Develop Bugs

[TWRP-3.1.1] Unofficial TWRP for the UMI SUPER

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
CHANGELOG for 3.1.1-0:
-waiting for official docs, looks like any thread has been updated.. Nor official website
CHANGELOG for 3.1.0-0:
-vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
-adb backup to stream a backup directly to or from your PC, see documentation here: doc (bigbiff)
-tweak MTP startup routines (mdmower)
-support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
-support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
-better indicate to users that internal storage is not backed up (Dees_Troy)
-improve automatic determination of TW_THEME (mdmower)
-minimal getcap and setcap support (_that)
-try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
-shut off backlight with power key (mdmower)
-timeout during FDE decrypt (Dees_Troy and nkk71)
-support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
-boot slot support (Dees_Troy)
-TWRP app install prompt during reboot (Dees_Troy)
-support for AB OTA zips (Dees_Troy)
-support new Android 7.x log command (Dees_Troy)
-update recovery sources to AOSP 7.1 (Dees_Troy)
-numerous bugfixes and improvements by too many people to mention
INSTALLATION:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version above
2) Reboot to TWRP
3) Hit Install and tap the "Install Image" button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
To install from SP Flash Tools:
1) Download scatter file attached to this post
2) Load scatter file into SPFT
3) Plug USB cable into device and computer
4) Press download in SPFT
5) Reboot device
Download:
3.1.0: Google Drive
3.1.1: Android File Host
XDA:DevDB Information
Unofficial TWRP for the UMI SUPER, Tool/Utility for all devices (see above for details)
Contributors
joe2k01
Source Code: https://github.com/joe2k01/android_device_umi_SUPER/tree/TWRP
Version Information
Status: Testing
Created 2017-03-19
Last Updated 2017-05-14

Flashing said OK in Flash Tool but nothing is different in power+volup or power+voldown.
Using the latest March rom from their forum.

Problem with TWRP
gayfagxxx said:
Flashing said OK in Flash Tool but nothing is different in power+volup or power+voldown.
Using the latest March rom from their forum.
Click to expand...
Click to collapse
Same problem !
any solutions :crying:

Same problem as the friends above @SerialFlasher33 and @gayfagxxx .
I transfer the TWRP successfully via sp flash tool, pore at the time of loading anything on the screen nothing.
Already tried several versions of TWRP.
Here I have android 7 already with update.

rexbauru said:
Same problem as the friends above @SerialFlasher33 and @gayfagxxx .
I transfer the TWRP successfully via sp flash tool, pore at the time of loading anything on the screen nothing.
Already tried several versions of TWRP.
Here I have android 7 already with update.
Click to expand...
Click to collapse
SerialFlasher33 said:
Same problem !
any solutions :crying:
Click to expand...
Click to collapse
gayfagxxx said:
Flashing said OK in Flash Tool but nothing is different in power+volup or power+voldown.
Using the latest March rom from their forum.
Click to expand...
Click to collapse
You must boot in TWRP exactly after flashing it: Flash in SPFT then start pressing volup and then press power

could you also share this new build here?
https://forum.xda-developers.com/general/general/umi-install-custom-recovery-twrp-cwm-t3385733
any scatter file provided to flash it via Flashtool?
thnx

megthebest said:
could you also share this new build here?
https://forum.xda-developers.com/general/general/umi-install-custom-recovery-twrp-cwm-t3385733
any scatter file provided to flash it via Flashtool?
thnx
Click to expand...
Click to collapse
You can use the stock ROM's scatter file

joe2k01 said:
You can use the stock ROM's scatter file
Click to expand...
Click to collapse
I know my friend, it's not for me but for all users that can be in trouble without scatter provided (if they come from stock Umi Super).
So is only a suggestion..
thanks anyway

joe2k01 said:
You must boot in TWRP exactly after flashing it: Flash in SPFT then start pressing volup and then press power
Click to expand...
Click to collapse
Thanks, this worked.
I used the latest march rom on my phone and loaded the scatter from the same rom. I obtained the rom file and the flash tool on the UMi forums.
Then I un-ticked everything and changed the location to the recovery, pressed download, shutdown my phone, waited for it to be done, unplugged it, held volup+power and now it works.

