Develop Bugs

[TWRP-3.1.1] Unofficial TWRP for the UMI SUPER

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
CHANGELOG for 3.1.1-0:
-waiting for official docs, looks like any thread has been updated.. Nor official website
CHANGELOG for 3.1.0-0:
-vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
-adb backup to stream a backup directly to or from your PC, see documentation here: doc (bigbiff)
-tweak MTP startup routines (mdmower)
-support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
-support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
-better indicate to users that internal storage is not backed up (Dees_Troy)
-improve automatic determination of TW_THEME (mdmower)
-minimal getcap and setcap support (_that)
-try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
-shut off backlight with power key (mdmower)
-timeout during FDE decrypt (Dees_Troy and nkk71)
-support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
-boot slot support (Dees_Troy)
-TWRP app install prompt during reboot (Dees_Troy)
-support for AB OTA zips (Dees_Troy)
-support new Android 7.x log command (Dees_Troy)
-update recovery sources to AOSP 7.1 (Dees_Troy)
-numerous bugfixes and improvements by too many people to mention
INSTALLATION:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version above
2) Reboot to TWRP
3) Hit Install and tap the "Install Image" button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
To install from SP Flash Tools:
1) Download scatter file attached to this post
2) Load scatter file into SPFT
3) Plug USB cable into device and computer
4) Press download in SPFT
5) Reboot device
Download:
3.1.0: Google Drive
3.1.1: Android File Host
XDA:DevDB Information
Unofficial TWRP for the UMI SUPER, Tool/Utility for all devices (see above for details)
Contributors
joe2k01
Source Code: https://github.com/joe2k01/android_device_umi_SUPER/tree/TWRP
Version Information
Status: Testing
Created 2017-03-19
Last Updated 2017-05-14

Flashing said OK in Flash Tool but nothing is different in power+volup or power+voldown.
Using the latest March rom from their forum.

Problem with TWRP
gayfagxxx said:
Flashing said OK in Flash Tool but nothing is different in power+volup or power+voldown.
Using the latest March rom from their forum.
Click to expand...
Click to collapse
Same problem !
any solutions :crying:

Same problem as the friends above @SerialFlasher33 and @gayfagxxx .
I transfer the TWRP successfully via sp flash tool, pore at the time of loading anything on the screen nothing.
Already tried several versions of TWRP.
Here I have android 7 already with update.

rexbauru said:
Same problem as the friends above @SerialFlasher33 and @gayfagxxx .
I transfer the TWRP successfully via sp flash tool, pore at the time of loading anything on the screen nothing.
Already tried several versions of TWRP.
Here I have android 7 already with update.
Click to expand...
Click to collapse
SerialFlasher33 said:
Same problem !
any solutions :crying:
Click to expand...
Click to collapse
gayfagxxx said:
Flashing said OK in Flash Tool but nothing is different in power+volup or power+voldown.
Using the latest March rom from their forum.
Click to expand...
Click to collapse
You must boot in TWRP exactly after flashing it: Flash in SPFT then start pressing volup and then press power

could you also share this new build here?
https://forum.xda-developers.com/general/general/umi-install-custom-recovery-twrp-cwm-t3385733
any scatter file provided to flash it via Flashtool?
thnx

megthebest said:
could you also share this new build here?
https://forum.xda-developers.com/general/general/umi-install-custom-recovery-twrp-cwm-t3385733
any scatter file provided to flash it via Flashtool?
thnx
Click to expand...
Click to collapse
You can use the stock ROM's scatter file

joe2k01 said:
You can use the stock ROM's scatter file
Click to expand...
Click to collapse
I know my friend, it's not for me but for all users that can be in trouble without scatter provided (if they come from stock Umi Super).
So is only a suggestion..
thanks anyway

joe2k01 said:
You must boot in TWRP exactly after flashing it: Flash in SPFT then start pressing volup and then press power
Click to expand...
Click to collapse
Thanks, this worked.
I used the latest march rom on my phone and loaded the scatter from the same rom. I obtained the rom file and the flash tool on the UMi forums.
Then I un-ticked everything and changed the location to the recovery, pressed download, shutdown my phone, waited for it to be done, unplugged it, held volup+power and now it works.

