Related
The aluminum bumper from capdae looks nice. I like the black/gold especially, or maybe the all silver color. Has anyone tried it yet? I want to know how rigid it is, if it really is aluminum, and whether it is smooth and cool to the touch. Also wanted to know if the break where the two pieces snap together can be easily felt, and if the finish is good and smooth with no sharp or rough places. I've bought cheap snap-on hard cases and the break where they snap on was always rough and unpleasant.
Here's a video:
http://www.youtube.com/watch?v=kpNyO1AaOUg
Here's the same thing for the S2. It's easier to see the bumper.
http://www.youtube.com/watch?v=LRHvtTb4j-s
katamari201 said:
The aluminum bumper from capdae looks nice. I like the black/gold especially, or maybe the all silver color. Has anyone tried it yet? I want to know how rigid it is, if it really is aluminum, and whether it is smooth and cool to the touch. Also wanted to know if the break where the two pieces snap together can be easily felt, and if the finish is good and smooth with no sharp or rough places. I've bought cheap snap-on hard cases and the break where they snap on was always rough and unpleasant.
Here's a video:
http://www.youtube.com/watch?v=kpNyO1AaOUg
Here's the same thing for the S2. It's easier to see the bumper.
http://www.youtube.com/watch?v=LRHvtTb4j-s
Click to expand...
Click to collapse
I have one, it's pretty good! The frame itself is definitely aluminium (checked for solidity and sonorous...ity and confirm it's metal) Takes a little effort to snap it together, but once in place it's extremely solid with no flex whatsoever. The frame is also slightly raised at the back in each corner so the camera lens does not touch the "surface" when you put it down (something that was crucial to me and not clear from the pictures)
The only slight downside is that the metal is quite smooth so it's a little slippery compared to my previous leather case (unsurprising!) and the brushed effect is only average, would have preferred a "matte" effect but that's only a minor gripe.
As for sharp edges, the only edges I really notice are around the stylus gap but even these aren't particularly sharp, just 90° cuts.
This frame is definitely not going anywhere without the opening tool, that's for sure!
Why do people put these bumpers on their phones...I mean on a phone like the iPhone or S2 where it's small, I'd get it...but on a large phone like the Note....I just find it so fugly.
PoisonWolf said:
Why do people put these bumpers on their phones...I mean on a phone like the iPhone or S2 where it's small, I'd get it...but on a large phone like the Note....I just find it so fugly.
Click to expand...
Click to collapse
Considering it's up to them since they bought it..
Tell you what, you can buy me another Note and put whatever you want on it.
What kind of aluminum is it and how does it feel? Say in comparison to the iPad (abit rough but nice), iPad2/3 (a bit too smooth and not as rigid as first ipad), iPhone (stainless steel-ish), samsung phones like the s8500 wave and omnia 7 (brushed and too rough, not very rigid). I guess any household item or gadget to describe it would be nice. Would like to also know how much of a surface area increase does it provide over just the bare chrome trim, and whether it is easier and more comfortable to hold with it on. Holding it comfortably and securely is my main focus. Oh, also wanted to know whether there is any soft material in the inside, especially where it touches the front glass, to protect the phone from getting scratched by the frame.
katamari201 said:
What kind of aluminum is it and how does it feel? Say in comparison to the iPad (abit rough but nice), iPad2/3 (a bit too smooth and not as rigid as first ipad), iPhone (stainless steel-ish), samsung phones like the s8500 wave and omnia 7 (brushed and too rough, not very rigid). I guess any household item or gadget to describe it would be nice. Would like to also know how much of a surface area increase does it provide over just the bare chrome trim, and whether it is easier and more comfortable to hold with it on. Holding it comfortably and securely is my main focus. Oh, also wanted to know whether there is any soft material in the inside, especially where it touches the front glass, to protect the phone from getting scratched by the frame.
Click to expand...
Click to collapse
The only soft inside is on the back section in the four corners. The phone does not move around at all so there is no risk of scratching, which is also coupled with the fact that aluminium physically cannot scratch Gorilla Glass - in fact your screen will scratch the aluminium!
