Related
Hi everyone,
I just recently got a SM-R805N (Korea LTE ver) and want to change its region.
However the CSC variants in the stock only contains Korea telecom (as mentioned in the CSC thread by ecoco1)
I am trying to use the old fashion way: flash in the combination firmware, switch the CSC and then flash back to stock, in which, the CSC I am looking for is in SM-R805F version
However, I cannot find any free source for SM-R805F firmware online... all those available , also in this XDA forum, is only for bluetooth version.
Would anyone in XDA able to source the R805F firmware? (best to have both combination & stock?)
Thanks a million
worldcupxda said:
Hi everyone,
I just recently got a SM-R805N (Korea LTE ver) and want to change its region.
However the CSC variants in the stock only contains Korea telecom (as mentioned in the CSC thread by ecoco1)
I am trying to use the old fashion way: flash in the combination firmware, switch the CSC and then flash back to stock, in which, the CSC I am looking for is in SM-R805F version
However, I cannot find any free source for SM-R805F firmware online... all those available , also in this XDA forum, is only for bluetooth version.
Would anyone in XDA able to source the R805F firmware? (best to have both combination & stock?)
Thanks a million
Click to expand...
Click to collapse
I will grab it shortly for you
deadman96385 said:
I will grab it shortly for you
Click to expand...
Click to collapse
Million thanks!
worldcupxda said:
Million thanks!
Click to expand...
Click to collapse
Here is the R805FXXU1CSA3 firmware
https://www.androidfilehost.com/?fid=1395089523397890804
Here is the FT40_R805FXXU1ARJ1 Combination firmware
https://www.androidfilehost.com/?fid=1395089523397890811
They are the latest ones i could pull, hope it helps
Caution.
Since Gear S3 it is NO good idea to flash wrong Firmware nor wrong parts... to LTE variants...
You could end like this:
https://forum.xda-developers.com/smartwatch/gear-s3/sm-r765f-teardown-t3659431
https://forum.xda-developers.com/smartwatch/gear-s3/please-help-bricked-gear-s3-sm-r765s-t3665558
I have no Galaxy Watch... but this means not I have no idea how dangerous it is... if you doing """experiments"""...
Example:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Only as info.
Additional info...
Not tested what happens with CSC only... BUT be sure it is not less dangerous... because partition PIT is inside CSC and netOdin AUTOMATIC write this file to device...
Suggestion...
Study offline...
You can extract files with 7zip and compare...
rootfs.img needs some other Tools or Linux... or...
Best Regards
adfree said:
Caution.
Since Gear S3 it is NO good idea to flash wrong Firmware nor wrong parts... to LTE variants...
You could end like this:
https://forum.xda-developers.com/smartwatch/gear-s3/sm-r765f-teardown-t3659431
https://forum.xda-developers.com/smartwatch/gear-s3/please-help-bricked-gear-s3-sm-r765s-t3665558
I have no Galaxy Watch... but this means not I have no idea how dangerous it is... if you doing """experiments"""...
Example:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Only as info.
Additional info...
Not tested what happens with CSC only... BUT be sure it is not less dangerous... because partition PIT is inside CSC and netOdin AUTOMATIC write this file to device...
Suggestion...
Study offline...
You can extract files with 7zip and compare...
rootfs.img needs some other Tools or Linux... or...
Best Regards
Click to expand...
Click to collapse
Thanks adfree, but its too late... I have already bricked my brand new galaxy watch...
Now the watch wont go into any mode below. All it does is have a flash of horizontally line screen, consistently.
continue
factory command
recovery
download (wireless)
Tried the method "press 2 seconds, release 1 second" does not work, think it corrupted the partition.
Only mode still work is "download" which shows the screen correctly. What make it worse is I reset the watch before doing this and forget to turn off activation lock (but I have my own user name and password, think that does not make it worse then?)
Appreciate if any idea on how to tackle this... am already thinking about buying the usb connector for odin flash...(hopefully something will make it work again...)
Suggestion, if you want try it self at home....