Unfortunately for me it does not work ... I tried to start immediately the phone into recovery but after a short flash the display starts the system stock umi

@bastard81 can you try to connect your phone(powered on) and from adb type adb reboot recovery ?

joe2k01 said:
@bastard81 can you try to connect your phone(powered on) and from adb type adb reboot recovery ?
Click to expand...
Click to collapse
I tried, but even this system seems to not work. The phone will restart, and for a moment I see the display flashing. After it starts immediately with the system but without going into recovery ...
I do not know what else to try .. From the developer options have also enabled the oem unlock. Also tried without. Reinstalled 3 times with spflashtool and everything works perfectly. But the recovery just does not want to work.
Ps thanks for your support

bastard81 said:
I tried, but even this system seems to not work. The phone will restart, and for a moment I see the display flashing. After it starts immediately with the system but without going into recovery ...
I do not know what else to try .. From the developer options have also enabled the oem unlock. Also tried without. Reinstalled 3 times with spflashtool and everything works perfectly. But the recovery just does not want to work.
Ps thanks for your support
Click to expand...
Click to collapse
I guess you some how corrupted recovery partition, try to backup your IMEIs and then try the option format all+reflash on SPFT. You'll lose IMEI

worked well with me (Y)

Hi joe2k01 from the forum 4PDA. Thanks for the work. Put Your TWRP3.1.0 through TWRP3.0.2 and tested on firmware v7.01_20170123. While there are no errors.

Cant Get into Anything But TWRP
I Flashed Twrp, Twrp works fine, just nothing else. Even flashed a rom and have no boot just twrp.
TIA

joe2k01 said:
Team Win Recovery Project 3.x
Click to expand...
Click to collapse
you ****ing young hacker. you need to make reference to the authors , when you take other people's files...

jemmini said:
you ****ing young hacker. you need to make reference to the authors , when you take other people's files...
Click to expand...
Click to collapse
WTF is wrong with you man? You are in the credits list on GitHub. I took only your kernel since you are anti-opensource and don't want to explain how you built it.

bastard81 said:
I tried, but even this system seems to not work. The phone will restart, and for a moment I see the display flashing. After it starts immediately with the system but without going into recovery ...
I do not know what else to try .. From the developer options have also enabled the oem unlock. Also tried without. Reinstalled 3 times with spflashtool and everything works perfectly. But the recovery just does not want to work.
Ps thanks for your support
Click to expand...
Click to collapse
The same for me

Im on stock v3.02_20161121 odex from silent27 had TWRP 3.02 and just flashed TWRP 3.1.1 super img. over and it worked just fine.
On top of that flashed a twrp theme(310x v.2 hdpi light play theme by z31s1g) wich on TWRP 3.02 themes didnt worked for me.

[Recovery][J710F/FN/GN/MN/K] [Build 3][3.2.3-0] TWRP for j7xelte (Galaxy J7 2016)

Team Win Recovery Project 3.2.3-0
This is for the Exynos SM-J710F, SM-J710FN, SM-J710GN, SM-J710MN, SM-J710K models only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
Build 3 3.2.3-0
Older builds:
Build 2 3.2.3-0
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://odindownload.com/
FULL STEPS FOR ROOTING
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_(version).zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with Magisk:
Download the latest Magisk.
Without exiting TWRP, transfer the Magisk zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
KNOWN ISSUES
You need to wipe Data when on stock ROM
Changelog
Build 1: Initial release
Build 2: Update to M10 kernel and android-8.1 source (from android-6.0)
Build 3: Fix MTP problems and /vendor (invalid argument) + upstreamed M10 kernel to 3.18.134 with google recommended changes to kernel
NOTE: If you're on stock Oreo rom always make sure your system is read only. Don't let it be r/w
SOURCE CODE:
TWRP (android-9.0)
Device tree (android-8.1)
Kernel: (pie)

why is not on the official web?
idk this seems pretty sketchy

M4T145 said:
why is not on the official web?
idk this seems pretty sketchy
Click to expand...
Click to collapse
I can't instantly get official i can upload pictures btw

Is it support Android 8.1.0 Firmware?

