Related
OK, I did search and found nothing. So, I need to ask this somewhere, hopefully this is the place. The similar threads search did not seem to help much.
I have a Tab S 8.4 WiFi. I rooted it and was running Cyanogen 12. I noticed the TWRP 2.8.3.0 update, so I went to install it. TWRP manager kept crashing, so I went to the TWRP site and downloaded the SM-T 700 klimti wifi img file. I used Flashify to flash this, as I have done numerous times. I wish I'd extracted and flashed the zip in TWRP, but I did not. Everything acted normal but when the tab went to boot up it got to the Black screen that announces Samsung Galaxy S, SM-T700, Powered by android. This was it. It flashed this screen constantly every second or so. Non stop. There was nothing any button combination would do. Except it will go into download mode. Nothing else. No hard reset, nothing. Download mode is it. I spent lots of time looking at various tutorials to see what I'd missed, nothing but download mode. So, I had Odin on the computer and the latest firmware from SamMobile, so I figured I could start over and get the tablet functioning. I've used Odin a fair amount before, including the original Galaxy, S III, S4, so I'm not unfamiliar with the process. I've yet (until now) had the privilege of having a wreck like this one.
So, Odin acts like it is doing its thing, runs through all the steps, says at the end Pass and all threads succeeded, none failed. At the end of the Odin process the tablet acts like it is booting. Up comes the Samsung name with the Bluish sparkly oval along with the standard Samsung tones we hear heading into the boot. That is as far as it goes. The blue and pink colors fade out and I am left with a black screen with SAMSUNG in the middle. Again, no button combination except download mode works at all. It just stays there. Pass showing proudly on the Odin screen (EDIT: I left it there for an hour or so to see if boot would finish before disconnection). I downloaded and tried flashing all of the various firmwares, same result. I even let the battery drain to zero hoping that would shut it off. It seemed to, but the results were the same, only the download mode combination will do anything. The power button starts up the phone in an initially normal manner, but it goes right to SAMSUNG in a black screen.
EDIT 2: I used the Cellular South firmware, saw nothing else US and thought I remembered reading this was what worked here.
There is likely user error here (and realize I might kick myself in the end...Oh wait, I already have), but I've run in circles enough to realize I'm probably doing the same sequence with the same error and I not able to see what it is.
Does anyone have any idea what is wrong or how to fix this? I hope it is fixable. I had hope since download and Odin at least go through the motions. I would greatly appreciate any advice, suggestions, or help. Thanks in advance.
Since you installed cm12 my guess is that its trying to switch back to davlik runtime. Have you tryed flashing twrp, then transfer another rom/custom rom too it and flash it with twrp?
DUHAsianSKILLZ said:
Since you installed cm12 my guess is that its trying to switch back to davlik runtime. Have you tryed flashing twrp, then transfer another rom/custom rom too it and flash it with twrp?
Click to expand...
Click to collapse
I did wonder about conflicts, including dalvik vs art. But I have a tab I can't do anything with except go to download. Since I tried stock firmware flashes, I imagine root is toast and so is flashing another TWRP, assuming I can do that with Odin. Never tried zip files with Odin. So short answer is no I have not tried flashing TWRP over Odin (which is now my only option). I also wondered if I was stuck with this paperweight until Samsung gets Lollipop to the Tab S, when I can get a stock 5.0 firmware from SamMobile, or someplace.
At any rate thank you.
SteveC485 said:
I did wonder about conflicts, including dalvik vs art. But I have a tab I can't do anything with except go to download. Since I tried stock firmware flashes, I imagine root is toast and so is flashing another TWRP, assuming I can do that with Odin. Never tried zip files with Odin. So short answer is no I have not tried flashing TWRP over Odin (which is now my only option). I also wondered if I was stuck with this paperweight until Samsung gets Lollipop to the Tab S, when I can get a stock 5.0 firmware from SamMobile, or someplace.
At any rate thank you.
Click to expand...
Click to collapse
What I mean is to flash twrp with odin then flash zips with twrp. If you cant reboot into recovery, if you installed adb then yoi can do adb reboot recovery.
I`m having same issues. I was on stock rooted ROM and flashed latest TWRP from the app. Now I`m stuck in bootloop.