Unfortunately for me it does not work ... I tried to start immediately the phone into recovery but after a short flash the display starts the system stock umi

@bastard81 can you try to connect your phone(powered on) and from adb type adb reboot recovery ?

joe2k01 said:
@bastard81 can you try to connect your phone(powered on) and from adb type adb reboot recovery ?
Click to expand...
Click to collapse
I tried, but even this system seems to not work. The phone will restart, and for a moment I see the display flashing. After it starts immediately with the system but without going into recovery ...
I do not know what else to try .. From the developer options have also enabled the oem unlock. Also tried without. Reinstalled 3 times with spflashtool and everything works perfectly. But the recovery just does not want to work.
Ps thanks for your support

bastard81 said:
I tried, but even this system seems to not work. The phone will restart, and for a moment I see the display flashing. After it starts immediately with the system but without going into recovery ...
I do not know what else to try .. From the developer options have also enabled the oem unlock. Also tried without. Reinstalled 3 times with spflashtool and everything works perfectly. But the recovery just does not want to work.
Ps thanks for your support
Click to expand...
Click to collapse
I guess you some how corrupted recovery partition, try to backup your IMEIs and then try the option format all+reflash on SPFT. You'll lose IMEI

worked well with me (Y)

Hi joe2k01 from the forum 4PDA. Thanks for the work. Put Your TWRP3.1.0 through TWRP3.0.2 and tested on firmware v7.01_20170123. While there are no errors.

Cant Get into Anything But TWRP
I Flashed Twrp, Twrp works fine, just nothing else. Even flashed a rom and have no boot just twrp.
TIA

joe2k01 said:
Team Win Recovery Project 3.x
Click to expand...
Click to collapse
you ****ing young hacker. you need to make reference to the authors , when you take other people's files...

jemmini said:
you ****ing young hacker. you need to make reference to the authors , when you take other people's files...
Click to expand...
Click to collapse
WTF is wrong with you man? You are in the credits list on GitHub. I took only your kernel since you are anti-opensource and don't want to explain how you built it.

bastard81 said:
I tried, but even this system seems to not work. The phone will restart, and for a moment I see the display flashing. After it starts immediately with the system but without going into recovery ...
I do not know what else to try .. From the developer options have also enabled the oem unlock. Also tried without. Reinstalled 3 times with spflashtool and everything works perfectly. But the recovery just does not want to work.
Ps thanks for your support
Click to expand...
Click to collapse
The same for me

Im on stock v3.02_20161121 odex from silent27 had TWRP 3.02 and just flashed TWRP 3.1.1 super img. over and it worked just fine.
On top of that flashed a twrp theme(310x v.2 hdpi light play theme by z31s1g) wich on TWRP 3.02 themes didnt worked for me.