TRalperenTR said:
Is it support Android 8.1.0 Firmware?
Click to expand...
Click to collapse
Yes but make sure you leave system read only and flash magisk instantly to fix dm verify

Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.

TRalperenTR said:
Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.
Click to expand...
Click to collapse
I don't know. Its a twrp bug maybe. Also download it again i built it using the M10 kernel now but it also says /vendor invalid argument

...

It is working fine checked it

This TWRP doesn't install Oxygen Kernel. It says "Recovery Busybox Setup Failed."

I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14

Sulltan Mehmood said:
I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14
Click to expand...
Click to collapse
3.18.135 newer then 3.18.14
If you have other twrp extract the .tar archive and move .img to phone and goto Install on twrp select Install Image and Click on it. Select recovery and swipe to confirm. Done

Hi, the link of the latest build is down, can you re-upload please?

I saw in other tutorials that when in stock 8.1 rom you need to erase all data from internal memory. If i do this, there is no longer a, /system folder so there is no rom and bootloop happens.
Do i need to do factory wipe instead? I know i have to wipe data because Its encripted and twrp cant access internal memory.
Im asking what kind of "wipe data" i need to do

just format data to decrypt
link please

bro it says download file does not exist on google drive

download link ??

https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS
---------- Post added at 17:28 ---------- Previous post was at 17:28 ----------
saquib996 said:
bro it says download file does not exist on google drive
Click to expand...
Click to collapse
Ofogh said:
download link ??
Click to expand...
Click to collapse
https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS

[CLOSED][RECOVERY] ORANGEFOX R11.0 for OnePlus 5 & 5T (Unofficial, Official soon)

OrangeFox Recovery
Replace TWRP with OrangeFox once and you won't go back
Last update: 22 November 2020. Build 2
Changelog:
- Updated Magisk to 21.1 (now clicking install magisk after rom installation will install magisk 21.1)
- Update Magisk uninstaller to latest build
- fixed a bug where some people couldn't use flashlight option inside recovery
- fastened things up for faster installations and backup
- minor bug fixes
Contents:
Overview
Why OrangeFox?
Features
Screenshots
Links
Installation procedure
OVERVIEW:
Probably the most beautiful recovery out there.
Synced with the latest Teamwin changes.
Designed with latest Material design 2 guidelines.
Included customization.
Inbuilt patches, like Magisk and password reset patch.
Password protection.
Fully open-source.
Frequently updated.
Why OrangeFox?
OrangeFox has been operating for over two years. In that time OrangeFox have improved the quality, stability, and device support of the recovery. Today OrangeFox is the leader in stability, UI design, and UX. Installing OrangeFox means being with the latest code and fastest fixes.
:good: Treble & Non-Treble Support
:good: No compatibility.zip error while flashing OxygenOS
:good: A lot of customisations
:good: Extremely beautiful UI ready to please your eyes.
:good: Dev team is always ready to fix your problems
:good: F2FS support
There were previously 10.1 builds for these devices for these devices and this is how current build is different from them:
New, more modern UI.
Fixed F2FS support
Upstreamed to R11
and many more...
Note: Official soon I've applied for it.
Screenshots
Screenshots at https://imgur.com/a/Ai8KWX9 and on Sourceforge
Links:
Support group: https://t.me/orangefoxop5t
Download: https://github.com/Maitreya29/OrangeFox-OnePlus-5-T/releases
Installation procedure:
There are two methods to install OrangeFox
A) Via a recovery (for those with TWRP installed):
1. To install an OrangeFox zip, flash it with OrangeFox (or any TWRP-compatible custom recovery) without any wipes.
2. Do the same thing if you want to upgrade OrangeFox
3. When you flash an OrangeFox zip, there is no need to flash any DFE or any other such thing
4.To install an OrangeFox img file, boot into fastboot mode, and run the command: fastboot flash recovery OrangeFox-xyz.img
B) Via Fastboot (For those without a recovery):
You need a PC for this. If you do not have a PC, or access to a PC, then you are stuck!
1. Unlock your bootloader (if not already unlocked)
2. Install adb, fastboot and the relevant USB drivers onto your PCs)
3. Download the correct OrangeFox zip file to your phone, and to your PC
4. Extract recovery.img from the OrangeFox zip file, and copy recovery.img to your PC’s adb directory
5. Reboot your phone into fastboot/bootloader mode
6. Open up a command line window / terminal emulator on your PC
7. Change to the adb directory on your PC
8. Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
9. Reboot into OrangeFox by pressing the power + volume down keys, until you see the OrangeFox splash screen
11. After OrangeFox has booted up, check that everything is working – eg, that it has mounted the data partition successfully, and that the touchscreen works.
12. Find and select the OrangeFox zip on your phone, tap on it, and swipe to install it (because OrangeFox Recovery needs some files from the zip)
After installation, the phone will automatically reboot into OrangeFox
Enjoy!