As for holding it, there is a certain degree of personal opinion involved. Some people would find the ridge on the back surface (the cutout of the frame where it meets the battery cover) uncomfortable, however I really like it because it provided a gripping point for your fingers when holding one handed a bit like the finger ridges on some digital cameras.
Size-wise, it only adds ~2mm on each side so not much of a difference.
The finish is brushed aluminium, so cannot be compared to any iDevice because they are all matte/sandblasted. The finish reminds me of the brushed aluminium of the Hyper Osiris PC case (mainly because I had one of these myself for a while) If you do a Google Images search and filter for large images you'll get a good view of the finish style. One thing for sure, it definitely does not flex when pushed anywhere!
capdase usually has good, reliable and cheaper cases for those on a budget i think in some you get a free screen gaurd too which is like killing two birds with one stone
nikethdesouza said:
capdase usually has good, reliable and cheaper cases for those on a budget i think in some you get a free screen gaurd too which is like killing two birds with one stone
Click to expand...
Click to collapse
Forgot to mention that bit, my Duo Frame came with a screen protector as well. Not applied it yet though!
When you have one of the smartest smartphones at your disposal, you obviously want to make sure that you have the smartest protection out there. The rugged OtterBox Defender Case safeguards the thin and light body of your Samsung GALAXY Note from damages under virtually , any circumstances for the ultimate protection solution!
DESIGN AND FEEL:
Full access to all the Samsung Galaxy Note’s buttons and features through the case, including camera, flash and stylus opening.
Silicone plugs provide full coverage of volume controls, headphone jack, micro USB opening, power button and charging port.
Two-layers of protection include a sturdy polycarbonate inner layer and rugged silicone outer layer.
Inner polycarbonate layer includes a built-in screen protector and inner foam liner.
Outer silicone layer features a grooved texture on the side for enhanced grip.
BUILD QUALITY AND LAYERS OF PROTECTION
Screen Protection: Built-in screen protector prevents scratches, scuffs and smudges while retaining the sensitivity of the Note’s touchscreen.
Inner Layer: Two-piece polycarbonate snaps together around the Galaxy Note creating a solid shelter. The
inside of the polycarbonate includes a foam inner liner to cushion the Note against oopsies such as bumps,shocks and drops.
Outer Layer: Rugged silicone wraps around the inner polycarbonate layer. The sides of the silicone outer layer feature a grooved texture for enhanced grip.
Holster: Rotating belt clip securely fastens to almost anything and also doubles as a media viewing stand when locked into place. You can face the touchscreen out for use or face it in for maximum protection.
ACCESSIBILITY AND STYLE :
The case is classic black in color, which some people may find boring, where as I just love the simple bold look, it looks very sturdy and strong. It does add some bulk to the phone but for me it wasn’t a deal breaker.The Earpiece,Sensors and front facing Camera are protected with hard plastic edges which are very classy and look stunning.The Volume keys are also fully protected ,as is the Power key on the right side..
At the top , the noise cancelling mic is open and the Headphone jack covered by a small pull-able cover, what is great about this is there is a very hard plastic edge around the Jack port.As with the Top the Bottom is also well protected namely the Micro USB Charging port. The S-Pen is fully open giving great ease of use when pulling out the S-Pen. There is separate openings for Microphone and rear speaker.
One word to describe this case would be: DEFENDER!
"Conclusion"
My overall experience with Otterbox Defender series has been great. This is the Best Protective Case for Galaxy Note as no other case provides this Premium look, Awesome feel, and the Amazing protection that Otterbox provides.
Price :
It is priced at $59.99 on www.otterbox.com
For Images and More info , Visit : www.theandroidcop.com/review-otterbox-defender-case-for-samsung-galaxy-note/
I was fortunate enough to find this case lying around the workplace.
The boss-man said I could have it!
Saved myself $60!
Ouch... feels like having 2 notes inside my pocket, lack of close-up pictures in details
Too bulky for a already large phone... and too expensive.. there is better protection for less out there... IMHO
Sent from my GT-N7000 using XDA Premium HD app
Yes its big, but I'd worked out what size it would be before buying the phone or case. Get a ruler, make a cardboard mock up.