[Recovery] [Unofficial] [MI 8] TWRP 3.3.1-1031

I'm not the Author, the author is wzsx150 from LR.TEAM
WZSX’s TWRP is well-known as the Chinese version of TWRP due to the language default is in Chinese. However, you can switch to English within TWRP user settings it's easily. switched. You can follow the instructions on this link to change the language to English: https://miui.blog/any-devices/lr-tea...inese-english/
Xiaomi 8's LR.Team customized version of Twrp
Automatically decrypts data, Includes root functionality, clear the power-on password, multi-function restart.
Disclaimer: I have installed it and for me it works fine. However, it is not guaranteed to work for you especially if you currently have encryption. Use at your own risk
If you need help flashing TWRP : Follow instructions here: https://miui.blog/mi-8/flash-twrp-root-mi-8/
Downloads
Latest
Version for Miui 11 Android 10/Q : https://www.androidfilehost.com/?fid...26312261636230
MD5: 2f5f2e7dc8f32b5a999828c9370b7de2
Version for Miui 10 or 11 Android 9/P : https://www.androidfilehost.com/?fid...26312261636232
MD5: 4681f9bd6367f934218da71fd528e39b
Old Versions
TWRP-3.2.3.1-FireDance-Edition (English) ( img)
TWRP 3.2.3-1208 (English) ( zip - img )
TWRP 3.2.3-1110 (English) ( zip - img )
TWRP 3.2.3-1110 ( zip - fastboot - img )
TWRP 3.2.3-0918 (zip - fastboot - img)
TWRP 3.2.3-0908 (zip - fastboot - img)
TWRP 3.2.2-0703 (zip - fastboot - img)
TWRP 3.2.2-0611 (zip - fastboot - img)
TWRP 3.2.2-0609 (zip - fastboot - img)
Changelog (Google Translated)
2018.11.10 update Contents:
1. Update the new rom that supports the official Android 9.
2. Update and optimize some functions
3. Increase the option to restart after the automatic upgrade is completed. In the twrp setting, the default is automatic restart. Uncheck the box and you can not restart. After the automatic upgrade, some operations are performed to prevent twrp from being overwritten, etc.
4. Update the built-in root to magisk 17.1, and fix the problem that the module cannot be brushed. Other features are also updated and optimized
5. After the new version of the system root, restarting the system requires manual installation of the magisk app, the official system problem, this can only be so
. 6. If Kami may need the root system or remove the dm check operation.
7. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc.
2018.9.8 update:
1. Support the official Android 9.0 system, including automatic decryption data
2. About data decryption, this may not be particularly stable now, sometimes need to reboot into the system and then restart Twrp can be decrypted.
If the new version of twrp is not supported, you can try to use the old version of
2018.8.6 update:
1. Update twrp 3.2.3 source code
2. Built-in magisk16.7, temporarily build this version first
3. Optimize data decryption problem, fix some problems
4 Support the new version of miui10 data decryption
5. Decrypt the plaintext display input password, easy to check whether the password input is correct
6. Update to try to repair the decryption data scheme, set the lock screen password to the machine, enter twrp need to enter the lock screen Password, otherwise you cannot temporarily decrypt data.
7. After brushing in twrp, the first time you enter twrp may restart once. This is normal. If you restart repeatedly, or you can't decrypt data, please give me feedback on Weibo.
8. Regarding data decryption, this may not be particularly stable now. Sometimes you need to reboot into the system and restart into twrp to decrypt.
If the new version of twrp is not supported, you can try to use the old version of

Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job

arifqur said:
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
Click to expand...
Click to collapse
@gulp79 is to thank for the English version

mikefallen said:
@gulp79 is to thank for the English version
Click to expand...
Click to collapse
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg

gulp79 said:
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/fm/M4oDgLxA
Click to expand...
Click to collapse
that link doesn't seem to work for me, just redirects to the home page of mega

mikefallen said:
that link doesn't seem to work for me, just redirects to the home page of mega
Click to expand...
Click to collapse
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg

gulp79 said:
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
Click to expand...
Click to collapse
yup added to OP Thanks!

Help!!!
It works for mi 8 miui 10.0.3.0 global?, i cant figure out how install the eu rom, in the twrp show me only folders encrypted :C, somebody knows how ?

Looks like you will have to format Dara partition in recovery by typing yes

So, boot the img and then flash the zip for TWRP to stick permanently?

Can't use gapps Aroma installer using twrp .. any ideas ?

could this twrp support amora installer
could this twrp support amora installer?

On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!

cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
in twrp go to file manager, data, system and delete locksettings file. reboot and you're good to go again

Hi!
Help me, please!
I can't exit from recovery mode on MI8

cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
Go into recovery mode, format internal memory.
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
Coolesha said:
Hi!
Help me, please!
I can't exit from recovery mode on MI8
Click to expand...
Click to collapse
You need to format your device.

bahuy2003 said:
Go into recovery mode, format internal memory.
Click to expand...
Click to collapse
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!

cyaneo said:
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
Click to expand...
Click to collapse
If you device can't reboot, you can flash eu or global rom, format again and reboot system.

bahuy2003 said:
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
Click to expand...
Click to collapse
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.

cyaneo said:
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
Click to expand...
Click to collapse
Flash this zip in TWRP and your login password would be deleted, which by the way gets jumbled up after a restore.