Thank you, I just installed it, I have everything set and customized! Not yet tested all the options but it's beautiful! Congratulations...

@Maitreya29 Since this supports both the 5 & 5T, would you like this thread to be moved to the 5 & 5T Cross Device Development forum? We can then close the same thread you created in the 5T forum since there won't be a need for it.

shadowstep said:
@Maitreya29 Since this supports both the 5 & 5T, would you like this thread to be moved to the 5 & 5T Cross Device Development forum? We can then close the same thread you created in the 5T forum since there won't be a need for it.
Click to expand...
Click to collapse
Hi there, thanks. Actually the download links for both the posts is different and I feel like I'd be able to give better support since I'd know which device is getting the error as both the 5 & 5T builds are different.

Maitreya29 said:
Hi there, thanks. Actually the download links for both the posts is different and I feel like I'd be able to give better support since I'd know which device is getting the error as both the 5 & 5T builds are different.
Click to expand...
Click to collapse
Alright, thanks.
Added to the OnePlus 5 Index Thread here.

shadowstep said:
Alright, thanks.
Added to the OnePlus 5 Index Thread here.
Click to expand...
Click to collapse
Thankn you, appreciate it

''IT DOESN'T DOWNLOAD IT JUST REFRESHES AFTER 5 SECONDS/DIRECT DOWNLOAD''. can you please look in to it thank you.

Sparda333 said:
''IT DOESN'T DOWNLOAD IT JUST REFRESHES AFTER 5 SECONDS/DIRECT DOWNLOAD''. can you please look in to it thank you.
Click to expand...
Click to collapse
It works fine for me, you must be having problems downloading. I don't host the download. Sourceforge does. However join the support group I'll share links.

Download links updated

I didn't have any issues downloading or installing... Are is fine now with my op5.

Awesome! Thank you

Finally ?

It seems working very nicely. Many thanks!

This version of OrangeFox cannot decrypt my Android R partition.
I just completed a clean wipe and fresh install of crDroid's R-based builds. I have a 7-digit PIN set for unlock. I am confident the PIN is correct, because it unlocks my phone. I have device encryption enabled. The known-good PIN is not accepted by OrangeFox to decrypt.

Thracks said:
This version of OrangeFox cannot decrypt my Android R partition.
I just completed a clean wipe and fresh install of crDroid's R-based builds. I have a 7-digit PIN set for unlock. I am confident the PIN is correct, because it unlocks my phone. I have device encryption enabled. The known-good PIN is not accepted by OrangeFox to decrypt.
Click to expand...
Click to collapse
Any recovery on android 11 can not decypt data with pin enabled. You need to set pattern for that.

Thracks said:
This version of OrangeFox cannot decrypt my Android R partition.
I just completed a clean wipe and fresh install of crDroid's R-based builds. I have a 7-digit PIN set for unlock. I am confident the PIN is correct, because it unlocks my phone. I have device encryption enabled. The known-good PIN is not accepted by OrangeFox to decrypt.
Click to expand...
Click to collapse
That's android 11 problem, A11 doesn't let recoveries decrypt with pin. Only patterns work.

This Recovery can decrypt the Data with Pattern in Android 11 ?