Look into this post:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Look into Video...
You can also click around this Thread... to see diffferent "solutions"...
Security prevent netOdin use... IMHO no way without USB to flash again.
If you have POGO Connector... Odin...
Then try FIRST to flash SM-R805N...
I see at this time it is not leaked...
So you need luck to flash SM-R805N Firmware...
Hopefully Warranty Void will still:
0 0x0000
Seems 3 SM-R805N Stock Firmware leaked:
Code:
R805NKOU1ARK8
R805NKOU1ARJ6
R805NKOU1ARHJ
You can PM me... if you need Help with POGO...
Best Regards
Sent you a pm thanks very much, i have not yet able to watch the video as im at work, but i think i need the items below:
R805N stock firmware
POGO Cable for usb connection
anything else would i need?
worldcupxda said:
Sent you a pm thanks very much, i have not yet able to watch the video as im at work, but i think i need the items below:
R805N stock firmware
POGO Cable for usb connection
anything else would i need?
Click to expand...
Click to collapse
Sorry to hear it bricked, here is at least R805N normal firmware, there isn't any combo firmware that I can find atm
https://www.androidfilehost.com/?fid=1395089523397891319
Thank you @deadman96385 for the firmware
Hi adfree, here is the photo of the "Download" screen
Now i need to get my hand on the cable to try it out...
Thanx for Photo. :good:
Good:
A
SM-R805N to see...
So sboot.bin is not overwritten...
B
Warranty void still 0 0x0000
So Knox not dripped... BUT you have to wait for final result after Repair Flash...
Not so good = IMHO bad...
Reactivation Lock is ON...
This means MORE f&%ing Security...
As "we" have only Stock Firmware...
If no luck then also Warranty Void Value will change... maybe.
P.S...
partition.pit aka PIT is 1:1 same between SM-R805F and SM-R805N... except the RSA 2048 Signature crap at the end of file.
Best Regards
adfree said:
Thanx for Photo. :good:
Good:
A
SM-R805N to see...
So sboot.bin is not overwritten...
B
Warranty void still 0 0x0000
So Knox not dripped... BUT you have to wait for final result after Repair Flash...
Not so good = IMHO bad...
Reactivation Lock is ON...
This means MORE f&%ing Security...
As "we" have only Stock Firmware...
If no luck then also Warranty Void Value will change... maybe.
P.S...
partition.pit aka PIT is 1:1 same between SM-R805F and SM-R805N... except the RSA 2048 Signature crap at the end of file.
Best Regards
Click to expand...
Click to collapse
thanks... I should be able to get the POGO wire mid next week, will update you the result....!
My Galaxy is back alive! Thanks everyone in this thread. Tested the following:
Install R805N firmware: Download mode: Works
Install R805F firmware:
Download mode: PIT fail instantly, without install
Download (Wireless): Able to complete the install -> Fail warning in red -> Bricked
Tried for combination firmware, or CSC only, same result
Guess I will never have chance to change my CSC then...? (Unless there is a combination R805N available which has all CSC countries inside?)
hi did you manage to change the region? I have the same watch.
Hello everybody,
i need R800XXU1BSA4
SM-R800 galaxy watch 46mm bluetooth version firmware
can anyone help me ?
thank you
Malor1k said:
hi did you manage to change the region? I have the same watch.
Click to expand...
Click to collapse
no i am not able to change, as mentioned above, the original firmware does not have other CSC included, flashing any other firmware will brick the watch
i think it will only be possible if R805N has a combination firmware release
Looking for firmare
Hello,
I have a Galaxy watch,the LTE version - I got it as a present from a friend abroad and in order to connect to domestic mobile provider I need to use
the latest firmware. That is R805FXXU1FSL3
I 've searched as much as possible online to track it but without success.
Can someone please help?
Thank you very much
Hey ! same issue here. Did we find a solution?
@worldcupxda whats the update?
Hi I have Galaxy watch 46mm LTE INDIA version, after by changing CSC to Australia by *#272*IMEI# to get Samsung Pay. After that I'm not able to make calls through Stand Alone mode.