[RECOVERY] [UNOFFICIAL] LR.Team TWRP 3.3.1-1119 for onclite by wzsx150

Disclaimer:
HTML:
/* Your warranty is now void! I'm not responsible for bricked devices, dead SD cards or anything else that may occur to you and / or your device.
* Do it at your own risk!
This recovery was not made by me, i'm just sharing it in easier ways to download. The guy behind this is wzsx150, thank him for it.
After a lot of pain researching and trying to download from Baidu servers i finally managed to get this custom TWRP to get rid of force encryption on stock MIUI because this recovery can successfully decrypt with no need to do a format data.
Just installed magisk v20.2 on stock MIUI global 11.0.4 and it works. :good:
Info
- Based on TWRP 3.3.1
- Build date: 2019.11.19
- Model: Redmi 7, Red Rice 7
- Developer: wzsx150 (profile)
Install Instructions
Warning: unlocked bootloader needed!
Fastboot
1. Download IMG file below
2. Rename file to recovery.img and put it into your adb path (if you don't have adb check this link)
3. Reboot your device into fastboot mode by holding down vol - and power button while device is off and connect to PC
4. Open cmd in your adb path and run the following command: fastboot flash recovery recovery.img
5. Run fastboot reboot, and hold down vol + key until device enters into twrp
Custom Recovery
1. Download ZIP file below to internal storage
2. Reboot to recovery
3. Install zip
4. Reboot to recovery
Downloads
IMG: https://drive.google.com/uc?id=16zXoYeviDUeV9zsSeDjyi_P8NnQkJhLr&export=download
ZIP: https://drive.google.com/uc?id=1ZF4C5-B9rlHKJVO0GbtS_ZjT5VlX1taH&export=download
Special Thanks
- TeamWin for building TWRP for a lot of devices, including this one
- wzsx150 and LR.Team for making this mod
- Firmwarex.net for providing a free Baidu account to download from their servers
Source: https://www.weibo.com/6033736159/IgY1Ex98h?from=page_1005056033736159_profile&wvr=6&mod=weibotime

Works backups AND restore opción?

mcf7 said:
Disclaimer:
/* Your warranty is now void! I'm not responsible for bricked devices, dead SD cards or anything else that may occur to you and / or your device.* Do it at your own risk!
This recovery was not made by me, i'm just sharing it in easier ways to download. The guy behind this is wzsx150, thank him for it.
After a lot of pain researching and trying to download from Baidu servers i finally managed to get this custom TWRP to get rid of force encryption on stock MIUI because this recovery can successfully decrypt with no need to do a format data.
Just installed magisk v20.2 on stock MIUI global 11.0.4 and it works. :good:
Info
- Based on TWRP 3.3.1
- Build date: 2019.11.19
- Model: Redmi 7, Red Rice 7
- Developer: wzsx150 (profile)
Install Instructions
Warning: unlocked bootloader needed!
Fastboot
1. Download IMG file below
2. Rename file to recovery.img and put it into your adb path (if you don't have adb check this link)
3. Reboot your device into fastboot mode by holding down vol - and power button while device is off and connect to PC
4. Open cmd in your adb path and run the following command: fastboot flash recovery recovery.img
5. Run fastboot reboot, and hold down vol + key until device enters into twrp
Custom Recovery
1. Download ZIP file below to internal storage
2. Reboot to recovery
3. Install zip
4. Reboot to recovery
Downloads
IMG: https://drive.google.com/uc?id=16zXoYeviDUeV9zsSeDjyi_P8NnQkJhLr&export=download
ZIP: https://drive.google.com/uc?id=1ZF4C5-B9rlHKJVO0GbtS_ZjT5VlX1taH&export=download
Special Thanks
- TeamWin for building TWRP for a lot of devices, including this one
- wzsx150 and LR.Team for making this mod
- Firmwarex.net for providing a free Baidu account to download from their servers
Source: https://www.weibo.com/6033736159/IgY1Ex98h?from=page_1005056033736159_profile&wvr=6&mod=weibotime
Click to expand...
Click to collapse
Thanks a lot ? so this should work to install any custom rom? Like the pixel experience one?
Sent from my Xiaomi Redmi 7 using XDA Labs

Jojethegamerpro said:
Works backups AND restore opción?
Click to expand...
Click to collapse
I haven't tested but it should work

SammyInTheCity said:
Thanks a lot ? so this should work to install any custom rom? Like the pixel experience one?
Click to expand...
Click to collapse
If you're planning to install a custom rom, any custom recovery should work, including this one.
The main advantage of using this recovery is that you can bypass the stock rom (maybe stock based roms too) force encryption to access your partitions on recovery.

mcf7 said:
If you're planning to install a custom rom, any custom recovery should work, including this one.
The main advantage of using this recovery is that you can bypass the stock rom (maybe stock based roms too) force encryption to access your partitions on recovery.
Click to expand...
Click to collapse
Okay thanks, I have my bootloader locked at the moment, but when I finally am able to unlock it I'll definitely use this
Sent from my Xiaomi Redmi 7 using XDA Labs