I actually had the case before the phone and it went straight into it on arrival. Working outdoors a lot and having had old candy bar type phones often take a tumble to the ground, I wanted my new phone properly protected.
Having used the phone and case for 6 months, its only tumbled out of pocket once, when not actually clipped in. I typically use the hard beltclip cover, in top pocket of work shirt, with the clip opened over the shirt button. This prevents it riding deeper in the pocket, but the button provides something for the clip to grab, so if during contortions outside, the phone flips out of pocket, it remains clipped to the pocket. Additionally when using the belt clip cover, the silicon shell faces the body, so it seems very unlikely perspiration would find its way into the phone, which seems to be an issue with some phones and their usb/headphone ports (covered with defender)
It seems it would also be quite secure if deeper in the pocket without the belt clip cover, the silicon case grabs the pocket well, although in this position the button is exposed to body moisture (if theres no stock seal around that)
What I did NOT like about the case was the built in screen protector, like all matte finish protectors I have seen, it blurs the pixels giving a fuzzy effect to the display.
I carefully removed the built in protector, pushing around with thumb in warm weather worked, and replaced it with a Spigen glas.t, tempered glass protector. The glas.t is about 0.5mm thick, there is room for it within the defender case. I suspect the tempered glass/silicon adhesive would do a good job of spreading the energy from a sharp impact, performing much like a laminated car windscreen which tend to keep most impact chips in the outer glass layer.
I have the full protection of the defender case, and full visual clarity of the screen. Win/Win
I also do not have to worry about the possibility of dust, grit etc working its way into the case and being held against the screen. This may not happen, I didn't leave it original long enough, but certainly seemed it would be likely in the environments I work in.
Hope this helps someone
Its big, bulky, but is worth it! Own one myself. Its worth the tradeoff for protection of an expensive toy
Well i have this case for over 2 months and i can say that its trully worth the money! The extra protection is awesome as well is the design and grip! However it has 2 downsides IMHO.
1st you have to open it and clean it once per 15 days and believe me at first it's a pain in the ass to open it and you re gonna break some nails .
2nd some areas far on the top on the screen need to be pressed harder i.e. it takes some time to get used to taking down the Notification Center the first days.
Hope this helps!
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.
Hello,
So I got a case from ArmadilloTek.
I got the Vanguard Series Case in Orange for my S10+
Can find link here:
https://www.amazon.com/gp/product/B07MLZW7XQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I took advantage from an earlier post about getting one for free in exchange for feedback.
Packaging:
Looks just like an otterbox package. Not that matters to me.
Packaging did seem a little "loose" a lot of movement on the inside.
Other than that, thats about it for the package.
The case was not put together it was separated by a piece of hard styrofoam.
I like cases that you dont have to take apart first.
Also came with a note that looks like it was hand written and then copied to go out to everyone. Nice little idea.
Pros:
The color matches almost 100% the color on the details page which is nice.
Little groove arrows on the side do make it for easier handling. I do like that design, some may not.
Back of case Design:
The camera cut out is nice, and does not interfere with the camera abilities and does not affect the camera flash either.
The bottom flaps for Headphone and Charging port are easy to open. and they feel very well made that wont break off with just few uses.
Buttons: All the buttons work with normal pressing. No hard press, or squeezing of the phone to make them work.
Front:
The case sits up on the phone, creating space from the screen and any surface that it will be against. So i like this design.
Even with the higher bezels for the case it does not interfere with the top notification bar being pulled down, or activating the edge screen.
The case looks to be very durable, but I do not plan on testing that out on purpose. But, if i do drop it I will report back with my review after.
Case is real easy to clean. I got it pretty dirty and use an alcohol wipe to clean it and it wiped right off.
Works just like normal for wireless charging and wireless power sharing.
Cons:
Does add extra weight to the device
Kickstand feels a little flimsy, thinking prolonged use could break it, also, it could have been a rotating one with a ring style since alot of companies are adding those now. That would make for easier use. (may only be a con for me)
Corners are kind of Squared, not rounded, so I feel it gets caught a little in the pocket. Works well in jeans, but gyms clothes and dress pants it gets caught up in them.