EDIT: flashed TWRP 2.8.1.0 via Odin and everything works fine now.
senel said:
I`m having same issues. I was on stock rooted ROM and flashed latest TWRP from the app. Now I`m stuck in bootloop.
EDIT: flashed TWRP 2.8.1.0 via Odin and everything works fine now.
Click to expand...
Click to collapse
Thanks. When Christmas stuff winds down, I will give Odin a go. Thanks to both of you who answered. Merry Christmas.
OK, Odin says the TWRP is successful, goes through all motions, up to and including PASS. The tablet still will only go into Download Mode. At this point I'm wondering about trying Kies. Also thought what might happen if I unchecked Auto reboot in Odin and tried that again.
SteveC485 said:
OK, Odin says the TWRP is successful, goes through all motions, up to and including PASS. The tablet still will only go into Download Mode. At this point I'm wondering about trying Kies. Also thought what might happen if I unchecked Auto reboot in Odin and tried that again.
Click to expand...
Click to collapse
? You can boot into twrp? It should be power, home, vol up buttons. And to force reboot its power, home and vol up and down buttons at the same time.
DUHAsianSKILLZ said:
? You can boot into twrp? It should be power, home, vol up buttons. And to force reboot its power, home and vol up and down buttons at the same time.
Click to expand...
Click to collapse
No, the power, home, volume up does nothing, I even held it there for maybe 15 minutes. The power, home, and volume up/down gets the download screen, or rather it gets the warning screen about the dangers of flashing a custom OS. Continue goes into download and reboot get me the same old attempt to reboot then stuck on Samsung screen. That last is the ONLY button combination I can get to work.
I'll let the thing use up the battery and shut itself off and try the manual reboot to recovery again. I've chased this thing around so much I'm likely in a boot loop myself and can't see my error.
SteveC485 said:
No, the power, home, volume up does nothing, I even held it there for maybe 15 minutes. The power, home, and volume up/down gets the download screen, or rather it gets the warning screen about the dangers of flashing a custom OS. Continue goes into download and reboot get me the same old attempt to reboot then stuck on Samsung screen. That last is the ONLY button combination I can get to work.
I'll let the thing use up the battery and shut itself off and try the manual reboot to recovery again. I've chased this thing around so much I'm likely in a boot loop myself and can't see my error.
Click to expand...
Click to collapse
Hmm did you use the latest twrp? Ive alwayed use twrp 2.7. 1,1 Something. Never had problems in that version.
DUHAsianSKILLZ said:
Hmm did you use the latest twrp? Ive alwayed use twrp 2.7. 1,1 Something. Never had problems in that version.
Click to expand...
Click to collapse
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
SteveC485 said:
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
Click to expand...
Click to collapse
nope. Odin only flashes tars and files with md5 or a few otheres. You flash zips with twrp.
DUHAsianSKILLZ said:
nope. Odin only flashes tars and files with md5 or a few otheres. You flash zips with twrp.
Click to expand...
Click to collapse
Thanks, that's what I thought.
For whatever reason, this time the power, home, and volume up combination booted me into TWRP. Restored a backup and everything is up and running normally (at least so far).
I'm perfectly willing to admit error,but don't quite know where my error came in. I would swear I used the power, volume up, and home combination when I hit the download mode. But maybe not. I don't know why it worked now, except that I was inadvertently hitting the wrong combination, thinking I was doing it right. I remember thinking the first time it went to download mode, that I just did it wrong and used the wrong volume key. Thought I was more careful the succeeding tries.
At any rate thanks for the help. I will remember this particular lesson for a while .
hard brick
My sm-t700 hard brick with the last twrp... I don't know if it is the twrp but it's hard brick when I do a restore with twrp...now it is just dead... no power.. no nothing lol... j'ai été le échanger. . Vive future shop.. mais la j'ai peur de recommencer mon root et etc...
faztecnyk said:
My sm-t700 hard brick with the last twrp... I don't know if it is the twrp but it's hard brick when I do a restore with twrp...now it is just dead... no power.. no nothing lol... j'ai été le échanger. . Vive future shop.. mais la j'ai peur de recommencer mon root et etc...
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2838473
DUHAsianSKILLZ said:
Try this http://forum.xda-developers.com/showthread.php?t=2838473
Click to expand...
