since HTC HD2 era I wasn't afraid of that.
I thought it was a specific f/w I had to d/l for flashing the specific CSC of my country in order to change it..Just like with ROMs. Then I watched the whole procedure and realised it had to do with messing with inf file after flashing a universal f/w to change the CSC and then push the commands through terminal before flashing back the OG f/w.
The proceduce was successful and now I can use mobile services of my country, which wasn't feasible before
Again thanks for your time
Hi guys!
I want to change the region to my active 2 LTE from US to Mexico so that I can use my Mexican carrier. I got it thinking it was globally unlocked but it looks like it's locked to the US.
I've seen some tutorials but they are for older versions (Tizen 4). This watch is on Tizen 5.5.0.1.
Can anyone please help me out with this?
Thank you very much
Looks like Mexico is OWO Region package... with CSC:
TCE
Step 1.
We need Combination Firmware...
Attached is slightly "modified"... only removed folder + 1 file...
Step 2.
We need OWO package of SM-R835F...
Best Regards
this works if the watch is already on 5.5.01 firmware? version FXXU1BT9
i need some help to not mess it up. since it only has one go through the wireless method.
thanks
xjust said:
this works if the watch is already on 5.5.01 firmware? version FXXU1BT9
i need some help to not mess it up. since it only has one go through the wireless method.
thanks
Click to expand...
Click to collapse
I was never able to find the OWO package for my watch. So I never went through the process
I got BTU region on my watch. 5.5.0.2. Anybody can help change it ? thank you
Hi, does anyone have the Stock Firmware for Samsung watch active 2 R835U?