I have tried to the change the CSC through COMBINATION, But Push data is getting denied.
Kindly provide me a link for INDIA stock Firmware and help me out.
Million Thanks.
Suprith Jadhav said:
Hi I have Galaxy watch 46mm LTE INDIA version, after by changing CSC to Australia by *#272*IMEI# to get Samsung Pay. After that I'm not able to make calls through Stand Alone mode.
I have tried to the change the CSC through COMBINATION, But Push data is getting denied.
Kindly provide me a link for INDIA stock Firmware and help me out.
Million Thanks.
Click to expand...
Click to collapse
Did you find any solution
Hi to all.
Last week I got A50. During first boot of system I didnt inserted SIM card ant it seems that it triggered installing firmware for diferent region. Im located in Serbia but firmware is for Turkey and I have many apps on turkish language without posibility to change language in those apps.
Is any method to change CSC?
Thanks in advance!
Ok, no answer yet. Maybe to precise my question,
Could someone tell me which files I need to use to change my current CSC Turkey to lets say Israel CSC ILO.
I suppose it could be done with Odin but which versions of firmware...
Thanks
Alexxxx1 said:
Ok, no answer yet. Maybe to precise my question,
Could someone tell me which files I need to use to change my current CSC Turkey to lets say Israel CSC ILO.
I suppose it could be done with Odin but which versions of firmware...
Thanks
Click to expand...
Click to collapse
Did you learn how to do?
Sent from my [device_name] using XDA-Developers Legacy app
Nope, Im totaly disapointed in comunity in section for model A50. There is no answers, there is no tutorials, there is no custom roms except two of them, and I will probably sell this phone.
Regards
Sent from my SM-A505F using Tapatalk
you should download https://www.sammobile.com/samsung/galaxy-a50/firmware/SM-A505F/TUR/download/A505FDDU4BTC9/330469/ this version, and use odin to flash it in your phone. Keep the sim in the phone for the process, because with that it will verify you are in turkey.
Although in odin the process may work if you use the HOME_CSC file to keep the data of your phone intact, i would suggest using the other file, because with that you'll have a fresher device
Hello,
I try to change my CSC to be able to activate the eSIM and Samnsung Pay,but i'm unable to do that in sdb (it says launch_app csc-manager.csc-pre-configuration that is successful but on my watch it doesn't show the CSC menu).
Is downgrading my only solution and if so , where can i find the firmware because I can't seem to find anything on SamMobile?
Thank you
welcome here I have same problem :crying:
https://forum.xda-developers.com/showpost.php?p=79644543&postcount=1
Here is some Firmware for Downgrade.
@MISU123456
Check this post:
https://forum.xda-developers.com/showpost.php?p=81320451&postcount=7
@yager01
You could try OXA... use ESD8:
Code:
R805FXXU1[B][COLOR="Green"]ESD8[/COLOR][/B]_Tizen_4File_Multi CSC ([B][COLOR="Green"]OXA[/COLOR][/B])
This should be valid for further FOTA update for TMH CSC...
OWN RISK!
netOdin Tool + Infos + Videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards
adfree said:
https://forum.xda-developers.com/showpost.php?p=79644543&postcount=1
Here is some Firmware for Downgrade.
@MISU123456
Check this post:
https://forum.xda-developers.com/showpost.php?p=81320451&postcount=7
@yager01
You could try OXA... use ESD8:
Code:
R805FXXU1[B][COLOR="Green"]ESD8[/COLOR][/B]_Tizen_4File_Multi CSC ([B][COLOR="Green"]OXA[/COLOR][/B])
This should be valid for further FOTA update for TMH CSC...
OWN RISK!
netOdin Tool + Infos + Videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards
Click to expand...
Click to collapse
@adfree
I hope I understand everything good. Now I have a newest CSC with OXA (Open - Open Country code) - *#1234#: My CSC R805FOXA1FSK2
You offer me a downgrade with this : R805FXXU1ESD8
What would be the worst could happen?