Thread closed on request of OP @Maitreya29 as the OP doesn't anylonger owns the device and is unable to support. However, thanks very much for your highly appreciated contributions.
Regards
Oswald Boelcke

Development [RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project

Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Hello, this is TWRP, for Poco F3/Mi 11X/Redmi K40
touch and adb work
flashing works
USB OTG works
Decryption is working
Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
3. select the new image
4. after that is done, if you were using a custom kernel, reflash it now
5. if you were using magisk, reflash it now
Send me a beer: Crypto(Preferred) | PayPal
Trees:
https://github.com/TeamWin/android_device_xiaomi_alioth
https://github.com/TeamWin/android_device_xiaomi_sm8250-common
Telegram group: https://t.me/NSSFB
Download: https://twrp.me/xiaomi/xiaomipocof3.html
Unofficial android 12 builds: https://www.pling.com/p/1836619/
mirror: https://store.kde.org/p/1836619/

Thanks for your hard work
All function has usable especially decryption.

Thank you mate!! That's is very important for all the community .What version of magisk i have to install??But you mean flash the zip of magisk??Thanks.

Awesome, mate!

I've been waiting for this, thank you sir for your contribution!

@Nebrassy Nice work - tested on my crDroid working-build and all ok

I only can say thank you a lot!! I'll buy a beer

"Failed to mount /data (Invalid argument) :/ Im on HentaiOS btw

reas0n said:
"Failed to mount /data (Invalid argument) :/ Im on HentaiOS btw
Click to expand...
Click to collapse
I believe that rom has customized encryption, so it's not supported

Nebrassy said:
I believe that rom has customized encryption, so it's not supported
Click to expand...
Click to collapse
Damn.. I will wait for any officially supported custom ROM then so I could just get OTAs, I dont want to do another wipe and setup lol. thx anyway

raystef66 said:
@Nebrassy Nice work - tested on my crDroid working-build and all ok
Click to expand...
Click to collapse
your what?

raystef66 said:
@Nebrassy Nice work - tested on my crDroid working-build and all ok
Click to expand...
Click to collapse
Not shared as yet?

arifqur said:
Not shared as yet?
Click to expand...
Click to collapse
Not yet. Won't take long though when first release will be posted in development.

this works "out of the box" for poco f3 with miui 12.x?

Thank you

Henkl said:
this works "out of the box" for poco f3 with miui 12.x?
Click to expand...
Click to collapse
answering my own question: you have to unlock the phone first with MIUI unlock tool.
AND unlocking involves wiating on part of xiaomi site afer registering ...can be even 7 days..

Hello I am not sure I didn't mess around with the job !!
Firstly, I have copied the twrp image on my device but the twrp didn't see it, so I have plugged an otg device with the file on it.
Now twrp is installed but it can't decrypt data (ask for password)
What is wrong pls ?
Secondly, when I have solved that, could I backup the boot.img with Twrp to be then patched with the Magisk installer app ?
Is it the best way to have Magisk on my device ?
Thanks !

lejeanlouisF said:
Hello I am not sure I didn't mess around with the job !!
Firstly, I have copied the twrp image on my device but the twrp didn't see it, so I have plugged an otg device with the file on it.
Now twrp is installed but it can't decrypt data (ask for password)
What is wrong pls ?
Secondly, when I have solved that, could I backup the boot.img with Twrp to be then patched with the Magisk installer app ?
Is it the best way to have Magisk on my device ?
Thanks !
Click to expand...
Click to collapse
So it asked for password, did you enter it?
As for magisk, just flash latest magisk apk with twrp

lejeanlouisF said:
Hello I am not sure I didn't mess around with the job !!
Firstly, I have copied the twrp image on my device but the twrp didn't see it, so I have plugged an otg device with the file on it.
Now twrp is installed but it can't decrypt data (ask for password)
What is wrong pls ?
Secondly, when I have solved that, could I backup the boot.img with Twrp to be then patched with the Magisk installer app ?
Is it the best way to have Magisk on my device ?
Thanks !
Click to expand...
Click to collapse
The password is ur security PIN for unlocking ur phone.
No idea about backuping the boot.img in TWRP (I am not using it )