Click to collapse
Thanks.. but I said hard brick and not soft brick..
SteveC485 said:
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
Click to expand...
Click to collapse
A lot of Tab S owners have had issue with TWRP 2.8.3. There is another thread on it. I installed 2.8.3 with Odin and it was pretty wonky. Went right back to 2.8.1.
If none of the methods worked for anyone try this. If your tablet keeps trying to boot into twrp or stuck at the galaxy tab s screen try this if you cant boot into download mode.
Let completely die. Then put it in the charger and quickly press the combination of buttons to get into download mode. That should over ride booting into twrp. another way is to plug it into your computer and try different combinations of buttons.
I have the samsung galaxy tab s 8.4 and I rooted it a few days ago and I thought to myself lets install a custom recovery, but before I did that I backed up my stock kernal and my stock recovery through flashify, also im on stock firmware, after I backed those things up I installed twrp 2.8.3.0 and I booted into recovery to back up my rom and data just in case I soft bricked my tablet like I used to do on my nexus 7, when trying to boot into twrp it went in to boot loop I have tried all button combination I know and have seen in this thread but none works except for going into download mode. I dont know if I should flash an older version of twrp and see if it works or should I install stock firmware on my device and im not sure what version of odin I should use if I flash a older version of twrp. The version I used to root my tablet is 3.07 of odin.
I want to ask that it hasn't any solutions yet??
I have flash Genisys Rom 2.6.zip than reboot that have a bootloop problem....
Will it be a solutions then?
Any idea??
Have you flashed v20a bootloader and modem images?
mirko93s said:
Have you flashed v20a bootloader and modem images?
Click to expand...
Click to collapse
Yes I flash it back those v20a bootloader, boot and modem after I got into the twrp, then I reboot it, it is stuck on the LG logo screen now...
and now I can't go back to the fastboot mode and the twrp...that 's the problem...
any idea to go back the twrp?
i'm stuck on same thing.
What I've tried.
! flashing back to stock rom using lg flash tool. Crashes at 9%. Tried flashing 20A file not allowed
both adb and fastboot methods don't work as adb doesn't detect phone and fastboot get's stuck on waiting on device
Basically the phone is stuck on boot logo after upgrading to marshmallow which all went fine and phone booted as normal after I then reinstalled the twrp recovery as before so to install supersu after boot that when the problem started. The phone can get into factory reset the two yes methods which I have tried still no luck and I can also get into download mode. basically am I waiting on a update to lg flash tool or have I ducked my phone any help would be appreciated
You probably ****ed the security flag added into marshmallow and it didn't like it one bit,that's why its better the flash newer versions of a rom when you have a recovery then an official ota ,that's where they get ya locked down .is there any devices in the device manager at all? Just checking if its hard bricked.if its labeled as q9xxxx something like that then its definitely hard bricked.like not even a jtag can get er back
imsopickled said:
i'm stuck on same thing.
What I've tried.
! flashing back to stock rom using lg flash tool. Crashes at 9%. Tried flashing 20A file not allowed
both adb and fastboot methods don't work as adb doesn't detect phone and fastboot get's stuck on waiting on device
Basically the phone is stuck on boot logo after upgrading to marshmallow which all went fine and phone booted as normal after I then reinstalled the twrp recovery as before so to install supersu after boot that when the problem started. The phone can get into factory reset the two yes methods which I have tried still no luck and I can also get into download mode. basically am I waiting on a update to lg flash tool or have I ducked my phone any help would be appreciated
Click to expand...
Click to collapse
Yes brother!!! The same thing as you experience.... just like the thread (LG G4 bootloop.... Need expert help... Ready to pay the price)
but there are still nothing method? So just wait for the update to lg flash tool and the fully TOT files??
O MY GOD...I've been fooled trick this time...
mr turtle droid said:
You probably ****ed the security flag added into marshmallow and it didn't like it one bit,that's why its better the flash newer versions of a rom when you have a recovery then an official ota ,that's where they get ya locked down .is there any devices in the device manager at all? Just checking if its hard bricked.if its labeled as q9xxxx something like that then its definitely hard bricked.like not even a jtag can get er back
Click to expand...