What would be the worst could happen?
Click to expand...
Click to collapse
If out of luck...
You can brick your device... something like this is deadly enough:
https://forum.xda-developers.com/smartwatch/gear-s3/wireless-mode-enter-gear-s3-sm-r760-t3710855
And/or Boot loop/cycle...
Repair attempt then require USB cable... Example Video:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
This is why I wrote OWN RISK...
Best Regards
Edit 1.
@MISU123456
to be able to activate the eSIM
Click to expand...
Click to collapse
Be carefully with wrong Firmware...
IMHO you can not change region...OXX OXA... or whatever is on your device...
adfree said:
If out of luck...
You can brick your device... something like this is deadly enough:
https://forum.xda-developers.com/smartwatch/gear-s3/wireless-mode-enter-gear-s3-sm-r760-t3710855
And/or Boot loop/cycle...
Repair attempt then require USB cable... Example Video:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
This is why I wrote OWN RISK...
Best Regards
Click to expand...
Click to collapse
@adfree
Few days ago I updated with Odin My Note9. I downloaded from the sammobile the actual last firm and made it without problem. I don't understand why bigger the risk with the samsung watch.
I don't understand why bigger the risk with the samsung watch.
Click to expand...
Click to collapse
Phones have USB cable for Emergency Flashing.
Samsung Watches is bigger problem if you kill the """WiFi Security chain"""...
You have not USB cable for easy second attempt.
And the LTE Watches makes more trouble... if you doing something wrong or simple out of luck.
You asked about worst case...
netOdin is not 100 % riskfree.
IMHO:
No risk no fun. :angel:
Best Regards
Downgrade
Hi, I have SM-R805F bought in Czech rep. Can I use these instructions for downgrade my firmware to change my region (I want Samsung Pay)? I have saved my eSIM in my watches now - after flashning it will stay there or will be deleted? Thanks a lot
@ohajo3
Yes you can. Do not reset networks after flash during setup. Esim will stay.
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone or @adfree can point me to right direction to get the right required binaries ?
My device details
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
LTE version.
Can anyone help with the right binary I should use to downgrade?
These are my device details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
LTE version.
Not able to find combination firmware for this version. Not very sure which one I should use.
Thanks in advance.
@madono
You wish to have India INU?
http://fota-cloud-dn.ospserver.net/firmware/INU/SM-R805F/version.test.xml
IMHO seems INU require OXX package...
Here are 2 OXX packages:
https://forum.xda-developers.com/showpost.php?p=79644543&postcount=1
According to DBT list... they are before Tizen 4.0.0.7
So please try these 2 firmwares... with the old method to change CSC...
So IMHO no Combination Firmware required...
Only downgrade...
Best Regards
Edit 1.
Sorry, my fault...
Links expired.
Edit 2.
Oh, totally forgotten...
Latest FTC1 for OXX region is here:
https://forum.xda-developers.com/showpost.php?p=82893207&postcount=55
INU inside this OXX region.
@adfree Thanks for the links! I m downloading it right now. Speed is slow, not sure if I will be able to download it in one go. Is there any expiry for this download link? If I m not able to download today, will try tomorrow again.
Another question for downgrade, do I have to choose all four files , namely, BL, AP, CP, CSC to downgrade?
I have not done a galaxy watch downgrade before so wanted to be sure not to mess it.
I actually wanted to have Samsung Pay and LTE enabled. It was working fine using Australia CSC code but my Phone operator recently changed calling only on VoLTE. So i was not able to receive calls or call anyone. Only internet was working using AU CSC.
Now it seems I have to choose between calling and Samsung Pay. SP is not officially launched on Galaxy Watch in India. Only on smartphone it is allowed. Not sure why.
Thank you once again!
Regards,
madono
Hi @adfree,
I downloaded the firmware from the link. Today was bit hard day at work so not trying to update watch.
Will try it out with fresh mind tomorrow. Just need couple of things cleared before I try it.