Nebrassy said:
So it asked for password, did you enter it?
As for magisk, just flash latest magisk apk with twrp
Click to expand...
Click to collapse
I have entered a password but it failed. Is it a free password ?
EDIT : It's ok, sorry. the security PIN, of course !!!
EDIT 2 : And Thank you very much for your work and your help

Development [RECOVERY][3.7.0_12-8][UNOFFICIAL][UNIFIED] TWRP with A12/A13 encryption support

This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too.
As always I'm not responsible for any bricked device or data loss resulting from the use of this TWRP builds. You use this at your own risk.
For ROMs using FBEv1 encryption aka A11 encryption, please use the official builds by @Nebrassy from:
[RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Download:
twrp-3.7.0-12.1 - Google Drive
drive.google.com
Installation:
Permanent installation is not possible with TMO stock ROM installed.
Installation overwrites all boot partition changes done previously (e.g. by Magisk or custom kernel). So you have to reflash all zips that change the boot partition after TWRP is installed.
For permanent installation, you have three options depending on your current system.
1. Option for rooted devices:
Download the twrp-installer zip
Flash it with Magisk manager or some other kernel flash utility
Reflash your custom kernel and Magisk.apk if previously installed (see example of how to install with Magisk manager below). Or alternatively flash zips in TWRP.
Don't reboot
Rename downloaded Magisk.apk to Magisk.zip
Open Magisk app
Select Modules tab
Click "Install from storage"
Select Magisk.zip
2. Option for users with other custom recoveries but without root:
Download the twrp-installer zip
Reboot to recovery
Flash it with "adb sideload twrp-installer*.zip"
Reboot to recovery
Reflash your custom kernel and Magisk.apk if previously installed
3. Option is universal:
Download boot.img
Reboot to bootloader
Run "fastboot boot boot.img" with the TWRP boot image on your PC
Go to Advanced > Flash Current TWRP
Reflash your custom kernel and Magisk.apk if previously installed
Try without installation:
Download boot.img
Reboot to bootloader
Run "fastboot boot boot.img" with the TWRP boot image on your PC
Uninstall:
Just flash the boot partition with your current ROMs boot image with the following steps.
Replace "YOUR ROM BOOTIMAGE" with the filename of the extracted boot image of your current ROM.
Reboot to bootloader
Run "fastboot flash boot_a YOUR ROM BOOTIMAGE"
Run "fastboot flash boot_b YOUR ROM BOOTIMAGE"
Alternatively you can flash your currently installed OTA zip, which overwrites boot on the unused slot, but not on the currently used one.
TWRP Updates:
Download and flash the twrp-installer zip
After that reflash your custom kernel and Magisk if previously installed
ROM Updates:
Please follow the official update instructions for your ROM!
If they give an option to update via recovery you have to substitute adb sideload commands with zip installations. Also use the "Automatically reflash TWRP after flashing a ROM" option, if you are going to install a ROM zip to preserve TWRP installation.
In case your ROM does not provide a recovery update instruction you can try to update via recovery but you are on the safe side if you follow the official instructions. They always have a reason for their particular update instructions!
Instructions that work for me (on LOS based ROMs):
Flash ROM zip with "Automatically reflash TWRP after flashing a ROM" checked
Flash your previously installed zips (custom kernel, Gapps, Magisk, etc)
Reboot to system
If Gapps packages keep crashing:
Reboot to TWRP
Flash Gapps again
Reboot to system
For OOS updates should work out of the box, but if you have issues you can follow these steps (I haven't tested them):
[RECOVERY][3.7.0-12.1][UNOFFICIAL][UNIFIED] TWRP with A12/A13 encryption support
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too. As always I'm not responsible for...
forum.xda-developers.com
About backups/restore:
Restore data only WITHOUT pin/pattern set.
If you restore a backup made from another ROM, then the currently installed, you may have to format data. So please manually copy all contents from /sdcard to a PC or flash drive.
Backups can be made with or without pin/pattern set. It is always good practice to copy your backups to your PC or an USB drive. Also after you restored your data partition you have to reboot to system and do a second reboot to get a working system.
To make first boot faster and eliminate the need to reboot again, additionally use the step mandatory for OOS users.
If you want to copy your backup to PC, but it doesn't show up, flash change_backup_selinux_context.zip, which is available in download folder.
For OOS users:
When data is restored, you have to delete "/data/system/users/0/package-restrictions.xml" before rebooting to system.
In case you restore a backup with pin/pattern set or have some other issues I have a guide that works for me:
[RECOVERY][3.7.0-12.1][UNOFFICIAL][UNIFIED] TWRP with A12/A13 encryption support
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too. As always I'm not responsible for...
forum.xda-developers.com
How to use MTP, adb and fastbootD:
Windows:
Install official Google USB drivers and select the right USB drivers. For MTP and adb, the WinUSB driver is sufficient on Windows 11. For fastbootD, Google drivers (Android Bootloader interface) has to be chosen.
You may have to select WinMTP for MTP and Google USB drivers for adb, if you run Windows 10.
To use adb on Windows, MTP has to be disabled with "Mount->Disable MTP" in TWRP.
Steps for choosing a specific driver (no the exact wording):
Connect phone in specific mode
Open device manager
Right click on phone either under "Android device" or "USB device", depending on mode
Select "update driver"
Select 2. option "browse my computer"
Select "pick from available drivers"
Pick driver according to above description
Linux:
Intall the fastboot and adb packages for your distribution
Set udev rules. There might be a package for your distro or use this gh repo: https://github.com/M0Rf30/android-udev-rules
Add user to the group used in udev rules. Most common are "plugdev" and "adbusers"
Source Code:
TWRP: https://github.com/TeamWin/android_bootable_recovery
Kernel: https://github.com/nilz3000/kernel_oneplus_sm8350-twrp
Device Tree:
https://github.com/nilz3000/device_oneplus_sm8350-common-TWRP
https://github.com/nilz3000/device_oneplus_lemonadep-TWRP
https://github.com/nilz3000/android_hardware_oplus
Bugs:
Permanent installation alongside TMO stock isn't possible
Error message regarding vendor_dlkm in fastbootD for OOS users (just cosmetic and not problematic)
In case you notice anything else please let me know.
If you encounter any bug, please give me description with logcat.txt and recovery.log output attached. You can copy those to your data folder in TWRP, if you go to Advanced->Copy Logs.
Thanks to:
@Nebrassy for the original device tree
@osm0sis for the zip installer
TWRP team
LineageOS