Click to collapse
No its listed as two different devices as LGE andriodnet serial port com4 and also LGE andriodnet usb modem. I have noticed that if i uninstall these two from within device manager that it then goes back to an lgmobile phone with a i on the phone icon in device manager. I have tried to find the proper driver so to make the computer see the lg phone again without error via extracting driver install exe but no joy it goes back to the above.
I wonder Is it possible to flash the .img files that are boot. system etc using lg flash tool the one with the tot methid via a script and the files I wonder. Or even convert the files needed to do a complete flash of system bootloader etc to bin files so to be read by the lg flash tool used in the tot version. or is there any other software that can convert kdz to bin.
imsopickled said:
No its listed as two different devices as LGE andriodnet serial port com4 and also LGE andriodnet usb modem. I have noticed that if i uninstall these two from within device manager that it then goes back to an lgmobile phone with a i on the phone icon in device manager. I have tried to find the proper driver so to make the computer see the lg phone again without error via extracting driver install exe but no joy it goes back to the above.
I wonder Is it possible to flash the .img files that are boot. system etc using lg flash tool the one with the tot methid via a script and the files I wonder. Or even convert the files needed to do a complete flash of system bootloader etc to bin files so to be read by the lg flash tool used in the tot version. or is there any other software that can convert kdz to bin.
Click to expand...
Click to collapse
I think this is impossible to flash the .img files that are boot. Because we cannot to go into the fastboot mode.
bardochu said:
I think this is impossible to flash the .img files that are boot. Because we cannot to go into the fastboot mode.
Click to expand...
Click to collapse
not even through adb shell????????
---------- Post added at 02:03 PM ---------- Previous post was at 02:02 PM ----------
and what you guys are experienceing is the rollback protection from lg in their boot-loaders...not sure how to get past it but i saw a thread on here to get past it
I too, like many others, am stuck in a boot loop, able to access download mode, but not recovery, i have an unlocked bootloader, but cannot get into fastboot or use adb commands.
robg2102 said:
I too, like many others, am stuck in a boot loop, able to access download mode, but not recovery, i have an unlocked bootloader, but cannot get into fastboot or use adb commands.
Click to expand...
Click to collapse
:highfive:In the same boat, XDA's brother TheBledard Who has a same trouble in the bootloop. He said that you can use the octopus box to unbrick.
But it seem a little bit expensive....:cyclops:
Same
I had the same problem. They recently reposted the download to a fixed 2.6 so try to redownload from the genesys post. Also, flash the marshmallow kernel and supersu right after, then followed by genesys theme if you choose to use.
Retry and retry to start twrp at boot with sleep button and volume down button.... I had the same problem with marshmallow because i forgot to flash v20a bootloader, and i had finally access to twrp after a lot of times...
bardochu said:
:highfive:In the same boat, XDA's brother TheBledard Who has a same trouble in the bootloop. He said that you can use the octopus box to unbrick.
But it seem a little bit expensive....:cyclops:
Click to expand...
Click to collapse
almost 200 dollar yes
Hi, i just recently bought a used zenfone 2. It has a really old version of lollipop android (2.13 version) and i want to upgrate to 6.0 android. Problem is i can't get into recovery mode. Everytime i download the update phone restarts, but instead of seeing recovery screen i see usb sign. The phone turns off after a while and tries again-but same usb screen. Getting into it manually i get the same usb screen. What to do? All i can guess that the phone was tried to be rooted and failed, as i found SU program.(Phone itself boots up normally as i should!)
I'm still new to these things, so please keep it as simple as possible and ask anything more you need to know.
here are two things if you think BL is already unlocked download latest TWRP and flash that. if you think BL is locked download recovery image for the same version you are currently on and flash via fastboot
sukhwant717 said:
here are two things if you think BL is already unlocked download latest TWRP and flash that. if you think BL is locked download recovery image for the same version you are currently on and flash via fastboot
Click to expand...
Click to collapse
Well that's the thing, i can't do both ways, cause holding power+volume up buttons i instantly get a usb screen. If I could enter it i wouldn't have any problems. Bootloader is locked, when i start up my phone the asus splash screen is black, not white.
IchiBan360 said:
Well that's the thing, i can't do both ways, cause holding power+volume up buttons i instantly get a usb screen. If I could enter it i wouldn't have any problems. Bootloader is locked, when i start up my phone the asus splash screen is black, not white.