1. In firmware download steps, it is mentioned to only use BL, AP, CSC file?
Downloaded rar has 4 files. Is this fine?
And final one this is my current watch status
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Watch is LTE model.
I m good to go ahead with said firmware?
@adfree please review, don't want to mess this one. I know there is always risk but want to use correct firmware.
Thanks for the help!
@madono
OWN RISK!
Downgrade... OXX
https://www.file-upload.net/download-14218710/R805FXXU1ESE3_OXX.7z.html
Round 1 with netOdin...
ALL 4 files!
BL_R805FXXU1ESE3_usr.tar.md5
AP_R805FXXU1ESE3_usr.tar.md5
CP_R805FXXU1ESE3_CL1125521_QB12612098_SIGNED.tar.md5
CSC_OXX_R805FOXX1ESE3_usr.tar.md5
Look into this CSC change Thread...
Concentrate only on SDB Command stuff...
https://forum.xda-developers.com/showpost.php?p=76077212&postcount=1
If nothing exploded...
Flash all 4 files from FSL4...
Best Regards
adfree said:
@madono
OWN RISK!
Downgrade... OXX
https://www.file-upload.net/download-14218710/R805FXXU1ESE3_OXX.7z.html
Round 1 with netOdin...
ALL 4 files!
BL_R805FXXU1ESE3_usr.tar.md5
AP_R805FXXU1ESE3_usr.tar.md5
CP_R805FXXU1ESE3_CL1125521_QB12612098_SIGNED.tar.md5
CSC_OXX_R805FOXX1ESE3_usr.tar.md5
Look into this CSC change Thread...
Concentrate only on SDB Command stuff...
https://forum.xda-developers.com/showpost.php?p=76077212&postcount=1
If nothing exploded...
Flash all 4 files from FSL4...
Best Regards
Click to expand...
Click to collapse
Hi @adfree I have downloaded files from this link mentioned in your previous post. Is this not valid one?
https://forum.xda-developers.com/showpost.php?p=82893207&postcount=55
@madono
Please concentrate... focus...
IMHO I thought you wish to change CSC...
So IMHO 2 FirmwareS needed...
A
For downgrade to use old SDB Command for CSC change...
B
I gave you latest FSL4 for OXX region...
Now is up to you to manage.
IMHO I gave you all infos + files + links...
Please mercy... I have not unlimited time and energy...
Best Regards
adfree said:
@madono
Please concentrate... focus...
IMHO I thought you wish to change CSC...
So IMHO 2 FirmwareS needed...
A
For downgrade to use old SDB Command for CSC change...
B
I gave you latest FSL4 for OXX region...
Now is up to you to manage.
IMHO I gave you all infos + files + links...
Please mercy... I have not unlimited time and energy...
Best Regards
Click to expand...
Click to collapse
Hi @adfree ,
Sorry for bothering you. I miss understood your previous post.
Thank you for all the help!!
Regards
Hi ,
Finally was able to downgrade to 4.0.0.4 and watch did not explode
This link has 4.0.0.7
https://forum.xda-developers.com/sho...7&postcount=55
After download I was still on 4.0.0.7 and looks like my CSC was still pointing to AU
I used this link to downgrade : https://www.file-upload.net/download...E3_OXX.7z.html
Then SDB command to change CSC from AU to India
Thanks to @adfree
One thing I observed that my eSIM was not reset. I was expecting it will be removed when I downgrade. Looks like it is left alone in this process.
Not sure if there is any way to enable Samsung Pay without changing CSC. Missing SP very much in current time.
Regards,
adfree said:
@madono
Please concentrate... focus...
IMHO I thought you wish to change CSC...
So IMHO 2 FirmwareS needed...
A
For downgrade to use old SDB Command for CSC change...
B
I gave you latest FSL4 for OXX region...
Now is up to you to manage.
IMHO I gave you all infos + files + links...
Please mercy... I have not unlimited time and energy...
Best Regards
Click to expand...