Thank you for this! Will try tomorrow.

Ah man this is dope. Thank you bud!!!

It seems to boot and decrypt very well, but backup always fails with error createtarfork 255

EugenStanis said:
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
Click to expand...
Click to collapse

EugenStanis said:
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
Click to expand...
Click to collapse
Can you send me the logcat and recovery.log output of the failing backup? You find that option in Advanced -> Copy Log -> Include Logcat. I will look into it.

Hi Guys,
Can the latest TWRP be used to flash A13 ROMs like we used to do with older devices? I am fed up with wiping the entire storage for every ROM installation using sideloading...

vipinpvarghese said:
Hi Guys,
Can the latest TWRP be used to flash A13 ROMs like we used to do with older devices? I am fed up with wiping the entire storage for every ROM installation using sideloading...
Click to expand...
Click to collapse
Updating A13 ROMs, in my case crdroid 13, works fine. I have not tested clean installation of a different ROM after factory reset with user data preservation.

der_akinator said:
Updating A13 ROMs, in my case crdroid 13, works fine. I have not tested clean installation of a different ROM after factory reset with user data preservation.
Click to expand...
Click to collapse
You meant to say you just wiped data, cache and dalvik and flashed the ROM zip via TWRP ? Or without data wipe?

vipinpvarghese said:
You meant to say you just wiped data, cache and dalvik and flashed the ROM zip via TWRP ? Or without data wipe?
Click to expand...
Click to collapse
Yes, but it was the same ROM I reinstalled after wipe.

der_akinator said:
Can you send me the logcat and recovery.log output of the failing backup? You find that option in Advanced -> Copy Log -> Include Logcat. I will look into it.
Click to expand...
Click to collapse

der_akinator said:
Can you send me the logcat and recovery.log output of the failing backup? You find that option in Advanced -> Copy Log -> Include Logcat. I will look into it.
Click to expand...
Click to collapse
Sorry i forgot about recovery log