Click to expand...
Click to collapse
one thing did you use xFSTK to recover your device recently? what is your model number? send me you device serial number. do not use xFSTK you may brick completely. after boot check with root checker app from app store if you are rooted. as you stated found su binary on device. and revert me back
Hi,
My previous post relates to this one. Due to that problem I got, I had to factory reset my device to get my camera working again. However, instead, my phone rebooted into TWRP and would not boot system normally. When I tried to go to factory mode via fastboot I ended up in endless bootloop. Back in TWRP I tried to restore my backed up ROM from before rooting, but nothing really changed. I am really desperate because I have not find any solutions for my model and I don't want to use other montana models stock ROMs as I suspect them not to be compatible. What shall I do?
Cheers
Six
sixtheninth said:
Hi,
My previous post relates to this one. Due to that problem I got, I had to factory reset my device to get my camera working again. However, instead, my phone rebooted into TWRP and would not boot system normally. When I tried to go to factory mode via fastboot I ended up in endless bootloop. Back in TWRP I tried to restore my backed up ROM from before rooting, but nothing really changed. I am really desperate because I have not find any solutions for my model and I don't want to use other montana models stock ROMs as I suspect them not to be compatible. What shall I do?
Cheers
Six
Click to expand...
Click to collapse
Flash montana_retcn stock rom via rsd lite or fastboot and your device will boot again but it will lose all your files
jvfigueredo said:
Flash montana_retcn stock rom via rsd lite or fastboot and your device will boot again but it will lose all your files
Click to expand...
Click to collapse
Thanks senor, but how do I flash it via fastboot? Can't I use TWRP instead?
jvfigueredo said:
Flash montana_retcn stock rom via rsd lite or fastboot and your device will boot again but it will lose all your files
Click to expand...
Click to collapse
Ok I was able the Stock rom, but it is Chinese, not the global one wihout Gapps and lots of bloatware. Do you know if there is also a GLOBAL stock ROM I can get? Conversely, is there perhaps a custom ROM like Lineage OS or others that is compatible with this device? Cheers
sixtheninth said:
Ok I was able the Stock rom, but it is Chinese, not the global one wihout Gapps and lots of bloatware. Do you know if there is also a GLOBAL stock ROM I can get? Conversely, is there perhaps a custom ROM like Lineage OS or others that is compatible with this device? Cheers
Click to expand...
Click to collapse
Sorry this is the stock rom of montana_retcn, to install the playstore by the store that comes in it, and it has the English language.
The rom that you were supposed to be a shop rom of the store that you bought, mine came with one of this but unfortunately I do not know where it has to download ...
jvfigueredo said:
Sorry this is the stock rom of montana_retcn, to install the playstore by the store that comes in it, and it has the English language.
The rom that you were supposed to be a shop rom of the store that you bought, mine came with one of this but unfortunately I do not know where it has to download ...
Click to expand...
Click to collapse
Ok I guess there is nothing more to be done here. Any custom ROMs are also probably not lying around too I guess :/
sixtheninth said:
Hi,
My previous post relates to this one. Due to that problem I got, I had to factory reset my device to get my camera working again. However, instead, my phone rebooted into TWRP and would not boot system normally. When I tried to go to factory mode via fastboot I ended up in endless bootloop. Back in TWRP I tried to restore my backed up ROM from before rooting, but nothing really changed. I am really desperate because I have not find any solutions for my model and I don't want to use other montana models stock ROMs as I suspect them not to be compatible. What shall I do?
Cheers
Six
Click to expand...
Click to collapse
Turn off the device, boot into Fastboot Flash Mode using vol down + power, using volume keys scroll and select factory mode and device will turn on. the next time you boot up the device, it won't go into TWRP directly. I have faced this issue many times. Hope this helps.
rizwan.mahai said:
Turn off the device, boot into Fastboot Flash Mode using vol down + power, using volume keys scroll and select factory mode and device will turn on. the next time you boot up the device, it won't go into TWRP directly. I have faced this issue many times. Hope this helps.
Click to expand...