Thank you for sharing

Ask password for decryption
But my phone isn't encrypted
Tried my lock screen password it didn't work
Tried to remove all passwords but still asks for password

hamedhd said:
Ask password for decryption
But my phone isn't encrypted
Tried my lock screen password it didn't work
Tried to remove all passwords but still asks for password
Click to expand...
Click to collapse
Which recovery did you used before this? And what's your rom?
For the first time i used LR.Team's recovery i installed recovery, did a format data(due to the password issue as you), installed miui global and magisk and the system booted properly and after that recovery didn't asked for password anymore and i've been able to mount partitions and do other stuff.

I can't flash gapps using this twrp, fix it please

Me_Only said:
I can't flash gapps using this twrp, fix it please
Click to expand...
Click to collapse
I'm not the dev behind this project, i'm just sharing wzsx150's work in an easier way to download. You can contact him on the source link at the bottom of OP.
I only tested this twrp with stock rom which doesn't need gapps and encountered no issues.

mcf7 said:
I'm not the dev behind this project, i'm just sharing wzsx150's work in an easier way to download. You can contact him on the source link at the bottom of OP.
I only tested this twrp with stock rom which doesn't need gapps and encountered no issues.
Click to expand...
Click to collapse
same here but the custom roms that doesn't include gapps sucks, that's the problem with this twrp it cant flash gapps, thanks for the response bro.

[CLOSED][RECOVERY] ORANGEFOX R11.0 for OnePlus 5 & 5T (Unofficial, Official soon)

OrangeFox Recovery
Replace TWRP with OrangeFox once and you won't go back
Last update: 22 November 2020. Build 2
Changelog:
- Updated Magisk to 21.1 (now clicking install magisk after rom installation will install magisk 21.1)
- Update Magisk uninstaller to latest build
- fixed a bug where some people couldn't use flashlight option inside recovery
- fastened things up for faster installations and backup
- minor bug fixes
Contents:
Overview
Why OrangeFox?
Features
Screenshots
Links
Installation procedure
OVERVIEW:
Probably the most beautiful recovery out there.
Synced with the latest Teamwin changes.
Designed with latest Material design 2 guidelines.
Included customization.
Inbuilt patches, like Magisk and password reset patch.
Password protection.
Fully open-source.
Frequently updated.
Why OrangeFox?
OrangeFox has been operating for over two years. In that time OrangeFox have improved the quality, stability, and device support of the recovery. Today OrangeFox is the leader in stability, UI design, and UX. Installing OrangeFox means being with the latest code and fastest fixes.
:good: Treble & Non-Treble Support
:good: No compatibility.zip error while flashing OxygenOS
:good: A lot of customisations
:good: Extremely beautiful UI ready to please your eyes.
:good: Dev team is always ready to fix your problems
:good: F2FS support
There were previously 10.1 builds for these devices for these devices and this is how current build is different from them:
New, more modern UI.
Fixed F2FS support
Upstreamed to R11
and many more...
Note: Official soon I've applied for it.
Screenshots
Screenshots at https://imgur.com/a/Ai8KWX9 and on Sourceforge
Links:
Support group: https://t.me/orangefoxop5t
Download: https://github.com/Maitreya29/OrangeFox-OnePlus-5-T/releases
Installation procedure:
There are two methods to install OrangeFox
A) Via a recovery (for those with TWRP installed):
1. To install an OrangeFox zip, flash it with OrangeFox (or any TWRP-compatible custom recovery) without any wipes.
2. Do the same thing if you want to upgrade OrangeFox
3. When you flash an OrangeFox zip, there is no need to flash any DFE or any other such thing
4.To install an OrangeFox img file, boot into fastboot mode, and run the command: fastboot flash recovery OrangeFox-xyz.img
B) Via Fastboot (For those without a recovery):
You need a PC for this. If you do not have a PC, or access to a PC, then you are stuck!
1. Unlock your bootloader (if not already unlocked)
2. Install adb, fastboot and the relevant USB drivers onto your PCs)
3. Download the correct OrangeFox zip file to your phone, and to your PC
4. Extract recovery.img from the OrangeFox zip file, and copy recovery.img to your PC’s adb directory
5. Reboot your phone into fastboot/bootloader mode
6. Open up a command line window / terminal emulator on your PC
7. Change to the adb directory on your PC
8. Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
9. Reboot into OrangeFox by pressing the power + volume down keys, until you see the OrangeFox splash screen
11. After OrangeFox has booted up, check that everything is working – eg, that it has mounted the data partition successfully, and that the touchscreen works.
12. Find and select the OrangeFox zip on your phone, tap on it, and swipe to install it (because OrangeFox Recovery needs some files from the zip)
After installation, the phone will automatically reboot into OrangeFox
Enjoy!