EugenStanis said:
Sorry i forgot about recovery log
Click to expand...
Click to collapse
recovery.log
Zippyshare.com - Free File Hosting
www1.zippyshare.com

Anyone tested it with stock OOS13?

der_akinator said:
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by most Android 12 and 13 ROMs.
As always I'm not responsible any bricked device or data loss resulting from the use of this TWRP version. You use this at your own risk.
For ROMs using FBEv1 encryption aka A11 encryption, please use the official builds by @Nebrassy from:
[RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Download:
twrp-3.7.0-12.1 - Google Drive
drive.google.com
Installation:
Get your rom's vendor_boot image. For most ROMs this can usually be downloaded. For OOS based ROMs you can get it for example by extracting it from the official payload.bin with payload-dumper-go. A third universal option, if you have root, is to use the command "dd if=/dev/block/by-name/vendor_boot_SLOT of=/sdcard/vendor_boot.img" on your device. This writes the vendor_boot image to your sdcard folder, but you have to substitute SLOT with either a or b, depending on your currently active slot.
Reboot to bootloader.
Run "fastboot flash vendor_boot vendor_boot.img" with the TWRP vendor_boot image.
Run "fastboot boot boot.img" with the TWRP boot image.
Go to Advanced > Flash Current TWRP.
After that is done, if you were using a custom kernel, reflash it now.
If you were using magisk, reflash it now.
Reboot to bootloader.
Run "fastboot flash vendor_boot vendor_boot.img" with the ROM vendor_boot image from step one.
In the case you just want to test TWRP without installation, please skip steps 5-7.
Permanent installation works fine for me with crdroid 13 and magisk installed. I have not tested any other ROMs or custom kernels. After permanent installation you can at any time reboot to recovery without reflashing vendor_boot. During a ROM update use the "Automatically reflash TWRP after flashing a ROM" option in the install zip menu to preserve TWRP.
Source Code:
TWRP: https://github.com/TeamWin/android_bootable_recovery
Kernel: https://github.com/LineageOS/android_kernel_oneplus_sm8350
Device Tree:
https://github.com/nilz3000/device_oneplus_sm8350-common-TWRP
https://github.com/nilz3000/device_oneplus_lemonadep-TWRP
https://github.com/LineageOS/android_hardware_oplus
Bugs:
Please let me know. I have not encountered anything major yet.
Thanks to:
Nebrassy
TWRP team
LineageOS
Click to expand...
Click to collapse

For the cRDroid 13, which OOS Base are you using? I used C66, with own rec fine, if use your TWRP 3.7.0, can't boot.

Update
Hi everyone,
I just uploaded a new build. It fixes some missing firmware files and kernel module loading.
USB OTG, vibration and battery status is now working.
Download:
29.11.22 - Google Drive
drive.google.com

EugenStanis said:
It seems to boot and decrypt very well, but backup always fails with error createtarfork 255
Click to expand...
Click to collapse
Your problem seems to be a general TWRP problem, that oftentimes happens in multiuser system. And I couldn't access your recovery.log. In this file you find conflicting files, that are the reason for the error.
Here is a link to the github issue, maybe it helps you solving the problem.
createTarFork() process ended with ERROR: 255 when trying to back up data with multiple users · Issue #1373 · TeamWin/Team-Win-Recovery-Project
Yes, I am running an official build of TWRP, downloaded from https://twrp.me/Devices/ (Oneplus 6) Yes, I am running the latest version of TWRP (3.2.3-1) Yes, I have read the FAQ (https://twrp.me/FA...
github.com

tnchng said:
For the cRDroid 13, which OOS Base are you using? I used C66, with own rec fine, if use your TWRP 3.7.0, can't boot.
Click to expand...
Click to collapse
I use C.63 and have not tested with other firmware versions.

der_akinator said:
Your problem seems to be a general TWRP problem, that oftentimes happens in multiuser system. And I couldn't access your recovery.log. In this file you find conflicting files, that are the reason for the error.
Click to expand...
Click to collapse
Strange, i have never ever in my life used multiuser