Click to collapse
@adfree
Did I correct understand:
To change CSC by old method (with SDB) it is needed:
1. Flash with Odin all 4 files (early Firmware)
2. Change CSC with SDB
3. Install Samsung Pay
4. Flash with Odin all 4 files (latest firmware) back to FSL4
and Samsung Pay will stay?
Hi guys,
First post, so please let me off if I haven't followed protocol properly. I have been looking at all the other threads and posts and I have come to the conclusion that this is possible, but I need some guidance:
Bought the watch second hand. Samsung Pay isn't available. Samsung Tech help believe the watch isn't from the UK. I also believe this to be true, as when it is reset, the first language to appear is German, before it syncs with the phone and changes to English.
So I would like to change the region from Germany to England to get Samsung Pay enabled.
I have downloaded NetOdin3
I am capable of connecting to the watch in boot mode through wireless.
I have downloaded the combination firmware and stock firmware from https://forum.xda-developers.com/sm.../samsung-galaxy-watch-mactive-2-gwa2-t3968437 where adfree posted the links.
This is where I am stuck. I am unsure if these are the right files for the UK, because that thread was to change it from Germany to "ser"
From what I've read I need to change some text in the combination firmware, but how do I do this, in NetOdin3? or some other program.
Secondly what do I need to change it from and to? I understand its to get the region from Germany to UK, but what is the region code for the UK?
I appreciate I am a total beginner and have probably just asked some real basic questions, however after reading the thread about the guy who flashed his 820 with 830 firmware and bricked it, I'm a little more worried about getting something wrong.
Cheers in advance
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Mithos11 said:
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Click to expand...
Click to collapse
OK, thanks.
So do I need to edit the files that @adfree linked in SDP?
or are those files ready to go and do I need to edit some files off the watch somehow?
Cheers
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Mithos11 said:
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Click to expand...
Click to collapse
Thanks, the video on the last page made it much easier to understand the instructions, especially if you havent done this before. it was in russian, but its easy enough to follow.
all sorted now, samsung pay working. great stuff
Cheers
Pannatone
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
pannatone said:
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
Click to expand...
Click to collapse
You will normally receive the update via OTA!
I'm looking for latest R820XXU1BTA1 stock firmware.
Change region Samsung Active 2 with Tizen 5.5.0.1 for SM-R835 (LTE version)
Hello, I have recently purchesed and Samsung Active 2 but as soon as I have paired I got an update and I have updated without thinkning what will that mean , but any way I am looking for files to change the region for Samsung Active 2 with Tizen 5.5.0.1 and SM-R835 .
Please help !!!!
Where can I find Combination & Firmware file for R835 Active 2 LTE I am looking to change from German to UK ? thanks
Bro
I have watch active 2 SM-R820
And i change the region INU to BTU
After i change the region i still not get Samsung health Monitor app
And also try some region like XAR,Koo
But I still unable to get Samsung health Monitor app what I do
please help
Hi guys!
I want to change the region to my active 2 LTE from US to Mexico so that I can use my Mexican carrier. I got it thinking it was globally unlocked but it looks like it's locked to the US.
I've seen some tutorials but they are for older versions (Tizen 4). This watch is on Tizen 5.5.0.1.
Can anyone please help me out with this?
Thank you very much
Looks like Mexico is OWO Region package... with CSC:
TCE
Step 1.
We need Combination Firmware...
Attached is slightly "modified"... only removed folder + 1 file...
Step 2.
We need OWO package of SM-R835F...
Best Regards
this works if the watch is already on 5.5.01 firmware? version FXXU1BT9
i need some help to not mess it up. since it only has one go through the wireless method.
thanks
xjust said:
this works if the watch is already on 5.5.01 firmware? version FXXU1BT9
i need some help to not mess it up. since it only has one go through the wireless method.
thanks
Click to expand...
Click to collapse
I was never able to find the OWO package for my watch. So I never went through the process
I got BTU region on my watch. 5.5.0.2. Anybody can help change it ? thank you
Hi, does anyone have the Stock Firmware for Samsung watch active 2 R835U?