Thank you, I just installed it, I have everything set and customized! Not yet tested all the options but it's beautiful! Congratulations...

@Maitreya29 Since this supports both the 5 & 5T, would you like this thread to be moved to the 5 & 5T Cross Device Development forum? We can then close the same thread you created in the 5T forum since there won't be a need for it.

shadowstep said:
@Maitreya29 Since this supports both the 5 & 5T, would you like this thread to be moved to the 5 & 5T Cross Device Development forum? We can then close the same thread you created in the 5T forum since there won't be a need for it.
Click to expand...
Click to collapse
Hi there, thanks. Actually the download links for both the posts is different and I feel like I'd be able to give better support since I'd know which device is getting the error as both the 5 & 5T builds are different.

Maitreya29 said:
Hi there, thanks. Actually the download links for both the posts is different and I feel like I'd be able to give better support since I'd know which device is getting the error as both the 5 & 5T builds are different.
Click to expand...
Click to collapse
Alright, thanks.
Added to the OnePlus 5 Index Thread here.

shadowstep said:
Alright, thanks.
Added to the OnePlus 5 Index Thread here.
Click to expand...
Click to collapse
Thankn you, appreciate it

''IT DOESN'T DOWNLOAD IT JUST REFRESHES AFTER 5 SECONDS/DIRECT DOWNLOAD''. can you please look in to it thank you.

Sparda333 said:
''IT DOESN'T DOWNLOAD IT JUST REFRESHES AFTER 5 SECONDS/DIRECT DOWNLOAD''. can you please look in to it thank you.
Click to expand...
Click to collapse
It works fine for me, you must be having problems downloading. I don't host the download. Sourceforge does. However join the support group I'll share links.

Download links updated

I didn't have any issues downloading or installing... Are is fine now with my op5.

Awesome! Thank you

Finally ?

It seems working very nicely. Many thanks!

This version of OrangeFox cannot decrypt my Android R partition.
I just completed a clean wipe and fresh install of crDroid's R-based builds. I have a 7-digit PIN set for unlock. I am confident the PIN is correct, because it unlocks my phone. I have device encryption enabled. The known-good PIN is not accepted by OrangeFox to decrypt.

Thracks said:
This version of OrangeFox cannot decrypt my Android R partition.
I just completed a clean wipe and fresh install of crDroid's R-based builds. I have a 7-digit PIN set for unlock. I am confident the PIN is correct, because it unlocks my phone. I have device encryption enabled. The known-good PIN is not accepted by OrangeFox to decrypt.
Click to expand...
Click to collapse
Any recovery on android 11 can not decypt data with pin enabled. You need to set pattern for that.

Thracks said:
This version of OrangeFox cannot decrypt my Android R partition.
I just completed a clean wipe and fresh install of crDroid's R-based builds. I have a 7-digit PIN set for unlock. I am confident the PIN is correct, because it unlocks my phone. I have device encryption enabled. The known-good PIN is not accepted by OrangeFox to decrypt.
Click to expand...
Click to collapse
That's android 11 problem, A11 doesn't let recoveries decrypt with pin. Only patterns work.

This Recovery can decrypt the Data with Pattern in Android 11 ?

Thread closed on request of OP @Maitreya29 as the OP doesn't anylonger owns the device and is unable to support. However, thanks very much for your highly appreciated contributions.
Regards
Oswald Boelcke

Development [RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project

Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Hello, this is TWRP, for Oneplus 9/Pro
Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now
Send me a beer: Crypto(Preferred) | PayPal
huge thanks to @osm0sis for help in making and testing this recovery
Trees:
https://github.com/TeamWin/android_device_oneplus_lemonadep
https://github.com/TeamWin/android_device_oneplus_sm8350-common
Telegram group: https://t.me/NSSFB
Download: https://twrp.me/oneplus/oneplus9pro.html

Great, will test later on EU.