Overall I would rate this easy at 4.5* out of 5*
If you have one, or had one, or are looking to get one drop a comment here and lets chat about it.
Do they have the orange without the kickstand?
felloffthetruck said:
Do they have the orange without the kickstand?
Click to expand...
Click to collapse
No they all have kickstands, they have all black, blue, orange, pink, purple, yellow, white and red.
They do have another case, that is called the Urban Ranger, its a TPU case, no kickstand.
https://forum.xda-developers.com/s10-plus/accessories/samsung-galaxy-s10-plus-t3905296/post79587900
Looks similar to my SupCase (https://www.amazon.it/gp/product/B07N4LKB3F/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) which is a massive cover but offers a pretty good protection.
I don't have a wireless charger (I only charge vua USB cable) but I couldn't charge my Gear S3 with Wireless PowerShare. Removing the cover the watch can be correctly charged.
Someone had similar issues ?
Thanks
S
primus123 said:
Hello,
So I got a case from ArmadilloTek.
I got the Vanguard Series Case in Orange for my S10+
Can find link here:
https://www.amazon.com/gp/product/B07MLZW7XQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I took advantage from an earlier post about getting one for free in exchange for feedback.
Packaging:
Looks just like an otterbox package. Not that matters to me.
Packaging did seem a little "loose" a lot of movement on the inside.
Other than that, thats about it for the package.
The case was not put together it was separated by a piece of hard styrofoam.
I like cases that you dont have to take apart first.
Also came with a note that looks like it was hand written and then copied to go out to everyone. Nice little idea.
Pros:
The color matches almost 100% the color on the details page which is nice.
Little groove arrows on the side do make it for easier handling. I do like that design, some may not.
Back of case Design:
The camera cut out is nice, and does not interfere with the camera abilities and does not affect the camera flash either.
The bottom flaps for Headphone and Charging port are easy to open. and they feel very well made that wont break off with just few uses.
Buttons: All the buttons work with normal pressing. No hard press, or squeezing of the phone to make them work.
Front:
The case sits up on the phone, creating space from the screen and any surface that it will be against. So i like this design.
Even with the higher bezels for the case it does not interfere with the top notification bar being pulled down, or activating the edge screen.
The case looks to be very durable, but I do not plan on testing that out on purpose. But, if i do drop it I will report back with my review after.
Case is real easy to clean. I got it pretty dirty and use an alcohol wipe to clean it and it wiped right off.
Works just like normal for wireless charging and wireless power sharing.
Cons:
Does add extra weight to the device
Kickstand feels a little flimsy, thinking prolonged use could break it, also, it could have been a rotating one with a ring style since alot of companies are adding those now. That would make for easier use. (may only be a con for me)
Corners are kind of Squared, not rounded, so I feel it gets caught a little in the pocket. Works well in jeans, but gyms clothes and dress pants it gets caught up in them.
Overall I would rate this easy at 4.5* out of 5*
If you have one, or had one, or are looking to get one drop a comment here and lets chat about it.
Click to expand...
Click to collapse
Very good for curved screen full body protectors, the way you lay the frame down overtop first then snap the case in.
It is very difficult to use the edge panels and One Hand Operation+ with this case. The Supcase UB Pro has less of a side lip, which makes it easier to swipe the curved edges and therefore use these features. FYI.
Dr. Fed said:
It is very difficult to use the edge panels and One Hand Operation+ with this case. The Supcase UB Pro has less of a side lip, which makes it easier to swipe the curved edges and therefore use these features. FYI.
Click to expand...
Click to collapse
Thanks for the alternate case.
I havent had any issues with the edge screen.
I do however have the edge panel slider at full thickness, I wonder if that plays a big part of it.
Have you tried enlarging the edge panel slider?
why dont they provide screen protector like OTTERBOX?
taoisawesome said:
why dont they provide screen protector like OTTERBOX?
Click to expand...