Click to collapse
Not in this case. What Factory Mode did was that it got stuck in loading loop playing the Moto logo endlessly for over 5 minutes. Anyway, the phone is now hard bricked so I am facing even larger issue )
sixtheninth said:
Not in this case. What Factory Mode did was that it got stuck in loading loop playing the Moto logo endlessly for over 5 minutes. Anyway, the phone is now hard bricked so I am facing even larger issue )
Click to expand...
Click to collapse
I'm having the same problem with my wifes g5s.
I have found that from twrp>restart>bootloader (phone then enters bootloader) I can the immediately choose "start" to boot the phone.
But that is a hassle I'd prefer my wife not having to go through...
SvenHee said:
I'm having the same problem with my wifes g5s.
I have found that from twrp>restart>bootloader (phone then enters bootloader) I can the immediately choose "start" to boot the phone.
But that is a hassle I'd prefer my wife not having to go through...
Click to expand...
Click to collapse
Flash stock ROM via fastboot problem will be solved..
As far as people who need play store can flash gapps via TWRP as a same method we use for custom ROMs.
P.S. i will not suggest to buy XT1799-2 because this SKU is purely made for Chinese Market, if you need any custom ROM go to Weibo.com/diyroms and post a request to build a custom ROM for this device.
And there are some custom ROMs available that you can search via baidu.com ( Chinese Search Engine).
I will try to find any ROM and post for you guys and also post. Request to build for XT1799-2.
CHEERS
so have you find any global custom rom for this device ?
aamszia said:
so have you find any global custom rom for this device ?
Click to expand...
Click to collapse
Yes you can flash Viper Pie for Xt1792
Already tested at Xt1799
i am on PE and been on Linage and then Derp but for 2 weeks now ive tried to go back to factory and for the life of me nothing works ive tried the All N One Tool and MSM Tool and nothing i constantly end up back where i started.
Ive downloaded the latest os firmware from oneplus All N One Tool Downloads the firmware extrasts it the pops up a error saying flash all .bat is missing so dead end there.
could someone lead me in the right direction or explain to me if im doing something wrong.... thanks
[CLOSED] T-Mobile 7T Conversion to International WITHOUT unlocked bootloader/SIM unlock!
Here is a patched MSM download tool for TMobile OP7T. It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the...
forum.xda-developers.com
this will be my last onepluse thatr for sure going back to Pixel 4 XL didnt have no issues going back to stock this is crazy
I'm having the same issue, so I'm gonna piggyback this in hopes of a different direction.. Long story, short, I've spent hours trying to get back to OOS from crdroid 11. the link above got me back to booting up t-mobile and relocks the bootloader, but wifi radio doesnt work & restarting brings me to being stuck on the boot logo. none of the other MSMtools work, unlocked or TMO from the unbrick page.
what step am i missing after going through the tmo to int. guide? since that's the only thing that's working.. thanks in advance, i'm attempting round 2 in the meantime.
When u r stuck on pink TMobile screen, force reboot to bootloader by holding vol+, vol-, & power buttons for 10 sec. Once you see phone rebooting, let go of power button only to enter bootloader mode. Then type "fastboot reboot fastboot" on PC while USBC cable is plugged into phone. This will kick phone into fastbootD mode. Then fastboot flash all stock rom files.
When wifi and 4g not working, u did not enter fastbootD mode, so system did not flash right
SageChrono said:
I'm having the same issue, so I'm gonna piggyback this in hopes of a different direction.. Long story, short, I've spent hours trying to get back to OOS from crdroid 11. the link above got me back to booting up t-mobile and relocks the bootloader, but wifi radio doesnt work & restarting brings me to being stuck on the boot logo. none of the other MSMtools work, unlocked or TMO from the unbrick page.
what step am i missing after going through the tmo to int. guide? since that's the only thing that's working.. thanks in advance, i'm attempting round 2 in the meantime.
Click to expand...
Click to collapse
Above
HueyT said:
Above
Click to expand...