Thanks for your work, much appreciated

avid_droid said:
So I'm assuming flashing kernel and magisk is done through advanced and flash .img also?
Click to expand...
Click to collapse
No, the normal way

Thank you very much.... Finally

When in recovery, I plugged my phone in and my computer doesn't see it. My computer recognizes my phone, but it doesn't show up in my File Explorer. Also, can we flash system image files?

avid_droid said:
Sorry. Meant for magisk. I don't see a flash able zip for that. The kernel is obvious
Click to expand...
Click to collapse
The magisk apk itself is a flashable zip

Red Prez16 said:
When in recovery, I plugged my phone in and my computer doesn't see it. My computer recognizes my phone, but it doesn't show up in my File Explorer.
Click to expand...
Click to collapse
Did you enter your password to decrypt when recovery booted?, if you did, check mount > enable mtp

Nebrassy said:
Did you enter your password to decrypt when recovery booted?, if you did, check mount > enable mtp
Click to expand...
Click to collapse
Ah, okay. Thank you. Also, how do I flash a system image file? Let's say HavocOS for example.

avid_droid said:
Just got the zip from here
Click to expand...
Click to collapse
Do not download from unofficial sites, they could be malicious, only download from
Releases · topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com

Red Prez16 said:
Ah, okay. Thank you. Also, how do I flash a system image file? Let's say HavocOS for example.
Click to expand...
Click to collapse
Wait for them to release a zip

Nebrassy said:
Wait for them to release a zip
Click to expand...
Click to collapse
Ah, okay.

Red Prez16 said:
When in recovery, I plugged my phone in and my computer doesn't see it. My computer recognizes my phone, but it doesn't show up in my File Explorer. Also, can we flash system image files?
Click to expand...
Click to collapse
Pretty sure you need to mount storage for that in the mount menu

@Nebrassy I'm getting a multi-coloured white noise image when booting from fastboot (Step 1 in installation)
Currently I have LOS recovery due to installing current version of crDroid, should it be a different process for us? I was also on OOS 11.2.6.6 beforehand as 11.2.7.7 isn't out for EU (LE2123) yet.
i.e. fastboot flash boot TWRP-3.5.1-lemonadep-Nebrassy.img
(Kind of wary of doing so due to the white noise image but that's how LOS recovery was applied for crDroid instructions)
(Also was it you getting N7 BADA to search testers?)

djsubterrain said:
Pretty sure you need to mount storage for that in the mount menu
Click to expand...
Click to collapse
I did and nothing still.

djsubterrain said:
@Nebrassy I'm getting a multi-coloured white noise image when booting from fastboot (Step 1 in installation)
Currently I have LOS recovery due to installing current version of crDroid, should it be a different process for us? I was also on OOS 11.2.6.6 beforehand as 11.2.7.7 isn't out for EU (LE2123) yet.
i.e. fastboot flash boot TWRP-3.5.1-lemonadep-Nebrassy.img
(Kind of wary of doing so due to the white noise image but that's how LOS recovery was applied for crDroid instructions)
(Also was it you getting N7 BADA to search testers?)
Click to expand...
Click to collapse
The noise thing happens only on some devices, only Oneplus devices and I still have no idea what the cause could be, it seems to go away when twrp is flashed
And no, never flash twrp to boot that way, only fastboot boot and let twrp install itself with the options given
And yes, that was me

avid_droid said:
Well ill be damned... Magisk is a flashable apk. everything went through perfectly. Thank you. TWRP now installed with root and everything working so far. Appreciate you.
Click to expand...
Click to collapse
hi, are you on latest oos 11.77?

avid_droid said:
No I'm on BA 11.2.6.6
Click to expand...
Click to collapse
oh I see, gotta try later. thanks

There is no white noise in test build TWRP-3.5.1-lemonadep-1623916477.img
However, cannot pass through it in new build.

Nebrassy said:
The noise thing happens only on some devices, only Oneplus devices and I still have no idea what the cause could be, it seems to go away when twrp is flashed
And no, never flash twrp to boot that way, only fastboot boot and let twrp install itself with the options given
And yes, that was me
Click to expand...
Click to collapse
Would I be able to flash TWRP with LOS in that case?