Click to collapse
If you mean a "tempered glass" protector, they omit it because standard ones block the fingerprint reader. One company made a tempered glass screen protector that purportedly works with the fingerprint reader. Unfortunately, they have a patent and it cost around/above $50.
primus123 said:
Thanks for the alternate case.
I havent had any issues with the edge screen.
I do however have the edge panel slider at full thickness, I wonder if that plays a big part of it.
Have you tried enlarging the edge panel slider?
Click to expand...
Click to collapse
I can make my edge panel handle longer or shorter, and I can change it's position. However, I cannot make it thicker or thinner.
Dr. Fed said:
I can make my edge panel handle longer or shorter, and I can change it's position. However, I cannot make it thicker or thinner.
Click to expand...
Click to collapse
I check app log, seems it updated about a week ago.
There was a function that the edge panel could become thicker, not just longer.
That function is no longer there.
I do notice now that my panel is much smaller than it was previously, actually making it harder to activate the edge panel.
Hmmm, weird.
primus123 said:
I check app log, seems it updated about a week ago.
There was a function that the edge panel could become thicker, not just longer.
That function is no longer there.
I do notice now that my panel is much smaller than it was previously, actually making it harder to activate the edge panel.
Hmmm, weird.
Click to expand...
Click to collapse
the new update has new issues, sigh
Thank you for your review, We already change our design, all the kickstand ON Note 10 and future models WILL BE STRONGER!
Wanted to share with you all, a really good case that is worth the money for this phone, and I am really happy with it.
The case is intended to put on and leave on, hence the adhesive films on the inside of the front cover, the back (with yellow cushioning) just clips on with a strong solid tight fit. The front cover bezel/lip looks to be about 2.5-3mm deep, but accessing the right side soft menu still good. My finger size is about average/medium size and I have no problem also accessing the power button and fingerprint sensor on the side beside the s-pen.
Used the glue adhesives on the front screen that were already applied, just had to pull off the backings (They also included an extra set of glue adhesive strips for a second mount if you ever need to take off and put back on) and it fits perfect, lines up with all the holes and speaker grills. The back piece with the hinge cover (with 2 spring loaded hinges), protects the back and fold hinge while the lip around the camera protects the camera lenses. It too also has perfect alignment with holes and has lots of clearance with the USB C port fitting. The hinge cover protector also gives you something to hold/grip when the phone is unfolded.
Suggest you first get a front glass screen protector (I used the Spigen Glastr Ez Fit for perfect alignment and easy application) for the front and camera lenses protectors also before applying this case.
This quality case feels very good, smooth, solid, elegant, and provides a great grippy feel. More importantly, I feel more confident holding the phone with this case on, as it feels like it could weather some accidental mishaps and protect the phone.
In my pictures, you will notice I also put a pop socket on the back centre for four reasons:
1) use for general holding in hand, even more support than the hinge cover protection bump when fully open
2) use as a kick stand for front screen and/or the unfolded full screen
3) use for a magnetic mount that I have in my car - so phone can sit in folded vertical or horizontal orientation and also unfolded orientation, using a pop socket flat mount with the metal plate stuck on the back of it- I just slide my pop socket into the pop socket flat mount holder and then attach to the magnetic mount, which also allows me to:
4) wireless charge at home, by twisting the top half of the pop socket half a turn to remove, when it is pushed in, which will allow a closer clearance for wireless charging through the case as it is all plastic
One critical point based on the design of the spring loaded hinge cover protector, when you do unfold/open the phone to full screen, and you are using the back screen for taking a selfie, you loose about 1 cm of view area on the left of the front screen. This minor con is something I can live with as this is in only this situation and for the design, it is a great compromise having that hinge protection.
In closing, I am really happy I got this case. I was originally worried that it might be too bulky, eventually ending up removing it for a thinner/smaller case, but I think it has a great balance of protection, holds the s-pen on the front side of screen keeping it's thickness down (compared to the Samsung pen/kickstand case, or others in some cases), and one of the few cases that protects the hinge, allowing the phone full protection around the whole phone. Hopefully you found this helpful for your situation.