Click to collapse
i was just coming to edit my post. rookie mistake - i forgot to overwrite adb/fastboot tools everytime i moved the OS files to my adb folder lol... somehow i forgot a bunch of times
phone is booting up without that userspace error, so i may be back in good shape!
edit 2.0: all booted up with wifi/camera working again
well gonna try again for the 4th time this time im gonna use a different computer and see if that works..... UUUGGGG
well the 4th time fail to restore back to stock OOS.. its gotta be something im doing bc i even used a different computer. but gonna keep looking around for another route.
msmdownloaderTool says this (Device Not Match Image) the device seems to time out and disconnects from MSMDownloaderTool every time. any advice i have the global version 7T 1905
HueyT said:
[CLOSED] T-Mobile 7T Conversion to International WITHOUT unlocked bootloader/SIM unlock!
Here is a patched MSM download tool for TMobile OP7T. It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the...
forum.xda-developers.com
Click to expand...
Click to collapse
this would not work for me im assuming bc i have the global HD1905 not the T Mobile branded. u can read above why it wouldn't work . but i seem to have made some progress using the All in One Tool i clicked on flash factory image tab and at first it keep error out saying no Flash-All.bat found after unzipping it. so i kelp looking around and finally foud a factory zip that had the Flash-All.bat file in it so tried again using the Allin One Tool clicked Flash Factory image and it unzipped it and flashed fine but now i cant boot to the OOS it just reboots to the " your bootloader is unlocked integrity screen and stays . but i can boot in fastboot mode and recovery which is now factory recovery. i noticed that it flashed the OOS zip on slot A so i think the reason its not booting up to OOS is bc i need it flased on both slots ??
scoot0073 said:
this would not work for me im assuming bc i have the global HD1905 not the T Mobile branded. u can read above why it wouldn't work . but i seem to have made some progress using the All in One Tool i clicked on flash factory image tab and at first it keep error out saying no Flash-All.bat found after unzipping it. so i kelp looking around and finally foud a factory zip that had the Flash-All.bat file in it so tried again using the Allin One Tool clicked Flash Factory image and it unzipped it and flashed fine but now i cant boot to the OOS it just reboots to the " your bootloader is unlocked integrity screen and stays . but i can boot in fastboot mode and recovery which is now factory recovery. i noticed that it flashed the OOS zip on slot A so i think the reason its not booting up to OOS is bc i need it flased on both slots ??
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
using the " All in One Tool "
Flashing is not allowed for Critical Partitions
is this normal error when flashing back to stock OOS ? when the flashing starts it says this for the first 4 or 5 flashing parts then it stats flashing as described in OP. then it reboots out of fastboot and boots to stock recovery then it finishes the flashing . then at the end it says to press any key to continue and the phone reboots and hangs at the screen that lets me know the bootloader is unlock screen. i flashed both a \b partitions and still does the same thing. its like the boot image is not flashing or im missing something else in the OP to get back to stock OOS.
anyone can help me please ?
"Fastboot reboot fastboot" will enter fastbootD mode to allow flashing system parts
HueyT said:
"Fastboot reboot fastboot" will enter fastbootD mode to allow flashing system parts
Click to expand...
Click to collapse
ok that command worked it successfully Flashed all partitions and when it it it finished it said to press any key to continue .... i did and it rebooted into stock recovery and finished the flashing . then it reboots to the Your Bootloader is unlocked warning and stays there . so i went into recovery and factory reset everything and still hangs at the bootloder unlocked warningthat was all on Slot b so i was like maybe i need to flash both Slots so i switched to slot a active and repeated the whole process above and still nothing hangs again at the bootloader is unlocked warning... ggggrrrrr
what gives..... this is all done using the All in One Tool ... i know im getting close to getting it back to Stock OOS as i made progress with your help.
i then downloaded the factory image from OnePlus site but that was a no go as the zip had only something called Payload which wouldn't flash ..
anymore knowledge u might can share and thank you very much for your help
Go back to fastbootD and flash-all parts manually on A slot, then go to bootloader, type "fastboot set_active other" to go into B slot and repeat fastbootD flashing all parts again. Then go into stock recovery to format data and then reboot
HueyT said:
Go back to fastbootD and flash-all parts manually on A slot, then go to bootloader, type "fastboot set_active other" to go into B slot and repeat fastbootD flashing all parts again. Then go into stock recovery to format data and then reboot
Click to expand...
Click to collapse
that did it im back to all stock oos thank you so much buddy couldn't have doe it without your knowledge. crazy that none of the tools didn't work mine must have been a rare odd ball that i had to flash everything manually.
again thank you.