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
I read a lot about people having a challenge to pull the case cover off on the Z fold 3, some had glued the back on also which the current 4 version doesn't have or need, as it snaps on pretty good, but some with the 3 did use the glue strips which made it a challenge to get off. I can't speak to this Z fold 4 vs the 3 case, but having used it a couple of days, I still think it is a solid quality case.
It is a "little" thicker than the Samsung pen case, but not by much, and the pen holder on the Spigen sits in a nice place compared to the Samsung making it thinner right away, even with the hinge on the back when opened up. I understand why they need the glue adhesive on the front protection cover, as it needs to stay locked on especially when you are pulling on the s-pen constantly. What I really like is that it does protect the Fold's hinge area also... the Latercase is super thin, so less protection and the hinge is susceptible when folded with mishaps and for me I use both the front and the inside about the same. I can't see me taking the front cover off for a long time and don't think I will need to clean from the inside on the front panel as the fit is super tight, but the back can be snapped off easily if necessary. There are a lot of people that have used the Latercase as it is thin and has good grip, but doesn't have the "bunker" safety. As I mentioned in my closing casual review, I was afraid the size of the case would be too much for the protection it offers, but it is a lot better than I thought it would be in terms of weight/thickness and with the hinge protection and great pen storage location, I am very happy with it.
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
Had the same issue with mine. Damaged and scratched my z fold 3 due to the case adhesive.
Tried to go another route for my fold 4 and got the vrs terra guard modern case, It looked alright & initially I was happy as it had Good Protection. It felt more plasticy than the spigen version but i liked the design so ignored the finish.
Over my 4 days of use I found that the magnets in the hinge created big dead spots in the inner screen where the S-Pen wouldn't register.
Screen protector included is much smaller than the active screen area. (So basically useless)
The hinge created a weird noise while opening and closing which i ignored and it eventually broke after 4 days of use (the hinge created tension in the plastic holding it and lifted the inner base of the case and broke).
Thankfully no damage to the phone.
I'll probably try the iblason or supcase I saw on some youtube channels they looked solid and only had one small piece of adhesive tape for the top cover.
Syd91 said:
Screen protector included is much smaller than the active screen area. (So basically useless)
Click to expand...
Click to collapse
Spigen screen protector for the outer small screen is very good. Although its not edge to edge which will hinder with cases.
_GRIZZLY_ said:
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
Click to expand...
Click to collapse
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
jonstatt said:
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
Click to expand...
Click to collapse
Interesting, so in this case scratches problem can be unfortunetly hard to resolve.
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
For its price, its terribly expensive. There are cases just like it for 30% less money that use magnets on the hinge instead of glue, and the material feels better. I feel as though Spigen rips people off and they must have massive profit margins if you see the cases that show up on amazon and aliexpress.
What case do you recommend then?
Q-Prof said:
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
Click to expand...
Click to collapse
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
elio321 said:
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
Click to expand...
Click to collapse
Hey Elio,
Congrats on getting the Z Fold 4,
No issues with the finger print reader, I have average sized hands and thumb works all the time, there is enough room. Yes it is expensive, but well worth it, you wont feel ripped off as it is excellent quality, and there is no other design out there that has this unique set of design features. The case feels really good in the hand (not plastic feel... more of a smooth rubbery feel, so great grip) and it fits like a glove on the case. As for charging wirelessly, no problem... I even have a removable pop socket and an ESR phone boost kickstand, and still no problem charging after I remove the top of the pop socket (just a quick 1/2 twist when it is pushed in). Not only easier access to the pen, but better placement in my opinion, I would rather have a little wider than making it thicker... it already is thick because of the fold design... so why put a storage s-pen on the back... and putting it in the hinge protector like some designs makes the hinge protector a huge bump on the back when open.
I have very negative experience with the Spigen cover cases for Fold 4. The first one, the Tough Armor got broken after 16 days. The second one, the Slim Armor Pro got broken today after 4 months. Totally, I lost almost 150€ for these two cases ;-( I will request replacement. My conclusion is there is no way to make a good unbreakable cover case for Fold 4. For my previous non-foldable phones the Spigen cover cases where perfect.